WM SYSTEMS WM-E2SL Modem User Guide

WM SYSTEMS WM-E2SL 
Modem User Guide

Kev sib txuas

- Plastic enclosure thiab nws lub hau saum toj kawg nkaus

- PCB (mainboard)
- Cov ntsiab lus fastener (fixation lags)

- FME kav hlau txais xov txuas (50 Ohm) - xaiv tau: SMA kav hlau txais xov txuas
- RJ45 connector (cov ntaub ntawv txuas thiab DC fais fab mov)

- Cov ntaub ntawv txuas cable interface
- Cov xwm txheej LEDs: ntawm sab laug mus rau sab xis: LED2 (liab), LED1 (xiav), LED3 (ntsuab)

- Mini SIM-card tuav (rub nws mus rau sab laug thiab qhib)
- PCB fastener screws

- Super-capacitors
- Sab hauv kav hlau txais xov txuas (U.FL - FME)

KEV PAB CUAM THIAB Environmental condition

Lub hwj chim: 8-12V DC (10V DC nominal)

Tam sim no: 200mA, Kev siv: 2W @ 10VDC
Lub hwj chim tawm tswv yim: tuaj yeem muab los ntawm DC lub zog los ntawm qhov ntsuas los ntawm RJ45 chaw nres nkoj

Kev sib txuas lus wireless: raws li xaiv module (kev txiav txim xaiv)
Chaw nres nkoj: RJ45 txuas: RS232 (300/1200/2400/4800/9600 baud)

Ua haujlwm kub: -30 ° C * 60 ° C, rel. 0-95% yog ' Cov av noo (* TLS: los ntawm 25 ° C) / Cia kub: los ntawm -30 ° C txog +85 ° C, rel. 0-95% yog ' av noo
* Thaum siv TLS: los ntawm -25 ° C

MECHANICAL DATA / DESIGN

Qhov ntev: 86 x 85 x 30mm, Qhov hnyav: 106 g,
Hnav khaub ncaws: Lub modem muaj qhov tsis zoo, IP21 tiv thaiv yas vaj tse.
Lub kaw lus tuaj yeem txuas tau los ntawm kev kho pob ntseg hauv qab 'meter' lub davhlau ya nyob twg npog.

INSTALLATION SIAB

Kauj Ruam 1: Tshem lub meter davhlau ya nyob twg los ntawm nws cov ntsia hlau (nrog rau lub hau ntswj).
Kauj ruam #2: Xyuas kom meej tias lub modem tsis nyob rau hauv lub hwj chim mov, tshem tawm RJ45 kev twb kev txuas los ntawm lub 'meter'. (Lub zog yuav raug tshem tawm.)

Kauj Ruam #3: thawb lub pob ntseg (3) thiab qhib lub qhov rooj sab saum toj (1) ntawm lub kav hlau txais xov txuas. PCB yuav kov tau dawb.
Kauj Ruam #4: Thawb cov yas SIM lub hau npog (8) ntawm sab xis mus rau sab laug, thiab qhib nws.

Kauj ruam #5: Ntxig ib tug active SIM card rau hauv lub tuav (8). Ua tib zoo mus rau txoj haujlwm raug
(lub nti ntsia mus, daim npav txiav ntug zoo li sab nraud ntawm tus kav hlau txais xov, thawb lub SIM mus rau hauv txoj kev taw qhia, kaw tus tuav SIM, thiab thawb rov qab SIM tuav (8) ntawm sab laug mus rau sab xis, thiab kaw rov qab.
Kauj ruam #6: Xyuas kom meej tias lub kav hlau txais xov sab hauv dub cable txuas rau U.FL connector (11)!
Kauj ruam #7: Xyuas seb cov ntaub ntawv sab hauv cable (5) txuas nrog PCB (2), mus rau cov ntaub ntawv txuas interface (6).
Kauj Ruam #8: Mount lub kav hlau txais xov rau FME kav hlau txais xov txuas (5). (Yog tias koj siv SMA kav hlau txais xov, ces siv SMA-FME converter).
Kauj ruam #9: Txuas lub modem mus rau lub computer los ntawm RJ45 cable thiab RJ45-USB converter, thiab teem lub jumper txoj hauj lwm rau hauv RS232 hom. (lub modem tuaj yeem teeb tsa tsuas yog hauv
RS232 hom los ntawm cable!)
Kauj ruam #10: Kho lub modem los ntawm WM-E Term® software.
Kauj Ruam #11: Tom qab kev teeb tsa tshem tawm RJ45-USB adapter los ntawm lub cable thiab lub modem lub zog yuav tsum tau tso tseg.
Kauj ruam #12: Kaw rov qab lub modem enclosure cover (1) los ntawm nws fastener pob ntseg (3) mus rau lub 'meter' enclosure. Koj yuav hnov lub suab nias thaum kaw.
Kauj Ruam #13: Muab thiab nruab lub modem rau lub ntsuas qhov ntsuas qhov ntsuas / kho cov ntsiab lus thiab txuas lub modem rau hauv lub 'meter' lub tsev / enclosure.
Kauj ruam #14: Lub modem-Landis + Gyr® meter kev twb kev txuas tuaj yeem pib ntawm RS232 chaw nres nkoj los ntawm 1: 1 cable txuas. Yog li siv beige RJ45 cable (5) ntawm lub modem los txuas mus rau RJ45 chaw nres nkoj ntawm lub 'meter'.
Kauj Ruam #15: Lub modem yuav siv lub ntsuas hluav taws xob tam sim ntawd thiab nws txoj haujlwm yuav pib. Cov cuab yeej ua haujlwm tuaj yeem kuaj xyuas nrog LEDs.

Kev khiav hauj lwm LED SIGNALS - Thaum CHARGING

Nco ntsoov! Lub modem yuav tsum tau them ua ntej siv thawj zaug - lossis yog tias nws tsis tau siv lub sijhawm ntev. Tus nqi yuav siv li ntawm ~ 2 feeb yog tias lub supercapacitor tau tag / tso tawm.

Nyob rau hauv lub Hoobkas defaults, kev khiav hauj lwm thiab cov kab ke ntawm cov teeb liab LED tuaj yeem hloov tau los ntawm cov WM-E Term® configuration tool, ntawm General Meter settings pawg parameter. Qhov pub dawb xaiv cov kev xaiv LED ntxiv tuaj yeem pom hauv WM-E2SL ® modem's Installation Manual.

Tseem ceeb! Nco ntsoov, thaum lub sij hawm firmware uploading cov LEDs ua hauj lwm raws li nws yog ib txwm - tsis muaj qhov tseem ceeb LED teeb liab rau FW refresh kev kawm. Tom qab kev teeb tsa Firmware, 3 LEDS yuav teeb pom kev zoo rau 5 vib nas this thiab txhua yam yuav dawb paug, ces lub modem rov pib dua los ntawm cov firmware tshiab. Tom qab ntawd tag nrho cov teeb liab LED yuav raug siv raws li nws tau teev saum toj no.

CONFIGURATION THIAB MODEM

Lub modem yuav tsum tau configured los ntawm lub WM-E Term® software los ntawm kev teeb tsa nws cov kev txwv uas yuav tsum tau ua ua ntej kev ua haujlwm thiab kev siv:

Thaum lub sij hawm configuration txheej txheem, RJ45 (5) connector yuav tsum tau muab tshem tawm ntawm lub meter connector thiab yuav tsum tau txuas nrog lub PC. Thaum lub sijhawm sib txuas ntawm PC, cov ntaub ntawv ntsuas tsis tuaj yeem tau txais los ntawm modem.
Txuas lub modem rau lub computer los ntawm RJ45 cable thiab RJ45-USB converter. Cov jumpers yuav tsum nyob hauv RS232 txoj haujlwm!
Tseem ceeb! Thaum lub sij hawm configuration, lub hwj chim mov ntawm lub modem yog assured los ntawm no converter board, ntawm USB kev twb kev txuas.
Qee lub khoos phis tawj tuaj yeem nkag siab rau USB tam sim no hloov pauv. Nyob rau hauv rooj plaub no koj yuav tsum siv lub hwj chim sab nraud nrog kev sib txuas tshwj xeeb.
Tom qab kev teeb tsa rov qab txuas RJ45 cable rau lub 'meter'!

Rau qhov kev sib txuas serial cable teeb tsa COM chaw nres nkoj ntawm lub khoos phis tawj txuas nrog raws li modem serial chaw nres nkoj hauv Windows ntawm a Pib ntawv qhia zaub mov / Tswj vaj huam sib luag / Tus Thawj Tswj Ntaus / Chaw nres nkoj (COM thiab LTP) ntawm Properties: ntsis / sec: 9600, Cov ntaub ntawv: 8, Parity:
Tsis muaj, Stopbits: 1, Bandwith tswj: Tsis yog
Kev teeb tsa tuaj yeem ua tiav ntawm CSData hu lossis TCP kev sib txuas yog tias APN twb tau teeb tsa lawm.

MODEM CONFIGURATION los ntawm WM-E TERM®

Microsoft .NET moj khaum runtime ib puag ncig yog xav tau ntawm koj lub computer. Rau kev teeb tsa modem thiab kuaj koj yuav xav tau APN / cov ntaub ntawv pob qhib, ib daim npav SIM. Kev teeb tsa tuaj yeem ua tau yam tsis muaj SIM daim npav, tab sis qhov no lub modem ua haujlwm rov pib dua ib ntus, thiab qee qhov modem nta yuav tsis muaj kom txog thaum SIM daim npav tso (xws li kev nkag mus rau tej thaj chaw deb).

Kev sib txuas rau modem (ntawm RS232 chaw nres nkoj *)

Kauj ruam #1: Download tau lub https://www.m2mserver.com/m2m-downloads/WM-ETerm_v1_3_63.zip file. Nkaub thiab pib tus wm-term.exe file.
Kauj ruam #2: Push lub Nkag mus khawm thiab xaiv qhov WM-E2S device los ntawm nws Xaiv khawm.
Kauj ruam #3: Nyob rau sab laug ntawm qhov screen, ntawm qhov Hom kev sib txuas tab, xaiv lub Serial tab, thiab sau lub Kev sib txuas tshiab teb (new connection profile npe) thiab nias lub khawm Tsim khawm.

Kauj Ruam 4: Xaiv qhov tsim nyog COM chaw nres nkoj thiab configure lub Cov ntaub ntawv kis tau tus mob ceev rau 9600 baud (hauv Windows® koj yuav tsum teeb tsa tib lub nrawm). Cov Cov ntaub ntawv hom tus nqi yuav tsum yog 8, N, 1. Ces thawb lub Txuag khawm los tsim serial kev twb kev txuas profile.
Kauj ruam #5: Hauv qab sab laug ntawm lub vijtsam xaiv qhov kev sib txuas hom (serial).
Kauj ruam #6: Xaiv lub Cov ntaub ntawv ntaus ntawv icon los ntawm cov ntawv qhia zaub mov thiab kos lub RSSI tus nqi, tias lub teeb liab muaj zog txaus thiab lub kav hlau txais xov txoj hauj lwm yog los yog tsis. (Qhov taw qhia yuav tsum muaj tsawg kawg yog daj (qhov nruab nrab lub teeb liab) lossis ntsuab (zoo teeb liab zoo). Yog tias koj muaj qhov tsis muaj zog, hloov txoj haujlwm kav hlau txais xov thaum koj yuav tsis tau txais tus nqi zoo dua dBm.

Kauj ruam #7: Xaiv lub Parameter nyeem ntawv icon rau kev sib txuas modem. Lub modem yuav txuas nrog thiab nws cov nqi parameter, cov cim yuav raug nyeem tawm.

* Yog tias koj siv cov ntaub ntawv hu (CSD) lossis TCP / IP kev sib txuas nyob deb ntawm kev sib txuas ntawm modem - xyuas phau ntawv qhia kev teeb tsa rau qhov tsis sib txuas!

Parameter configuration

Kauj Ruam 1: Download tau a WM-E Term sampua configuration file. Xaiv qhov File / Thauj khoom ntawv qhia zaub mov rau load file:
https://m2mserver.com/m2m-downloads/WM-E2SL-STD-DEFAULT-CONFIG.zip
Kauj Ruam 2: Hauv Parameter pawg xaiv cov APN pab pawg, ces thawb mus rau lub Kho cov nqi khawm. Txhais cov APN server thiab nyob rau hauv cov ntaub ntawv ntawm necassary lub APN Username thiab APN tus password teb, thiab thawb mus rau qhov OK khawm.
Kauj ruam #3: Xaiv lub M2M pawg parameter, ces thawb mus rau qhov Kho cov nqi khawm. Muab cov PORT naj npawb mus rau Transparent (IEC) 'meter' nyeem ntawv chaw nres nkoj teb - uas yuav siv tau rau cov chaw taws teeb meter readout. Muab lub configuration PORT NUMBER mus rau Configuration thiab firmware download chaw nres nkoj.

Kauj ruam #4: Yog hais tias tus SIM siv ib tug SIM PIN, ces koj yuav tsum tau txhais nws rau lub Mobile network pawg parameter, thiab muab rau hauv SIM PIN teb. Xaiv ib Mobile network technology (eg Tag nrho cov cuab yeej siv network muaj - uas yog pom zoo kom xaiv) los yog xaiv lub LTE rau 2G (rau "rov qab").
Koj tuaj yeem xaiv tus neeg teb xov tooj ntawm tes thiab network- ua tsis siv neeg lossis phau ntawv. Tom qab ntawd thawb mus rau qhov OK khawm.
Kauj ruam #5: Lub RS232 serial chaw nres nkoj thiab pob tshab chaw tuaj yeem pom nyob rau hauv Trans. / NTA pawg parameter. Cov kev teeb tsa ua ntej yog cov hauv qab no: ntawm Ntau hom kev siv hluav taws xob: transzparent hom, Meter chaw nres nkoj baud tus nqi: 9600, Cov ntaub ntawv hom: Tsau 8N1). Tom qab ntawd thawb mus rau qhov OK khawm.
Kauj ruam #6: Hauv RS485 meter interface pawg parameter, koj yuav tsum lov tes taw RS485 hom. Tom qab ntawd thawb mus rau qhov OK khawm.

Kauj ruam #7: Tom qab qhov chaw koj yuav tsum xaiv lub Parameter sau icon xa cov chaw mus rau modem. Koj tuaj yeem pom qhov kev nce qib ntawm qhov upload ntawm cov xwm txheej hauv qab qhov kev nce qib bar. Thaum kawg ntawm qhov kev nce qib, modem yuav rov pib dua thiab yuav pib nrog cov chaw tshiab.
Kauj ruam #8: Yog tias koj xav siv lub modem ntawm RS485 rau kev nyeem ntawv 'meter', ces koj yuav tsum hloov cov jumpers rau RS485 hom!

Ntxiv kev xaiv

Lub modem tuav tuaj yeem ua kom zoo dua ntawm qhov Saib xyuas pawg parameter.
Cov configured tsis yuav tsum tseg rau koj lub computer los ntawm cov File/Txuag zaub mov.
Txhim kho firmware: xaiv cov Cov khoom siv menu, thiab cov Ib leeg firmware upload yam khoom (qhov twg koj tuaj yeem upload qhov tsim nyog.DWL txuas ntxiv file). Tom qab kev nce qib ntawm kev upload, modem yuav rov pib dua thiab ua haujlwm nrog cov firmware tshiab thiab cov kev teeb tsa dhau los!

Txhawb nqa

Cov khoom muaj CE kos npe raws li European cov cai.
Cov ntaub ntawv khoom, software tuaj yeem pom ntawm cov khoom webqhov chaw: https://www.m2mserver.com/en/product/wm-e2sl/