1. Introduction
This manual provides detailed instructions for the proper use and care of your MoKo Stand Case for the Kindle Scribe 10.2-inch e-Reader. Designed for both the 2024 and 2022 releases, this premium case offers robust protection, versatile viewing angles, and enhanced functionality with its integrated pen holder and auto sleep/wake feature.
2. Compatibility
This case is specifically designed for the Kindle Scribe 10.2-inch e-Reader (2024/2022 Release, 1st Generation). It will NOT fit any other Kindle models or e-readers. Please verify your device model before attempting to install the case.
3. Features
- Premium Material Construction: Features a durable PU leather exterior, an ultra-soft fiber lining for screen protection, and a hard PC back shell for sturdy, scratch-proof defense.
- Two Viewing Angles: Strong magnetic connection allows for stable trifold and slot stand configurations, providing comfortable viewing and writing positions.
- Integrated Pen Holder: A dedicated slot securely holds your Kindle Scribe pen, preventing loss and ensuring it's always accessible. (Note: Pen is not included with the case).
- Auto Sleep/Wake Function: Built-in magnets automatically wake your Kindle Scribe when the lid is opened and put it to sleep when closed, preserving battery life.
- Heavy Duty Protection: Shockproof, drop-resistant, and anti-dust design safeguards your device from unexpected impacts, knocks, scratches, and screen damage.
- Slim & Lightweight Design: Adds minimal bulk to your device while providing comprehensive protection.
4. Setup Instructions
- Inserting Your Kindle Scribe:
Gently align your Kindle Scribe with the hard PC back shell of the case. Press the device firmly but carefully into the shell until it snaps securely into place. Ensure all edges are properly seated within the case's frame.
Figure 1: Kindle Scribe securely fitted into the MoKo Stand Case (Green variant shown). - Using the Pen Holder:
Locate the integrated pen holder slot on the side of the case. Insert your Kindle Scribe pen into this slot. The holder is designed to keep your pen securely in place during transport and use.
Figure 2: Illustration of the secure pen holder feature.
5. Operating Instructions
- Auto Sleep/Wake Function:
To activate the auto sleep/wake feature, simply open the front cover of the case to wake your Kindle Scribe. Close the cover to put your device to sleep. This magnetic function helps conserve battery life.
Figure 3: How the magnetic auto sleep/wake feature works. - Adjusting Viewing Angles (Stand Function):
The trifold front cover allows for multiple viewing and typing angles. Fold the cover back to create a stable triangular stand for hands-free viewing or a lower angle for comfortable writing. The strong magnetic connection ensures stability.
Figure 4: Examples of multiple use angles for viewing and writing.
6. Maintenance
- Cleaning the Exterior (PU Leather): Wipe the PU leather surface with a soft, damp cloth. For stubborn stains, use a mild soap solution and then wipe clean with a dry cloth. Avoid harsh chemicals or abrasive cleaners.
- Cleaning the Interior (Microfiber Lining): Gently wipe the microfiber lining with a dry, soft cloth to remove dust or smudges. If necessary, lightly dampen the cloth with water.
- Cleaning the Hard PC Back Shell: The PC back shell can be cleaned with a soft, damp cloth.
- General Care: Avoid exposing the case to extreme temperatures, direct sunlight for prolonged periods, or sharp objects that could scratch the material.
7. Troubleshooting
- Device Not Waking/Sleeping Automatically:
Ensure your Kindle Scribe is correctly seated within the hard PC back shell. The magnetic sensors for auto sleep/wake need proper alignment. Check for any obstructions between the case lid and the device screen.
- Case Not Standing Stably:
Ensure the trifold stand is fully engaged and the magnetic connections are secure. Place the case on a flat, stable surface.
8. Specifications
| Attribute | Detail |
|---|---|
| Compatible Device | Kindle Scribe 10.2-inch e-Reader (2024/2022 Release, 1st Generation) |
| Material | PU Leather exterior, Microfiber interior, Hard PC back shell |
| Dimensions (L x W x H) | 9.25 x 8.39 x 0.59 inches (23.5 x 21.3 x 1.5 cm) |
| Weight | Approximately 0.35 kg (0.77 lbs) |
| Features | Shockproof, Drop resistance, Anti-Dust, Hard protection, Auto Sleep/Wake, Pen Holder, Multiple Viewing Angles |
| Battery Included | No |
| High-Concerned Chemical | None |
9. User Tips
- Color Options: The MoKo Stand Case is available in various colors, including Black and Green, to suit your personal style. Check product listings for current availability.
- Pen Security: Always ensure your Kindle Scribe pen is fully inserted into the pen holder to prevent it from falling out, especially when carrying your device.
- Screen Protection: While the case offers robust protection, avoid placing heavy or sharp objects directly on the screen when the case is closed to prevent potential damage.
10. Warranty & Support
For any questions, concerns, or support regarding your MoKo Stand Case, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific warranty information and contact details.
