MOKO (MOKO Technology) is a manufacturer of smart IoT devices, including LoRaWAN trackers and Bluetooth beacons, alongside a popular line of consumer electronics accessories like keyboards and tablet cases.
MOKO Technology Ltd. is a leading provider of IoT (Internet of Things) hardware and manufacturing solutions based in Shenzhen, China. Founded in 2006, the company operates under the MOKO Smart brand to design and manufacture advanced wireless devices, including LoRaWAN trackers, Bluetooth Low Energy (BLE) beacons, smart plugs, and industrial sensors. These products are widely used in smart parking, asset tracking, and environmental monitoring applications.
In the consumer electronics sector, the brand name MoKo is recognized for high-quality mobile accessories. This extensive product line covers protective cases for tablets, foldable Bluetooth keyboards, and smartwatch bands. Whether providing enterprise-grade IoT hardware or enhancing personal device productivity, MOKO focuses on innovation and quality.
For technical support regarding IoT devices (Trackers, Beacons, Sensors):
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
MOKO LoRaWAN devices, such as the LW001 and LW009 series, are primarily configured using the 'MKLoRa' mobile app. Users can connect to the device via Bluetooth to adjust settings like reporting intervals and GPS parameters.
To pair most MoKo Bluetooth keyboards, turn the device on and press the specific pairing key combination (commonly Fn + C or Fn + T) until the LED indicator flashes blue. Then, select the keyboard from your device's Bluetooth settings menu.
For technical assistance with MOKO Smart devices, you can reach support at Support_lora@mokotechnology.com or Support_BLE@mokotechnology.com, depending on the product type.
You can reset the tracker via the MKLoRa app or by using a magnet. To perform a magnetic reset, approach and quickly move the magnet away from the Hall sensor area on the device 3 times; the LED will flash to confirm the reset.