WM SYSTEMS WM-E LCB IoT Load Control Switch

INTERFACES

• Fais fab mov - AC zog input, 2-pins davhlau ya nyob twg thaiv
• Relay 1..2 - latching relay, 16A 250V AC, hloov hom: TSIS TAU, NC, COM, davhlau ya nyob twg thaiv
• Relay 3..4 - latching relay, 16A 250V AC, hloov hom: NC, COM, davhlau ya nyob twg thaiv
• RJ45 connector nta:
  • Ethernet - 10/100MBit, RJ45 chaw nres nkoj, los ntawm UTP Cat5 cable
  • RS485 - rau cov khoom siv sab nraud los ntawm Y-shaped cable
  • P1 interface - rau cov ntsuas ntse los ntawm Y-shaped cable
• LED1..LED4/WAN - Cov xwm txheej LEDs
• SIM – Push insert SIM daim npav qhov (mini SIM, hom 2FF) micro-SD daim npav qhov – rau daim npav nco (max. 32 GByte)
• Sab hauv LTE Kav hlau txais xov - nplaum, nto mountable

TAM SIM NO & CONSUMPTION / OPERATING CONDITIONS

• Lub zog tawm tswv yim: ~ 100-240V AC, + 10% / -10%, 50-60Hz +/- 5%
• Kev siv: tsawg: 3W / Nruab Nrab: 5W / Max: 9W (0.25A)
• Cellular module xaiv:
  • LTE Cat.1: Telit LE910C1-EUX (LTE Cat.1: B1, B3, B7, B8, B20, B28A / 3G: B1, B3, B8 / 2G: B3, B8)
  • LTE Cat.M / Cat.NB: Telit ME910C1-E1 (LTE M1 & NB1 B3, B8, B20)
• Kev khiav hauj lwm / cia kub: ntawm -40'C thiab +85'C, 0-95% rel. av noo
• Loj: 175 x 104 x 60 mm / Luj: 420g
• Enclosure: IP52 ABS yas nrog pob tshab npog npog, tuaj yeem ntsia tau rau ntawm kev tsheb nqaj hlau / rau phab ntsa

  

SCHEMATIC daim duab ntawm INTERFACES, PINOUT

CEEB TOOM! TSIS TXAUS SIAB ~ 100-240V AC POWER SOURCE rau pigtail AC CONNECTOR (24) LOSSIS LUB POWER INPUT (12) ntawm cov khoom siv kom txog rau thaum koj tsis ua tiav nrog cov xaim!
Thaum QHOV CHAW UA HAUJ LWM, Nco ntsoov xyuas kom meej tias PCB tsis txuas nrog lub zog hluav taws xob thiab cov supercapacitors tau tag nrho (LED SIGNALS yog INACTIVE) ua ntej kov lub PCB!

INSTALLATION SIAB

1. Tshem cov yas, pob tshab chaw nres nkoj sab saum toj npog tiv thaiv (1) los ntawm kev tso cov ntsia hlau (3) los ntawm sab saum toj ntawm lub thawv.
2. Xaub cov yas ntu (1) ua tib zoo nyob hauv qab ntawm lub hauv paus (2), tom qab ntawd tshem lub hau saum toj kawg nkaus (1).
3. Tam sim no koj tuaj yeem txuas cov xov hlau thiab cables mus rau cov chaw nres nkoj thiab cov interfaces. Ua tib zoo qhib cov yas hooks (12) ntawm lub hauv paus enclosure (2) los ntawm ib tug ntswj ntsia hlau.
4. Tam sim no lub hauv paus yas tuaj yeem pom nrog PCB sib dhos (4) sab hauv. Qhib lub PCB (4) thiab tshem tawm ntawm lub hauv paus (2), ces tig lub PCB upside down. Tam sim no koj tuaj yeem pom sab hauv qab ntawm PCB.
5. Ntxig ib daim npav SIM mini (ua haujlwm nrog APN) rau hauv tus tuav SIM (23). Xyuas daim duab ntawm nplooj ntawv tom ntej: SIM txiav ntug yuav tsum tau taw qhia rau PCB thiab SIM nti ntsia. Ntxig thiab thawb lub SIM kom txog thaum nws yuav nrawm (koj yuav hnov ​​​​ib lub suab nyem).
6. Koj tuaj yeem siv daim npav micro-SD yog tias koj xav tau (yeem). Tom qab ntawd ntxig daim npav nco mus rau hauv lub mini-SD daim npav qhov (22) thiab thawb kom txog thaum nws yuav raug kaw kom ruaj ntseg.
7. Tam sim no tig rov qab PCB thiab tso rov qab rau hauv lub hauv paus (2).
8. Xyuas ntawm PCB tias LTE kav hlau txais xov cable (16) txuas nrog Antenna RF connector (15).
9. Muab qhov rov qab tshem tau dawb ABS yas sab saum toj rau hauv paus (2) - xyuas tias cov hooks (12) kaw.
10. Ua cov xaim raws li qhov xav tau - raws li daim duab schematic (saum toj no).
11. Txuas lub AC fais fab chord (AC pigtailed connector) xov hlau (24) rau thawj ob tus pins (5) ntawm lub cuab yeej (los ntawm sab laug mus rau sab xis): dub rau N (neutric), liab rau L (kab).
12. Txuas lub teeb pom kev zoo relay nyob ntawm tej (25) ntawm txoj kev lub teeb txee lub thawv - mus rau qhov yuav tsum tau relay outputs (6).
    Nco ntsoov tias RELAY 1..2 yog latching relays, uas tso cai rau NO, NC, COM kev twb kev txuas thiab hloov hom, thaum lub RELAY 3..4 tsuas muaj NC, COM kev twb kev txuas thiab hloov hom.
13. Txuas lub Y-shaped UTP cable (27) - rau Ethernet / RS485 / P1 - lossis ncaj qha UTP cable (26) - rau Ethernet nkaus xwb - rau RJ45 chaw nres nkoj (7) - raws li qhov xav tau. Lwm sab ntawm Ethernet cable yuav tsum txuas nrog koj lub PC lossis lwm yam khoom siv uas koj xav txuas.
    Nco ntsoov, hais tias RS485 / P1 interface xov hlau yog standalone lub tes tsho viav vias hlau (28).

    

14. Txuas lub RS485 rau cov khoom siv sab nraud. Lub P1 interface yog muaj rau kev txuas lub ntsuas hluav taws xob / smart metering modem.
15. Muab cov yas pob tshab sab saum toj npog (1) mus rau hauv paus (2).
16. Cov cuab yeej enclosure muaj ob hom fixation, uas yuav tsum tau npaj rau mount rau rail los yog siv ib tug 3-point fixation los ntawm screws, los yog siv tus nuv (nyob rau hauv dai txoj hauj lwm rau ib tug phab ntsa / rau hauv txoj kev lub teeb txee lub thawv).
17. Txuas lub 100-240V AC fais fab mov rau lub pigtail connector ntawm AC fais fab cable (24) thiab mus rau lub hwj chim sab nraud / hluav taws xob ntsaws.
18. Cov cuab yeej muaj pre-installed system. Cov xwm txheej tam sim no ntawm lub cuab yeej yog qhia los ntawm nws lub teeb LED (11).
    • LED teeb - Txheeb xyuas phau ntawv Installation kom paub ntxiv.
    • REL.1: Relay # 1 (hom: TSIS TAU, NC, COM) SET/RESET muaj
    • REL.2: Relay # 2 (hom: TSIS TAU, NC, COM) SET/RESET muaj
    • REL.3: Relay # 3 (hom: NC, COM) tsis muaj RESET tus pin, SET negated
    • REL.4: Relay # 4 (hom: NC, COM) tsis muaj RESET tus pin, SET negated
    • WAN LED: rau kev sib txuas network (LAN / WAN kev ua ub no)
      Nco ntsoov, hais tias lub cuab yeej muaj supercapacitor tivthaiv sab hauv, uas muab kev nyab xeeb kaw thaum lub hwj chim outage. Yog muaj zog otage - vim yog lub supercapacitors - muaj lub zog txaus los muab kev nyab xeeb kev sib txuas thiab kaw (ua ntej lub supercapacitors yuav tas).
      Lub supercapacitor tuaj yeem raug tso tawm tom qab outage lossis yog tias koj khaws lub cuab yeej rau lub hlis yam tsis tau txuas lub zog. Nws yuav tsum tau them ua ntej siv

      

Pib lub cuab yeej

1. Thaum lub hwj chim ntawm lub cuab yeej, lub recharge ntawm lub supercapacitor yuav pib txiav. Cov cuab yeej system yuav pib tsuas yog tom qab qhov kawg ntawm cov txheej txheem them nqi.
2. Txuas lub Ethernet (UTP) cable ntawm lub cuab yeej RJ45 interface lossis nws cov Y-shaped cable adapter thiab koj lub PC Ethernet chaw nres nkoj. (Lub RS485 ntaus ntawv yuav tsum tau txuas mus rau nws Y-zoo li tus cable lwm qhov chaw nres nkoj.)
3. Txhim kho Ethernet interface hauv koj lub PC rau TCP/IPv4 raws tu qauv rau teeb tsa tus IP chaw nyob: 192.168.127.100 thiab subnet npog: 255.255.255.0
4. Pib lub cuab yeej los ntawm kev ntxiv lub zog AC rau lub zog hluav taws xob (5).
5. Tag nrho plaub lub LEDs yuav dawb paug rau ob peb feeb - nws qhov qub. (Yog tias lub cuab yeej tsis tau siv ntev, lub supercapacitors yuav tsum tau them ua ntej lub microcontroller tuaj yeem pib lub cuab yeej.)
6. Tom qab ob peb feeb xwb WAN LED yuav teeb pom kev txuas ntxiv los ntawm liab kom txog thaum lub supercapacitors yuav raug them (lub cuab yeej tseem tsis tau pib). Nws tuaj yeem siv li 1-4 feeb.
7. Thaum cov nqi them tas lawm, lub cuab yeej yuav pib. Nws yuav raug kos npe los ntawm teeb pom kev liab liab ntawm tag nrho cov relay LEDs (REL.1..4) rau 3 vib nas this thiab los ntawm WAN LED uas yog teeb pom kev ntsuab sai sai. Qhov no txhais tau hais tias lub cuab yeej tau pib lawm.
8. Tsis ntev los no, thaum WAN LED yuav dawb paug thiab tag nrho cov relay LEDs (REL.1..4) yuav txuas ntxiv teeb pom kev zoo los ntawm liab *, uas txhais tau hais tias lub cuab yeej tam sim no booting. Nws yuav siv sij hawm li 1-2 feeb.*Nco ntsoov, yog tias koj twb txuas ib relay, uas yuav kos npe rau tam sim no raws li txoj cai ntawm relay los ntawm nws txoj cai (liab txhais tau tias hloov OFF, ntsuab txhais tau tias switched ON).
9. Thaum kawg ntawm cov txheej txheem khau raj lub cuab yeej tuaj yeem ncav cuag ntawm nws lub network interfaces (LAN thiab WAN) yog tias lawv tau teeb tsa lawm. Yog tias lub network tam sim no muaj, nws tau kos npe los ntawm WAN LED teeb liab.
10. Thaum lub cuab yeej siv tau ntawm qhov teeb tsa LAN interface, WAN LED yuav teeb pom kev txuas ntxiv los ntawm ntsuab. (Yog hais tias nws yog flashing ceev, nws kos npe rau network kev ua si ntawm lub interface.)
    • Thaum WAN interface twb tau teeb tsa, thiab APN txuas nrog, WAN LED yuav teeb pom kev liab. (Yog tias nws flashing ceev, nws kos npe rau kev ua haujlwm hauv network.)
    • Yog tias LAN thiab WAN siv tau, WAN LED yuav ua haujlwm los ntawm ob xim (liab thiab ntsuab tib lub sijhawm), pom meej los ntawm daj. Flashing kos npe ua haujlwm network.

CONFIGURING TSHUAB

1. Qhib lub cuab yeej hauv zos website hauv Mozilla Firefox browser, qhov twg lub neej ntawd web user interface (LuCi) chaw nyob ntawm Ethernet chaw nres nkoj yog: https://192.168.127.1:8888
2. Nkag mus nrog tus neeg siv lub npe: hauv paus , Lo lus zais: wmrpwd thiab nias rau lub pob nkag mus.
3. Configure SIM card's APN settings: qhib Network / Interfaces menu, WAN interface, Kho kom raug khawm.
4. Sau lub SIM # 1 APN (APN teeb tsa ntawm koj daim npav SIM). Yog tias koj muaj tus lej PIN ntawm SIM daim npav uas koj siv, ntxiv tus lej PIN ntawm no. (Nug koj tus neeg teb xov tooj txawb.)
5. Nyem rau khawm Txuag & Thov khaws cov chaw thiab teeb tsa lub cellular module. Tsis ntev (~ 10-60 vib nas this) cellular module yuav raug teeb tsa hais txog qhov chaw tshiab.
6. Tom qab ntawd lub cuab yeej yuav sim txuas thiab sau npe SIM rau hauv lub network. Qhov muaj ntawm lub xov tooj ntawm tes yuav raug kos npe los ntawm WAN LED (lighing / flashing los ntawm ntsuab - ua ke nrog Ethernet LED, pom tau tias daj (liab + ntsuab LED ua haujlwm tib lub sijhawm). Nws yuav muaj cov ntaub ntawv khiav ntawm WAN interface - xyuas ntawm Rx/Tx qhov tseem ceeb.view zaub mov, Network ib feem kom paub meej ntxiv.
7. Txhawm rau teeb tsa RS485 teeb tsa, nyeem phau ntawv Neeg Siv.

COV NTAUB NTAWV & KEV PAB CUAM

Cov ntaub ntawv tuaj yeem pom ntawm cov khoom webqhov chaw: https://m2mserver.com/en/product/wme-lcb/
Nyob rau hauv cov ntaub ntawv ntawm cov khoom thov kev pab txhawb nqa, nug peb cov kev txhawb nqa ntawm lub iotsupport@wmsystems.hu email chaw nyob lossis tshawb xyuas peb qhov kev txhawb nqa website rau kev sib cuag ntxiv thov: https://www.m2mserver.com/en/support/

Cov khoom no tau cim nrog CE cim raws li European cov cai.
Lub cim hla lub log log txhais tau hais tias cov khoom kawg ntawm nws lub neej yuav tsum tau muab pov tseg nrog cov khoom pov tseg hauv tsev nyob hauv European Union. Tsuas yog muab cov khoom siv hluav taws xob / hluav taws xob pov tseg hauv cov phiaj xwm sib sau ua ke, uas ua rau kev rov qab los thiab rov ua dua ntawm cov khoom muaj nyob hauv. Qhov no yog hais txog tsis tsuas yog rau cov khoom, tab sis kuj rau tag nrho lwm yam accessories cim nrog tib lub cim.

Cov ntaub ntawv / Cov ntaub ntawv

WM SYSTEMS WM-E LCB IoT Load Control Switch [ua pdf] Daim ntawv qhia kev teeb tsa WM-E LCB IoT Load Control Hloov, WM-E LCB, IoT Load Control Hloov, Load Control Hloov, Tswj Hloov, Hloov

Cov ntaub ntawv

• Cov neeg siv phau ntawv