Netzer DS-40 Rotary Encoder zuru oke

Nchekwa ESD

Dị ka ọ dị na mbụ maka sekit eletrọnịkị, n'oge njikwa ngwaahịa emetụla sekit eletrọnịkị, wires, njikọ ma ọ bụ sensọ na-enweghị nchebe ESD dabara adaba. Onye nrụpụta / onye ọrụ ga-eji ngwa ESD zere ihe egwu nke mmebi sekit.

Ngwaahịa gafereview

gafereview
Ọnọdụ zuru oke DS-40 Electric Encoder ™ bụ ihe mmetụta ọnọdụ mgbanwe emebere maka ngwa dị egwu gburugburu ebe obibi. Ugbu a ọ na-arụ ọrụ n'ọtụtụ ngwa dị iche iche, gụnyere nchekwa, nchekwa ala nna, ikuku ikuku na akpaaka ahụike na ụlọ ọrụ mmepụta ihe.
Teknụzụ na-abụghị kọntaktị elektrọnik ™ dabere na mmekọrịta dị n'etiti ntugharị a tụrụ atụ na oghere eletrik agbanwere ohere/oge.
DS-40 Electric Encoder™ bụ ọkara modular, ya bụ, rotor na stator dị iche, ebe stator na-edobe rotor ahụ n'enweghị nsogbu.

1. Encoder stator
2. rotor koodu
3. Ntị na-ebuli koodu
4. eriri koodu

chaatị eruba nwụnye 

Ntinye koodu 

Rotor encoder (2) na-ejikọta na ogwe ndị ọbịa site na ịpị ya n'ubu raara onwe ya nye (b). Ihe nkedo na ihe nzacha ma ọ bụ iyi okirikiri na ihe ncha na njedebe nke ubu na-edozi nrụgide. The encoder stator (1) gbadoro ụkwụ site na okirikiri okirikiri (a) wee tinye ya na stator nnabata (c) na-eji skru M2 atọ, torque nke 0.3Nm tụrụ aro.

Mara: Ejila ihe mkpuchi mkpuchi nwere Cyanoacrylate nke na-emekọ ihe ike na ahụ mmetụta nke Ultem.

Encoder stator / Rotor ọnọdụ ikwu
Ya mere rotor na-ese n'elu mmiri, maka nrịgo axial kwesịrị ekwesị, anya "H" n'etiti ubu ubu (b) na stator mounting recess (a) kwesịrị ịbụ ± 0.05 mm n'ọnụ. Mwepu nke nkwụghachi ụgwọ ọrụ igwe site na rotor shims, anya a tụrụ aro bụ ± 0.05 mm. Nke kacha mma akwadoro ampụkpụrụ litude dị n'etiti oke dị ka ndị egosiri na ngwanrọ Encoder Explorer ma dị iche iche dabere na ụdị koodu.1

DS-40 ampakwụ ụgwọ litudes:
Mechanically kwụọ ụgwọ site na iji 50 um shims n'okpuru rotor (dị ka ngwa DS40-R-00).
Nyochaa mgbago rotor kwesịrị ekwesị site na iji ngwaọrụ Encoder Explorer "Onye nyocha akara" ma ọ bụ "Nnwale nrụnye igwe."

Iwepu ngwongwo

Usoro ọkọlọtọ
Ngwugwu ọkọlọtọ DS-40 nwere ihe ngbanwe nwere eriri 250mm shilded AWG30.

Ngwa nhọrọ:

1. DS-40-R-00 Kit, Rotor arịọnụ shims: x10 igwe anaghị agba nchara 50um oké rotor arịọnụ shims.
2. Kit MA-DS40-004, njedebe nke ngwa nrụnye aro steepụ (3 screw M2x4, washer).
3. MA-DS40-004 Kit, njedebe nke ngwa nrụnye aro dị nro (3 screw M2x4, spring, C- ring).
4. Ngwa EAPK008, skru na-arị elu (3 kposara M2x6).
5. CNV-0003 RS-422 ka USB Ntụgharị (ya na USB esịtidem 5V ike ọkọnọ ụzọ).
6. NanoMIC-KIT-01, RS-422 na onye ntụgharị USB nwere interface dijitalụ zuru oke maka ma NCP & SSI / Biss dị elu na AqB (ya na USB esịtidem 5V ike ọkọnọ ụzọ).
7. DKIT-DS-40-SF, mgbakwasa SSI koodu n'elu rotary jig, RS-422 gaa na USB ntụgharị na eriri.
8. DKIT-DS-40-Ọ BỤRỤ, Nkwanye BiSS koodu na rotary jig, RS-422 gaa na USB Ntụgharị na eriri.

Njikọ eletrik

Isi nke a reviewNke a bụ usoro achọrọ iji jikọọ ihe ngbanwe na eletriki na interface dijitalụ (SSi ma ọ bụ BiSS-C).

Na-ejikọta koodu ntinye
Ihe ngbanwe ahụ nwere ụdị ọrụ abụọ:

Ọnọdụ zuru oke karịa SSi ma ọ bụ BiSS-C:
Nke a bụ ụkpụrụ ndabara ike elu:

SSi/BiSS interface wires koodu agba

Elekere +	Agba ntụ	Elekere
Elekere -	Acha anụnụ anụnụ
Data -	Odo	Data
Data +	Akwụkwọ ndụ akwụkwọ ndụ
GND	Nwa	Ala
+5V	Uhie	Ịnye ọkụ

Mepụta ọnọdụ n'elu NCP (Netzer Communication Protocol)
Ụdị ọrụ a na-enye ohere site na USB na PC na-agba Netzer Encoder Explorer ngwa (na MS Windows 7/10). Nzikọrịta ozi bụ site na Netzer Communication Protocol (NCP) n'elu RS-422 na-eji otu eriri waya.
Jiri ọrụ ntụtụ na-esote iji jikọọ koodu ntinye na njikọ ụdị 9-pin D na onye ntụgharị RS-422/USB CNV-0003 ma ọ bụ NanoMIC.

Ihe ngbanwe eletriki eletrik, D Ụdị 9 pin Nwanyị

Nkọwa	Agba	Ọrụ	Ntụtụ No
SSi elekere / NCP RX	Agba ntụ	Elekere / RX +	2
	Acha anụnụ anụnụ	Elekere / RX -	1
Data SSi / NCP TX	Odo	Data/TX –	4
	Akwụkwọ ndụ akwụkwọ ndụ	Data / TX +	3
Ala	Nwa	GND	5
Ịnye ọkụ	Uhie	+5V	8

Njikọ eletrik na grounding
Ihe ngbanwe ahụ anaghị abịa na eriri na njikọ akọwapụtara, agbanyeghị, lelee nleba anya n'ala:

1. Ọta eriri anaghị ejikọta na eriri nlọghachi ọkụ.
2. Gbanye ogwe ndị ọbịa ka ịzenarị nnyonye anya site na sistemu nnabata, nke nwere ike bute mkpọtụ n'ime koodu koodu.

Mara: 4.75 ruo 5.25 VDC ike ọkọnọ chọrọ

Nwụnye ngwanrọ

Ngwanrọ elektrọnik Explorer (EEE):

• Na-enyocha mmezi mgbago igwe
• Nhazi mmezi
• Na-ahazi nyocha izugbe na mgbaàmà

Isi nke a reviews usoro ejikọtara na ịwụnye ngwa ngwa EEE.

Ihe achọrọ kacha nta

• Sistemụ nrụọrụ: MS windows 7/10, (32/64 bit)
• Ebe nchekwa: 4MB kacha nta
• ọdụ ụgbọ mmiri nkwukọrịta: USB 2
• Windows .NET Framework, V4 kacha nta

Ịwụnye ngwanrọ 

• Gbaa ihe nchọta Electric Encoder™ file hụrụ na Netzer websaịtị: Encoder Explorer Ngwaọrụ Software
• Mgbe echichi gasịrị, ị ga-ahụ akara sọftụwia Electric Encoder Explorer na desktọpụ kọmputa.
• Pịa akara ngosi sọftụwia Electric Encoder Explorer ka ịmalite.

Jikọọ Netzer encoder na onye ntụgharị, jikọọ onye ntụgharị na kọmpụta ma mee ngwa sọftụwia Electric Encoder Explorer.

Nkwanye nkwenye

Malite Encoder Explorer
Gbaa mbọ hụ na ịmechaa ọrụ ndị a nke ọma:

• Nkwanye igwe
• Njikọ Ọdụdọ
• Njikọ njikọ maka nhazi nhazi
• Encoder Chọgharịa nwụnye Software

Gbaa ngwa eletriki Encoder Explorer (EEE)
Gbaa mbọ hụ na nzikọrịta ozi nke ọma na ihe ngbanwe: (Ụdị nhazi site na defoult).

• (a) Ogwe ọkwa na-egosi nzikọrịta ozi na-aga nke ọma.
• (b) Ngosipụta data nzuzo na mpaghara data koodu. (CAT No., Serial No.)
• (c) Ngosipụta ọkpụkpọ oku ọnọdụ na-anabata ntụgharị aro.

Nyocha nrụnye igwe
Nkwenye nrụnye nke igwe na-enye usoro ga-eme ka mgbago igwe kwesịrị ekwesị site na ịnakọta data raw nke ọwa dị mma na nke na-adịghị ahụkebe n'oge ntụgharị.

• (a) Họrọ [Mechanical Mounting Verification] na isi ihuenyo.
• (b) Họrọ [Malite] ka ibido nnakọta data.
• (c) Tụgharịa aro ka ị nakọta data ọwa dị mma na nke na-enweghị isi.
• (d) Na njedebe nke nkwenye na-aga nke ọma, SW ga-egosi "Nwụnye Mechanical ziri ezi."
• (e) Ọ bụrụ na SW na-egosi "Nwụnye Mechanical na-ezighi ezi," dezie ọnọdụ igwe rotor, dị ka e gosipụtara na paragraf 3.3 - "Ọnọdụ Mmekọrịta Rotor."

nhazi nhazi

Njirimara ọhụrụ
Agbanyere nhọrọ nhazi nke onwe. Rụtụ aka na akwụkwọ: Auto-calibration-feature-user-manual-V01

Mmezi mmezi
Maka ịrụ ọrụ kacha mma nke ndị na-ahụ maka eletriki eletrik, a ga-akwụ ụgwọ mgbama sine na cosine nke DC na-apụghị izere ezere na mpaghara arụ ọrụ.
Mgbe ịmechara usoro nkwenye mgbakwasa nke ọma:

• (a) Họrọ [Calibration] na ihuenyo isi.
• (b) Malite nweta data mgbe ị na-atụgharị osisi.
  Ogwe ọganihu (c) na-egosi ọganihu nchịkọta. Tụgharịa axis mgbe niile n'oge nchịkọta data-kpuchie ngalaba na-arụ ọrụ nke ngwa na njedebe na njedebe-na ndabara usoro a na-anakọta 500 isi n'elu 75 sekọnd. Ọsọ ntụgharị abụghị oke n'oge nchịkọta data. Ngosipụta nnakọta data na-egosi maka ọwa dị mma/nke na-adịghị ahụkebe, okirikiri “mkpa” pụtara ìhè n'etiti (d) (e) yana mwepu ụfọdụ.

Akwụghachi ụgwọ dị mma / Corse ọwa

• Ntugharị igwe zuru oke - mmegharị mkpanaka agafeela esemokwu - akwadoro.
• Ngalaba nwere oke - kọwapụta ọrụ nke ogwe aka n'akụkụ oke akọwapụtara site na ogo ma ọ bụrụ na <10deg
• N'efu sampụdịdị ling – kọwapụta ọnụọgụ ngụkọ ngụkọ n'ime igbe ederede. Sistemu na-egosiputa ọnụọgụ isi ihe akwadoro na ndabara. Chịkọta opekempe isi itoolu karịa ngalaba ọrụ.
• Pịa bọtịnụ [Malite Calibration] (b)
• Ọnọdụ (c) na-egosi ọrụ ọzọ achọrọ; ọnọdụ mmegharị shaft; ọnọdụ dị ugbu a, na ọnọdụ ebumnuche na-esote nke a ga-atụgharị na koodu ntinye.
• Tụgharịa shaft/encoder gaa n'ọkwa ọzọ wee pịa bọtịnụ [Gaa n'ihu] (c)
  • ogwe kwesịrị ịdị na STAND STILL n'oge nchịkọta data. Soro ihe ngosi/mmekọrịta n'oge usoro cyclic maka idobe aro -> kwụrụ otu ebe -> ngụkọta oge.
• Tinyegharịa nzọụkwụ dị n'elu maka isi ihe niile akọwapụtara. Mechaa (d)
• Pịa bọtịnụ [Chekwa na Gaa n'ihu] (e).

Nzọụkwụ ikpeazụ na-echekwa paramita CAA na-emebi emebi, na-emecha usoro nhazi.

Ịtọ ntọala ihe ngbanwe ebe efu
Enwere ike ịkọwa ọnọdụ efu ebe ọ bụla na mpaghara ọrụ. Tụgharịa ogwe ahụ gaa n'ọkwa efu efu achọrọ.
Gaa na bọtịnụ "calbration" na n'elu menu mmanya, pịa "Tọọ UZP".
Họrọ "Tọọ ọnọdụ ugbu a" ka efu site na iji nhọrọ dabara adaba, wee pịa [N'ikpeazụ].

Nnwale jitter
Mee ule jitter iji nyochaa ogo nke nrụnye; ule jitter na-egosi ọnụ ọgụgụ ọgụgụ nke ọgụgụ ọgụgụ zuru oke (ọnụọgụ) n'ime oge. Jitter nkịtị kwesịrị ịdị elu +/- 3 ọnụ; Jitter dị elu nwere ike igosi mkpọtụ sistemụ.

Ọ bụrụ na agbasaghị data ọgụgụ (ntụpọ na-acha anụnụ anụnụ) n'otu n'otu na okirikiri dị mkpa, ị nwere ike nweta "mkpọtụ" na ntinye gị (lelee shaft/stator grounding).

Ụdị ọrụ

SSi / BiSS
Ngosipụta ọnọdụ ọrụ nke SSi/BiSS Encoder interface dị site na iji NanoMIC. Maka ozi ndị ọzọ gụọ gbasara NanoMIC na Netzer webSaịtị a na-arụ ọrụ na-egosi “ezigbo” SSi/BiSS interface nwere ọnụego elekere 1MHz.

• Protocol SSi
• Protocol BiSS

Ihe osise igwe

Ịdọ aka ná ntị
Ejila Loctite ma ọ bụ gluu ndị ọzọ nwere Cyanoacrylate. Anyị na-akwado iji gluu 3M - Scotch-WeldTM Epoxy Adhesive EC-2216 B/A.

Akwụkwọ / akụrụngwa

Netzer DS-40 Rotary Encoder zuru oke [pdf] Akwụkwọ ntuziaka onye ọrụ DS-40 zuru oke Rotary Encoder, DS-40, DS-40 Rotary Encoder, Rotary Encoder zuru oke, Rotary Encoder, Encoder zuru oke, ihe mkpuchi.

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ