NAIFAY manufactures aftermarket car stereos and multimedia head units featuring convenient upgrades like Apple CarPlay, Android Auto, and touchscreen displays.
NAIFAY is a consumer electronics brand specializing in automotive infotainment systems. The company produces a variety of aftermarket car stereos designed to modernize vehicle dashboards with advanced technology. Their product catalog includes universal single-DIN and double-DIN head units, as well as model-specific radios for popular vehicles from Toyota, Nissan, Honda, and Dodge.
NAIFAY multimedia units are known for integrating essential connectivity features such as wireless Apple CarPlay, Android Auto, and Bluetooth for hands-free calling and audio streaming. Many models also feature high-definition touchscreens, GPS navigation, and support for backup cameras and steering wheel controls. NAIFAY products are widely available through major online retailers, catering to car owners seeking cost-effective DIY audio upgrades.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Check your wiring connections. The red wire (ACC) should be connected to ignition power, and the yellow wire (B+) must be connected to the battery's positive terminal. If testing outside the car, twist the red and yellow wires together and connect to the positive power source, with black to negative.
The default Bluetooth PIN is typically '0000'. The device name often appears as 'CarKit', 'CAR-MP5', or similar variants in your phone's Bluetooth list.
For wired connections, use a high-quality data cable to connect your phone to the designated USB port (often the 4-pin or 6-pin USB cable from the back of the unit). For wireless models, pair via Bluetooth first, and the system should prompt to launch CarPlay or Android Auto.
This usually indicates the yellow wire (constant 12V memory) is not connected to a constant power source. Ensure the yellow wire is connected to the battery positive, not an ignition-switched source.
Common factory setting passwords include '113266', '8888', or '0000', depending on the specific firmware version. Consult your specific user manual for the exact code.