mikro bit MakeCode klaviatura boshqaruvlari
Mahsulot haqida ma'lumot
Texnik xususiyatlari:
- Operatsion tizim: Windows
- Boshqarish usuli: klaviatura boshqaruvlari
- Moslik: MakeCode Editor
Yangi loyiha yarating
MakeCode muharririda + Yangi loyihaga kirish uchun Tab tugmasini bosing, keyin Enter tugmasini bosing.
Type a name for your project, then press Enter. 
Klaviatura bloklari boshqaruvlarini yoqing
Tab tugmasini bosing, keyin Enter tugmasini bosing. 
Klaviatura boshqaruvlarini ochish yoki yopish yordam beradi
Hold Ctrl and press 
Maslahat: Agar ekraningizda boʻsh joy boʻlsa, yordamni ochiq saqlang
Umumiy nazorat
Ish maydoni: Umumiy boshqaruv elementlari
Ish maydonida kerak bo'lganda umumiy boshqaruv vositalaridan foydalaning
| Harakat | Yorliq |
| Kesish | Ctrl + X |
| Nusxalash | Ctrl + C |
| joylashtirish | Ctrl + V |
| Bekor qilish | Ctrl + Z |
| Qayta qiling | Ctrl + Y |
| Open context menu (right-click menu) | Ctrl + Kirish |
| Dublikat | D |
| Next stack of blocks | N |
| Previous stack of blocks | B |
Hududga o'ting: 1-variant
Make Code Keyboard Controls Navigate to an area: Option 1
Hududga o'ting: 2-variant
Hold Ctrl + B, press Tab to move through the numbers, and then press Enter to confirm.
Ish maydoni: Ish joyini tanlang
W tugmasini bosing.
Ish maydoni: bloklarni formatlash (tartibga solish).
F tugmasini bosing. 
Access parts of a block
Ish maydoni: blok qismlariga kirish
Blokning turli qismlariga kirish uchun o'q tugmalaridan foydalaning.
Ish maydoni: Move a block
Blokni siljitish uchun M tugmasini bosing, so‘ng o‘q tugmalaridan foydalaning. Tasdiqlash uchun Enter tugmasini bosing. 
Ish maydoni: blokni istalgan joyga ko'chiring
- Press M, then hold Ctrl and use the arrow keys.
- Tasdiqlash uchun Enter tugmasini bosing.
Ish maydoni: blokni ajratib oling
Blokni uzish uchun X tugmasini bosing 
Workspace: Delete a block
Press Delete or BackSpace to remove a block 
Ish maydoni: Tahrirlash yoki tasdiqlash
Press Enter or Space to confirm an action 
Ish maydoni: navigatsiyani bloklash
Bloklarni kezish uchun o'q tugmalaridan foydalaning
Asboblar qutisi: asboblar qutisiga kiring
T yoki Ctrl + B tugmalarini bosib ushlab turing, so'ng 3 ni bosing 
Asboblar qutisi: Navigatsiya
Kategoriyalar va bloklar bo'ylab harakatlanish uchun o'q tugmalaridan foydalaning 
Asboblar qutisi: Blokni tanlang yoki tasdiqlang
Blokni tanlash uchun Enter yoki Space tugmasini bosing 
Toolbox: Search
- In the toolbox (T), start typing the name of a block.
- Press Enter to move to results.
- Press down arrows to select a block. Press Enter to confirm.
Specific blocks: Show LEDs block
- Use right arrow key then Enter to access LED editor.
- Use arrows to navigate LEDs.
- Press Enter to turn LED on and off.
- Press Esc to exit.
Specific blocks: Play melody
- Use right arrow to move to the melody. Press Enter to open melody.
- Press Tab to edit melody. Use arrows to select a note.
- Press Enter to confirm note.
- When finished, Tab to Done and press Enter.
Mikro:bit Educational Foundation mbit.io/makecode-keys This content is published under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) licence
Tez-tez so'raladigan savollar
Ish joyidagi blokning turli qismlariga qanday kirish mumkin?
Use the arrow keys to navigate through different parts of a block.
Ish joyidagi blokni qanday o'chirish mumkin?
To delete a block, press Delete or BackSpace.
Hujjatlar / manbalar
 |
mikro bit MakeCode klaviatura boshqaruvlari [pdf] Foydalanuvchi qo'llanmasi MakeCode klaviatura boshqaruvlari, klaviatura boshqaruvlari, boshqaruv elementlari |