ọdịnaya zoo
1 Sistemụ WM WM-E LCB IoT Ngbanwe njikwa ibu
2 OZI
3 Ọnọdụ ugbu a & oriri / eji arụ ọrụ
4 Ọdịiche dị n'ichepụta ihu, PINOUT
5 Nzọụkwụ ntinye
6 Ịmalite ngwaọrụ
7 Ịhazi ngwaọrụ
8 Akwụkwọ & Nkwado
9 Akwụkwọ / akụrụngwa
9.1 Ntụaka
10 Ozi ndị metụtara

WM Sistemụ-LoGO

Sistemụ WM WM-E LCB IoT Ngbanwe njikwa ibu

Sistemụ WM WM-E LCB IoT Ngbanwe Njikwa Ibu Ibu-FIG1

OZI

  • Ọkụ ọkụ - ntinye ike AC, ngọngọ njedebe 2-pin
  • Ntugharị 1..2 - relay latching, 16A 250V AC, ụdị mgbanwe: NO, NC, COM, ngọngọ nkwụsị
  • Ntugharị 3..4 - relay latching, 16A 250V AC, ọnọdụ mgbanwe: NC, COM, ngọngọ nkwụsị
  • Njirimara njikọ RJ45:
    • Ethernet - 10/100MBit, ọdụ ụgbọ mmiri RJ45, site na eriri UTP Cat5
    • RS485 - maka ngwaọrụ mpụga site na eriri Y-ụdị
    • P1 interface – maka smart mita site na eriri ụdị Y
  • LED1..LED4/WAN – Ọnọdụ LEDs
  • SIM - Tinye oghere kaadị SIM (obere SIM, ụdị 2FF) oghere kaadị micro-SD - maka kaadị ebe nchekwa (max. 32 GByte)
  • Antenna LTE ime – nrapado, elu elu

Ọnọdụ ugbu a & oriri / eji arụ ọrụ

  • Ntinye ike: ~ 100-240V AC, + 10% / -10%, 50-60Hz +/- 5%
  • Oriri: Opekempe: 3W / Nkezi: 5W / Max: 9W (0.25A)
  • Nhọrọ modul cellular:
    • LTE Cat.1: Telit LE910C1-EUX (LTE Cat.1: B1, B3, B7, B8, B20, B28A / 3G: B1, B3, B8 / 2G: B3, B8)
    • LTE Cat.M/ Cat.NB: Telit ME910C1-E1 (LTE M1 & NB1 B3, B8, B20)
  • Ọnọdụ ọrụ / nchekwa: n'etiti -40'C na + 85'C, 0-95% rel. iru mmiri
  • Nha: 175 x 104 x 60 mm / arọ: 420gr
  • Ihe mkpuchi: IP52 ABS plastik nwere mkpuchi ọnụ ụzọ, enwere ike itinye ya na ụgbọ okporo ígwè / na mgbidi

    Sistemụ WM WM-E LCB IoT Ngbanwe Njikwa Ibu Ibu-FIG2

Ọdịiche dị n'ichepụta ihu, PINOUT

Sistemụ WM WM-E LCB IoT Ngbanwe Njikwa Ibu Ibu-FIG3

Kpachara anya! Ejikọtala ~ 100-240V AC POWER SOURCE na pigtail AC CONNECTOR (24) ma ọ bụ ntinye ike (12) nke ngwaọrụ ahụ ruo mgbe ị mechaghị wiring!
MGBE emeghere ogige ahụ, na-agba mbọ hụ na PCB adịghị ejikọta ya na isi iyi ike na ike gwụrụ (LED Signals are inACTIVE) tupu emetụ PCB ahụ aka!

Nzọụkwụ ntinye

  1. Wepu plastic, transperent n'ọdụ ụgbọ mmiri mkpuchi mkpuchi (1) site na ịtọhapụ kposara (3) si n'elu nke ogige.
  2. Wepụ akụkụ plastik (1) nke ọma n'akụkụ ala nke isi (2), wee wepụ mkpuchi elu (1).
  3. Ugbu a ị nwere ike nweere onwe gị ijikọ wires na eriri na ọdụ ụgbọ mmiri na oghere. Jiri nlezianya meghee nko rọba (12) nke ihe mkpuchi ntọala (2) site na screwdriver.
  4. Ugbu a, enwere ike ịhụ ntọala plastik na PCB (4) gbakọtara n'ime. Mepee PCB (4) wee wepụ ya na ntọala (2), wee tụgharịa PCB ihu. Ugbu a ị nwere ike ịhụ akụkụ ala nke PCB.
  5. Fanye obere SIM kaadị (a na-eji APN rụọ ọrụ) n'ime ihe njide SIM (23). Lelee ọnụ ọgụgụ dị na ibe na-esote: akụkụ SIM e gbuturu ga-adabere na PCB ma mgbawa SIM ahụ na-eleda ala. Tinye ma gbanye SIM ruo mgbe a ga-ekekọta ya (ị ga-anụ ụda pịa).
  6. Ị nwere ike iji kaadị micro-SD ma ọ bụrụ na ịchọrọ (nhọrọ). Wee tinye kaadị ebe nchekwa n'ime oghere kaadị mini-SD (22) wee gbanye ruo mgbe a ga-ejikọta ya na nchekwa.
  7. Ugbu a tụgharịa PCB ma tinye azụ n'ime ebe nchekwa (2).
  8. Lelee na PCB na eriri antenna LTE (16) jikọọ na njikọ Antenna RF (15).
  9. Tinyeghachi akụkụ elu rọba ABS ọcha nke mbughari na ntọala (2) - lelee na nko (12) na-emechi.
  10. Mee wiring dị ka mkpa - dabere na atụmatụ atụmatụ (n'elu).
  11. Jikọọ eriri ọkụ AC (AC pigtailed connector) wires (24) na ntụtụ abụọ mbụ (5) nke ngwaọrụ (site n'aka ekpe gaa n'aka nri): ojii ruo N (neutric), uhie gaa na L (akara).
  12. Jikọọ wires relay unit ọkụ (25) nke igbe kabinet ọkụ okporo ụzọ - na ntinye ọsọ ọsọ achọrọ (6).
    Rịba ama na RELAY 1..2 na-agbanye relays, nke na-enye ohere njikọ NO, NC, COM na mgbanwe mgbanwe, ebe RELAY 3..4 nwere naanị NC, njikọ COM na mgbanwe mgbanwe.
  13. Jikọọ eriri UTP nke yiri Y (27) - maka Ethernet / RS485 / P1 - ma ọ bụ eriri UTP kpọmkwem (26) - maka naanị Ethernet - na ọdụ ụgbọ mmiri RJ45 (7) - dịka mkpa. Ekwesịrị ijikọ akụkụ nke ọzọ nke eriri Ethernet na PC gị ma ọ bụ ngwaọrụ mpụga ịchọrọ ijikọ.
    Mara, na wires interface RS485/P1 bụ wires swing aka kwụ ọtọ (28).

    Sistemụ WM WM-E LCB IoT Ngbanwe Njikwa Ibu Ibu-FIG4

  14. Jikọọ RS485 na ngwaọrụ mpụga. Ihe interface P1 dị maka ijikọ igwe eletrik / smart metering modem.
  15. Tinyeghachi ihe mkpuchi elu plastik transperent transperent (1) na ntọala (2).
  16. Ihe mkpuchi ngwaọrụ ahụ nwere ụdị ndozi abụọ, nke a ga-ebu n'obi na-agbago n'ọdụ ụgbọ okporo ígwè ma ọ bụ na-eji 3-point fixation site na kposara, ma ọ bụ iji nko (n'ọnọdụ kwụgidere na mgbidi / n'ime igbe ọkụ ọkụ n'okporo ámá).
  17. Tinye ọkụ eletrik 100-240V AC na njikọ pigtail nke eriri ike AC (24) yana na plọg ọkụ mpụga / ọkụ eletrik.
  18. Ngwaọrụ ahụ nwere sistemụ arụnyere mbụ. Egosiputa ọnọdụ ngwaọrụ ugbu a site na ọkụ ọkụ ya (11).
    • Ọkụ ọkụ LED – Lelee ntuziaka nwụnye maka ozi ndị ọzọ.
    • REL.1: Relay#1 (ụkpụrụ: NO, NC, COM) tọgharịa/Tọgharịa dị
    • REL.2: Relay#2 (ụkpụrụ: NO, NC, COM) tọgharịa/Tọgharịa dị
    • REL.3: Ntugharị # 3 (ụkpụrụ: NC, COM) enweghị ntụtụ nrụpụta, SET kwụsịrị
    • REL.4: Ntugharị # 4 (ụkpụrụ: NC, COM) enweghị ntụtụ nrụpụta, SET kwụsịrị
    • WAN LED: maka njikọ netwọk (ọrụ LAN/WAN)
      Rịba ama, na ngwaọrụ ahụ nwere akụrụngwa supercapacitor n'ime, nke na-enye nkwụsị nke ọma ma ọ bụrụ na ị nwere iketage. Ọ bụrụ na ike gịtage - n'ihi supercapacitors - nwere ike zuru oke iji nye nkwụsịtụ na nkwụsị nke ọma (tupu ndị isi ike ga-agwụ ike).
      Supercapacitor nwere ike ịgwụ ike mgbe emechara outage ma ọ bụ ọ bụrụ na ị na-echekwa ngwaọrụ ahụ ruo ọnwa na-enweghị ike jikọọ. A ga-eburịrị ya tupu ejiri ya

      Sistemụ WM WM-E LCB IoT Ngbanwe Njikwa Ibu Ibu-FIG5

Ịmalite ngwaọrụ

  1. Mgbe ị na-agbanye ngwaọrụ ahụ, ịchaji nke supercapacitor ga-amalite na-akpaghị aka. A ga-amalite usoro ngwaọrụ ahụ naanị mgbe njedebe nke usoro ụgwọ ahụ gasịrị.
  2. Jikọọ eriri Ethernet (UTP) n'etiti interface RJ45 nke ngwaọrụ ma ọ bụ ihe nkwụnye USB nke yiri Y yana ọdụ ụgbọ mmiri Ethernet PC gị. (Ekwesịrị ijikọ ngwaọrụ RS485 na ọdụ ụgbọ mmiri ọzọ nke ụdị Y.)
  3. Hazie interface Ethernet dị na PC gị maka usoro TCP/IPv4 maka ịtọ adreesị IP: 192.168.127.100 na nkpuchi subnet: 255.255.255.0
  4. Malite ngwaọrụ site na ịgbakwụnye ike AC na ntinye ike (5).
  5. Igwe ọkụ anọ ahụ niile ga-adị oghere maka sekọnd ole na ole - ya nkịtị. (Ọ bụrụ na ejighị ngwaọrụ ahụ kemgbe ogologo oge, a ga-anarịrị ndị supercapaccitors tupu microcontroller enwee ike ịmalite ngwaọrụ ahụ.)
  6. Mgbe sekọnd ole na ole gachara naanị WAN LED ga-eji na-acha uhie uhie na-enwu n'ihu ruo mgbe a ga-ebubo supercapaccitors (ngwaọrụ ahụ amalitebeghị). Ọ nwere ike were ihe dịka 1-4 nkeji.
  7. Mgbe agbachara ụgwọ ahụ, ngwaọrụ ga-amalite. A ga-edebanye aha ya site na ọkụ na-acha uhie uhie nke ọkụ ọkụ ọkụ niile (REL.1..4) maka 3 sekọnd yana site na WAN LED nke na-enwu site na akwụkwọ ndụ akwụkwọ ndụ n'oge na-adịghị anya. Nke a pụtara na amalitela ngwaọrụ ahụ.
  8. N'oge na-adịghị anya, mgbe WAN LED ga-adị oghere na LED relay (REL.1..4) ga-anọgide na-enwu site na-acha uhie uhie *, nke ahụ pụtara na ngwaọrụ ahụ na-agbapụ ugbu a. Ọ na-ewe ihe dị ka nkeji 1-2. * Cheta, ọ bụrụ na i jikọọlarị relay, nke ahụ ga-abanye na ọnọdụ nke relay ugbu a site na ọnọdụ ziri ezi (red pụtara gbanyụọ, akwụkwọ ndụ akwụkwọ ndụ pụtara gbanye).
  9. Na njedebe nke usoro buut, ngwaọrụ nwere ike iru na netwọk netwọk ya (LAN na WAN) ma ọ bụrụ na ahazilarị ha. Ọ bụrụ na interface netwọk ugbu a dị, akara ngosi WAN LED bịanyere aka na ya.
  10. Mgbe enwere ike ịnweta ngwaọrụ ahụ na interface LAN ahaziri, WAN LED ga na-enwu ọkụ na-aga n'ihu site na akwụkwọ ndụ akwụkwọ ndụ. (Ọ bụrụ na ọ na-enwu ngwa ngwa, ọ na-egosi ọrụ netwọk na interface ahụ.)
    • Mgbe ahazilarị interface WAN, yana njikọ APN, WAN LED ga-eji uhie na-enwu. (Ọ bụrụ na ọ na-enwu ngwa ngwa, ọ na-egosi ọrụ netwọk.)
    • Ọ bụrụ na LAN na WAN nwere ike ịnweta, WAN LED ga-arụ ọrụ site na agba agba (acha uhie uhie na akwụkwọ ndụ akwụkwọ ndụ n'otu oge), o doro anya na ọ bụ odo. Ọrụ netwọk na-egbuke egbuke.

Ịhazi ngwaọrụ

  1. Mepee mpaghara ngwaọrụ ahụ websaịtị na Mozilla Firefox nchọgharị, ebe ndabara web adreesị onye ọrụ (LuCi) na ọdụ ụgbọ mmiri Ethernet bụ: https://192.168.127.1:8888
  2. Jiri aha njirimara banye: mgbọrọgwụ , Paswọdu: wmrpwd wee pịa bọtịnụ nbanye.
  3. Hazie ntọala APN kaadị SIM: mepee menu netwọkụ / interface, WAN interface, bọtịnụ dezie.
  4. Jupụta SIM #1 APN (Ntọala APN nke kaadị SIM gị). Ọ bụrụ na ịnwe koodu PIN na kaadị SIM nke ị na-eji, tinye PIN ziri ezi ebe a. (Jụọ onye ọrụ mkpanaka gị.)
  5. Pịa bọtịnụ Chekwa & Tinye ka ịchekwaa ntọala na ịhazi modul cellular. N'oge na-adịghị (~ 10-60 sekọnd) a ga-ahazi modul cellular gbasara ntọala ọhụrụ.
  6. Mgbe ahụ ngwaọrụ ga-agbalị jikọọ na debanye aha SIM na netwọk. WAN LED ga-abịanye aka na nnweta nke netwọkụ mkpanaka (na-enwu / na-egbuke egbuke site na akwụkwọ ndụ akwụkwọ ndụ - yana Ethernet LED, na-acha odo odo na-acha uhie uhie + n'otu oge ahụ). ọ ga-enwe okporo ụzọ data na interface WAN - lelee na ụkpụrụ Rx/Tx Ị nwere ike ịlele Ọnọdụ / karịrịview menu, akụkụ netwọk maka nkọwa ndị ọzọ.
  7. Iji hazie ntọala RS485, gụọ akwụkwọ ntuziaka onye ọrụ.

Akwụkwọ & Nkwado

Enwere ike ịchọta akwụkwọ na ngwaahịa ahụ websaịtị: https://m2mserver.com/en/product/wme-lcb/
N'ihe gbasara arịrịọ nkwado ngwaahịa, jụọ nkwado anyị na ebe a iotsupport@wmsystems.hu adreesị ozi-e ma ọ bụ lelee nkwado anyị websaịtị maka ohere kọntaktị ọzọ biko: https://www.m2mserver.com/en/support/

Akara ngwaahịa a na akara CE dịka ụkpụrụ European siri dị.
Akara igwe kwụpụrụ agbapụ pụtara na a ga-ekpochapụ ngwaahịa a na njedebe nke usoro ndụ ya na mkpofu ụlọ n'ime European Union. Naanị tụfuo ihe eletrik / eletrọnịkị na atụmatụ nnakọta dị iche iche, nke na-eme ka mgbake na ịmegharị ihe ndị dị n'ime ya. Nke a na-ezo aka ọ bụghị naanị na ngwaahịa, kamakwa ngwa ndị ọzọ niile nwere otu akara.

Akwụkwọ / akụrụngwa

Sistemụ WM WM-E LCB IoT Ngbanwe njikwa ibu [pdf] Ntuziaka nwụnye
WM-E LCB IoT ngbanwe njikwa ibu, WM-E LCB, IoT Load Control Switch, Load Control Switch, Control Switch, Switch

Ntụaka

Ozi ndị metụtara

Hapụ ikwu

Agaghị ebipụta adreesị ozi-e gị. Akara mpaghara achọrọ akara *