Allen-Bradley 1794-IB10XOB6 FLEX I/O Digital Input/Output Module
FLEX I/O Digital Input le Output Modules
Lethathamo la linomoro 1794-IB10XOB6, 1794-IB16XOB16P
| Sehlooho | Leqephe |
| Kakaretso ea Liphetoho | 1 |
| Fetileview | 5 |
| Kenya Digital Input/Output Module | 5 |
| Lokisa Module oa Hao | 8 |
| Litlhaloso | 9 |
Kakaretso ea Liphetoho
Khatiso ena e na le lintlha tse latelang tse ncha kapa tse nchafalitsoeng. Lenane lena le kenyelletsa lintlafatso tsa bohlokoa feela 'me ha le reretsoe ho hlahisa liphetoho tsohle.
| Sehlooho | Leqephe |
| Nchafatso e ntlafalitsoeng | hohle |
| Kamohelo ea Sebaka se Kotsi UK le Europe | 4 |
| Maemo a Khethehileng a ntlafalitsoeng bakeng sa Tšebeliso e Bolokehileng | 4 |
| Kamohelo ea Sebaka se Kotsi sa IEC e ntlafalitsoeng | 4 |
| Litlhaloso tsa Kakaretso tse ntlafalitsoeng | 10 |
| Litlhaloso tse Nchafalitsoeng tsa Tikoloho | 10 |
| Litifikeiti tse ntlafalitsoeng | 11 |
HLOKOMELA: Bala tokomane ena le litokomane tse thathamisitsoeng karolong ea Mehloli ea Tlatsetso mabapi le ho kenya, ho hlophisoa le ho sebetsa ha thepa ena pele o kenya, o lokisa, o sebelisa kapa o hlokomela sehlahisoa sena. Basebelisi ba kopuoa ho itloaetsa litaelo tsa ho kenya le ho kenya likhoele ho kenyelletsa litlhoko tsa likhoutu tsohle tse sebetsang, melao le litekanyetso. Mesebetsi e kenyeletsang ho kenya, ho lokisa, ho kenya ts'ebetsong, ts'ebeliso, kopano, ho qhaqhoa le tlhokomelo li hlokoa hore li etsoe ke basebetsi ba koetlisitsoeng ka mokhoa o nepahetseng ho latela melao ea ts'ebetso e sebetsang. Haeba sesebelisoa sena se sebelisoa ka tsela e sa boleloang ke moetsi, tšireletso e fanoeng ke thepa e ka senyeha
Tikoloho le Sebaka
HLOKOMELA: Thepa ena e reretsoe ho sebelisoa tikolohong ea indasteri ea Pollution Degree 2, ka overvoltagLisebelisoa tsa Sehlopha sa II (joalo ka ha ho hlalositsoe ho EN/IEC
60664-1), bophahamong ba ho fihla ho 2000 m (6562 ft) ntle le ho nyenyefatsa. Thepa ena ha ea rereloa ho sebelisoa libakeng tsa bolulo 'me e ka 'na ea se ke ea fana ka tšireletso e lekaneng litšebeletsong tsa puisano tsa seea-le-moea libakeng tse joalo. Thepa ena e fanoa e le lisebelisoa tsa mofuta o bulehileng bakeng sa tšebeliso ea kahare. E tlameha ho kenngoa ka har'a sebaka se kampetsoeng se etselitsoeng hantle maemo a itseng a tikoloho a tla be a le teng le a etselitsoeng ka nepo ho thibela kotsi ea motho ka lebaka la ho fumaneha ha likarolo tsa bophelo. Sebaka se koaletsoeng se tlameha ho ba le thepa e thibelang malakabe e loketseng ho thibela kapa ho fokotsa ho ata ha lelakabe, ho latela tekanyetso ea ho ata ha lelakabe la 5V A kapa ho amoheloa bakeng sa
kopo haeba e se metallic. Bokahare ba sebaka se koaletsoeng bo tlameha ho fumaneha feela ka tšebeliso ea sesebelisoa. Likarolo tse latelang tsa khatiso ena li ka ba le lintlha tse ling mabapi le lintlha tsa mofuta oa sebaka se koaletsoeng tse hlokoang ho tsamaisana le litifikeiti tse itseng tsa polokeho ea sehlahisoa. Ho phaella khatisong ena, sheba tse latelang:
- Industrial Automation Wiring and Grounding Guidelines, sengoliloeng 1770-4.1, bakeng sa litlhoko tse ling tsa ho kenya.
- NEMA Standard 250 le EN/IEC 60529, ha e sebetsa, bakeng sa litlhaloso tsa likhato tsa ts'ireletso tse fanoeng ke libaka tse koetsoeng.
HLOKOMELA: Bala tokomane ena le litokomane tse thathamisitsoeng karolong ea Mehloli ea Tlatsetso mabapi le ho kenya, ho hlophisoa, le ts'ebetso ea sesebelisoa sena pele u kenya, ho lokisa, ho sebelisa kapa ho hlokomela sehlahisoa sena. Basebelisi ba kopuoa ho itloaetsa litaelo tsa ho kenya le ho kenya likhoele ho kenyelletsa litlhoko tsa likhoutu tsohle tse sebetsang, melao le litekanyetso. Ho kenya, ho lokisa, ho kenya ts'ebetsong, ts'ebeliso, kopano, ho qhaqhoa le ho lokisa li tlameha ho etsoa ke basebetsi ba koetlisitsoeng ka mokhoa o nepahetseng ho latela melao ea ts'ebetso e sebetsang. Haeba ho sa sebetse hantle kapa ho senyehile, ha ho na liteko tsa ho lokisa tse lokelang ho etsoa. Mojule o lokela ho khutlisetsoa ho moetsi hore a lokisoe. U se ke ua qhaqha module.
Thibela ho tsoa ha Electrostatic
HLOKOMELA: Sesebelisoa sena se na le maikutlo a ho tsoa ha electrostatic, e ka bakang tšenyo e ka hare le ho ama ts'ebetso e tloaelehileng. Latela litataiso tsena ha u sebetsana le thepa ena:
- Thetsa ntho e theohileng ho tima ntho e ka bang teng.
- Apara lesela la letsoho le lumelitsoeng fatše.
- Se ke oa ama lihokelo kapa lithakhisa maboteng a likarolo.
- U se ke ua ama likarolo tsa potoloho ka har'a thepa.
- Sebelisa sebaka sa ho sebetsa sa static-safe, haeba se le teng.
- Boloka thepa ka har'a sephutheloana se loketseng se sa sebetseng ha se sa sebelisoe.
Maemo a Khethehileng a Tšebeliso e Sireletsehileng
HLOKOMELA:
- Sehlahisoa sena se thehiloe ka terene ea DIN ho ea sebakeng sa chassis. Sebelisa seporo sa tšepe sa DIN se nang le zinc plated chromate-passivated steel ho netefatsa ho theoa ho nepahetseng. Tšebeliso ea
lisebelisoa tse ling tsa seporo sa DIN (mohlalaample, aluminium kapa polasetiki) tse ka senyang, tsa oxidize, kapa li-conductor tse futsanehileng, li ka fella ka ho theoha ho sa lokelang kapa ka nakoana.
Sireletsa seporo sa DIN ho ea holim'a metsi hoo e ka bang limilimithara tse ling le tse ling tse 200 (7.8 in.) 'me u sebelise li-ankora ka nepo. Etsa bonnete ba hore u theola seporo sa DIN hantle. Sheba
Industrial Automation Wiring and Grounding Guidelines, sengoliloeng 1770-4.1, bakeng sa boitsebiso bo eketsehileng. - Se ke oa tlosa kapa oa tlosa yuniti ea motheo ea terminal ha motlakase o ntse o sebelisoa. Ho sitisoa ha sefofane se ka morao ho ka fella ka ts'ebetso e sa reroang kapa motsamao oa mochini.
- Se ke oa tlosa kapa oa nkela Adapter Module sebaka ha motlakase o ntse o sebelisoa. Ho sitisoa ha sefofane se ka morao ho ka fella ka ts'ebetso e sa reroang kapa motsamao oa mochini.
- Haeba sesebelisoa sena se sebelisoa ka mokhoa o sa hlalosoang ke moetsi, ts'ireletso e fanoang ke sesebelisoa e ka senyeha.
TLHOKOMELISO:
- Ha o kenya kapa o tlosa mojule ha motlakase oa backplane o ntse o butse, ho ka ba le arc ea motlakase. Sena se ka etsa hore ho be le ho phatloha ho hoholo ha lisebelisoa tsa sebaka se kotsi.
Etsa bonnete ba hore motlakase o tlositsoe kapa sebaka ha se kotsi pele o tsoela pele. Ho pheta-pheta arcing ea motlakase ho baka ho roala ho feteletseng ho mabitso ho module ka bobeli
le sehokedi sa yona sa ho nyalana. Mabitso a tsofetseng a ka baka ho hanyetsa motlakase ho ka amang ts'ebetso ea module. - Haeba o kenya kapa o tlosa mojule ha matla a backplane a ntse a bulehile, ho ka hlaha arc ea motlakase. Sena se ka etsa hore ho be le ho phatloha ho hoholo ha lisebelisoa tsa sebaka se kotsi. Eba
etsa bonnete ba hore motlakase o tlositsoe kapa sebaka ha se kotsi pele se tsoela pele. - Ha e sebelisoa Sehlopheng sa I, Karolong ea 2, sebakeng se kotsi, thepa ena e tlameha ho kenngoa ka har'a sebaka se loketseng ka mokhoa o nepahetseng oa wiring o lumellanang le
e laolang likhoutu tsa motlakase
TLHOKOMELO: Haeba o hokela kapa o hakolla mohala ha motlakase o le ka lehlakoreng la lebala o ntse o butse, ho ka ba le arc ea motlakase. Sena se ka baka ho phatloha sebakeng se kotsi
meaho. Etsa bonnete ba hore motlakase o tlositsoe kapa sebaka ha se kotsi pele o tsoela pele.
Mehopolo ea Tšireletso ea Motlakase
HLOKOMELA:
- Thepa ena e netefalitsoe hore e sebelisoe feela ka har'a mocheso oa moea o potolohileng -20…55 °C (-4…131 °F). Thepa ha ea lokela ho sebelisoa ka ntle ho sena
mefuta-futa. - Sebelisa feela lesela le bonolo le omeletseng la anti-static ho hlakola lisebelisoa. U se ke ua sebelisa lisebelisoa leha e le life tsa ho hloekisa.
Kamohelo ea Sebaka se Kotsi UK le Europe
Mojule o latelang ke European Zone 2 e amohetsoeng: 1794-IB10XOB6.
Lintlha tse latelang li sebetsa ho lihlahisoa tse tšoailoeng II 3 G:
- Ke Sehlopha sa II sa Thepa, Sehlopha sa 3 sa Thepa, 'me se lumellana le Litlhoko tsa Bohlokoa tsa Bophelo bo Botle le Tšireletseho tse amanang le moralo le kaho ea thepa e joalo e fanoeng ho Schedule 1 ea UKEX le Annex II ea EU Directive 2014/34/EU. Sheba UKEx le EU Declaration of Conformity ho rok.auto/certifications bakeng sa lintlha.
- Mofuta oa ts'ireletso ke Ex ec IIC T3 Gc ho latela EN IEC 60079-0: 2018, LITLHAKISO TSA LITŠOANTŠISO TSA LITŠOANTŠISO - KAROLO EA 0: LITLHAKISO - LITLHAKISO TSE KAKARETSO, Letsatsi la Phatlalatso 07/2018 le EN IEC 60079-7: 2015+1A sepakapaka. Tšireletso ea lisebelisoa ka ho eketseha ha tšireletso "e".
- Ikamahanya le Maemo a EN IEC 60079-0: 2018, LITŠOANTŠISO TSE PHAHLOKANG - KAROLO EA 0: SEHLOOHO - LITLHAKISO TSE KAKARETSO, Letsatsi la Phatlalatso 07/2018, EN IEC 60079-7:2015+A1:2018 Meea e phatlohang. Tšireletso ea lisebelisoa ka ho eketseha ha tšireletso "e", nomoro ea setifikeiti sa boitsebiso DEMKO 14 ATEX 1342501X le UL22UKEX2378X.
- E reretsoe ho sebelisoa libakeng tseo ho tsona ho phatloha ho bakoang ke likhase, mouoane, moholi, kapa moea ho ke keng ha etsahala hore li etsahale, kapa ho ka etsahalang hore li etsahale ka seoelo le ka nako e khutšoane feela. Libaka tse joalo li lumellana le lihlopha tsa Zone 2 ho latela UKEX regulation 2016 No. 1107 le ATEX Directive 2014/34/EU.
TEMOSO: Maemo a Khethehileng a Tšebeliso e Bolokehileng
- Sesebelisoa sena ha se hanyetsane le khanya ea letsatsi kapa mehloli e meng ea mahlaseli a UV.
- Thepa ena e tla beoa sebakeng se tiisitsoeng sa UKEX/ATEX/IECEx Zone 2 se nang le tekanyo e tlase ea tšireletso ea IP54 (ho latela EN/IEC 60079-0) mme e sebelisoe tikolohong e sa feteng Pollution Degree 2 (joalo ka e hlalositsoe ho EN/IEC 60664-1) ha e sebelisoa tikolohong ea Zone 2. Letlapa le tlameha ho fumaneha feela ka tšebeliso ea lisebelisoa.
- Sesebelisoa sena se tla sebelisoa ka har'a litekanyetso tse boletsoeng ke Rockwell Automation.
- Tšireletso ea nakoana e tla fanoa e behiloe boemong bo sa feteng 140% ea tlhōrō ea matla a phahameng.tage bohlokoa ho li-terminals tsa phepelo ho lisebelisoa.
- Thepa ena e tlameha ho sebelisoa feela le UKEX/ATEX/IECEx e netefalitsoeng ea Rockwell Automation backplanes.
- Sireletsa likhokahano life kapa life tsa kantle tse amanang le sesebelisoa sena ka ho sebelisa likurufu, lithapo tse thellang, likhokello tsa likhoele, kapa mekhoa e meng e fanoeng ka sehlahisoa sena.
- Se ke oa hakolla thepa ntle le haeba motlakase o tlositsoe kapa sebaka seo ho tsejoa hore ha se kotsi.
- Earthing e finyelloa ka ho kenya li-module holim'a terene.
Kamohelo ea Sebaka se Kotsi sa IEC
Lintlha tse latelang li sebetsa ho lihlahisoa tse tšoailoeng ka setifikeiti sa IECEx:
- E reretsoe ho sebelisoa libakeng tseo ho tsona ho phatloha ho bakoang ke likhase, mouoane, moholi, kapa moea ho ke keng ha etsahala hore li etsahale, kapa ho ka etsahala hore li etsahale ka seoelo le ka nako e khutšoane feela. Libaka tse joalo li lumellana le likarolo tsa Zone 2 ho IEC 60079-0.
- Mofuta oa tšireletso ke Ex ec IIC T3 Gc ho latela IEC 60079-0 le IEC 60079-7.
- Lumellana le Maemo a IEC 60079-0, Maemo a phatlohang Karolo ea 0: Lisebelisoa - Litlhokahalo tse akaretsang, Khatiso ea 7, Letsatsi la ntlafatso 2017, IEC 60079-7, 5.1, Maemo a phatlohang - Karolo ea 2017: Tšireletso ea lisebelisoa ka polokeho e eketsehileng "e" , nomoro ea setifikeiti sa IECEx ea IECEx UL 7X.
Tumello ea Sebaka se Kotsi sa Amerika Leboea
Li-module tsa 1794-IB10XOB6 le 1794-IB16XOB16P ke Sebaka se Kotsi se amohetsoeng.
| Lintlha tse latelang li sebetsa ha u sebelisa sesebelisoa sena ho libaka tse kotsi: | |
| Lihlahisoa tse tšoailoeng "CL I, DIV 2, GP A, B, C, D" li loketse ho sebelisoa ho Sehlopha sa I Division 2 Lihlopha A, B, C, D, Libaka tse Kotsi le libaka tse se nang kotsi feela. Sehlahisoa se seng le se seng se na le matšoao ho nameplate ea lintlha tse bontšang khoutu ea mocheso ea sebaka se kotsi. Ha o kopanya lihlahisoa ka har'a sistimi, khoutu ea mocheso e mpe ka ho fetesisa (nomoro e tlase "T") e ka sebelisoa ho thusa ho fumana khoutu e akaretsang ea mocheso oa sistimi. Metsoako ea lisebelisoa tsamaisong ea hau e itšetlehile ka lipatlisiso tsa Bolaoli ba lehae bo Nang le Taolo ka nako eo
ea ho kenya. |
|
| TLHOKOMELISO:
Ho phatloha Kotsi – • Se ke oa hakolla thepa ntle le haeba motlakase o tlositsoe kapa sebaka seo ho tsejoa hore ha se kotsi. • Se ke oa hakolla likhokahano tsa thepa ena ntle le haeba motlakase o tlositsoe kapa sebaka seo ho tsejoa hore ha se kotsi. Sireletsa likhokahano life kapa life tsa kantle tse amanang le sesebelisoa sena ka ho sebelisa likurufu, lithapo tse thellang, likhokello tsa likhoele, kapa mekhoa e meng e fanoeng ka sehlahisoa sena. • Phapanyetsano ea likarolo e ka 'na ea sitisa ho nepahala ha Sehlopha sa I, Karolo ea 2. |
|
Fetileview
| Tlhaloso | Tlhaloso | ||
| 1 | Keyswitch | 5 | Sebaka sa ho tsamaisana |
| 2 | Sethala sa setsi | 6 | Groove |
| 3 | Sehokelo sa Flexbus | 7 | Latching mochine |
| 4 | Mojule |
Kenya Digital Input/Output Module
Mojule oa FLEX™ I/O 1794-IB10XOB6 o hloella motheong oa 1794-TB3 kapa 1794-TB3S. Mojule oa 1794-IB16XOB16P o hloella motheong oa 1794-TB32 kapa 1794-TB32S.
TLHOKOMELO: Nakong ea ho kenya lisebelisoa tsohle, etsa bonnete ba hore litšila tsohle (lits'oants'o tsa tšepe, likhoele tsa terata, joalo-joalo) li bolokoa hore li se ke tsa oela mojuleng. Litšila tse oelang ka har'a mojule li ka baka tšenyo ha motlakase o phahama.
- Fetolela keyswitch (1) botlaaseng ba terminal (2) ho ea ho oache ho ea sebakeng sa 2 joalo ka ha ho hlokahala bakeng sa mojule oa mofuta ona.
- Netefatsa hore sehokelo sa Flexbus (3) se sutumetsoa ho ea ka letsohong le letšehali hore se hokahane le setsi/adapter ea boahelani. Ha o khone ho kenya module ntle le haeba sehokelo se atolositsoe ka botlalo.
- Etsa bonnete ba hore lithakhisa tse ka tlase ho mojule li otlolohile e le hore li ikamahanye hantle le sehokelo setsing sa terminal.
- Beha module (4) le bar ea eona ea tekano (5) e tsamaellanang le groove (6) setsing sa terminal.
- Tobetsa ka thata le ka ho lekana ho dudisa mojule kahara yuniti ya theminale. Mojule o lutse ha mochini oa latching (7) o notletsoe mojulung.
Connect Wiring bakeng sa 1794-IB10XOB6
- Hokela likhoele tsa motho ka mong le tse tsoang ho li-terminals tse nang le linomoro ho 0…15 mola (A) joalo ka ha ho boletsoe ho Lethathamo la 1.
- Hokela motlakase o amanang le +V DC oa sesebelisoa sa ho kenya ho theminale e tsamaellanang le 34…51 mola (C) bakeng sa kenyeletso ka 'ngoe joalokaha ho bontšitsoe ho Lethathamo la 1. (Litheminale tsa +V tsa matla a mola (C) li hokahane ka hare ho tsona. )
- Hokela sesebediswa sa ho kenya se amahanngwang le se tlwaelehileng (disebediswa tsa terata tse 3 feela) le sesebediswa sa tlhahiso se tlwaelehileng ho ditheminale tse tsamaellanang mothalong wa 16...33. (B) bakeng sa tlhahiso le tlhahiso e 'ngoe le e 'ngoe joalo ka ha ho bonts'itsoe ho Lethathamo la 1. (Tse tloaelehileng li hokahane ka hare.)
- Hokela +V DC matla ho terminal 34 ho 34…51 row (C).
- Hokela V DC e tloaelehileng ho terminal 16 ho 16…33 row (B).
- Haeba matla a daisychaining ho terminal e latelang, hokela jumper ho tloha terminal 51 (+V DC) yuniting ena ho ea ho theminale ea 34 ho yuniti ea motheo e latelang.
- Haeba DC e tsoela pele ho ea setsing se latelang, hokela jumper ho tloha terminal 33 (e tloaelehileng) ho yuniti ena ea motheo ho ea ho terminal 16 ho yuniti e latelang ea motheo.
Lihokelo tsa Wiring bakeng sa 1794-IB10XOB6
| Kenyeletso(1) | Letshwao | Kgutla | Phepelo |
Sekela kenya letsoho
| Keletso 0 | A-0 | B-17 | C-35 |
| Keletso 1 | A-1 | B-18 | C-36 |
| Keletso 2 | A-2 | B-19 | C-37 |
| Keletso 3 | A-3 | B-20 | C-38 |
| Keletso 4 | A-4 | B-21 | C-39 |
| Keletso 5 | A-5 | B-22 | C-40 |
| Keletso 6 | A-6 | B-23 | C-41 |
| Keletso 7 | A-7 | B-24 | C-42 |
| Keletso 8 | A-8 | B-25 | C-43 |
| Kenyeletso(1) | Letshwao | Kgutla | Phepelo |
| Keletso 9 | A-9 | B-26 | C-44 |
Mohloli tlhahiso
| Sephetho sa 0 | A-10 | B-27 | – |
| Sephetho sa 1 | A-11 | B-28 | – |
| Sephetho sa 2 | A-12 | B-29 | – |
| Sephetho sa 3 | A-13 | B-30 | – |
| Sephetho sa 4 | A-14 | B-31 | – |
| Sephetho sa 5 | A-15 | B-32 | – |
| +V DC | C-34 ho ea ho C-51 (e hokahane ka hare) | ||
| Tloaelehileng | B-16 ho ea ho B-33 (e hokahane ka hare) | ||
Lisebelisoa tsa ho kenya terata tse 2 li sebelisa liteishene tsa matšoao le phepelo; Lisebelisoa tsa terata tse 3 li sebelisa mats'oao, ho khutlisa le ho fana ka thepa
1794-TB3 le 1794-TB3S Terminal Base Wiring bakeng sa 1794-IB10XOB6
2 le 3-Wire Input Wiring bakeng sa 1794-IB10XOB6
Connect Wiring bakeng sa 1794-IB16XOB16P
- Hokela likhoele tsa motho ka mong (IN0 ho IN15) ho litheminale tse nang le linomoro moleng oa 0…15 mola (A) joalo ka ha ho boletsoe ho Lethathamo la 2 leqepheng la 7.
- Hokela matla a amanang le boemelo ba +V1 (35, 37, 39 kapa 41) ho 34…51 mola (C) joalokaha ho bontšitsoe ho Lethathamo la 2 leqepheng la 7.
- Hokela tse tloaelehileng tse amanang le tsona (-V1) bakeng sa IN0 ho isa ho IN15 ho COM1 (terminal 36, 38, 40 kapa 42) ho 34…51 mola (C).
- Hokela lithapo tsa motho ka mong (OUT0 ho OUT15) ho litheminale tsa 17 ho isa ho 32 moleng oa 16…33 (B) joalo ka ha ho boletsoe ho Lethathamo la 2 leqepheng la 7. (Hlokomela: Se ke oa hokela litheminale tsa 16 kapa 33.)
- Hokela matla a amanang le boemelo ba +V2 (43, 45, 47 kapa 49) ho 34…51 mola (C) joalokaha ho bontšitsoe ho Lethathamo la 2 leqepheng la 7.
- Hokela tse tloaelehileng tse amanang le tsona (-V2) bakeng sa OUT0 ho ea ho OUT15 ho COM2 (terminal 44, 46, 48 kapa 50) ho 34…51 mola (C).
- Haeba u tsoela pele ho kenya lithapo ho yuniti ea motheo ea terminal e latelang, hokela jumper ho tloha ho theminale 41(+V1) ho ea ho theminale ea motlakase yuniting e latelang ea motheo; hokela jumper ho tloha ho terminal 42 (COM1) ho ea ho terminal e tloaelehileng ho yuniti e latelang ea motheo.
- Haeba u tsoela pele ho sebelisa lithapo tsa motlakase ho theminale e latelang ea motheo, hokela jumper ho tloha ho theminale ea 49 (+V2) ho ea ho theminale ea motlakase yuniting e latelang ea motheo; hokela jumper ho tloha terminal 50 (COM2) ho terminal e tloaelehileng ho yuniti e latelang ea motheo.
Lihokelo tsa Wiring bakeng sa 1794-IB16XOB16P
| Kenyeletso | Letshwao | Kgutla | Phepelo(1) |
| Keletso 0 | A-0 |
V1 Khutla e hokahantsoeng le li-terminals 36, 38, 40, le 42 |
+ V1 e hokahaneng le li-terminals 35, 37, 39, le 41 |
| Keletso 1 | A-1 | ||
| Keletso 2 | A-2 | ||
| Keletso 3 | A-3 | ||
| Keletso 4 | A-4 | ||
| Keletso 5 | A-5 | ||
| Keletso 6 | A-6 | ||
| Keletso 7 | A-7 | ||
| Keletso 8 | A-8 | ||
| Keletso 9 | A-9 | ||
| Keletso 10 | A-10 | ||
| Keletso 11 | A-11 | ||
| Keletso 12 | A-12 | ||
| Keletso 13 | A-13 | ||
| Keletso 14 | A-14 | ||
| Keletso 15 | A-15 | ||
| Sephetho sa 0 | B-17 |
V2 Khutla e hokahantsoeng le li-terminals 44, 46, 48, le 50 |
+ V2 e hokahaneng le li-terminals 43, 45, 47, le 49 |
| Sephetho sa 1 | B-18 | ||
| Sephetho sa 2 | B-19 | ||
| Sephetho sa 3 | B-20 | ||
| Sephetho sa 4 | B-21 | ||
| Sephetho sa 5 | B-22 | ||
| Sephetho sa 6 | B-23 | ||
| Sephetho sa 7 | B-24 | ||
| Sephetho sa 8 | B-25 | ||
| Sephetho sa 9 | B-26 | ||
| Sephetho sa 10 | B-27 | ||
| Sephetho sa 11 | B-28 | ||
| Sephetho sa 12 | B-29 | ||
| Sephetho sa 13 | B-30 | ||
| Sephetho sa 14 | B-31 | ||
| Sephetho sa 15 | B-32 | ||
| +V1 matla a DC | Li-terminals tsa motlakase 35, 37, 39, le 41 | ||
| Com1 DC khutlela | Li-terminals tse tloaelehileng 36, 38, 40, le 42 | ||
| +V2 matla a DC | Li-terminals tsa motlakase 43, 45, 47, le 49 | ||
| Com2 DC khutlela | Li-terminals tse tloaelehileng 44, 46, 48, le 50 | ||
Lisebelisoa tsa ho kenya terata tse 2 li sebelisa liteishene tsa matšoao le phepelo; Lisebelisoa tsa terata tse 3 li sebelisa mats'oao, ho khutlisa le ho fana ka thepa
1794-TB32 Terminal Base Wiring bakeng sa 1794-IB16XOB16P
Lokisa Module oa Hao
U lokisa mojule oa hau ka ho seta likotoana tsa lentsoe la tlhophiso (lentsoe 3).
'Mapa oa memori oa Letlapa la Setšoantšo bakeng sa 1794-IB10XOB6 Module
| Dec | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| Oct | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| Bala 1 | Ha e sebelisoe | I9 | I8 | I7 | I6 | I5 | I4 | I3 | I2 | I1 | I0 | |||||
| Ngola 2 | Ha e sebelisoe | O5 | O4 | O3 | O2 | O1 | O0 | |||||||||
| Ngola 3 | Ha e sebelisoe | FT | Ha e sebelisoe | |||||||||||||
| Dec | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| Oct | 17 | 16 | 15 | 14 | 13 | 12 | 11 | 10 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
| Bala 1 | I15 | I14 | I13 | I12 | I11 | I10 | I9 | I8 | I7 | I6 | I5 | I4 | I3 | I2 | I1 | I0 |
| Ngola 2 | O15 | O14 | O13 | O12 | O11 | O10 | O9 | O8 | O7 | O6 | O5 | O4 | O3 | O2 | O1 | O0 |
| Ngola 3 | Ha e sebelisoe | Sesefa se kenyang FT 0…15 | ||||||||||||||
Beha Nako ea Sesefa sa Input
Ho seta nako ea filthara ea ho kenya, seta likotoana tse amanang le setšoantšo sa tlhahiso (lentsoe le tlatsanang) bakeng sa mojule.
Bakeng sa mohlalaample, ho eketsa nako ea filthara ea Off to On ho 8 ms bakeng sa lintho tsohle tse kenang atereseng ea 1, sehlopha sa mojule 0, lentsoeng la tlhophiso 3, beha likotoana joalo ka ha ho bonts'itsoe.
Nako ea Sefe ea Kena
| Bits(1) | Tlhaloso | |||
| 02 | 01 | 00 | Sefe Nako ea ho Kenya Lintho | Tlohela ho Bula/Bula ho E tima |
| 10 | 09 | 03 | ||
| 0 | 0 | 0 | Nako ea ho sefa 0 | 0.25 ms |
| 0 | 0 | 1 | Nako ea ho sefa 1 | 0.5 ms |
| 0 | 1 | 0 | Nako ea ho sefa 2 | 1.0 ms |
| 0 | 1 | 1 | Nako ea ho sefa 3 | 2.0 ms |
| 1 | 0 | 0 | Nako ea ho sefa 4 | 4.0 ms |
| 1 | 0 | 1 | Nako ea ho sefa 5 | 8.0 ms |
| 1 | 1 | 0 | Nako ea ho sefa 6 | 16.0 ms |
| 1 | 1 | 1 | Nako ea ho sefa 7 | 32.0 ms |
Litlhaloso
| Tšobotsi | 1794-IB10XOB6 | 1794-IB16XOB16P |
| Palo ea lintho tse kenang, hona joale, ho teba | 10 | 16 |
| Palo ea liphetho, hajoale, ho fumana | 6 | 16 |
| Teminara e khothaletsoang | 1794-TB2, 1794-TB3,1794-TB3S, 1794-TB3K, 1794-TB3SK, 1794-TBKD, 1794-TB37DS | 1794-TB32, 1794-TB32S, 1794-TB62DS, 1794-TB62EXD4X15 |
| Boemong ba naha voltage, kenya Min
Nom Max |
10V DC
24V DC 31.2V DC |
|
| Boemong ba hajoale, kenya Min
Nom Max |
2.0 mA
8.0 mA @ 24V DC 11.0 mA |
2.0 mA
8.8 mA @ 24V DC 12.1 mA |
| Off-state voltage, kenya, max | 5V DC | |
| Off-state current, input, max | 1.5 mA | |
| Impedans ea ho kenya ka lebitso | 4.8 lik'hilograma | 2.5 lik'hilograma |
| Nako ea ho kenya filthara(1) Tlohela ho On
Tsoela Pele |
||
| Boemong ba naha voltage range, tlhahiso Min
Nom Max |
10V DC 24V DC 31.2V DC (sheba Setšoantšo sa 1 leqepheng la 11) |
|
| Boemong ba hajoale, tlhahiso Min, ka kanale
Nom, ka kanale Max, ka mojule |
1.0 mA
2.0A10A |
1.0 mA
0.5A8A |
| Off-state voltage, tlhahiso, max | 31.2V DC | |
| Lintlha tse hlahisoang hona joale ka tlhahiso
ka mojule, max |
2 A
10 A |
0.5A8A |
| Ho phahama hona joale | 4 A bakeng sa 50 ms, e phetoa ka metsotsoana e meng le e meng e 'meli | 1.5 A bakeng sa 50 ms, e phetoa ka metsotsoana e meng le e meng e 'meli |
| Off-state leakage current, max | 0.5 mA | |
| Boemong ba naha voltage theoha, max | 1V DC @ 2A
0.5V DC @ 1 A |
0.5V DC @ 1 A |
| Ho lieha ha lets'oao la tlhahiso, max(2) Tlohela ho On
Tsoela Pele |
0.5 ms 1.0 ms |
|
| Ho itšehla thajana voltage | 50V (e tsoelang pele), Mofuta oa Motheo oa Insulation
Mofuta o lekiloeng @ 1250V AC bakeng sa 60 s, pakeng tsa lehlakore la tšimo le tsamaiso Ha ho khethollo pakeng tsa liteishene tse ikemetseng |
50V (e tsoelang pele), Mofuta oa Motheo oa Insulation
E lekoa @ 2121V DC bakeng sa 1 s, sistimi ho ea ho I/O le lintho tse kenang ho tse hlahisoang Ha ho khethollo lipakeng tsa liteishene ka bomong. |
| Flexbus ea hona joale | 50 mA | 80 mA |
| Ho felloa ke matla, max | 6.0 W @ 31.2V DC | 7.0 W @ 31.2V DC |
| Thermal dissipation, max | 20.3 BTU/hora @ 31.2V DC | 23.9 BTU/hora @ 31.2V DC |
| Ho qhekella | Liphetho tsa module ha li kopane. Fusing e khothaletsoa. Haeba fusing e lakatseha, o tlameha ho fana ka fusing ea kantle. Sebelisa li-fuse tsa SAN-O MQ4-3A kapa Littelfuse 235-003. | Lihlahisoa li sirelelitsoe ka mokhoa oa elektronike |
- Nako ea filtara ea Input Off to On On ke nako ho tloha ho lets'oao le nepahetseng la ho kenya ho isa ho lemohule le mojule. Nako ea filthara ea Input On to Off ke nako ho tloha ha lets'oao la ho kenya le theohela ka tlase ho boemo bo nepahetseng ho isa ho lemohuoa mojuleng.
- Ho lieha ha Output Off to On or On to Off ke nako eo mojule o fanang ka eona o bulela kapa o tima ho fihlela tlhahiso e buleha kapa e tima.
Litlhaloso Kakaretso
| Tšobotsi | 1794-IB10XOB6 | 1794-IB16XOB16P |
| Terminal base screw torque | E khethoa ke li-terminal base tse kentsoeng | |
| Litekanyo, hoo e ka bang. (H x W x D) | 94 x 94 x 69 mm (3.7 x 3.7 x 2.7 in.) | |
| Lits'oants'o tsa ho kenya (lehlakore la lebala) | 10 matšoao a boemo bo mosehla | 16 matšoao a boemo bo mosehla |
| Lipontšo tsa Output (lehlakore la lebala) | 6 matšoao a boemo bo mosehla | |
| Matla a kantle a DC matlatage fapaneng | 10…31.2V DC (e kenyelletsa 5% AC ripple) | |
|
Sebaka sa hajoale sa phepelo ea motlakase ea kantle ho DC |
8 m A @ 10V DC
15 mA @ 19.2V DC 19 mA @ 24V DC 25 mA @ 31.2V DC |
78 mA @ 10V DC |
| Khoutu ea mocheso ea Amerika Leboea | T3C | |
| IECEx khoutu ea mocheso | T3 | – |
| UKEX/ATEX khoutu ea mocheso | T3 | |
| Keyswitch boemo | 2 | |
| Reiti ea mofuta oa sebaka | Ha ho letho (mokhoa o bulehileng) | |
| Boima ba 'mele, hoo e ka bang. | 85 g (3.00 oz) | 98 g (3.46 oz) |
| Boholo ba terata | E khethoa ke li-terminal base tse kentsoeng | |
| Sehlopha sa lithapo(1) | 2 - likoung tsa matšoao | |
(1) Sebelisa tlhahisoleseding ena ea Sehlopha sa Conductor bakeng sa ho rera litsela tsa conductor joalokaha ho hlalositsoe Bukeng e nepahetseng ea Tsamaiso ea Boemo ba Tsamaiso. Hape bona Industrial Automation Wiring and Grounding Guidelines, sengoliloeng 1770-4.1, bakeng sa boitsebiso bo eketsehileng.
Litlhaloso tsa Tikoloho
| Tšobotsi | 1794-IB10XOB6 | 1794-IB16XOB16P |
|
Mocheso oa ho sebetsa |
IEC 60068-2-1 (Papatso ea Teko, e sebetsang e batang),
IEC 60068-2-2 (Teko ea Bd, e sebetsang mocheso o omileng), IEC 60068-2-14 (Teko ea Nb, ts'isinyeho ea mocheso e sebetsang): |
|
| -20…+55 °C (-4…+131 °F) | 0…55 °C (32…131 °F) | |
|
Mocheso oa polokelo |
IEC 60068-2-1 (Teko ea Ab, serame se sa phuthetsoeng se sa sebetseng),
IEC 60068-2-2 (Teko ea Bb, mocheso o omileng o sa phuthetsoeng o sa sebetseng), IEC 60068-2-14 (Teko ea Na, e sa phuthetsoeng e sa sebetseng ea mocheso o sa sebetseng): -40…+85 °C (-40…+185 °F) |
|
| Mocheso, moea o potolohileng, max | 55 °C (131 °F) | |
| Mongobo o amanang | IEC 60068-2-30 (Teko ea Db, e sa pakelloang damp mocheso): 5…95% noncodensing | |
| Ho thothomela | IEC60068-2-6 (Teko Fc, ea sebetsa): 5 g @ 10…500 Hz | |
|
Ho tshoha |
IEC60068-2-27 (Teko Ea, ho tšoha ho sa phutheloe): E sebetsa 30 g
50 g ha e sebetse |
|
| Mesi | Tlhaloso: IEC 61000-6-4 | |
| Tšireletso ea ESD | IEC 61000-4-2:
Khokahano ea 6 kV e ntša moea oa 8 kV |
|
| Tšireletso ea mahlaseli a RF | IEC 61000-4-3:
10V/m le 1 kHz sine-wave 80% AM ho tloha ho 80…6000 MHz |
|
| Tšireletso ea EFT / B | IEC 61000-4-4:
± 3 kV @ 5 kHz boemakepeng ba motlakase ± 2 kV @ 5 kHz likoung tsa matšoao |
IEC 61000-4-4:
± 2 kV @ 5 kHz boemakepeng ba motlakase ± 2 kV @ 5 kHz likoung tsa matšoao |
| Ho itšireletsa mafung ka nakoana | IEC 61000-4-5:
± 1 kV line-line(DM) le ±2 kV line-earth(CM) likoung tsa matšoao |
|
| Ho tsamaisoa ha RF ho itšireletsa mafung | IEC 61000-4-6:
10V rms e nang le 1 kHz sine-wave 80% AM ho tloha ho 150 kHz…80 MHz |
|
Setifikeiti
| Setifikeiti
(Neng Sehlahisoa Is E tšoailoe)(1) |
Boleng |
|
c-UL-rona |
(1794-IB10XOB6 feela)
Thepa ea UL e thathamisitsoeng ea Taolo ea Indasteri, e netefalitsoeng bakeng sa US le Canada. Sheba UL File E65584. UL E thathamisitsoe bakeng sa Sehlopha sa I, Sehlopha sa 2 Sehlopha sa A,B,C,D Libaka tse Kotsi, se netefalitsoeng bakeng sa US le Canada. Sheba UL File E194810. (1794-IB16XOB16P feela) Thepa ea UL e thathamisitsoeng ea Taolo ea Indasteri, e netefalitsoeng bakeng sa US le Canada. Sheba UL File E322657. UL E thathamisitsoe bakeng sa Sehlopha sa I, Sehlopha sa 2 Sehlopha sa A,B,C,D Libaka tse Kotsi, se netefalitsoeng bakeng sa US le Canada. Sheba UL File E334470. |
|
UK le CE |
UK Statutory Instrument 2016 No. 1091 le European Union 2014/30/EU EMC Directive, e lumellanang le: EN 61326-1; Meas./Control/Lab., Litlhoko tsa indasteri
EN 61000-6-2; Indasteri Immunity EN 61131-2; Balaoli ba Lenaneo EN 61000-6-4; Mesi ea Liindasteri UK Statutory Instrument 2012 No. 3032 le European Union 2011/65/EU RoHS, e lumellanang le: EN 63000; Litokomane tsa tekheniki |
|
Ex |
UK Statutory Instrument 2016 No. 1107 le European Union 2014/34/EU ATEX Directive, e lumellanang le: EN IEC 60079-0; Litlhoko tse akaretsang
EN IEC 60079-7; Sepakapaka se Phatlohileng, Tšireletso "e" II 3 G Ex ec IIC T3 Gc DEMKO 14 ATEX 1342501X UL22UKEX2378X |
| TÜV | (1794-IB10XOB6 feela)
TÜV E netefalitsoe bakeng sa Tšireletseho ea Mosebetsi: ho fihlela le ho kenyelletsa SIL 2 |
| KC | Ngodiso ya Korea ya Thepa ya Kgaso le Dikgokahanyo, e tsamaellanang le: Article 58-2 of Radio Waves Act, Clause 3 |
| EAC | Russia Customs Union TR CU 020/2011 EMC Technical Regulation |
|
IECEx |
Sistimi ea IECEx, e tsamaellanang le:
IEC 60079-0; Litlhoko tse akaretsang IEC 60079-7; Sepakapaka se Phatlohileng, Tšireletso "e" Ex ec IIC T3 Gc IECEx UL 14.0066X |
| CCC | CNCA-C23-01
CNCA-C23-01 CCC Kemiso ea ho Kemiso ea Molao oa ho Phahloha-Bopaki ba Lihlahisoa tsa Motlakase |
| Morocco | Arrêté ministériel n° 6404-15 du 29 ramadan 1436 |
| Katoloso ea RCM | Molao oa li-radiocommunications oa Australia, o tsamaellanang le: EN 61000-6-4; Mesi ea Liindasteri |
(1) Sheba sehokelo sa Setifikeiti sa Sehlahisoa ho rok.auto/certifications bakeng sa Phatlalatso ea Tumellano, Litifikeiti, le lintlha tse ling tsa setifikeiti.
Setšoantšo sa 1 - Derating Curve bakeng sa 1794-IB16XOB16P
Sebaka se ka har'a curve se emela sebaka se bolokehileng sa ts'ebetso bakeng sa mojule tlas'a maemo a fapaneng a phepelo ea DC e fanoeng ke mosebelisi.tages le mocheso oa tikoloho. = Maemo ohle a ho hlongoa (ho kenyeletsoa a rapameng a tloaelehileng, a emeng, a theohileng, a tšekaletseng) sebaka se sireletsehileng sa ts'ebetso
Rockwell Automation Support
Sebelisa lisebelisoa tsena ho fumana lintlha tsa tšehetso.
| Setsebi Tšehetso Setsi | Fumana thuso ea ho etsa livideo, Lipotso, puisano, liforamu tsa basebelisi, le lintlafatso tsa tsebiso mabapi le sehlahisoa. | rok.auto/support |
| Motheo oa tsebo | Fumana lingoloa tsa Knowledgebase. | rok.auto/knowledgebase |
| Sebaka sa Tekheniki Tšehetso Mohala Lipalo | Fumana nomoro ea mohala ea naha ea heno. | rok.auto/phonesupport |
| Lingoliloeng Laebrari | Fumana litaelo tsa ho kenya, libuka, libukana, le lingoliloeng tsa boitsebiso ba theknoloji. | rok.auto/literature |
| Sehlahisoa Ho lumellana le Khoasolla Setsi (PCDC) | Khoasolla firmware, e amanang files (joalo ka AOP, EDS, le DTM), le ho fihlella lintlha tsa tokollo ea sehlahisoa. | rok.auto/pcdc |
Documentation Feedback
Maikutlo a hau a re thusa ho fana ka litlhoko tsa litokomane tsa hau hamolemo. Haeba u na le litlhahiso mabapi le mokhoa oa ho ntlafatsa litaba tsa rona, tlatsa foromo ho rok.auto/docfeedback.
Thepa ea Matla a Motlakase le Elektronike (WEEE)
Qetellong ea bophelo, lisebelisoa tsena li lokela ho bokelloa ka thoko ho litšila tse sa hlophisoang tsa masepala. Rockwell Automation e boloka tlhaiso-leseling ea morao-rao ea tikoloho ea sehlahisoa ho eona website at rok.auto/pec.
Allen-Bradley, ho atolosa menyetla ea batho, FactoryTalk, FLEX, Rockwell Automation, le TechConnect ke matshwao a kgwebo a Rockwell Automation, Inc. Matshwao a kgwebo ao e seng a Rockwell Automation ke thepa ya dikhamphani tse fapaneng. Phatlalatso 1794-IN083E-EN-P - July 2022 | Supersedes Publication 1794-IN083D-EN-P – Phupu 2018 Copyright © 2022 Rockwell Automation, Inc. Litokelo tsohle li sirelelitsoe.
Litokomane / Lisebelisoa
 |
Allen-Bradley 1794-IB10XOB6 FLEX I/O Digital Input/Output Module [pdf] Buka ea Taelo 1794-IB10XOB6 FLEX IO Digital Input Module, 1794-IB10XOB6, FLEX IO Digital Input Module, Digital Input Module, Input Module |
