MoKo Surface Pro 11 10 9

Contents

MoKo Protective Rugged Case for Microsoft Surface Pro 11, 10, and 9

Model: Surface Pro 11 10 9 Series

Brand: MoKo

Introduction

This manual provides instructions for the installation, operation, and maintenance of your MoKo All-in-One Protective Rugged Cover. Designed specifically for the Microsoft Surface Pro 11, Surface Pro 10, and Surface Pro 9 (13-inch models), this case offers robust protection and enhanced functionality, including compatibility with the Type Cover keyboard and the original kickstand.

MoKo Rugged Case on a Microsoft Surface Pro tablet, showing kickstand and pen holder.

Figure 1: MoKo Rugged Case (Pink) on Microsoft Surface Pro

Compatibility

The MoKo Protective Rugged Case is precisely engineered to fit the following Microsoft Surface Pro models:

  • Microsoft Surface Pro 11 (13" Touchscreen Display)
  • Microsoft Surface Pro 10 (13" Touchscreen Display)
  • Microsoft Surface Pro 9 (13" Touchscreen Display)

This case is NOT compatible with other Surface Pro tablets or any other tablet series. Please verify your tablet model before installation.

Compatibility chart showing Surface Pro 11, 10, and 9 with checkmarks.

Figure 2: Compatible Surface Pro Models

Setup and Installation

Follow these steps to install your MoKo Rugged Case and utilize its features:

  1. Case Installation: Gently align your Microsoft Surface Pro tablet with the case, ensuring all edges and corners fit snugly into the TPU frame. Apply even pressure around the perimeter until the tablet is fully seated within the case.
  2. Attaching the Type Cover Keyboard: The case is designed with a channel to allow direct connection of your Microsoft Type Cover keyboard. Simply attach the keyboard as you normally would to the tablet's magnetic connector.
  3. Securing the Type Cover: A built-in latch is provided to keep your Type Cover folded and secure when not in use or while on the go. Wrap the elastic latch around the folded keyboard and tablet to prevent accidental opening.
Diagram showing how to attach the Type Cover keyboard to the tablet in the case using the built-in latch.

Figure 3: Attaching the Type Cover Keyboard with Built-in Latch

Video Guide: Installation and Features

Video 1: Product demonstration showing installation, kickstand support, pen holder, rugged corners, screen/camera protection, and keyboard compatibility.

Operating Instructions

The MoKo Rugged Case enhances the usability of your Surface Pro with several integrated features:

  • Using the Original Kickstand: The case features an unobstructed cutout that allows the full swing of your Surface Pro's original kickstand. This enables you to adjust the tablet to your preferred viewing, writing, or typing angle without removing the case.
  • Elastic Hand Strap: For comfortable one-hand use, slide your hand through the elastic hand strap located on the back of the case. This provides a secure grip, reducing the risk of accidental drops, especially when moving or standing.
  • Accessing Ports and Controls: Precise cutouts ensure easy access to all buttons, the charging port, and the two USB-C ports. You can connect a dock station adapter to the USB-C ports without needing to remove the case.
  • Heat Dissipation: Integrated heat emission holes allow sufficient airflow to prevent your tablet from overheating during extended use.
Image showing the case allowing full swing of the original Surface Pro kickstand.

Figure 4: Full Swing of Original Kickstand

Image of a person holding the tablet with the silicone hand strap for a comfortable grip.

Figure 5: Using the Silicone Hand Strap

Diagram highlighting precise cutouts for charging port, USB-C ports, and heat emission holes.

Figure 6: Precise Cutouts for Ports and Ventilation

Maintenance and Care

To ensure the longevity and appearance of your MoKo Rugged Case, follow these simple maintenance guidelines:

  • Cleaning: Use a soft, damp cloth to wipe down the case. For stubborn dirt, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners, as these may damage the TPU and PC materials.
  • Storage: When not in use, store the case in a cool, dry place away from direct sunlight and extreme temperatures.
  • Inspection: Periodically inspect the case for any signs of wear or damage. While the case is designed for durability, excessive impact can compromise its protective qualities.

Troubleshooting

If you encounter any issues with your MoKo Rugged Case, consider the following:

  • Difficulty Attaching Keyboard: Ensure the tablet is correctly seated within the case and the magnetic connectors are aligned. The built-in latch is for securing the keyboard when folded, not for initial attachment.
  • Ports Not Accessible: Double-check that your tablet model is one of the compatible Surface Pro models (11, 10, or 9). The case features precise cutouts, so if ports are obstructed, the tablet might not be correctly installed or the case might be for a different model.
  • Kickstand Not Functioning Properly: The case is designed to allow the full swing of the original kickstand. Ensure no debris is obstructing the kickstand's movement or the case's cutout.
  • Screen Protection Concerns: The case features a raised screen edge to protect the screen from drops. For additional protection, the case is compatible with most tempered glass screen protectors.
Close-up of the raised screen edge of the case, highlighting screen protection.

Figure 7: Raised Screen Edge for Enhanced Protection

Specifications

Attribute Value
Pattern Type Solid
Style Casual
Feature Waterproof, Shockproof, Drop resistance, Anti-Dust, Soft, Hard
Package Yes
Length 11.69inch
Width 8.74inch
Model Number for Microsoft Surface Pro 11, Surface Pro 10, Surface Pro 9
Compatible Brand For Microsoft
Material TPU
Type Protective Shell/Skin
Application Laptop Size 13"
Origin Mainland China
Size 11.69 x 8.74 x 0.75 inches
Compatibility for Microsoft Surface Pro 11, Surface Pro 10, Surface Pro 9
Diagram illustrating the case's construction with scratch-proof PC back and impact-resistant TPU edge.

Figure 8: Case Construction Details

User Tips

  • Verify Tablet Model: Always confirm your specific Microsoft Surface Pro model (e.g., Surface Pro 11, 10, or 9) to ensure perfect compatibility with the case. This case is designed for the 13-inch touchscreen display models.
  • Dock Station Adapter: The precise cutouts allow for the use of a dock station adapter with the two USB-C ports without needing to remove the case.

Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please refer to the seller's contact information or the platform's customer service portal. Keep your purchase receipt for any warranty services.

© 2023 MoKo. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.