PCE Instruments PCE-MPC 15 Ma'aunin Barbashi
Littattafan mai amfani a cikin yaruka daban-daban (Français, italiano, español, português, nederlands, türk, polski, русский, 中文) ana iya samun ta ta amfani da binciken samfuran mu akan: www.pce-instruments.com
Bayanan aminci
Da fatan za a karanta wannan littafin a hankali kuma gaba ɗaya kafin amfani da na'urar a karon farko. Ƙwararrun ma'aikata ne kawai za a iya amfani da na'urar kuma ma'aikatan PCE Instruments su gyara su. Lalacewa ko raunin da ya haifar ta rashin kiyaye littafin an cire su daga alhakinmu kuma ba garantin mu ya rufe shi ba.
- Dole ne a yi amfani da na'urar kawai kamar yadda aka bayyana a cikin wannan jagorar koyarwa. Idan aka yi amfani da shi in ba haka ba, wannan na iya haifar da yanayi mai haɗari ga mai amfani da lalacewa ga mita.
- Ana iya amfani da kayan aikin ne kawai idan yanayin muhalli (zazzabi, danshi mai dangi,…) suna cikin kewayon da aka bayyana a cikin ƙayyadaddun fasaha. Kada a bijirar da na'urar zuwa matsanancin zafi, hasken rana kai tsaye, matsanancin zafi ko danshi.
- Kada a bijirar da na'urar ga girgiza ko girgiza mai ƙarfi.
- ƙwararrun ma'aikatan PCE Instruments ne kawai ya kamata a buɗe shari'ar.
- Kada kayi amfani da kayan aiki lokacin da hannunka ya jike.
- Kada ku yi wani canje-canje na fasaha ga na'urar.
- Ya kamata a tsaftace kayan aikin tare da talla kawaiamp zane. Yi amfani da tsabtace tsaka-tsaki na pH kawai, babu abrasives ko kaushi.
- Dole ne kawai a yi amfani da na'urar tare da na'urorin haɗi daga PCE Instruments ko makamancin haka.
- Kafin kowane amfani, bincika harka don lalacewar bayyane. Idan kowace lalacewa ta ganuwa, kar a yi amfani da na'urar.
- Kada kayi amfani da kayan a cikin yanayi masu fashewa.
- Ba za a wuce iyakar ma'auni kamar yadda aka bayyana a cikin ƙayyadaddun bayanai ba a kowane hali.
- Rashin kiyaye bayanan aminci na iya haifar da lalacewa ga na'urar da rauni ga mai amfani.
Ba mu ɗauki alhakin buga kurakurai ko wasu kurakurai a cikin wannan littafin ba. Muna nuna ƙayyadaddun sharuɗɗan garantin mu waɗanda za a iya samun su a cikin sharuɗɗan kasuwancin mu gabaɗaya.
Ƙayyadaddun bayanai
| taro taro | |
| Girman barbashi masu aunawa | PM2.5/PM10 |
| Matsayin aunawa PM 2.5 | 0 … 1000 µg/m³ |
| Ƙaddamarwa | 1 µm |
| Daidaiton PM 2.5 | 0 … 100 µg/m³: ± 10 µg/m³ 101 … 1000 µm/m³: ± 10% na rdg. |
| Ƙunar barbashi | |
| Girman ɓangarorin da ake aunawa (PCE-MPC 15) | 0.3 / 0.5 da 10 µm |
| Girman ɓangarorin da ake aunawa (PCE-MPC 25) | 0.3 / 0.5 / 1.0 / 2.5 / 5.0 da 10 µm |
| Ƙaddamarwa | 1 |
| Daidaito | ma'auni masu nuni kawai |
| Matsakaicin adadin barbashi | 2,000,000 barbashi/l |
| Zazzabi | |
| Kewayon aunawa | -10 ... 60 °C, 14 ... 140 °F |
| Ƙaddamarwa | 0.01C, °F |
| Daidaito | ± 2 °C, ± 3.6 °F |
| Humidity (RH) | |
| Kewayon aunawa | 0… 100 % |
| Ƙaddamarwa | 0.01% |
| Daidaito | ± 3% |
| Ƙarin bayani dalla-dalla | |
| Lokacin amsawa | 1 dakika |
| Yankin dumama | 10 seconds |
| Haɗin hawa | 1/4 ″ haɗin haɗin gwiwa |
| Girman abun ciki | waje: 13 mm / 0.51 ″ ciki: 7 mm / 0.27 ″ tsawo: 35 mm / 1.37 ″ |
| Nunawa | 3.2 ″ LC launi nuni |
| Wutar lantarki (mains adaftar) | na farko: 100 … 240V AC, 50/60 Hz, 0.3 A na biyu: 5V DC, 2 A |
| Wutar lantarki (batir mai caji) | 18650, 3.7 V, 8.14 Wh |
| Rayuwar baturi | kusan awa 9 |
| Kashe wuta ta atomatik | kashe Mintuna 15, 30, 45 1, 2, 4, 8 hours |
| Memorywaƙwalwar ajiyar bayanai | ƙwaƙwalwar flash don kusan. Zagayen aunawa 12 Zagayowar ma'auni ɗaya ya ƙunshi maki 999 aunawa |
| Tazarar ajiya | 10, 30 daƙiƙa 1, 5, 10, 30, 60 mintuna |
| Girma | 222 x 80 x 46 mm / 8.7 x 3.1 x 1.8 ″ |
| Nauyi | 320 g / 11.2 oz |
Iyakar bayarwa
- 1 x PCE-MPC 15 ko PCE-MPC 25
- 1 x kaya
- 1 x 18650 baturi mai caji
- 1 x mini guda
- 1 x Kebul na Micro-USB
- 1 x adaftar main na USB
- 1 x littafin mai amfani
Bayanin na'urar
| A'a. | Bayani |
| 1 | Zazzabi da firikwensin zafi |
| 2 | Nunawa |
| 3 | Allon madannai |
| 4 | Abin sha |
| 5 | Micro-USB dubawa |
| 6 | tashar iska |
| 7 | Haɗin Tripod |
| 8 | Bangaren baturi |
| A'a. | Bayani |
| 1 | Maɓallin "ENTER" don tabbatar da shigarwa da buɗe abubuwan menu |
| 2 | Maɓallin "GRAPH" don canzawa zuwa hoto view |
| 3 | Maɓallin "MODE" don canza yanayin kuma don kewaya hagu |
| 4 | Maɓallin kunnawa/kashe don kunnawa da kashe mita da saitin sigina. |
| 5 | Maɓallin "ƘARAJAR ALARM" don saita iyakar ƙararrawa kuma don kewaya sama |
| 6 | Maɓallin lasifika don kunna da kashe ƙararrawar ƙararrawa |
| 7 | Maɓallin "SET" don buɗe sigogi kuma kewaya dama |
| 8 | Maɓallin “°C/°F” don zaɓar naúrar zafin jiki kuma don kewaya ƙasa |
Kunna da kashe mita
Don kunna mita da kashewa, danna kuma saki maɓallin kunnawa/kashe sau ɗaya. Bayan aikin farawa, ma'aunin yana farawa nan da nan. Don samun ƙididdige ƙididdiga na yanzu, bari mitar ta zana iska a cikin daki na yanzu na daƙiƙa 10 na farko.
View tsari
Don zaɓar tsakanin mutum ɗaya views, danna maɓallin "SET" akai-akai. Daban-daban views sune kamar haka.
| View | Bayani |
| Tagar aunawa | Ana nuna ƙimar da aka auna anan |
| "Littattafai" | Bayanan ma'aunin da aka ajiye na iya zama viewed nan |
| "Settings" | Saituna |
| "PDF" (PCE-MPC 25 kawai) | Ana iya tsara bayanan da aka adana anan |
Tagar aunawa
Zane view
Don canzawa zuwa hoto view, danna maɓallin "GRAPH". Anan, ana nuna yanayin ƙaddamarwar PM2.5. Yi amfani da maɓallin kibiya sama/ƙasa don gungurawa tsakanin ɗayan shafuka. Danna maɓallin "GRAPH" don komawa zuwa lamba view.
Lura: Don samun dama ga takamaiman wurin aunawa, je zuwa "Records" view, duba 6.2 Records.
Yawan barbashi da taro taro
Don canzawa tsakanin ƙidayar barbashi da taro, danna maɓallin "MODE".
Saita iyakar ƙararrawa
Don saita ƙimar iyakar ƙararrawa, danna maɓallin "ALARM VALUE" a cikin taga aunawa. Ana iya canza ƙimar tare da maɓallan kibiya. Danna maɓallin "ENTER" don karɓar ƙimar da aka saita. Don kunna ko kashe ƙararrawa, danna maɓallin lasifika. Idan an nuna mai magana don PM2.5, ƙararrawar ƙararrawa tana aiki.
Lura: Wannan ƙimar iyakar ƙararrawa tana nufin ƙimar PM2.5 kawai.
Rubuce-rubuce
A cikin "Records" view, wuraren aunawa da aka rubuta a halin yanzu na iya zama viewed. Don zaɓar tsakanin wuraren aunawa ɗaya, da farko danna maɓallin "ENTER". Sannan yi amfani da maɓallin kibiya don matsawa zuwa wurin aunawa da ake so. Danna maɓallin "ENTER" don samun damar zaɓar tsakanin views kuma.
Saituna
Don yin saituna, fara danna maɓallin "ENTER". Ana iya zaɓar siga yanzu tare da maɓallin kibiya sama/ ƙasa. Yi amfani da maɓallan kibiya na hagu da dama don canza siga daban-daban. Danna maɓallin "ENTER" don tabbatar da saitin.
| Saita | Ma'ana |
| KASHE Hasken Baya | Saita hasken baya |
| Tazarar rikodin | Saita tazarar rikodi. Lura: lokacin da aka saita tazara, rikodi yana farawa nan da nan. Ana iya ganin adadin bayanan ma'auni da aka rubuta a cikin taga aunawa. |
| Haske | Saitin haske |
| Share Data | Share bayanan ma'aunin da aka yi rikodi. Lura: Wannan ba shi da wani tasiri akan sararin žwažwalwar ajiya na PDFs da aka rigaya an ajiye su. |
| Lokaci & Kwanan wata | Saita kwanan wata da lokaci |
| Rufewar atomatik | Saita wuta ta atomatik |
| Harshe | Saita harshe |
| Sake saiti | Sake saita mita zuwa saitunan masana'anta |
Saitunan masana'anta
Idan an sake saita mita kamar yadda aka bayyana a cikin Saitunan 6.3, harshen zai canza ta atomatik zuwa Sinanci. Don canza yaren menu zuwa Turanci, kunna mita, danna maɓallin "SET" sau biyu, zaɓi abu na ƙarshe na biyu kuma danna maɓallin "SET".
Fitar da bayanan ma'auni "PDF" (PCE-MPC 25 kawai)
Bude "PDF" view ta hanyar latsa maɓallin "SET" akai-akai. Don fitarwa bayanan ma'aunin da aka yi rikodi, da farko zaɓi "Fitar da PDF". Ana haɗa bayanan da aka yi rikodi zuwa PDF file. Sannan haɗa mitar zuwa kwamfuta kuma zaɓi "Haɗa zuwa USB" a cikin na'urar don haɗawa da kwamfutar. A kan kwamfutar, ana nuna mita a matsayin na'urar adana bayanai da yawa kuma ana iya sauke PDFs.
Ta “Formatted Disk”, za a iya share yawan ƙwaƙwalwar ajiyar bayanai. Wannan ba shi da wani tasiri akan bayanan ma'aunin da aka yi rikodin a halin yanzu. Don komawa zuwa zaɓi na views, komawa zuwa maɓallin "Shift" tare da maɓallan kibiya.
Baturi
Ana iya karanta cajin baturi na yanzu daga alamar matakin baturi. Idan baturin yayi lebur, dole ne a maye gurbinsa ko caje shi ta hanyar kebul na Micro-USB. Ya kamata a yi amfani da tushen wuta 5 V DC 2 don cajin baturi. Don maye gurbin baturin, fara kashe mita. Sa'an nan kuma bude sashin baturi a baya kuma maye gurbin baturin. Tabbatar da polarity daidai.
Tuntuɓar
Idan kuna da wasu tambayoyi, shawarwari ko matsalolin fasaha, da fatan za ku yi shakka a tuntuɓe mu. Za ku sami bayanan tuntuɓar da suka dace a ƙarshen wannan jagorar mai amfani.
zubarwa
Don zubar da batura a cikin EU, umarnin 2006/66/EC na Majalisar Turai ya shafi. Saboda gurɓatattun abubuwan da ke ƙunshe, batir dole ne a zubar da shi azaman sharar gida. Dole ne a ba su wuraren tattarawa da aka tsara don wannan dalili. Domin bin umarnin EU 2012/19/EU muna ɗaukar na'urorin mu baya. Ko dai mu sake amfani da su ko kuma mu ba su ga kamfanin sake yin amfani da su wanda ke zubar da na'urorin daidai da doka. Ga ƙasashen da ke wajen EU, batura da na'urori yakamata a zubar dasu daidai da ƙa'idodin sharar gida. Idan kuna da wasu tambayoyi, tuntuɓi Kayan aikin PCE.
Bayanan tuntuɓar kayan aikin PCE
Jamus
PCE Deutschland GmbH
Ina Langel 26
Saukewa: D-59872
Deutschland
Lambar waya: +49 (0) 2903 976 99 0
Faks: + 49 (0) 2903 976 99 29
info@pce-instruments.com
www.pce-instruments.com/deutsch
Ƙasar Ingila
PCE Instruments UK Ltd. girma
Wurin shakatawa na Kasuwanci na 11 Southpoint
Ensign Way, Kuduampton
Hampshire
Ƙasar Ingila, SO31 4RF
Lambar waya: +44 (0) 2380 98703 0
Fax: +44 (0) 2380 98703 9
info@pce-instruments.co.uk
www.pce-instruments.com/hausa
Netherlands
PCE Brookhuis BV
Institutenweg 15
Saukewa: 7521PH
Nederland
Phone: + 31 (0) 53 737 01 92
info@pcebenelux.nl
www.pce-instruments.com/dutch
Faransa
PCE Instruments Faransa EURL
23, Rue de Strasbourg
67250 Soultz-Sous-Forets
Faransa
Waya: +33 (0) 972 3537 17
Lambar fax: +33 (0) 972 3537 18
info@pce-france.fr
www.pce-instruments.com/french
Italiya
PCE Italia srl
Ta hanyar Pesciatina 878 / B-Interno 6
55010 ku. Gragnano
Capannori (Lucca)
Italiya
Lambar waya: +39 0583 975 114
Fax: +39 0583 974 824
info@pce-italia.it
www.pce-instruments.com/italiano
Amurka ta Amurka
PCE Americas Inc. girma
1201 Jupiter Park Drive, Suite 8
Jupiter / Palm Beach
33458 fl
Amurka
Lambar waya: +1 561-320-9162
Fax: +1 561-320-9176
info@pce-americas.com
www.pce-instruments.com/us
Spain
PCE Ibérica SL
Call Mayor, 53
02500 Tobarra (Albacete)
España
Tel. : +34 967 543 548
Fax: +34 967 543 542
info@pce-iberica.es
www.pce-instruments.com/espanol
Turkiyya
PCE Teknik Cihazları Ltd.Şti.
Halkalı Merkez Mah.
Pehlivan Sok. Na 6/C
34303 Küçükçekmece – Istanbul
Turkiyya
Lambar waya: 0212 471 11 47
Lambar waya: 0212 705 53 93
info@pce-cihazlari.com.tr
www.pce-instruments.com/turkish
Denmark
PCE Instruments Denmark ApS
Birk Centerpark 40
7400 Herning
Denmark
Takardu / Albarkatu
 |
PCE Instruments PCE-MPC 15 Ma'aunin Barbashi [pdf] Manual mai amfani PCE-MPC 15 Counter Counter, PCE-MPC 15 |
