1. Introduction
Dear Customer:
Thank you for purchasing our car MP5 player. It is our honor and pleasure to serve you. Before using this product, please read this manual very carefully and keep it properly. Due to differences in production date and batch, instructions may vary slightly. We hope you will enjoy this product and that we can build a long-term business relationship in the near future. Your kind feedback and support will help us to improve.
2. Safety Information
For your safety, please observe the following guidelines:
- Do not watch videos or operate the machine while driving. Adjust the volume to a clear level that can be heard outside the vehicle.
- Before operation, read this manual and other system manuals to understand safety tips and warning signs. Keep this manual in an easily accessible place for future reference.
- Prioritize traffic safety at all times.
- If you encounter difficulties operating the system, pull over to a safe place before attempting to resolve them.
- Do not allow children to operate this machine to prevent personal injury or damage.
- Follow traffic rules when using the satellite navigation function.
- Do not use electronic equipment or open flames in areas such as gas stations, breweries, or strong electromagnetic interference regions, as this may cause danger.
- Do not attempt maintenance, installation, or repair of the machine yourself. Installation or repair by untrained personnel or those lacking experience in electronic equipment or vehicle accessories is very dangerous.
- Do not install or store the machine in direct sunlight or in other harmful material environments, especially near the LCD screen. If the LCD screen is installed near an air conditioner vent, ensure cool and hot air does not blow directly onto the machine, as this may damage it or cause personal injury.
- Do not use sharp objects on the screen or press it with hard objects, as this will damage the display or touch screen.
- To ensure normal operation and prevent fire or electric shock, do not expose the machine to damp air or liquids.
Important Warnings:
- Warning: The machine is suitable for a car 12V power supply system (must have a grounding line). Do not install it in a 24V car, as this will damage the machine.
- Caution: Do not replace the power fuse without professional guidance. Using an improper fuse can damage the machine and cause a fire.
- Safety: To avoid traffic violations, the driver must not watch videos or operate the machine while driving.
- Professional Installation: For safety and to ensure normal product use, please have this product installed, disassembled, or repaired by a professional. Contact your local professional car audio store for details.
- Environment: Prevent this product from being in a humid environment or contact with water to avoid short circuits, electric shocks, or other damage and fire.
Note: To prevent short circuits, before installation, remember that the car must be stalled and the ACC connected to B+.
3. Package Contents
Please check the package contents carefully upon receipt:
- 1 x Car Radio
- 1 x GPS Antenna
- 1 x 16-Pin Power Cable
- 1 x RCA Cable
- 1 x Reversing Video Input Cable
- 2 x USB Cables
- 2 x Installation Brackets
- 4 x Screws
- 1 x User Manual

4. Product Overview and Features
The GEARELEC 9-inch Car Radio is a versatile multimedia player designed for universal 2-DIN car stereo applications. It offers a wide range of features for an enhanced in-car experience.

Key Features:
- Radio (FM): Enjoy your favorite radio stations.
- USB Flash Drive Support: Play audio, video, and view pictures from USB drives.
- Bluetooth Function: Hands-free calling and audio streaming.
- RCA Audio Output: Connect to external subwoofers for enhanced bass.
- Reversing Rear View Camera Output: Supports optional rearview cameras.
- Video Output: Connect to external displays.
- Steering Wheel Control Learning: Integrate with your vehicle's steering wheel controls.
- Android Dashcam Output: Supports Android dashcam input.
- WiFi Connectivity: Access online content and apps.
- GPS Navigation: Built-in GPS receiver with online and offline map support.
- Phone Screen Mirroring: Mirror your iPhone or Android phone screen.
- App Installation: Download and install various apps from the store.
- Switchable Themes: Customize the user interface appearance.
- RDS Function: Receive real-time traffic radio information.
- Split Screen Function: Run two applications side-by-side.
- CarPlay Function: Supports optional CarPlay for seamless iPhone integration.

Product Dimensions:

Dimensions: 178mm (7.01 inches) width x 104mm (4.09 inches) height x 27mm (1.06 inches) depth.
5. Installation
5.1. Wiring Diagrams
Refer to the following diagrams for proper wiring connections. Incorrect wiring can lead to malfunction or damage.

16PIN Power Cable Definition:
| Wire Color | Function |
|---|---|
| White | Front speaker L+ |
| White/black striped | Front speaker L- |
| Gray | Front speaker R+ |
| Gray/black striped | Front speaker R- |
| Green | Rear speaker L+ |
| Green/black striped | Rear speaker L- |
| Purple | Rear speaker R+ |
| Purple/black striped | Rear speaker R- |
| Black | Ground Wire / B- |
| Yellow | Constant Power Supply +12V |
| Red | Ignition Switch (ACC) |
| Orange | Illuminate Backlight |
| Pink | Reversing camera control line |
| Brown | Steering Wheel Control 2 (KEY2) |
| Orange/black striped | Steering Wheel Control 1 (KEY1) |
| Blue | Auto Antenna Power |
RCA Cable Definition:
| Connector | Function |
|---|---|
| AUX R IN | Audio Right Input |
| AUX L IN | Audio Left Input |
| AUX R OUT | Audio Right Output |
| AUX L OUT | Audio Left Output |
| VIDEO OUT | Video Signal Output |
| VIDEO IN -1 | Video Signal Input 1 |
| VIDEO IN -2 | Video Signal Input 2 |
| AMP Control | AMP Control |
| USB1 (4PIN) | USB Cable |
| USB2 (6PIN) | Driving Recorder |
| REARCAMEAR-IN | Camera Signal Video In |
| RADIO Antenna | Radio Antenna |
| GPS Antenna | GPS Antenna |
5.2. General Installation Steps
Before permanent installation, it is recommended to test the unit with a battery or power supply.
- How to find the car's power cord: Turn the car key to ACC. Set a multimeter to 20V. Connect the black probe to ground (e.g., outer casing of the cigar lighter) and use the red probe to test each wire. A car typically has two 12V wires (some only one). These are positive. To distinguish ACC from memory, pull out the car key after finding the two positive wires. The memory line remains electrically charged after the key is removed.
- How to find the car's ground wire (negative pole): Set the multimeter to the on/off beep setting. Connect the black probe to ground and use the red probe to test all wires except the two power lines. The energized wire is the ground wire. Some cars have two ground wires.
- How to find the car's horn line: Set the multimeter to the on/off beep setting. Connect the black probe to any wire except the power and ground wires. Use the red probe to test remaining wires. The energized wire is the horn wire. Repeat for other horn lines.
- How to test if the unit works properly: Twist the red and yellow wires together and connect them to the positive pole. Connect the black wire to the negative pole. Press the switch to turn on the unit. Connect a horn to the horn wire (two wires of the same color; white to positive, white with black stripe to negative). Test the unit's functions.
5.3. Reversing Camera Wiring
The reversing camera function requires proper wiring to display the image correctly.

Schematic Diagram of Reversing Camera Wiring:
- Red Wire (Camera Power): Connect to the positive pole of the reverse lamp.
- Black Wire (Camera Ground): Connect to the power negative pole.
- Video Signal Cable: Connect the camera's video output to the unit's REARCAMEAR-IN port.
- Pink/Brown Wire (Reversing Detection): Connect this wire (from the unit's power line) to the positive pole of the reverse lamp. This signals the unit to switch to rearview mode.
6. Operating Instructions
6.1. Basic Functions
| Button/Function | Description |
|---|---|
| MIC | For voice operation, press during Bluetooth operation. |
| RST (Reset) | Press with a pointed object (e.g., ballpoint pen) to reset the unit to its initial factory settings. |
| Power Button | When off, press to turn on. When on, long press for 3 seconds to turn off. Short press repeatedly to mute and unmute. |
| Home Button | Press to go to the MAIN MENU. |
| Back Button | Press to return to the previous interface. |
| Volume + | Press repeatedly or press & hold to increase sound output level. |
| Volume - | Press repeatedly or press & hold to reduce sound output level. |
6.2. Bluetooth Connection
To connect your phone via Bluetooth:
- Turn on the car radio unit and activate Bluetooth on your phone.
- Search for the unit's Bluetooth name (Default Name: Car BT) on your phone.
- Select 'Car BT' and click connect. Your phone should indicate a successful connection.
- To play music, switch to Bluetooth mode on the unit and select songs on your phone.
- You can also dial numbers on your phone for hands-free calls.
Default PIN Code: 0000

6.3. GPS Navigation
The unit supports both online and offline GPS navigation. Ensure the GPS antenna is properly installed for optimal signal reception.

Navigation Antenna Installation:
- Tighten the screws of the navigation antenna and the unit.
- Fix the navigation antenna module in a location with direct sunlight or on the windshield. Proper installation is crucial for good navigation signals.
6.4. WiFi Connectivity
Connect the unit to a Wi-Fi network or mobile hotspot to access online content, browse the internet, and use various applications.

6.5. CarPlay and Android Auto
The unit supports both Apple CarPlay and Android Auto, allowing you to integrate your smartphone for navigation, communication, and entertainment.

6.6. Mirroring Function
Mirror your smartphone screen (iOS or Android) to the car radio display, either wired or wirelessly.

6.7. DSP Digital Sound Effects
Customize your audio experience with the built-in Digital Sound Processor (DSP) and equalizer settings.

6.8. USB Flash Drive Playback
The unit supports playing various media formats from USB flash drives.

6.9. RDS and FM Radio
Enjoy FM radio with RDS functionality for clear channel search and traffic information.

6.10. Steering Wheel Control
Control your car's player using the buttons on your steering wheel after proper configuration.

7. Maintenance
7.1. Machine Reset
A reset may be necessary in certain situations:
- The machine must be reset upon first use or after replacing the battery.
- If the machine's function is not normal, a reset is required.
- To restore factory settings, navigate to the system settings interface and click 'Restore factory settings'. This will return the machine to its initial state.
- Alternatively, use a pointed object to press the RESET button on the panel, or select 'System RESET' in the system settings. This will turn off the machine and restore it to its factory initial state.
Note: Pressing the RESET button will initialize the system, losing current time and previously set values.
8. Troubleshooting
If you encounter any issues with your car radio, refer to the following troubleshooting guide:
8.1. Unable to Boot Normally
- Wrong Wiring: Ensure the yellow (positive), red (ACC/key control), and black (negative) wires are correctly connected. Missing or incorrect connections will prevent booting.
- Non-Standard Car Lines: If your car's original wiring colors do not match the unit's, connecting by color alone may cause damage or prevent booting.
- Original Plug Incompatibility: The car's original plug cannot be directly inserted into the new unit.
- Broken Fuse: Check if the fuse on the yellow wire is broken. If not, twist the yellow and red wires together, turn the key, and press the power button to test.
- Short-Circuited Protection Circuit: If fuses repeatedly blow, the unit's protection circuit may be short-circuited. This requires professional repair.
8.2. Automatic Shut-Down
- Cable Error: If the blue (automatic antenna power supply) cable is connected to the unit's power cable, it will cause automatic shutdown. Follow the correct wiring method.
- Unstable Voltage: Test the unit with a stable 12V-5A power supply. If it still shuts down, the unit may be faulty.
8.3. Audio Noise
- Low Speaker Power: If the original speaker power is too low, noise may occur at high volumes. Solution: Do not set the volume too high.
- Grounded Speaker Cable: Ensure the speaker cable is not grounded. Connect the iron speaker cable directly to the unit's speaker cable.
8.4. Remote Control Not Working
- Battery Power: Check if the remote control battery has power. Test by pointing it at a phone camera and pressing a button; if the light doesn't flash, replace the battery.
8.5. Settings Not Saved (No Memory)
- Incorrect Wiring: The yellow and red lines might be connected together, or reversed. Ensure the yellow line is connected to constant positive and the red line to key control.
8.6. Bluetooth Not Working
- Searchability: Check if your phone can find the unit's Bluetooth code (Car BT).
- Connection Steps: Follow the connection steps in section 6.2.
8.7. Product Smoking / Internal Circuit Burned
- If the product smokes, the internal circuit is likely burned. Changing the fuse will not solve the problem. The unit requires repair.
8.8. Sound Adjustment / Equalizer Issues
- Adjusting Sound: Adjust the volume knob.
- Equalizer Settings: Press the volume knob to display the equalizer (SEL) and rotate it to adjust sound effects.
- No Sound: Reset the unit or unplug/replug the power cord. Check if the volume knob is broken and needs replacement.
8.9. Reversing Image Not Displayed
- Wrong Wiring / Less Wiring: Refer to section 5.3 for correct reversing camera wiring.
- Broken Camera: If the camera's lamp does not light up when properly wired, the camera is broken and needs replacement.
8.10. USB Flash Disk Not Playing
- Format/File System: Format the USB flash disk to FAT32. Re-download songs and try again. If it still doesn't work, replace the USB drive.
- No Content: Check the USB drive on a computer to ensure it contains content.
8.11. FM Radio Not Receiving Programs
- Antenna Connection: Ensure the antenna plug is fully inserted and not disconnected.
- Channel Search: Hold the AMS button for 2 seconds for automatic search, or use up/down buttons for manual search. If issues persist, unplug the antenna and use a screwdriver or metal strip as a temporary antenna.
8.12. No Sound After Installation / After a While
- Wiring Error / Short Circuit: Disconnect all speaker cables from the unit (except the main power) and connect an external speaker to the gray and purple wires of the tail line. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is broken.
9. Specifications
| Category | Specification |
|---|---|
| General | |
| Operating System | Android 13 |
| CPU | A7, 1.3GHz, Quad CORE |
| RAM | 2GB (Other configurations like 6GB, 8GB available) |
| ROM | 128GB (Other configurations like 32GB, 64GB available) |
| Power Requirement | DC 12 Volts, negative ground |
| Working Voltage | 12 ~ 14.4V |
| Working Temperature | -10 ~ +60 ℃ |
| Item Weight | 0.9kg |
| Certification | CE, RoHS |
| Factory Setting Password | 1234 |
| Display | |
| Display Size | 9 inches (IPS screen) |
| Resolution | 1024x600 |
| Video System | NTSC |
| Video Output Level | 1.0 Vp-p 75 Ohms |
| Horizontal Resolution | 500 |
| Audio | |
| Load Impedance | 4 Ohms |
| Maximum Power Output | 60 Watts x 4 (RMS) |
| Tone Control - Bass (100 Hz) | +/- 8 dB |
| Tone Control - Treble (10 KHz) | +/- 8 dB |
| Max Output Level | 2 Vrms (+/-3 dB) |
| Frequency Response | 20 Hz - 20 KHz |
| Signal to Noise Ratio | 85 dB |
| Channel Separation | 80 dB |
| Radio (FM) | |
| Frequency Range | 87.5 – 108 MHz |
| Usable Sensitivity (-20 dB) | 15 dB |
| Signal to Noise Ratio | 60 dB |
| Stereo Separation (1KHz) | 30 dB |
| Frequency Response | 30 Hz - 15 KHz |
| Connectivity | |
| Bluetooth Version | 5.0 (Default Name: Car BT) |
| Bluetooth Max Distance | 5 meters |
| WiFi Frequency | 2.4GHz |
| GPS Signal | GPS/AGPS/GLONASA/Beidou |
| USB Ports | USB 2.0 (4-pin for flash drives), USB 2.0 (6-pin for dashcam input) |
| Supported Media Formats | |
| Audio Format | MP3/WMA/WAV/APE/FLAC/AAC/OGG/RM |
| Video Format | MPEG/AVI/RM/FLV/ASF/WMV/MP4/MKV/GMO/TS/DivX/RMVB/VOB |
| Picture Format | JPG/BMP/PNG/JPEG/GIF |
| OSD Language | |
| Languages | Chinese (Simplified), Chinese (Traditional), Albanian, Arabic, Irish, Estonian, Belarusian, Bulgarian, Icelandic, Polish, Persian, Boolean text (Dutch South Africa), Danish, German, Russian, French, Filipino, Finnish, Georgian, Korean, Dutch, Catalan, Czech, Croatian, Latin, Latvian, Lithuanian, Romanian, Malay, Macedonian, Norwegian, Portuguese, Japanese, Swedish, Serbian, Slovak, Slovenian, Swahili, Thai, Turkish, Welsh, Ukrainian, Hebrew, Greek, Spain's Basque, Spanish, Hungarian, Armenian, Italian, Indonesian, English, Vietnamese |
10. Warranty and Support
10.1. Warranty Information
This product comes with a 365-day warranty from the date of purchase.
10.2. Customer Support
If you have any questions or require assistance with your GEARELEC car radio, please contact our customer service staff. The product UI interface or functions may be modified and upgraded over time without prior notice. Any minor differences in the manual are considered normal.
For detailed instructions, you can also refer to the official user manual PDF: View User Manual (PDF)
11. User Tips
- Rearview Camera: The unit supports a rearview camera function. Ensure it is properly wired according to the installation instructions for optimal performance.
- Wiring Check: Always double-check all wiring connections, especially power and speaker wires, before finalizing installation to prevent common issues like no power or no sound.
- Antenna Connection: For clear FM radio reception and reliable GPS signals, ensure all antennas are securely connected and placed in an optimal location (e.g., GPS antenna on the windshield with clear sky view).
12. Frequently Asked Questions (FAQ)
- Q: Why is my unit not powering on?
- A: Check all power connections (yellow, red, black wires) for correct polarity and secure attachment. Verify the fuse on the yellow wire. If the issue persists, test the unit with a known good 12V power source.
- Q: My unit automatically shuts down. What should I do?
- A: Ensure the blue automatic antenna power supply cable is not incorrectly connected to the unit's main power. Also, check for unstable voltage supply to the unit.
- Q: I hear noise from the speakers. How can I fix this?
- A: This can be due to low original speaker power (avoid very high volumes) or a grounded speaker cable. Ensure speaker cables are not touching metal parts of the car chassis.
- Q: My remote control is not working.
- A: Check the battery in the remote control. Replace it if necessary. You can test the remote by pointing it at a phone camera and pressing a button; if the camera sees a light, the remote is transmitting.
- Q: Why are my settings not being saved?
- A: This usually indicates an issue with the memory wiring. Ensure the yellow (constant positive) and red (ACC/key control) wires are correctly connected and not reversed or connected together.
- Q: My Bluetooth is not connecting or working.
- A: Make sure the unit's Bluetooth is enabled and your phone can detect 'Car BT'. Try restarting both the unit and your phone. The default PIN is 0000.
- Q: The reversing camera image is not displayed.
- A: Verify all wiring for the reversing camera as per section 5.3. Check if the camera itself is functional (e.g., if its light comes on when reverse gear is engaged).
- Q: My USB flash drive is not playing content.
- A: Ensure the USB drive is formatted to FAT32 and contains compatible media files. Try re-downloading content or using a different USB drive.
- Q: The FM radio is not receiving stations.
- A: Check that the antenna plug is fully inserted and the antenna cable is not damaged. Perform an automatic channel search by holding the AMS button for 2 seconds.
- Q: There is no sound after installation or after some time.
- A: Disconnect all speaker cables from the unit (except main power) and test with an external speaker. This helps determine if the issue is with the unit, the car's wiring, or the speakers themselves.