GEARELEC specializes in motorcycle communication systems, helmet Bluetooth headsets, and automotive electronics including car multimedia players and diagnostic tools.
GEARELEC is a manufacturer of automotive and motorcycle electronics designed to enhance connectivity and safety on the road. The brand is widely recognized for its range of motorcycle helmet Bluetooth headsets and intercom systems, such as the GX10, G2, and Shark series. These devices facilitate crystal-clear communication between riders with features like CVC noise cancellation, long-range intercom capabilities (up to 2000m for some models), and seamless music sharing.
In addition to motorcycle audio solutions, GEARELEC produces reliable car electronics, including Android multimedia players with wireless CarPlay and Android Auto support, as well as OBD2 diagnostic scanners. By combining affordable technology with user-friendly designs, GEARELEC aims to provide drivers and riders with accessible tools for entertainment, navigation, and vehicle maintenance.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Typically, you must press and hold the Power or Multifunction button for several seconds until the indicator light flashes red and blue alternately, indicating pairing mode. Then, select the device (e.g., 'GEARELEC GX10') in your phone's Bluetooth settings.
Yes, most GEARELEC intercoms, such as the GX10 and G2 models, are rated IP67 or similar, making them water-resistant and suitable for use in rain.
The number of riders depends on the specific model. For example, the GX10 supports networking for 2 to 10 riders, while the G2 is designed primarily for 2 riders.
Factory reset procedures vary by model. For the GX10, hold the Multifunction, Bluetooth Talk, and M buttons simultaneously for 5 seconds in the power-on state. For the G2, press and hold Power, Volume Down, and Volume Up buttons for 3 seconds.