Vidhibiti vya Kibodi ya MakeCode ndogo
Taarifa ya Bidhaa
Vipimo:
- Mfumo wa Uendeshaji: Windows
- Njia ya Kudhibiti: Vidhibiti vya Kibodi
- Utangamano: Mhariri wa MakeCode
Unda mradi mpya
Katika kihariri cha MakeCode, bonyeza Tab ili kufikia + Mradi Mpya, kisha ubonyeze Enter.
Type a name for your project, then press Enter. 
Washa vidhibiti vya kibodi huzuia
Bonyeza Tab, kisha bonyeza Enter. 
Fungua au funga usaidizi wa vidhibiti vya kibodi
Hold Ctrl and press 
Kidokezo: Ikiwa una nafasi kwenye skrini yako basi weka usaidizi wazi
Udhibiti wa jumla
Nafasi ya kazi: Vidhibiti vya jumla
Katika nafasi ya kazi, tumia vidhibiti vya jumla inavyohitajika
| Kitendo | Njia ya mkato |
| Kata | Ctrl + X |
| Nakili | Ctrl + C |
| Bandika | Ctrl + V |
| Tendua | Ctrl + Z |
| Rudia | Ctrl + Y |
| Open context menu (right-click menu) | Ctrl + Ingiza |
| Nakala | D |
| Next stack of blocks | N |
| Previous stack of blocks | B |
Nenda kwenye eneo: Chaguo 1
Make Code Keyboard Controls Navigate to an area: Option 1
Nenda kwenye eneo: Chaguo 2
Hold Ctrl + B, press Tab to move through the numbers, and then press Enter to confirm.
Nafasi ya kazi: Chagua nafasi ya kazi
Bonyeza kitufe cha W.
Nafasi ya kazi: Fomati (panga) vizuizi
Bonyeza kitufe cha F. 
Access parts of a block
Nafasi ya kazi: Fikia sehemu za kizuizi
Tumia vitufe vya vishale kufikia sehemu tofauti za kizuizi.
Nafasi ya kazi: Move a block
Bonyeza M, kisha utumie vitufe vya vishale kusogeza kizuizi. Bonyeza Enter ili kuthibitisha. 
Nafasi ya kazi: Sogeza kizuizi popote
- Press M, then hold Ctrl and use the arrow keys.
- Bonyeza Enter ili kuthibitisha.
Nafasi ya kazi: Tenganisha kizuizi
Bonyeza X ili kutenganisha kizuizi 
Workspace: Delete a block
Press Delete or BackSpace to remove a block 
Nafasi ya kazi: Badilisha au uthibitishe
Press Enter or Space to confirm an action 
Nafasi ya kazi: Zuia urambazaji
Tumia vitufe vya vishale kusogeza kwenye vizuizi
Sanduku la zana: Fikia kisanduku cha zana
Bonyeza T au ushikilie Ctrl + B kisha ubonyeze 3 
Sanduku la zana: Urambazaji
Tumia vitufe vya vishale kusogeza kategoria na vizuizi 
Sanduku la zana: Chagua au uthibitishe kizuizi
Bonyeza Enter au Space ili kuchagua kizuizi 
Toolbox: Search
- In the toolbox (T), start typing the name of a block.
- Press Enter to move to results.
- Press down arrows to select a block. Press Enter to confirm.
Specific blocks: Show LEDs block
- Use right arrow key then Enter to access LED editor.
- Use arrows to navigate LEDs.
- Press Enter to turn LED on and off.
- Press Esc to exit.
Specific blocks: Play melody
- Use right arrow to move to the melody. Press Enter to open melody.
- Press Tab to edit melody. Use arrows to select a note.
- Press Enter to confirm note.
- When finished, Tab to Done and press Enter.
Ndogo:bit Educational Foundation mbit.io/makecode-keys This content is published under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) licence
Maswali Yanayoulizwa Mara Kwa Mara
Ninawezaje kupata sehemu tofauti za kizuizi kwenye nafasi ya kazi?
Use the arrow keys to navigate through different parts of a block.
Ninawezaje kufuta kizuizi kwenye nafasi ya kazi?
To delete a block, press Delete or BackSpace.
Nyaraka / Rasilimali
 |
Vidhibiti vya Kibodi ya MakeCode ndogo [pdf] Mwongozo wa Mmiliki Vidhibiti vya Kibodi ya MakeCode, Vidhibiti vya Kibodi, Vidhibiti |