GEARELEC 2 Din Car Radio Android 14 Car Multimedia Player

Contents

GEARELEC 2 Din Car Radio Android 14 Car Multimedia Player

User Manual

Introduction

Thank you for purchasing the GEARELEC 2 Din Car Radio. This multimedia player is designed to enhance your driving experience with its advanced features, including Android 14, GPS navigation, WiFi connectivity, CarPlay, and Android Auto. Please read this manual carefully before installation and operation to ensure proper use and to prevent damage.

For additional guidance and detailed diagrams, you may refer to the official user manual PDF: View User Manual (PDF)

Safety Precautions

To prevent injury or fire, please observe the following precautions:

  • Do not stare at the product's display screen for extended periods while driving.
  • Do not install or operate the product with wet hands.
  • Do not install the product in environments characterized by high temperatures, high humidity, or the presence of flammable or explosive gases or liquids.
  • Severe vibration, impact from metal objects, or the ingress of water into the unit may cause damage.
  • Do not install the product in a location that obstructs the driver's view or compromises driving safety.
  • Do not install the product on an airbag cover or within the deployment zone of an airbag.
  • Do not subject the product to voltages exceeding its rated voltage.
  • Do not use non-original cables or accessories.
  • Do not attempt to disassemble, repair, or modify the product or its accessories yourself.

Setup and Installation

Before installation, test the machine first. After receiving the product, do not take the product directly to the car for installation, as it may be affected by long-distance transportation.

Rear Interface Description

The following diagram illustrates the rear interface connections for the car radio:

Rear Interface Description

Diagram showing the various ports on the back of the car radio, including 20P, 12P, 10P, 8P, 6P, and 4P connectors, with labels for audio outputs, video inputs, microphone, 4G SIM slot, amplifier control, and antenna connections.

Universal Machine Power Cord Wiring

The universal machine power cord has loose wires. You need to identify the wires corresponding to each function, connect them, and insulate them with tape.

Universal Power Cord Wiring Diagram

Diagram illustrating the universal power cord with labeled wires (Black: GND, Yellow: Battery +12V, Red: Ignition Switch, Orange: Illumination, Pink: Reversing Camera Control, Brown: Steering Wheel Control-2, Orange/Black: Steering Wheel Control-1, Blue: Auto Antenna Power). Also shows speaker connections (Front Right, Front Left, Rear Right, Rear Left).

Use a multimeter or 12V tester to measure the original vehicle wiring harness:

  1. When the key is on "LOCK", a line is 12V (battery +).
  2. When the key is on "ACC", a line is 12V. When the key is on "LOCK", this line becomes 0V (ACC line).
  3. When the headlights are turned on, a line is 12V. When the lights are turned off, this line becomes 0V (ILL line).

Special Vehicle Power Cord

For vehicles with a special power cord, simply plug it into the original car plug. The CANBUS protocol box needs to be connected to the 8-Pin position of the host.

Special Vehicle Power Cord and CANBUS Protocol Box

Diagram showing the connection of the special vehicle power cord and CANBUS protocol box to the car radio. Note: Power cord plugs and CANBUS protocol boxes may vary by brand.

Reversing Camera Installation

To install the reversing camera:

  1. Locate the reverse control line on the power line of the unit (pink wire). Connect this line to the positive 12V pole.
  2. Locate the CAM video input interface on the back of the unit.
  3. Connect the camera's red power wire to the positive pole of the reverse lamp and the yellow video cable to the CAM video input. The black power wire of the camera is not used.
Reversing Camera Installation Diagram

Wiring diagram for connecting a reversing camera, showing connections to the power socket, A5 (Pink) for reverse signal, and video input. The camera itself is shown with power and video connections.

Note: Some models adapt to the camera's resolution type. Others may require manual setting of the camera's resolution type for proper display.

Steering Wheel Control Learning

To configure steering wheel controls:

  1. Press and hold a button on the original car's steering wheel.
  2. Find the corresponding button icon on the car radio screen.
  3. Click the icon to change its color, indicating successful learning.
Steering Wheel Control Learning Diagram

Diagram showing the connection of KEY1 (Orange/Black) and KEY2 (Brown) wires for steering wheel controls, with an example of the on-screen learning interface.

Operation

The GEARELEC Car Radio offers a wide range of features for an enhanced in-car experience.

Core Functions

  • System: Android 14, Quad Core 1.3GHz Processor (A53)
  • Display: 7-inch IPS HD touch screen (1024x600 resolution)
  • Memory: 4GB RAM, 64GB ROM
  • Connectivity: Wireless WiFi (2.4GHz/5GHz), Bluetooth 5.1
  • Navigation: Built-in GPS (Beidou/GPS/GLONASS), supports offline maps
  • Audio: FM/RDS Radio (87.5~108.0MHz), 4x60W output power, YD7388 Amplifier IC, DSP, Subwoofer output
  • Smartphone Integration: Wired & Wireless CarPlay, Wired & Wireless Android Auto, Wired & Wireless Mirrorlink (Android & Apple phones)
  • Multimedia: USB flash drive reading (audio/video/images), Video HD Playback (1080P), Audio/Video input
  • Additional Features: Steering wheel control learning, Rearview camera support (AHD/CVBS), Dashcam support (USB), 7-color button lighting, 25 built-in UI themes, USB mobile phone charging, External microphone support.

CarPlay & Android Auto

Connect your iPhone or Android device for hands-free calls, navigation, and music.

Wired & Wireless CarPlay/Android Auto

Image showing the car radio display with CarPlay and Android Auto interfaces, demonstrating voice commands for music and navigation.

Wired Connection: Simply connect your phone via a USB data cable to automatically enter the CarPlay or Android Auto interface.

Wireless Connection:

  1. Turn on Bluetooth and Wi-Fi functions on your mobile phone.
  2. Connect to the car radio's Bluetooth.
  3. The system will automatically enter the CarPlay or Android Auto interface.

Note: The signal is transmitted via Wi-Fi. If Bluetooth is turned off, it will still transmit normally. If Wi-Fi is turned off, CarPlay/Android Auto will disconnect.

Project your phone screen onto the car radio display. Supports both wired and wireless connections for Android and Apple phones.

iPhone Mirrorlink: When connected, the iPhone screen content is projected. Touch input is NOT supported on the car screen.

Android Mirrorlink: After connecting via USB, you may be prompted to install an APP. After installation, reconnect the data cable to enter screen mirroring mode. You can operate from both the player screen and the phone screen. Sound is transmitted via Bluetooth connection.

GPS Navigation

Utilize real-time road conditions to avoid traffic jams and precise satellite positioning to prevent getting lost. Supports offline map navigation (manual download required).

GPS Navigation Function

Image showing the car radio display with a Google Maps navigation interface and a music player widget.

FM/RDS Radio

Supports FM/RDS radio tuning with automatic or manual station search and storage.

FM/RDS Radio Interface

Image displaying the car radio's FM/RDS interface with frequency display and preset buttons.

Bluetooth Function

Connect your phone via Bluetooth for hands-free calls, Bluetooth music playback, phone book download, and call records.

Speaker and Music Player via Bluetooth

Image showing a driver using the car radio for Bluetooth music playback, with steering wheel controls.

Video Playback

The unit supports 1080P HD video playback from USB flash drives.

Video HD Playback

Image showing the car radio displaying a high-definition video.

Digital Sound Processor (DSP)

The DSP feature allows for advanced audio customization, including equalizer settings, surround sound, and subwoofer control.

Video demonstrating CarPlay, Android Auto, video playback, and DSP settings on the car radio.

Maintenance

To ensure the longevity and optimal performance of your GEARELEC Car Radio, follow these simple maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents.
  • Software Updates: Periodically check for software updates to ensure you have the latest features and bug fixes. Refer to the 'Settings' menu on your device for update options.
  • Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or high humidity.
  • Cable Connections: Ensure all cables are securely connected. Loose connections can lead to intermittent issues.

Troubleshooting

1) Cannot boot normally

  • Wiring Check: Ensure the yellow (positive), red (ignition), and black (negative) wires are correctly connected. Incorrect or incomplete connections will prevent booting.
  • Original Car Wiring: Do not connect the unit directly to non-standard original car wiring colors, as this may cause damage.
  • Fuse Check: If the unit doesn't boot, check the fuse on the yellow line. If the fuse is intact, twist the yellow and red wires together, turn the key, and press the power button.
  • Repeated Fuse Blowing: If the fuse blows repeatedly, it indicates a short circuit in the unit's protection circuit. Seek professional repair.
  • Final Check: If all else fails, connect the yellow and red wires to a 12V battery's positive terminal and the black wire to the negative terminal. If it boots, the original car wiring is faulty. If not, the unit is broken.

2) Automatic shut-down

  • Cable Error: If the blue cable (automatic antenna power supply) is connected to the unit's power cable, it will automatically shut down. Correct the wiring.
  • Unstable Voltage: Test with a stable 12V-5A power supply. If it still shuts down, the unit has a problem.

3) There is noise

  • Speaker Power: If the original speaker power is too low, noise may occur at high volumes. Do not set the volume too high.
  • Speaker Cable Grounded: Connect the iron speaker cable directly to the unit's speaker cable.

4) Remote control cannot be used

  • Test Method: Use your phone camera to view the remote control's light while pressing buttons. If the light doesn't flash, replace the battery. If it flashes, the remote control is functional.

5) Settings cannot be saved (no memory)

  • Wiring Check: Ensure the yellow and red lines are connected correctly (yellow to positive, red to key control).
  • Reversed Wires: If yellow and red wires are reversed, simply switch their positions.

6) Bluetooth not working

  • Turn on the machine, search for its Bluetooth name on your mobile phone, and click 'Connect'. After connecting, you should be able to make calls and play music.

7) The product emits smoke

  • Replace the fuse. If the problem persists, the internal circuit is burned. After-sales service is required.

8) The sound cannot be adjusted

  • Reset the unit or unplug and replug the power cord.
  • If the volume knob is broken, it needs to be replaced.

9) Reversing camera does not display

  • Wiring: Check for wrong or missing wiring.
  • Camera Fault: If the camera's light doesn't turn on when properly wired, the camera is broken and needs replacement.

10) USB devices cannot be played

  • Format the USB flash drive to FAT32. Re-download songs and try again. If it still doesn't work, replace the USB flash drive.

11) FM does not receive the radio station

  • Antenna Connection: Ensure the antenna plug is fully inserted and not disconnected.
  • Station Search: Use the 'AS' button for automatic search or manual search buttons. If issues persist, unplug the antenna and try inserting a screwdriver or metal strip as a temporary antenna.

12) No sound immediately after installation

  • Wiring Error/Short Circuit: Check if speaker cables are short-circuited or incorrectly connected. Reconnect if necessary.
  • Speaker Cable Count: If your original car has only 2 speaker cables but the unit requires 4, you may need to re-route the original car line.

13) No sound after a while

  • Disconnect all speaker cables from the unit (do not remove them from the unit itself). Connect an external speaker to the gray and purple wires of the tail line. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is broken.

Specifications

FeatureSpecification
SystemAndroid 14
Screen Size7 inches
Display Resolution1024x600
RAM4 GB
ROM64 GB
Chipset4 core
Processor Speed1.3GHz
Processor TypeA53 Quad-core
Power Supply Voltage12~14.4V DC (Negative Ground)
Max Current Consumption10A
Max Output Power4x60W
Operating Temperature-10~60℃
Bluetooth Version5.1 (Default Name: SWL-BT)
Wi-Fi Frequency2.4GHz/5GHz
GPS SignalBeidou/GPS/GLONASS
Radio FrequencyFM 87.5~108.0MHz
Tuner TypeYD7388
Radio IC6625
Button BacklightSeven-color LED (manual or auto cycle)
CarPlay FunctionalityWired and Wireless connections
Android Auto FunctionWired and Wireless connections
Screen MirroringWired and Wireless (Android and Apple phones)
Reversing Camera SupportAHD and CVBS format cameras (optional)
Steering Wheel ControlsSupports button learning
Video OutputNot supported
Audio Input2 channels (L+R)
Audio Output2 channels (L+R)
Video Input2 channels
Reversing Video Input1 channel
Subwoofer Output1 channel
Audio FormatsMP3/WMA/WAV/APE/FLAC/AAC/OGG/RM
Video FormatsMPEG/AVI/RM/FLV/ASF/WMV/MP4/MKV/OGM/TS/DivX/RMVB/VOB
Image FormatsJPG/BMP/PNG/JPEG/GIF
Factory Password000000
OSD LanguageChinese (Simplified), Chinese (Traditional), Arabic, Irish, Estonian, Belarusian, Bulgarian, Polish, Danish, German, Russian, French, Finnish, Korean, Dutch, Czech, Latvian, Romanian, Malay, Portuguese, Japanese, Slovak, Slovenian, Thai, Turkish, Ukrainian, Greek, Spanish, Hungarian, Armenian, Italian, Indonesian, English, Vietnamese

Applicable Models

This car radio is compatible with various Volkswagen, Skoda, and Seat models. Please verify your specific car model and year against the lists below:

For VW

  • Amarok (2010-2013)
  • Caddy (2003-2013)
  • Golf V (2003-2008)
  • Golf VI (2008-2013)
  • Golf Plus (2003-2013)
  • Golf Cabriolet (2011-2013)
  • Golf Wagon (2010-2013)
  • Golf GTI (2010-2012)
  • Golf R (2010-2013)
  • Golf Estate (2009-2012)
  • Passat (2005-2013)
  • Passat Estate (2005-2013)
  • Passat cC (2008-2013)
  • Jetta (2005, 2007-2013)
  • Jetta GLI (2006-2013)
  • Touran (2003-2013)
  • Tiguan (2007-2013)
  • Sharan (2010-2013)
  • Scirocco (2008-2013)
  • EOS (2006-2013)
  • WT5 Transporter (2010-2014)
  • Polo (2009-2013)
  • Polo Sedan (2012-2013)
  • Polo V 6R (2009-2013)
  • New Beetle 2 (2011-2013)
  • Rabbit (2007-2013)
  • T5 Transporter (2010-2013)
  • WT5 Caravelle 2010 Multivan T5 (2010-2013)
  • Beetle (2011-2013)

For Skoda

  • Octavia Limousine (2004-2006)
  • Octavia (2009-2012)
  • Roomster (2006-2010)
  • Fabia Limousine (2004-2008)
  • Octavia II III (to 2010)
  • Yeti (2009-2015)
  • Patrick (2004-2008)
  • Octavia Combi (2004-2006)
  • Superb (2008-2013)
  • Fabia (2011-2013)

For Seat

  • Altea (2004, 2005, 2007-2012)
  • Altea XL (2007-2013)
  • Leon (2006-2013)
  • Toledo (2004-2015)
  • Alhambra (2010-2016)
Adaptable Vehicle List 1

Image showing a list of compatible Volkswagen, Seat, and Skoda vehicle models.

Adaptable Vehicle List 2

Another image showing a list of compatible Volkswagen, Skoda, and Seat vehicle models, including specific years.

Important Fitment Note: If your original car radio has the connector shown in the picture (common in 2014 and later models), please contact the seller to purchase an additional plug-and-play wiring harness.

Car Radio Connector Compatibility Check

Image showing various car radio models and a specific connector type, advising users to check their original car radio for compatibility and potential need for an additional wiring harness.

Package Contents

The product package typically includes:

  • 1x Main Unit
  • 1x GPS Antenna
  • 1x Instruction Manual
  • 1x Reversing Camera Input Cable
  • 1x 20PIN RCA Audio Cable
  • 1x 6PIN USB Extension Cable
  • 2x Plug and Play Power Cables
  • 1x CANbus Protocol Box
  • 1x FM Radio Adapter Cable
Packing List Contents

Image showing the main unit, various cables, GPS antenna, CANbus box, and instruction manual included in the package.

User Tips

  • Installation Ease: Many users report easy installation, often taking around 10 minutes with the provided plugs, especially for models like the Passat B6, Polo 6R (2011), and Golf 5 (2006).
  • Antenna Adapter: For some models, like the Volkswagen Golf 6 (2011), an additional adapter for the radio antenna amplifier might be needed for optimal performance, especially outside city areas.
  • Offline Maps: Remember to manually download offline maps for your region after installation.
  • Fitment: While compatible with many models, some users have reported fitment issues with certain Skoda Octavia models, finding the radio too small. Always double-check dimensions and specific car model compatibility.
  • Radio Signal: A few users have noted that the radio signal may weaken when the volume is turned up to maximum.

Frequently Asked Questions (FAQ)

Q: Does this radio support parking sensors?
A: Yes, some models support a 360 panoramic camera, which can display distance sensors.
Q: Does the hands-free system work?
A: Yes, the Bluetooth function supports hands-free calls.
Q: Is Bulgarian language available?
A: Yes, the device supports a wide range of OSD languages, including Bulgarian.
Q: What is the factory settings password for this Android car stereo?
A: The factory password is 000000.
Q: The menu keeps switching back to the heating control. How do I turn that off?
A: This issue might be related to CANBUS integration or specific car settings. Please review your wiring and CANBUS protocol box settings. If the problem persists, consult the troubleshooting section or contact support.
Q: Are the dimensions compatible with Amundsen?
A: The unit is designed to fit various VW models, including those that might have originally come with an Amundsen system. Please check the detailed compatibility list in the specifications section for your specific vehicle model and year.
Q: Is this compatible with a 2003 Touran?
A: Yes, the compatibility list includes Touran models from 2003-2013.

© 2024 GEARELEC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.