IINKQUBO ze-WM ze-WM-E LCB IoT yokuLawula ukuLawulwa koLawulo

IZIBONELELO

• Ukunikezelwa kwamandla - igalelo lamandla e-AC, ibhloko ye-terminal ye-2-pins
• I-Relay 1..2 - i-latching relay, i-16A 250V AC, iindlela zokutshintsha: NO, NC, COM, ibhloko ye-terminal
• I-Relay 3..4 - i-latching relay, i-16A 250V AC, imodi yokutshintsha: NC, COM, ibhloko ye-terminal
• Iimpawu zokudityaniswa kwe-RJ45:
  • I-Ethernet - 10/100MBit, i-RJ45 port, nge-UTP Cat5 cable
  • I-RS485 - yezixhobo zangaphandle ngentambo emise okwe-Y
  • I-interface ye-P1 - yeemitha ezihlakaniphile ngentambo emise okwe-Y
• I-LED1..LED4/WAN - Ii-LED zesimo
• I-SIM - Push faka i-SIM khadi slot (i-SIM encinci, uhlobo lwe-2FF) i-micro-SD khadi slot - yememori khadi (ubuninzi. 32 GByte)
• I-Antenna ye-LTE yangaphakathi - i-adhesive, surface mountable

IMIQATHANGO YAngoku & YOKUSETYENZISWA / YOKUSEBENZA

• Igalelo lamandla: ~ 100-240V AC, + 10% / -10%, 50-60Hz +/- 5%
• Ukusetyenziswa: Ubuncinci: 3W / Umyinge: 5W / Max: 9W (0.25A)
• Ukhetho lwemodyuli yeSelula:
  • I-LTE Cat.1: Telit LE910C1-EUX (LTE Cat.1: B1, B3, B7, B8, B20, B28A / 3G: B1, B3, B8 / 2G: B3, B8)
  • LTE Cat.M / Cat.NB: Telit ME910C1-E1 (LTE M1 & NB1 B3, B8, B20)
• Ukushisa okusebenzayo / ukugcina: phakathi -40'C kunye + 85'C, 0-95% rel. ukufuma
• Ubungakanani: 175 x 104 x 60 mm / Ubunzima: 420gr
• Indawo ebiyelweyo: IP52 ABS iplastiki enesigqubuthelo esicacileyo setheminali, inokuxhonywa kuloliwe / eludongeni

  

UMFANEKISO WE-SCHEMATIC WE-INTERFACES, PINOUT

ISILUMKO! MUSA UKUQHAGAMSHELANA ~ 100-240V UMTHOMBO WAMANDLA we-AC kwi-pigtail ISIHLANGANISI SE-AC (24) OKANYE I-INPUT YAMANDLA (12) KWISIXHOBO de awugqibanga ngocingo!
XA UVULA I-ENCLOSURE, HLALA UQINISEKISA UKUBA i-PCB AYIQHAGAMSHELWE NOMTHETHO WAMANDLA kwaye ii-supercapacitors ziphelile (IIMPAWU ZOKUSEBENZA AYISEBENZE) PHAMBI KOKUBAMBA I-PCB!

AMANYATHELO OKUFAKA

1. Susa iplastiki, isikhuseli sesigqubuthelo esingaphezulu esicacileyo (1) ngokukhulula isikrufu (3) ukusuka phezulu kwendawo ebiyelweyo.
2. Shelelisela phezulu inxalenye yeplastiki (1) ngononophelo kwicala elisezantsi lesiseko (2), uze ususe isiciko esiphezulu (1).
3. Ngoku unokukhulula ukudibanisa iingcingo kunye neentambo kumazibuko kunye nojongano. Vula ngononophelo iigwegwe zeplastiki (12) zesiseko esibiyelweyo (2) ngesikrudrayiva.
4. Ngoku isiseko seplastiki sinokubonwa kunye nePCB edibeneyo (4) ngaphakathi. Vula iPCB (4) kwaye uyisuse kwisiseko (2), emva koko ujike iPCB ijonge phantsi. Ngoku ungabona icala elisezantsi lePCB.
5. Faka i-SIM khadi encinci (eye yasebenza nge-APN) kwisibambi seSIM (23). Jonga umzobo kwiphepha elilandelayo: umgca osikiwe weSIM kufuneka ujongiswe kwiPCB kwaye itshiphu yeSIM ijonge phantsi. Faka kwaye utyhale iSIM ide ibe ibotshelelwe (uya kuva isandi sokucofa).
6. Ungasebenzisa i-micro-SD khadi ukuba uyafuna (ukhetho). Emva koko faka imemori khadi kwi-mini-SD khadi slot (22) kwaye utyhale de ibe iya kubotshelelwa ngokukhuselekileyo.
7. Ngoku jikela umva iPCB kwaye uyibuyisele kwisiseko sovalelo (2).
8. Jonga kwi-PCB ukuba intambo ye-eriyali ye-LTE (16) iqhagamshelwe kwi-Antenna RF isidibanisi (15).
9. Buyisela indawo engaphezulu yeplastiki ye-ABS emhlophe esuswayo kwisiseko (2) - khangela ukuba amagwegwe (12) ayavala.
10. Yenza i-wiring ngokweemfuno - ngokusekelwe kumfanekiso wesikimu (ngasentla).
11. Qhagamshela i-AC power chord (i-AC pigtailed connector) iingcingo (24) ukuya kwizikhonkwane ezimbini zokuqala (5) zesixhobo (ukusuka ekhohlo ukuya ekunene): zimnyama ukuya ku-N (neutric), zibomvu ukuya ku-L (umgca).
12. Xhuma iyunithi yokukhanyisa iingcingo zombane (25) zebhokisi yekhabhinethi yokukhanya kwesitalato - ukuya kwiziphumo ezifunekayo zokubuyisela (6).
    Qaphela ukuba i-RELAY 1..2 i-latching relays, evumela i-NO, i-NC, i-COM uxhumano kunye neendlela zokutshintsha, ngelixa i-RELAY 3..4 ine-NC kuphela, i-COM uxhumano kunye nemodi yokutshintsha.
13. Xhuma intambo ye-UTP ene-Y (27) - ye-Ethernet / RS485 / P1 - okanye intambo ye-UTP ngqo (26) - ye-Ethernet kuphela - kwi-port ye-RJ45 (7) - ngokweemfuno. Elinye icala lentambo ye-Ethernet kufuneka iqhagamshelwe kwiPC yakho okanye isixhobo sangaphandle ofuna ukusiqhagamshela.
    Qaphela, ukuba i-RS485 / P1 iingcingo zojongano ziziingcingo zokujingi ezizimeleyo (28).

    

14. Qhagamshela i-RS485 kwisixhobo sangaphandle. I-interface ye-P1 iyafumaneka ukudibanisa imitha yombane / imodem yokulinganisa i-smart.
15. Buyisela umva isigqubuthelo esingaphezulu seplastiki esikhanyayo (1) kwisiseko (2).
16. I-enclosure yesixhobo iqulethe iindidi ezimbini zokulungiswa, eziza kujoliswa ukukhwela kwisitimela okanye ukusebenzisa i-3-point fixation by screws, okanye ukusebenzisa i-hook (kwindawo yokuxhoma eludongeni / kwibhokisi yekhabhinethi yokukhanya kwesitrato).
17. Xhuma i-100-240V AC unikezelo lwamandla kwi-pigtail isidibanisi sentambo yamandla ye-AC (24) kunye nomthombo wamandla wangaphandle / iplagi yombane.
18. Isixhobo sinenkqubo efakwe ngaphambili. Ubume bangoku besixhobo buboniswa zizibane zayo ze-LED (11).
    • IZIKHATHI ze-LED – Jonga incwadana yokuFakelo ngolwazi oluthe kratya.
    • I-REL.1: I-Relay#1 (imowudi: HAYI, NC, COM) SET/SETSHA kwakhona iyafumaneka
    • I-REL.2: I-Relay#2 (imowudi: HAYI, NC, COM) SET/SETSHA kwakhona iyafumaneka
    • I-REL.3: Udluliselo#3 (imowudi: NC, COM) akukho PHINDA PIN, SET yaliwe
    • I-REL.4: Udluliselo#4 (imowudi: NC, COM) akukho PHINDA PIN, SET yaliwe
    • I-WAN LED: kuqhagamshelwano lwenethiwekhi (LAN/WAN umsebenzi)
      Qaphela, ukuba isixhobo sinecandelo le-supercapacitor ngaphakathi, elibonelela ngokuvalwa okukhuselekileyo kwimeko yombane outage. Kwimeko yamandla otage - ngenxa ye-supercapacitors - inamandla okwaneleyo ukubonelela ngokunqanyulwa okukhuselekileyo kunye nokuvala (ngaphambi kokuba i-supercapacitors iya kuphelelwa).
      I-supercapacitor inokudinwa emva kwe-outage okanye ukuba ugcina isixhobo iinyanga ngaphandle kombane wokudibanisa. Kufuneka ihlawulwe phambi kokusetyenziswa

      

UKUQALA ISIXHOBO

1. Xa amandla kwisixhobo, ukutshaja kwakhona kwe-supercapacitor kuya kuqaliswa ngokuzenzekelayo. Inkqubo yesixhobo iya kuqaliswa kuphela emva kokuphela kwenkqubo yokuhlawula.
2. Qhagamshela intambo ye-Ethernet (UTP) phakathi kwesixhobo sojongano lwe-RJ45 okanye iadaptha yentambo emile okwe-Y kunye ne-Ethernet port yePC yakho. (Isixhobo se-RS485 kufuneka siqhagamshelwe kwelinye izibuko lentambo engu-Y.)
3. Qwalasela ujongano lweEthernet kwiPC yakho yeTCP/IPv4 iprothokholi yokuseta idilesi yeIP: 192.168.127.100 kunye ne subnet mask: 255.255.255.0
4. Qala isixhobo ngokongeza amandla e-AC kwigalelo lamandla (5).
5. Zonke ii-LED ezine ziya kuba zingenanto kwimizuzwana embalwa - eqhelekileyo. (Ukuba ifowuni yayingasetyenziswanga ixesha elide, i-supercapacitors kufuneka ihlawulwe ngaphambi kokuba i-microcontroller iqalise isixhobo.)
6. Emva kwemizuzwana embalwa kuphela i-WAN LED iya kukhanya ngokuqhubekayo ngobomvu de i-supercapacitors iya kuhlawuliswa (isixhobo asikaqaliswa). Ingathatha malunga nemizuzu eyi-1-4.
7. Xa intlawulo igqityiwe, isixhobo siya kuqaliswa. Iza kusayinwa ngokukhanyisa okubomvu kwazo zonke ii-LED ze-relay (REL.1..4) imizuzwana ye-3 kunye ne-WAN LED ekhanyiswa ngokuluhlaza ngokukhawuleza. Oku kuthetha ukuba isixhobo siqalisiwe.
8. Kungekudala, xa i-WAN LED iya kuba ingenanto kwaye zonke ii-LED ze-relay (REL.1..4) ziya kukhanya ngokuqhubekayo ngokubomvu *, oko kuthetha ukuba isixhobo siqala ngoku. Kuthatha malunga nemizuzu eyi-1-2.*Khumbula, ukuba sele uqhagamshele i-relay, oko kuya kusayina imeko yangoku ye-relay ngesimo sayo esifanelekileyo (ubomvu buthetha UKUVALWA, indlela eluhlaza ivuliwe).
9. Ekupheleni kwenkqubo yokuqalisa isixhobo sinokufikelelwa kujongano lwenethiwekhi (LAN kunye neWAN) ukuba sele ziqwalaselwe. Ukuba ujongano lwenethiwekhi yangoku lukhona, lusayinwe ngumqondiso we-WAN LED.
10. Xa isixhobo sifikeleleka kwi-interface ye-LAN emiselweyo, i-WAN LED iya kukhanya ngokuqhubekayo ngokuluhlaza. (Ukuba idanyaza ngokukhawuleza, isayina umsebenzi wothungelwano kujongano.)
    • Xa ujongano lwe-WAN sele lucwangcisiwe, kwaye i-APN iqhagamshelwe, i-WAN LED iya kukhanya ngobomvu. (Ukuba idanyaza ngokukhawuleza, isayina umsebenzi wothungelwano.)
    • Ukuba i-LAN kunye ne-WAN ziyafikeleleka, i-WAN LED iya kusebenza nge-bi-color (obomvu KUNYE nohlaza ngaxeshanye), ngokucacileyo ngomthubi. Iimpawu ezidanyazayo umsebenzi womnatha.

UKUQWALASELWA KWESIXHOBO

1. Vula isixhobo sasekhaya webindawo kwiMozilla Firefox isikhangeli, apho ukungagqibeki web idilesi yomsebenzisi (LuCi) kwizibuko le-Ethernet yile: https://192.168.127.1:8888
2. Ngena ngeGama lomsebenzisi: ingcambu , Igama lokugqitha: wmrpwd kwaye tyhala kwiNgena iqhosha.
3. Qwalasela iisetingi ze-APN zekhadi leSIM: vula iNethiwekhi / i-Interfaces menu, i-WAN interface, Hlela iqhosha.
4. Gcwalisa iSIM #1 APN (IPN useto lweSIM khadi yakho). Ukuba unekhowudi ye-PIN kwiSIM khadi oyisebenzisayo, yongeza i-PIN echanekileyo apha. (Buza i-Mobile Operator yakho.)
5. Cofa kwi Gcina & Faka iqhosha ukugcina useto kwaye uqwalasele imodyuli yeselula. Kungekudala (~ 10-60 imizuzwana) imodyuli yeselula iya kuqwalaselwa malunga noseto olutsha.
6. Emva koko isixhobo siya kuzama ukudibanisa kunye nokubhalisa iSIM kwinethiwekhi. Ukufumaneka kwenethiwekhi yeselula kuya kusayinwa yi-WAN LED (ukukhanya / ukudanyaza ngokuluhlaza - kunye ne-Ethernet LED, i-apperently yellow (umsebenzi obomvu + oluhlaza we-LED ngaxeshanye) Xa imodyuli ibhaliswe ngempumelelo kwi-APN, iya kuba nedatha yedatha kwi-interface ye-WAN - khangela kumaxabiso e-Rx/Tx Ungajonga i-Status / Overview menu, Umsebenzi womnatha inxalenye yeenkcukacha ezininzi.
7. Ukumisela useto lwe-RS485, funda Incwadi yoMsebenzisi.

AMAXWEBHU & NENKXASO

Amaxwebhu anokufumaneka kwimveliso webindawo: https://m2mserver.com/en/product/wme-lcb/
Kwimeko yesicelo senkxaso yemveliso, cela inkxaso yethu kwi iotsupport@wmsystems.hu idilesi ye-imeyile okanye khangela inkxaso yethu webindawo yokufumana amanye amathuba oqhagamshelwano nceda: https://www.m2mserver.com/en/support/

Le mveliso iphawulwe ngesimboli se-CE ngokwemigaqo yaseYurophu.
Isimboli somgqomo ohlatyiweyo sithetha ukuba imveliso ekupheleni komjikelo wobomi bayo kufuneka ilahlwe nenkunkuma yasekhaya ngokubanzi kwiManyano yaseYurophu. Lahla kuphela izinto zombane/ze-elektroniki kwiinkqubo zokuqokelela ezahlukileyo, ezilungiselela ukufunyanwa nokuhlaziywa kwezinto eziqulethwe ngaphakathi. Oku akubhekiseli kuphela kwimveliso, kodwa nazo zonke ezinye izixhobo eziphawulwe ngesimboli esifanayo.

Amaxwebhu / Izibonelelo

IINKQUBO ze-WM ze-WM-E LCB IoT yokuLawula ukuLawulwa koLawulo [pdf] Isikhokelo soFakelo I-WM-E LCB IoT yokuLawula ukuLawulwa koMlayisho, iWM-E LCB, i-IoT yokuLawula uLawulo loLawulo, uTshintsho loLawulo loMlayisho, Tshintshela ngokuLawula

Iimbekiselo

• Incwadi yokusebenzisa