SENECA Z-8AI Analog Input ko Fitar Module
GARGADI NA FARKO
Kalmar WARNING da alamar ta gabata tana nuna yanayi ko ayyuka waɗanda ke jefa amincin mai amfani cikin haɗari. Kalmar ATTENTION da alamar ta rigaya tana nuna yanayi ko ayyuka waɗanda zasu iya lalata kayan aiki ko kayan haɗin gwiwa. Garanti zai zama marar amfani a yayin amfani mara kyau ko tampyin aiki tare da na'ura ko na'urorin da masana'anta suka bayar kamar yadda ya cancanta don aikin sa daidai, kuma idan ba a bi umarnin da ke cikin wannan jagorar ba.
- GARGADI: Dole ne a karanta cikakken abin da ke cikin littafin kafin kowane aiki. ƙwararrun masu wutar lantarki ne kawai za su yi amfani da tsarin.
- Akwai takamaiman takaddun ta amfani da QR-CODE da aka nuna a shafi na 1.
- Dole ne a gyara ƙirar kuma a maye gurbin ɓarna da Manufacturer.
- Samfurin yana kula da fitar da wutar lantarki. Ɗauki matakan da suka dace yayin kowane aiki.
- Zubar da sharar lantarki da lantarki (wanda ake amfani da shi a cikin Tarayyar Turai da sauran ƙasashe tare da sake amfani da su). Alamar da ke kan samfurin ko marufi na nuna dole ne a miƙa samfurin zuwa cibiyar tattarawa da aka ba da izini don sake sarrafa sharar lantarki da lantarki.
GAME DA KAMFANI
- SENECA srl; Ta Ostiriya, 26 - 35127 - PADOVA - ITALY;
- Tel. +39.049.8705359
- Fax +39.049.8706287
BAYANIN HULDA
- Goyon bayan sana'a: support@seneca.it
- Bayanin samfur: sales@seneca.it
- Wannan takarda mallakar SENECA srl ce. An haramta kwafi da sakewa sai dai idan an ba da izini. Abubuwan da ke cikin wannan takarda ya dace da samfurori da fasaha da aka kwatanta.
- Ana iya canza bayanan da aka bayyana ko ƙara don dalilai na fasaha da/ko tallace-tallace.
MULKI MULKI
- Girma: LxHxD 17.5 x 102.5 x 111 mm;
- Nauyi: 110 g;
- Yake: PA6, bakar
ALAMOMIN TA HANYAR LED AKAN GABA
| LED | MATSAYI | LED ma'ana |
| Farashin PWR | ON | Ana kunna na'urar daidai |
| RASHIN rawaya | Walƙiya | Anomaly ko kuskure |
| RX ja | Walƙiya | An kammala karɓar fakiti |
| RX ja | ON | Anomaly / Duba haɗin |
| TX ja | Walƙiya | An gama isar da fakiti |
BAYANIN FASAHA
| Bayani | |
| Voltage shigar: | Bipolar tare da FS shirye-shirye a +2Vdc da +10Vdc Input impedance>100kOhm |
| Shigarwa na yanzu: | Bipolar tare da FS Programmable a +20mA tare da 50Ohm shunt na ciki wanda za'a iya zaɓa ta hanyar DIP-switch. Samuwar wutar lantarki: 90 + 90mA a 13Vdc. |
| Adadin tashoshi: | 8 |
| Ƙaddamar shigarwa: | 15 bit + alamar. |
| Kariyar shigarwa: | ± 30Vdc ko 25mA |
| Daidaitaccen voltage da kuma halin yanzu: | Farawa: 0.1 na cikakken sikelin Linearity: 0.03% na sikelin. Sifili: 0.05% na sikelin.
TC: 100 ppm, EMI: <1 % |
| Samplokaci mai tsawo | 120 ms/tashar ko 60 ms/tashar |
| Lokacin sabunta ma'auni (sampMatsakaicin iyaka: 10ms) | An kunna tashar 1 (lokacin sabuntawa don tashar 1)
An kunna tashoshi 4 (lokacin sabuntawa don tashoshi 4) An kunna tashoshi 8 (lokacin sabuntawa don tashoshi 8) |
TSARIN KASANCEWA NA FARKO
KASANCEWA DA TSAMA
Matsayin DIP-switches yana bayyana sigogin sadarwa na Mod na module: Adireshi da ƙimar Baud Tebu mai zuwa yana nuna ƙimar Baud Rate da adireshi bisa ga saitin DIP:
Lura: Lokacin da DIP ya kashe 1 zuwa 8, ana ɗaukar saitunan sadarwa daga shirye-shirye (EEPROM).
Bayanan kula 2: Dole ne a ƙare layin RS485 kawai a ƙarshen layin sadarwa.
Dole ne saitunan tsoma-switches su dace da saitunan akan rajistar. Ana samun bayanin rijistar a cikin MANZON ALLAH.
HANYAR LANTARKI
Ana samun wutar lantarki da Modbus dubawa ta amfani da motar dogo ta Seneca DIN, ta hanyar haɗin baya na IDC10, ko na'urorin haɗi na Z-PC-DINAL-17.5.
Mai haɗa baya (IDC 10)
Hoton yana nuna ma'anoni daban-daban na masu haɗa IDC10 idan ana son aika sigina ta hanyar su kai tsaye.
Bayani
- A) Voltage shigarwa tare da wadatar firikwensin daga MODULE (13Vdc)
- B) Voltage shigarwa tare da samar da firikwensin BAYA zuwa daga MODULE
- C) Shigarwa na yanzu tare da wadatar firikwensin BAYA zuwa daga MODULE
- D) Shigarwa na yanzu tare da wadatar firikwensin daga MODULE (13Vdc)
- E) Shigarwa na yanzu tare da firikwensin EXTERNAL wutar lantarki
HANKALI
- Ba dole ba ne a ƙetare iyakokin samar da wutar lantarki na sama, saboda wannan na iya haifar da mummunar lalacewa ga tsarin. Kashe module ɗin kafin haɗa bayanai da abubuwan fitarwa.
- Don saduwa da buƙatun rigakafi na lantarki:
- amfani da igiyoyin sigina masu kariya;
- haɗa garkuwa zuwa tsarin ƙasa na kayan aiki na fifiko;
- ware igiyoyi masu kariya daga wasu igiyoyi da ake amfani da su don shigar da wutar lantarki (inverters, motors, induction oven, da sauransu…).
- shigar da fuse tare da ƙarfin MAX na 2.5A kusa da tsarin.
- tabbatar da cewa wutar lantarki voltage zuwa module ba ya wuce: 40Vdc ko 28Vac, in ba haka ba module zai lalace.
Takardu / Albarkatu
 |
SENECA Z-8AI Analog Input ko Fitar Module [pdf] Jagoran Jagora Z-8AI, Analog Input ko Output Module, Analog Module, Z-8AI Analog Input ko Fitar Module |
