Allen-Bradley 1794-IB10XOB6 FLEX I/O Digital Input/Module Output
FLEX I/O Digital Input and Output Modules
Littafin Lissafi 1794-IB10XOB6, 1794-IB16XOB16P
| Taken | Shafi |
| Takaitacciyar Canje-canje | 1 |
| Ƙarsheview | 5 |
| Shigar da Module na Input/Fit ɗin Dijital | 5 |
| Saita Module ɗin ku | 8 |
| Ƙayyadaddun bayanai | 9 |
Takaitacciyar Canje-canje
Wannan ɗaba'ar ta ƙunshi sabbin ko sabunta bayanai masu zuwa. Wannan jeri ya ƙunshi ingantaccen sabuntawa kawai kuma ba a yi niyya don nuna duk canje-canje ba.
| Taken | Shafi |
| Sabunta samfuri | a ko'ina |
| Amincewa da Wuri Mai Haɗari na Burtaniya da Turai | 4 |
| Sabunta Yanayi na Musamman don Amintaccen Amfani | 4 |
| An sabunta IEC Amintaccen Wuri Mai Haɗari | 4 |
| Abubuwan da aka sabunta gabaɗaya | 10 |
| Sabunta Bayanan Muhalli | 10 |
| Sabunta Takaddun shaida | 11 |
HANKALI: Karanta wannan daftarin aiki da takaddun da aka jera a sashin Ƙarin Albarkatun game da shigarwa, daidaitawa da aiki na wannan kayan aiki kafin shigar, daidaitawa, sarrafa ko kula da wannan samfur. Ana buƙatar masu amfani su san kansu da umarnin shigarwa da wayoyi ban da buƙatun duk lambobi, dokoki, da ƙa'idodi. Ayyukan da suka haɗa da shigarwa, gyare-gyare, shigar da sabis, amfani, taro, rarrabuwa, da kiyayewa ana buƙatar ma'aikatan da suka dace da horarwa su aiwatar da su daidai da ƙa'idar aiki. Idan an yi amfani da wannan kayan aikin ta hanyar da masana'anta ba su kayyade ba, kariya ta kayan aikin na iya lalacewa
Muhalli da Kawaye
HANKALI: An yi nufin wannan kayan aikin don amfani da shi a cikin muhallin masana'antu na Digiri na 2 na gurɓataccen gurɓata, a cikin juzu'itage Aikace-aikacen rukuni na II (kamar yadda aka ayyana a cikin EN/IEC
60664-1), a tsayi har zuwa 2000 m (6562 ft) ba tare da lalata ba. Wannan kayan aikin ba a yi niyya don amfani da shi a wuraren zama ba kuma maiyuwa ba zai ba da cikakkiyar kariya ga ayyukan sadarwar rediyo a cikin irin waɗannan wuraren ba. Ana ba da wannan kayan aikin azaman buɗaɗɗen kayan aiki don amfanin cikin gida. Dole ne a ɗora shi a cikin wani shingen da aka ƙera da kyau don waɗancan ƙayyadaddun yanayin muhalli waɗanda za su kasance kuma an tsara su yadda ya kamata don hana rauni na mutum wanda ke haifar da damar zuwa sassan rayuwa. Dole ne wurin ya kasance yana da kyawawan kaddarorin da ke hana harshen wuta don hana ko rage yaɗuwar harshen wuta, daidai da ƙimar yada harshen wuta na 5V A ko kuma a amince da shi don
aikace-aikace idan nonmetallic. Dole ne a sami damar shiga ciki ta hanyar amfani da kayan aiki kawai. Sashe na gaba na wannan ɗaba'ar na iya ƙunsar ƙarin bayani game da takamaiman ƙididdiga nau'in shinge waɗanda ake buƙata don biyan wasu takaddun amincin samfur. Baya ga wannan ɗaba'ar, duba waɗannan abubuwa:
- Ka'idodin Waya Automation Automation na Masana'antu, bugu 1770-4.1, don ƙarin buƙatun shigarwa.
- NEMA Standard 250 da EN/IEC 60529, kamar yadda ya dace, don bayani game da matakan kariya da aka bayar ta hanyar shinge.
HANKALI: Karanta wannan daftarin aiki da takaddun da aka jera a sashin Ƙarin Albarkatun game da shigarwa, daidaitawa, da aiki na wannan kayan aiki kafin shigar, daidaitawa, sarrafa, ko kula da wannan samfur. Ana buƙatar masu amfani su san kansu da umarnin shigarwa da wayoyi ban da buƙatun duk lambobi, dokoki, da ƙa'idodi. Ana buƙatar shigarwa, gyare-gyare, shigar da sabis, amfani, haɗawa, rarrabuwa, da kiyayewa da ƙwararrun ma'aikatan da suka dace su yi daidai da ƙa'idar aiki. Idan akwai matsala ko lalacewa, bai kamata a yi ƙoƙarin gyarawa ba. Ya kamata a mayar da tsarin zuwa ga masana'anta don gyarawa. Kar a wargaza tsarin.
Hana Fitar Electrostatic
HANKALI: Wannan kayan aiki yana kula da fitarwa na lantarki, wanda zai iya haifar da lalacewa na ciki kuma ya shafi aiki na al'ada. Bi waɗannan jagororin lokacin da kuke sarrafa wannan kayan aiki:
- Taɓa ƙasan abu don fitar da yuwuwar a tsaye.
- Saka madaidaicin wuyan hannu na ƙasa.
- Kar a taɓa masu haɗawa ko fil akan allunan abubuwan da suka shafi abubuwa.
- Kar a taɓa abubuwan da'ira a cikin kayan aiki.
- Yi amfani da madaidaicin wurin aiki, idan akwai.
- Ajiye kayan aiki a cikin marufi mai aminci a tsaye lokacin da ba a amfani da shi.
Sharuɗɗa na Musamman don Amintaccen Amfani
HANKALI:
- An kafa wannan samfurin ta hanyar dogo na DIN zuwa ƙasan chassis. Yi amfani da tutiya plated chromate-passivated karfe DIN dogo don tabbatar da ƙasa mai kyau. Amfani da
sauran kayan dogo na DIN (misaliample, aluminum ko filastik) wanda zai iya lalata, oxidize, ko kuma maras kyau jagoranci, na iya haifar da ƙasa mara kyau ko tsaka-tsaki.
Amintaccen dogo na DIN zuwa saman hawa kusan kowane 200 mm (7.8 in.) kuma amfani da anka na ƙarshe daidai. Tabbatar da saukar da layin dogo DIN yadda ya kamata. Koma zuwa
Ka'idodin Waya Automation Automation na Masana'antu, bugu 1770-4.1, don ƙarin bayani. - Kar a cire ko musanya rukunin tushe na tasha yayin da ake amfani da wuta. Katsewar jirgin baya na iya haifar da aiki marar niyya ko motsi na inji.
- Kar a cire ko musanya Module Adafta yayin da ake amfani da wuta. Katsewar jirgin baya na iya haifar da aiki marar niyya ko motsi na inji.
- Idan ana amfani da wannan kayan aikin ta hanyar da masana'antun basu bayyana ba, kariyar da kayan aikin ke bayarwa na iya nakasa.
GARGADI:
- Lokacin da kuka saka ko cire samfurin yayin da wutar jirgin baya ke kunne, baka na lantarki na iya faruwa. Wannan zai iya haifar da fashewa a cikin ma'auni na wurare masu haɗari.
Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba. Maimaita harbin wutar lantarki yana haifar da lalacewa da yawa ga lambobi a kan tsarin duka biyun
da mating connector. Lambobin da suka sata na iya haifar da juriya na lantarki wanda zai iya shafar aikin ƙirar. - Idan ka saka ko cire samfurin yayin da wutar jirgin baya ke kunne, baka na lantarki na iya faruwa. Wannan zai iya haifar da fashewa a cikin ma'auni na wurare masu haɗari. Kasance
Tabbatar cewa an cire wutar lantarki ko kuma yankin ba shi da haɗari kafin a ci gaba. - Lokacin da aka yi amfani da shi a cikin Class I, Division 2, wuri mai haɗari, dole ne a ɗora wannan kayan aiki a cikin wurin da ya dace tare da ingantacciyar hanyar wayar da ta dace da
lambobin lantarki masu mulki
GARGADI: Idan kun haɗa ko cire haɗin waya yayin da wutar gefen filin ke kunne, baka na lantarki na iya faruwa. Wannan na iya haifar da fashewa a wuri mai haɗari
shigarwa. Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba.
La'akarin Tsaron Wutar Lantarki
HANKALI:
- An ba da izinin wannan kayan aikin don amfani kawai a cikin kewayon yanayin zafin iska na -20…55 °C (-4…131 °F). Kada a yi amfani da kayan aiki a wajen wannan
iyaka. - Yi amfani da busasshiyar kyalle mai tsauri kawai don goge kayan aiki. Kada ku yi amfani da kowane kayan tsaftacewa.
Yarda da Wuri Mai Haɗari na Burtaniya da Turai
Module mai zuwa shine yankin Turai 2 da aka amince dashi: 1794-IB10XOB6.
Mai zuwa ya shafi samfuran da aka yiwa alama II 3G:
- Rukunin Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayanka na 3, kuma suna bin Mahimman Bukatun Lafiya da Tsaro da suka shafi ƙira da gina irin waɗannan kayan aikin da aka bayar a cikin Jadawalin 1 na UKEX da Annex II na EU Directive 2014/34/EU. Duba UKEx da EU Declaration of Conformity a rok.auto/certifications don cikakkun bayanai.
- Nau'in kariya shine Ex ec IIC T3 Gc bisa ga EN IEC 60079-0: 2018, FASAHA ATMOSPHERES - KASHI NA 0: KAYAN AIKI - BUKATAR JAMA'A, Ranar fitowa 07/2018 da EN IEC 60079-7: Explosive ATMOSPHERES yanayi. Kariyar kayan aiki ta ƙarin aminci "e".
- Daidaita daidaitattun TS EN 60079-0: 2018, ATMOSPHERES masu fashewa - Sashe na 0: Kayayyakin - Bukatun Gabaɗaya, Ranar fitowa 07/2018 Kariyar kayan aiki ta ƙara aminci "e", lambar takardar shedar DEMKO 60079 ATEX 7X da UL2015UKEX1X.
- An yi nufin amfani da su a wuraren da iskar gas, tururi, hazo, ko iska ba zai iya faruwa ba, ko kuma zai iya faruwa ba safai ba kuma na ɗan gajeren lokaci. Irin waɗannan wuraren sun dace da rarrabuwar yankin 2 bisa ga ka'idar UKEX 2016 No. 1107 da ATEX umarnin 2014/34/EU.
GARGADI: Sharuɗɗa na Musamman don Amintaccen Amfani
- Wannan kayan aikin baya juriya ga hasken rana ko wasu tushen hasken UV.
- Wannan kayan aikin za a ɗora shi a cikin ƙayyadaddun shinge na UKEX/ATEX/IECEx 2 tare da ƙaramin ƙimar kariya ta shiga aƙalla IP54 (daidai da EN/IEC 60079-0) kuma a yi amfani da shi a cikin yanayin da bai wuce Digiri na 2 ba (kamar yadda An bayyana shi a cikin EN/IEC 60664-1) lokacin da aka yi amfani da shi a cikin mahalli na Zone 2. Dole ne a sami damar shiga wurin ta amfani da kayan aiki kawai.
- Wannan kayan aikin za a yi amfani da shi a cikin ƙayyadaddun ƙimar da Rockwell Automation ya ayyana.
- Dole ne a samar da kariya ta wucin gadi wacce aka saita a matakin da bai wuce 140% na mafi girman ƙimar vol.tage darajar a samar da tashoshi zuwa kayan aiki.
- Dole ne a yi amfani da wannan kayan aikin tare da UKEX/ATEX/IECEx bokan Rockwell Automation backplanes.
- Kiyaye duk wani haɗin waje na waje wanda ya haɗu da wannan kayan aiki ta amfani da sukurori, latches na zamewa, masu haɗin zaren, ko wasu hanyoyin samar da wannan samfur.
- Kar a cire haɗin kayan aiki sai dai idan an cire wuta ko kuma an san yankin ba shi da haɗari.
- Ana samun ƙasa ta hanyar hawan kayayyaki akan dogo.
Amincewar Wuri Mai Haɗari IEC
Abubuwan da ke biyowa sun shafi samfuran da aka yiwa alama da takaddun IECEx:
- An yi nufin amfani da su a wuraren da iskar gas, tururi, hazo, ko iska ba zai iya faruwa ba, ko kuma zai iya faruwa ba safai ba kuma na ɗan gajeren lokaci. Irin waɗannan wuraren sun dace da rarrabuwar Yanki 2 zuwa IEC 60079-0.
- Nau'in kariya shine Ex ec IIC T3 Gc bisa ga IEC 60079-0 da IEC 60079-7.
- Bincika ka'idoji IEC 60079-0 Abubuwan fashewar yanayi Sashe na 0: Kayan aiki - Gabaɗaya buƙatun, Edition 7, Ranar Bita 2017, IEC 60079-7 , Tunanin lambar takardar shaidar IECEx IECEx UL 5.1X.
Amincewa da Wuri Mai Haɗari na Arewacin Amurka
Abubuwan 1794-IB10XOB6 da 1794-IB16XOB16P sun amince da Wuri Mai Haɗari
| Bayanin mai zuwa yana aiki lokacin aiki da wannan kayan aiki a ciki wurare masu haɗari: | |
| Kayayyakin da aka yiwa alama "CL I, DIV 2, GP A, B, C, D" sun dace don amfani a cikin Rukunin Class I Division 2 A, B, C, D, Wurare masu haɗari da wurare marasa haɗari kawai. Ana ba da kowane samfur tare da alamomi akan farantin suna mai nuni da lambar yanayin zafin wuri mai haɗari. Lokacin haɗa samfura a cikin tsarin, ƙila a yi amfani da lambar mafi ƙarancin zafin jiki (lambar “T” mafi ƙasƙanci) don taimakawa ƙayyadaddun lambar yanayin yanayin gabaɗayan tsarin. Haɗin kayan aiki a cikin tsarin ku yana ƙarƙashin bincike daga Hukumar da ke da iko a lokacin
na shigarwa. |
|
| GARGADI:
Fashewa Hazard – Kar a cire haɗin kayan aiki sai dai idan an cire wuta ko kuma an san wurin ba shi da haɗari. Kar a cire haɗin haɗi zuwa wannan kayan aikin sai dai idan an cire wuta ko kuma an san wurin ba shi da haɗari. Kiyaye duk wani haɗin waje na waje wanda ya haɗu da wannan kayan aiki ta amfani da sukurori, latches na zamewa, masu haɗin zaren, ko wasu hanyoyin samar da wannan samfur. Sauya abubuwan da aka gyara na iya lalata dacewa ga Class I, Division 2. |
|
Ƙarsheview
| Bayani | Bayani | ||
| 1 | Maɓalli | 5 | alignment mashaya |
| 2 | Tushen tashar | 6 | Tsagi |
| 3 | Mai haɗin Flexbus | 7 | Tsarin latching |
| 4 | Module |
Shigar da Module na Input/Fit ɗin Dijital
Tsarin FLEX™ I/O 1794-IB10XOB6 yana hawa akan tushe na 1794-TB3 ko 1794-TB3S. Module na 1794-IB16XOB16P yana hawa akan tashar tashar 1794-TB32 ko 1794-TB32S.
HANKALI: Yayin hawan duk na'urori, tabbatar da cewa duk tarkace (kwayoyin ƙarfe, igiyoyin waya, da sauransu) an kiyaye su daga faɗuwa cikin tsarin. Barazanar da ke faɗowa a cikin tsarin na iya haifar da lalacewa a kan wutar lantarki.
- Juya maɓallan maɓalli (1) akan madannin tasha (2) kusa da agogo zuwa matsayi 2 kamar yadda ake buƙata don irin wannan nau'in.
- Tabbatar cewa an tura mai haɗin Flexbus (3) har zuwa hagu don haɗi tare da tushe/adaftar tashar maƙwabta. Ba za ku iya shigar da tsarin ba sai dai idan mai haɗin ya cika cikakke.
- Tabbatar cewa fil ɗin da ke ƙasan tsarin suna madaidaiciya don haka za su daidaita daidai da mai haɗawa a gindin tashar.
- Sanya module ɗin (4) tare da sandar daidaitawarsa (5) mai daidaitawa tare da tsagi (6) akan gindin tasha.
- Latsa da ƙarfi kuma a ko'ina don zaunar da tsarin a rukunin tushe na tasha. Module yana zaune a lokacin da aka kulle tsarin latching (7) a cikin tsarin.
Haɗa Wiring don 1794-IB10XOB6
- Haɗa shigarwar mutum ɗaya da na'urar fitarwa zuwa tashoshi masu ƙididdigewa akan layi na 0…15 (A) kamar yadda aka nuna a Tebu 1.
- Haɗa haɗin wutar lantarki +V DC na na'urar shigarwa zuwa madaidaicin tasha akan jere na 34…51 (C) don kowane shigarwa kamar yadda aka nuna a cikin Tebu 1. )
- Haɗa na'urar shigar da ke da alaƙa gama gari (na'urorin waya-3 kawai) da na'urar fitarwa gama-gari zuwa madaidaitan tashoshi a jere na 16…33. (B) ga kowane shigarwa da fitarwa kamar yadda aka nuna a cikin Table 1. (Ana haɗa na kowa ciki tare.)
- Haɗa wutar +V DC zuwa tasha 34 akan layin 34…51 (C).
- Haɗa V DC gama gari zuwa tasha 16 akan layi na 16…33 (B).
- Idan daisychaining ikon zuwa tashar tasha ta gaba, haɗa jumper daga tasha 51 (+V DC) akan wannan rukunin tushe zuwa tasha 34 akan rukunin tushe na gaba.
- Idan ci gaba da DC gama gari zuwa naúrar tushe na gaba, haɗa mai tsalle daga tasha 33 (na kowa) akan wannan rukunin tushe zuwa tasha 16 akan rukunin tushe na gaba.
Haɗin Wiring don 1794-IB10XOB6
| Shigarwa(1) | Sigina | Komawa | wadata |
nutse shigarwa
| Shiga 0 | A-0 | B-17 | C-35 |
| Shiga 1 | A-1 | B-18 | C-36 |
| Shiga 2 | A-2 | B-19 | C-37 |
| Shiga 3 | A-3 | B-20 | C-38 |
| Shiga 4 | A-4 | B-21 | C-39 |
| Shiga 5 | A-5 | B-22 | C-40 |
| Shiga 6 | A-6 | B-23 | C-41 |
| Shiga 7 | A-7 | B-24 | C-42 |
| Shiga 8 | A-8 | B-25 | C-43 |
| Shigarwa(1) | Sigina | Komawa | wadata |
| Shiga 9 | A-9 | B-26 | C-44 |
Source fitarwa
| Fitarwa 0 | A-10 | B-27 | – |
| Fitarwa 1 | A-11 | B-28 | – |
| Fitarwa 2 | A-12 | B-29 | – |
| Fitarwa 3 | A-13 | B-30 | – |
| Fitarwa 4 | A-14 | B-31 | – |
| Fitarwa 5 | A-15 | B-32 | – |
| + V DC | C-34 zuwa C-51 (haɗin ciki tare) | ||
| Na kowa | B-16 zuwa B-33 (haɗin ciki tare) | ||
2-waya shigarwa na'urorin amfani da sigina da wadata tashoshi; Na'urorin waya 3 suna amfani da sigina, dawowa, da tashar samar da kayayyaki
1794-TB3 da 1794-TB3S Terminal Base Wiring don 1794-IB10XOB6
2 da 3-Wire Input Waya don 1794-IB10XOB6
Haɗa Wiring don 1794-IB16XOB16P
- Haɗa wayoyi na shigar da mutum ɗaya (IN0 zuwa IN15) zuwa tashoshi masu ƙididdigewa akan layi na 0…15 (A) kamar yadda aka nuna a Tebu 2 a shafi na 7.
- Haɗa ikon da ke da alaƙa zuwa tashar +V1 (35, 37, 39 ko 41) akan layi na 34…51 (C) kamar yadda aka nuna a Tebu 2 akan shafi na 7.
- Haɗa haɗin gama gari (-V1) don IN0 zuwa IN15 zuwa COM1 (tasha 36, 38, 40 ko 42) akan jere na 34…51 (C).
- Haɗa wayoyi na fitarwa ɗaya ɗaya (OUT0 zuwa OUT15) zuwa tashoshi 17 zuwa 32 akan jeri na 16…33 (B) kamar yadda aka nuna a Tebu 2 akan shafi na 7. (Lura: Kada a haɗa zuwa tashoshi 16 ko 33.)
- Haɗa ikon da ke da alaƙa zuwa tashar +V2 (43, 45, 47 ko 49) akan layi na 34…51 (C) kamar yadda aka nuna a Tebu 2 akan shafi na 7.
- Haɗa haɗin gama gari (-V2) don OUT0 zuwa OUT15 zuwa COM2 (tasha 44, 46, 48 ko 50) akan jere na 34…51 (C).
- Idan ci gaba da shigar da wayoyi zuwa naúrar tushe ta gaba, haɗa jumper daga tasha 41(+V1) zuwa tashar wutar lantarki akan rukunin tushe na gaba; haɗa jumper daga tasha 42 (COM1) zuwa tasha gama gari akan rukunin tushe na gaba.
- Idan ci gaba da wayoyi masu fitarwa zuwa naúrar tushe ta gaba, haɗa jumper daga tashar 49 (+V2) zuwa tashar wutar lantarki akan rukunin tushe na gaba; haɗa jumper daga tasha 50 (COM2) zuwa tasha gama gari akan rukunin tushe na gaba.
Haɗin Waya don 1794-IB16XOB16P
| Shigarwa | Sigina | Komawa | wadata(1) |
| Shiga 0 | A-0 |
V1 Komawa an haɗa zuwa tashoshi 36, 38, 40, kuma 42 |
+ V1 an haɗa zuwa tashoshi 35, 37, 39, kuma 41 |
| Shiga 1 | A-1 | ||
| Shiga 2 | A-2 | ||
| Shiga 3 | A-3 | ||
| Shiga 4 | A-4 | ||
| Shiga 5 | A-5 | ||
| Shiga 6 | A-6 | ||
| Shiga 7 | A-7 | ||
| Shiga 8 | A-8 | ||
| Shiga 9 | A-9 | ||
| Shiga 10 | A-10 | ||
| Shiga 11 | A-11 | ||
| Shiga 12 | A-12 | ||
| Shiga 13 | A-13 | ||
| Shiga 14 | A-14 | ||
| Shiga 15 | A-15 | ||
| Fitarwa 0 | B-17 |
V2 Komawa an haɗa zuwa tashoshi 44, 46, 48, kuma 50 |
+ V2 an haɗa zuwa tashoshi 43, 45, 47, kuma 49 |
| Fitarwa 1 | B-18 | ||
| Fitarwa 2 | B-19 | ||
| Fitarwa 3 | B-20 | ||
| Fitarwa 4 | B-21 | ||
| Fitarwa 5 | B-22 | ||
| Fitarwa 6 | B-23 | ||
| Fitarwa 7 | B-24 | ||
| Fitarwa 8 | B-25 | ||
| Fitarwa 9 | B-26 | ||
| Fitarwa 10 | B-27 | ||
| Fitarwa 11 | B-28 | ||
| Fitarwa 12 | B-29 | ||
| Fitarwa 13 | B-30 | ||
| Fitarwa 14 | B-31 | ||
| Fitarwa 15 | B-32 | ||
| + V1 DC wutar lantarki | Tashar wutar lantarki 35, 37, 39, da 41 | ||
| Com1 DC dawowa | Matsakaicin gama gari 36, 38, 40, da 42 | ||
| + V2 DC wutar lantarki | Tashar wutar lantarki 43, 45, 47, da 49 | ||
| Com2 DC dawowa | Matsakaicin gama gari 44, 46, 48, da 50 | ||
2-waya shigarwa na'urorin amfani da sigina da wadata tashoshi; Na'urorin waya 3 suna amfani da sigina, dawowa, da tashar samar da kayayyaki
1794-TB32 Terminal Base Wiring don 1794-IB16XOB16P
Saita Module ɗin ku
Kuna saita tsarin ku ta hanyar saita rago a cikin kalmar daidaitawa (kalmar 3).
Taswirar Ƙwaƙwalwar Hoto na Hotuna don Module na 1794-IB10XOB6
| Dec | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| Oct | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| Karanta 1 | Ba a yi amfani da shi ba | I9 | I8 | I7 | I6 | I5 | I4 | I3 | I2 | I1 | I0 | |||||
| Rubuta 2 | Ba a yi amfani da shi ba | O5 | O4 | O3 | O2 | O1 | O0 | |||||||||
| Rubuta 3 | Ba a yi amfani da shi ba | FT | Ba a yi amfani da shi ba | |||||||||||||
| Dec | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| Oct | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| Karanta 1 | I15 | I14 | I13 | I12 | I11 | I10 | I9 | I8 | I7 | I6 | I5 | I4 | I3 | I2 | I1 | I0 |
| Rubuta 2 | O15 | O14 | O13 | O12 | O11 | O10 | O9 | O8 | O7 | O6 | O5 | O4 | O3 | O2 | O1 | O0 |
| Rubuta 3 | Ba a yi amfani da shi ba | Shigar da tace FT 0…15 | ||||||||||||||
Saita Lokacin Tace Mai Shigarwa
Don saita lokacin tace shigarwar, saita rago masu alaƙa a cikin hoton fitarwa (madaidaicin kalma) don ƙirar.
Don misaliample, don ƙara lokacin tacewa zuwa 8 ms don duk abubuwan shiga a adireshin rack 1, rukunin module 0, a cikin kalmar sanyi 3, saita rago kamar yadda aka nuna.
Lokacin Tace Shigarwa
| Bits(1) | Bayani | |||
| 02 | 01 | 00 | Tace Lokacin shigarwa | Kashe zuwa Kunnawa ku Kashe |
| 10 | 09 | 03 | ||
| 0 | 0 | 0 | Tace lokaci 0 | 0.25 ms |
| 0 | 0 | 1 | Tace lokaci 1 | 0.5 ms |
| 0 | 1 | 0 | Tace lokaci 2 | 1.0 ms |
| 0 | 1 | 1 | Tace lokaci 3 | 2.0 ms |
| 1 | 0 | 0 | Tace lokaci 4 | 4.0 ms |
| 1 | 0 | 1 | Tace lokaci 5 | 8.0 ms |
| 1 | 1 | 0 | Tace lokaci 6 | 16.0 ms |
| 1 | 1 | 1 | Tace lokaci 7 | 32.0 ms |
Ƙayyadaddun bayanai
| Siffa | 1794-Saukewa: IB10XOB6 | 1794-Saukewa: IB16XOB16P |
| Adadin abubuwan shigarwa, halin yanzu, nutsewa | 10 | 16 |
| Adadin abubuwan da aka fitar, halin yanzu, tushen tushe | 6 | 16 |
| Na'ura mai tushe da aka ba da shawarar | 1794-TB2, 1794-TB3,1794-TB3S, 1794-TB3K, 1794-TB3SK, 1794-TBKD, 1794-TB37DS | 1794-TB32, 1794-TB32S, 1794-TB62DS, 1794-TB62EXD4X15 |
| On-jihar voltage, shigar Min
Noma Max |
10V DC
24V DC 31.2V DC |
|
| Halin halin yanzu, shigar da Min
Noma Max |
2.0 mA
8.0mA @ 24V DC 11.0 mA |
2.0 mA
8.8mA @ 24V DC 12.1 mA |
| Off-jihar voltage, shigar, max | 5V DC | |
| Ƙarshen halin yanzu, shigarwa, max | 1.5 mA | |
| Ƙunƙarar shigar da ƙima | 4.8 kΩ | 2.5 kΩ |
| Lokacin tacewa(1) Kashe Zuwa Kunnawa
Kunna zuwa Kashe |
Duba Tebur 3 a shafi na 8 |
|
| On-jihar voltage kewayon, fitarwa Min
Noma Max |
10V DC 24V DC 31.2V DC (duba Hoto na 1 a shafi na 11) |
|
| Yanayin halin yanzu, Minti mai fitarwa, kowane tashoshi
Nom, kowane tashar Max, kowane module |
1.0 mA
2.0 da 10 A |
1.0 mA
0.5 da 8 A |
| Off-jihar voltage, fitarwa, max | 31.2V DC | |
| Fitar da ƙimar halin yanzu kowane fitarwa
kowane module, max |
2 A
10 A |
0.5 da 8 A |
| Rage halin yanzu | 4 A na 50 ms, mai maimaitawa kowane s 2 | 1.5 A na 50 ms, mai maimaitawa kowane s 2 |
| A halin yanzu yoyon waje na waje, max | 0.5 mA | |
| On-jihar voltagda zuw, max | 1V DC @ 2A
0.5V DC @ 1 A |
0.5V DC @ 1 A |
| Jinkirin siginar fitarwa, max(2) Kashe Zuwa Kunnawa
Kunna zuwa Kashe |
0.5 ms 1.0 ms |
|
| Kadaici voltage | 50V (ci gaba), Nau'in Insulation na asali
Nau'in da aka gwada @ 1250V AC don 60s, tsakanin gefen filin da tsarin Babu keɓewa tsakanin tashoshi ɗaya |
50V (ci gaba), Nau'in Insulation na asali
An gwada @ 2121V DC na 1 s, tsarin zuwa I/O da abubuwan shigar da bayanai Babu keɓewa tsakanin tashoshi ɗaya |
| Flexbus na yanzu | 50 mA | 80 mA |
| Rashin wutar lantarki, max | 6.0W @ 31.2V DC | 7.0W @ 31.2V DC |
| Rushewar thermal, max | 20.3 BTU/h @ 31.2V DC | 23.9 BTU/h @ 31.2V DC |
| Usingorawa | Abubuwan da aka fitar ba a haɗa su ba. Ana ba da shawarar fusing. Idan ana son fusing, dole ne a samar da fusing na waje. Yi amfani da SAN-O MQ4-3A ko Littelfuse 235-003 fuses. | Abubuwan da aka samu suna da kariya ta hanyar lantarki |
- Kashewa zuwa Kunna lokacin tacewa shine lokacin daga ingantacciyar siginar shigarwa zuwa fitarwa ta tsarin. Lokacin shigarwa zuwa Kashe tace lokaci ne daga siginar shigar da ke faɗuwa ƙasa da ingantaccen matakin zuwa ganewa ta hanyar ƙirar.
- Kashewa zuwa Kunnawa ko Kunnawa jinkiri shine lokacin daga module ɗin yana ba da fitarwa a kunne ko kashewa har sai an kunna ko kashewa.
Gabaɗaya Bayani
| Siffa | 1794-Saukewa: IB10XOB6 | 1794-Saukewa: IB16XOB16P |
| Matsakaicin karfin juzu'i na tushe | Ƙaddara ta hanyar kafa ta tushe | |
| Girma, kimanin. (H x W x D) | 94 x 94 x 69 mm (3.7 x 3.7 x 2.7 in.) | |
| Alamun shigarwa (alamar gefen filin) | 10 rawaya matsayi Manuniya | 16 rawaya matsayi Manuniya |
| Ma'anonin fitarwa (alamu na gefen fili) | 6 rawaya matsayi Manuniya | |
| Wutar DC na waje voltage kewayon | 10…31.2V DC (ya haɗa da 5% AC ripple) | |
|
Wurin samar da wutar lantarki na waje na yanzu |
8m A @ 10V DC
15mA @ 19.2V DC 19mA @ 24V DC 25mA @ 31.2V DC |
78mA @ 10V DC |
| Lambar yanayi ta Arewacin Amurka | T3C | |
| IECEx temp code | T3 | – |
| UKEX/ATEX lambar temp | T3 | |
| Matsayin maɓalli | 2 | |
| Ƙididdiga nau'in shinge | Babu (buɗaɗɗen salo) | |
| Nauyi, kimanin. | 85 g (3.00 oz) | 98 g (3.46 oz) |
| Girman waya | Ƙaddara ta hanyar kafa ta tushe | |
| Kashi na wayoyi(1) | 2- akan tashoshin sigina | |
(1) Yi amfani da wannan bayanin Rukunin Gudanarwa don tsara tsarin tafiyar jagora kamar yadda aka bayyana a cikin Manual ɗin shigar da matakin da ya dace. Hakanan duba Jagorar Waya Automation na Masana'antu da Grounding, bugu 1770-4.1, don ƙarin bayani.
Ƙayyadaddun Muhalli
| Siffa | 1794-Saukewa: IB10XOB6 | 1794-Saukewa: IB16XOB16P |
|
Yanayin aiki |
IEC 60068-2-1 (Ad Gwajin, sanyi mai aiki),
IEC 60068-2-2 (Gwajin Bd, aiki bushe zafi), IEC 60068-2-14 (Gwajin Nb, girgiza zafin zafi): |
|
| -20…+55°C (-4…+131°F) | 0…55C (32…131°F) | |
|
Yanayin ajiya |
IEC 60068-2-1 (Gwajin Ab, sanyi mara fakitin mara aiki),
IEC 60068-2-2 (Gwajin Bb, busassun zafi mara fakiti) IEC 60068-2-14 (Gwajin Na, ba tare da fakitin zafin zafi ba): -40…+85°C (-40…+185°F) |
|
| Zazzabi, kewaye da iska, max | 55°C (131°F) | |
| Dangi zafi | IEC 60068-2-30 (Gwajin Db, wanda ba a kunshe da damp zafi): 5…95% rashin kwanciyar hankali | |
| Jijjiga | IEC60068-2-6 (Gwajin Fc, aiki): 5g @ 10…500 Hz | |
|
Girgiza kai |
IEC 60068-2-27 (Gwajin Ea, girgiza da ba a kunshe ba): Aiki 30 g
50 g ba aiki |
|
| Fitarwa | Saukewa: IEC61000-6-4 | |
| ESD rigakafi | IEC 61000-4-2:
6kV lamba fitarwa 8 kV iska fitarwa |
|
| Radiated RF rigakafi | IEC 61000-4-3:
10V/m tare da 1 kHz sine-wave 80% AM daga 80… 6000 MHz |
|
| EFT/B rigakafi | IEC 61000-4-4:
± 3 kV @ 5 kHz akan tashoshin wutar lantarki ± 2 kV @ 5 kHz akan tashoshin sigina |
IEC 61000-4-4:
± 2 kV @ 5 kHz akan tashoshin wutar lantarki ± 2 kV @ 5 kHz akan tashoshin sigina |
| Rashin rigakafi na wucin gadi | IEC 61000-4-5:
± 1 kV layin-layi (DM) da ± 2 kV layin-duniya (CM) akan tashoshin sigina |
|
| An gudanar da rigakafin RF | IEC 61000-4-6:
10V rms tare da 1 kHz sine-wave 80% AM daga 150 kHz… 80 MHz |
|
Takaddun shaida
| Takaddun shaida
(Lokacin da Samfura Is Alama)(1) |
Daraja |
|
c-UL-mu |
(1794-IB10XOB6 kawai)
UL Jerin Kayan Kayan Aikin Masana'antu, wanda aka ba da izini ga Amurka da Kanada. Duba UL File E65584. UL da aka jera don Class I, Rukuni na 2 A, B, C, D wurare masu haɗari, ƙwararrun Amurka da Kanada. Duba UL File E194810. (1794-IB16XOB16P kawai) UL Jerin Kayan Kayan Aikin Masana'antu, wanda aka ba da izini ga Amurka da Kanada. Duba UL File E322657. UL da aka jera don Class I, Rukuni na 2 A, B, C, D wurare masu haɗari, ƙwararrun Amurka da Kanada. Duba UL File E334470. |
|
UK da CE |
Kayayyakin Dokokin Burtaniya 2016 No. 1091 da Tarayyar Turai 2014/30/EU EMC Umarnin, mai yarda da: EN 61326-1; Meas./Control/Lab., Abubuwan Buƙatun Masana'antu
EN 61000-6-2; Kariya na Masana'antu TS EN 61131-2; Masu Gudanar da Shirye-shiryen EN 61000-6-4; Fitar masana'antu Kayayyakin Dokokin Burtaniya 2012 No. 3032 da Tarayyar Turai 2011/65/EU RoHS, mai yarda da: EN 63000; Takardun fasaha |
|
Ex |
Kayayyakin Dokokin Burtaniya 2016 No. 1107 da Jagoran Tarayyar Turai 2014/34/EU ATEX, mai dacewa da: EN IEC 60079-0; Gabaɗaya Bukatun
EN IEC 60079-7; Halaye masu fashewa, Kariya "e" II 3 G Ex ec IIC T3 Gc DEMKO 14 ATEX 1342501X UL22UKEX2378X |
| TÜV | (1794-IB10XOB6 kawai)
Tabbataccen TÜV don Tsaron Aiki: har zuwa kuma gami da SIL 2 |
| KC | Rijistar Koriya na Kayan Watsa Labarai da Kayan Sadarwa, wanda ya dace da: Mataki na 58-2 na Dokar Waves Radio, Sashe na 3 |
| KOWANE | Ƙungiyar Kwastam ta Rasha TR CU 020/2011 EMC Dokokin Fasaha |
|
IECEx |
Tsarin IECEx, mai dacewa da:
IEC 60079-0; Gabaɗaya Bukatun IEC 60079-7; Halaye masu fashewa, Kariya “e” Ex ec IIC T3 Gc IECEx UL 14.0066 |
| CCC | Saukewa: CNCA-C23-01
CNCA-C23-01 CCC Dokokin Aiwatar da Fashe-Tabbacin Samfuran Lantarki |
| Maroko | Arrêté ministériel n° 6404-15 du 29 ramadan 1436 |
| RCAIM | Dokar Sadarwar Rediyon Australiya, mai dacewa da: EN 61000-6-4; Fitar masana'antu |
(1) Duba hanyar haɗin Takaddar Samfur a rok.auto/certifications don Sanarwa na Daidaitawa, Takaddun shaida, da sauran bayanan takaddun shaida.
Hoto 1 - Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙira na 1794-IB16XOB16P
Wurin da ke cikin lanƙwan yana wakiltar amintaccen kewayon aiki don ƙirar a ƙarƙashin yanayi daban-daban na mai amfani da aka kawo DC wadata voltages da yanayin yanayin yanayi. = Duk wuraren hawa (gami da na yau da kullun a kwance, tsaye, jujjuyawar kwance) kewayon aiki mai aminci
Tallafin Automation na Rockwell
Yi amfani da waɗannan albarkatun don samun damar bayanan tallafi.
| Na fasaha Taimako Cibiyar | Nemo taimako tare da yadda ake yin bidiyo, FAQs, taɗi, taron masu amfani, da sabunta sanarwar samfur. | rok.auto/support |
| Tushen ilimi | Samun damar labarai na tushen Ilimi. | rok.auto/knowledgebase |
| Fasaha na cikin gida Taimako Waya Lambobi | Nemo lambar tarho don ƙasar ku. | rok.auto/phonesupport |
| Adabi Laburare | Nemo umarnin shigarwa, littattafai, ƙasidu, da wallafe-wallafen bayanan fasaha. | rok.auto/literature |
| Samfura Daidaituwa kuma Zazzagewa Cibiyar (PCDC) | Zazzage firmware, hade files (kamar AOP, EDS, da DTM), da samun damar bayanin bayanan sakin samfur. | rok.auto/pcdc |
Bayanin Takardu
Bayanin ku yana taimaka mana samar da buƙatun takaddun ku mafi kyau. Idan kuna da wasu shawarwari kan yadda ake inganta abubuwan mu, cika fom ɗin a rok.auto/docfeedback.
Waste Electric and Electronic Equipment (WEEE)
A ƙarshen rayuwa, ya kamata a tattara wannan kayan aiki daban daga duk wani sharar gida da ba a ware ba. Rockwell Automation yana kiyaye bayanan yarda da muhalli na yanzu akan sa websaiti a rok.auto/pec.
Allen-Bradley, faɗaɗa yuwuwar ɗan adam, FactoryTalk, FLEX, Rockwell Automation, da TechConnect alamun kasuwanci ne na Rockwell Automation, Inc. Alamomin kasuwanci waɗanda ba na Rockwell Automation mallakin kamfanoninsu ne. Buga 1794-IN083E-EN-P - Yuli 2022 | Supersedes Publication 1794-IN083D-EN-P - Yuli 2018 Haƙƙin mallaka © 2022 Rockwell Automation, Inc. Duk haƙƙin mallaka.
Takardu / Albarkatu
 |
Allen-Bradley 1794-IB10XOB6 FLEX I/O Digital Input/Module Output [pdf] Jagoran Jagora 1794-IB10XOB6 FLEX IO Digital Input Output Module, 1794-IB10XOB6, FLEX IO Digital Input Output Module |
