1. Introduction
Thank you for purchasing the GEARELEC 7 Inch Car Radio. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance and a safe user experience. Please read this manual thoroughly before using the product.
2. Safety Precautions
To prevent injury or fire, please observe the following precautions:
- Do not stare at the product's display screen for extended periods while driving.
- Do not install or operate the product with wet hands.
- Do not install the product in environments characterized by high temperatures, high humidity, or the presence of flammable or explosive gases or liquids.
- Avoid severe vibration, impact from metal objects, or the ingress of water into the unit, as these may cause damage.
- Do not install the product in a location that obstructs the driver's view or compromises driving safety.
- Do not install the product on an airbag cover or within the deployment zone of an airbag.
- Do not subject the product to voltages exceeding its rated voltage (12-14.4V DC).
- Do not use non-original cables or accessories.
- Do not attempt to disassemble, repair, or modify the product or its accessories yourself.
3. Setup and Installation
Before installation, please test the unit first. After receiving the product, do not install it directly into the car, as long-distance transportation may have affected its functionality.
3.1. Rear Interface Description
Familiarize yourself with the rear ports and their functions before connecting. The diagram below illustrates the various connections.

3.2. Universal Power Cord Wiring Instructions
The universal machine power cord is a loose wire. You need to identify the wires corresponding to each function, connect them together, and wrap them with insulating tape.

Use a multimeter or 12V tester to measure the original vehicle wiring harness:
- When the key is on "LOCK", a line is 12V (Battery +).
- When the key is on "ACC", a line is 12V. When the key is on "LOCK", this line becomes 0V (ACC line).
- When the headlights are turned on, a line is 12V. When the lights are turned off, this line becomes 0V (ILL line).
3.3. Special Vehicle Power Cord
For special cars, the power cord tail is a socket. Simply plug it into the original car plug. If a CANBUS protocol box is included, it needs to connect to the 8-pin position of the host.
3.4. Reversing Camera Installation Method
Connect the reversing camera as shown in the diagram. Note that some models may require manual resolution settings for proper display.

3.5. Learning Steering Wheel Controls
To configure steering wheel buttons:

4. Operating Instructions
The GEARELEC car radio offers a wide range of features for an enhanced driving experience.
4.1. Key Features Overview
- Radio (FM): Enjoy FM radio with RDS function for real-time traffic information.
- USB Playback: Supports USB flash drive reading for audio, video, and images (max 64GB, purchased separately).
- Audio Input: AUX audio input function (front 3.5mm).
- Bluetooth: Hands-free calling and Bluetooth music streaming (Bluetooth 5.1).
- Rearview Camera: Supports rearview camera input (480P/720P/1080P, camera optional).
- Video Input: 2 channels of video input.
- Steering Wheel Controls: Supports original car steering wheel button learning.
- Dashcam: Can install Android dashcam (USB dashcam supported, dashcam optional).
- Wi-Fi Internet: Get online easily anytime, anywhere (2.4G/5.0G 802.11 b/g/n).
- GPS Navigation: Built-in GPS navigation with support for Beidou/GPS/GLONASS signals and offline maps.
- App Installation: Ability to install various Android applications.
- CarPlay & Android Auto: Supports wired and wireless Apple CarPlay and Android Auto functions.
- External Microphone: External microphone support (optional).
- USB Charging: Front USB charging function.
- Seven-color Button Light: Customizable multi-color panel lights.
4.2. User Interface and Navigation

The system runs on Android 14, providing a familiar and intuitive interface. Navigate through apps, settings, and media using the HD touch screen.
4.3. CarPlay and Android Auto
The unit supports both wired and wireless Apple CarPlay and Android Auto. This allows seamless integration with your smartphone for navigation, music, calls, and messages.

Wired Connection: Connect your phone via a USB data cable to automatically enter the CarPlay/Android Auto interface.
Wireless Connection: Enable Bluetooth and Wi-Fi on your phone, then connect to the unit's Bluetooth. The system will automatically enter the CarPlay/Android Auto interface. Note that the signal is transmitted via Wi-Fi for wireless connections.
4.4. Mirrorlink (iPhone & Android)
Mirrorlink allows you to project your phone screen onto the car radio display. For iPhone, the content is projected, but touch input is not supported on the car screen. For Android devices, after connecting via USB and installing the APP, you can operate from both the player screen and the phone screen. Sound is transmitted after Bluetooth connection.
4.5. GPS Navigation
Utilize the built-in GPS for accurate satellite positioning and real-time road conditions to avoid traffic jams. Supports offline maps.

4.6. Audio and Sound Settings
The unit features EQ adjustment with various surround sound field modes for strong bass, soft midrange, and bright treble. DSP and ASP sound effect adjustments are also supported.


4.7. FM/RDS Radio
Enjoy online music transmitted through the car stereo via FM, with support for RDS function for clear channel search and low noise.

4.8. Customizable Panel Lights
The unit features 7 kinds of key light color cycle changes, or you can select a certain color to match your car's interior.

4.9. Video Playback
Experience high-definition video playback for a fine and smooth visual experience.

4.10. Product Demonstration Video
5. Maintenance
To ensure the longevity and optimal performance of your GEARELEC car radio, follow these general maintenance guidelines:
- Cleaning the Screen: Use a soft, lint-free cloth to gently wipe the screen. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaner. Avoid harsh chemicals or abrasive materials.
- Cleaning the Unit: Wipe the exterior of the unit with a soft, dry cloth. Do not use liquid cleaners directly on the unit.
- Temperature: Avoid exposing the unit to extreme temperatures, both hot and cold, for extended periods.
- Moisture: Keep the unit dry. Avoid contact with water or other liquids.
- Ventilation: Ensure that the unit's ventilation openings are not blocked to prevent overheating.
6. Troubleshooting
This section addresses common issues you might encounter and provides solutions.
6.1. Cannot Boot Normally
- Wiring Issues: Ensure the yellow wire is connected to the positive pole, the red wire to the key control line, and the black wire to the negative pole. Incorrect connections will prevent booting.
- Original Car Line Incompatibility: If the original car line colors do not match the unit's wiring, connecting them directly may cause damage.
- Fuse Blown: Check if the fuse on the yellow line is broken. If not, twist the yellow and red wires together, turn on the key, and press the unit’s power button to test.
- Short Circuit Protection: If the fuse repeatedly blows, it indicates a short circuit in the unit's protection circuit. Seek professional guidance for repair.
6.2. Automatic Shut-down
- Cable Error: If the blue cable (automatic antenna power supply) is connected to the unit's power cable, it will automatically shut down. Correct the wiring.
- Unstable Voltage: Test with a stable 12V-5A power supply. If it still shuts down, the unit may be faulty.
6.3. Noise Issues
- Low Speaker Power: If noise occurs at high volumes, the original speaker power may be too low. Adjust volume accordingly.
- Grounded Speaker Cable: Connect the iron speaker cable directly to the unit's speaker cable.
6.4. Remote Control Not Working
Test the remote by pointing it at a mobile phone camera and pressing a button. If the phone screen lights up, the remote is working. If not, replace the battery.
6.5. Settings Not Saved (No Memory)
- Incorrect Wiring: Ensure the yellow and red lines are connected correctly (yellow to positive, red to key control).
- Reversed Wires: If yellow and red wires are reversed, simply switch their positions.
6.6. Bluetooth Not Working
Turn on the unit, search for its Bluetooth name on your mobile phone, and click Connect. After connecting, you should be able to make calls and play music.
6.7. Product Emits Smoke
Replace the FUSE. If the problem persists, the internal circuit may be burned. After-sales service is required.
6.8. Sound Cannot Be Adjusted
- Reset Unit: Reset the unit or unplug and replug the power cord.
- Volume Knob Faulty: If the volume knob is broken, it can be replaced.
6.9. Reversing Camera Does Not Display
- Incorrect/Missing Wiring: Refer to the reversing camera installation method in Section 3.4.
- Broken Camera: If the camera's light does not illuminate when properly wired, the camera is likely broken and needs replacement.
6.10. USB Devices Cannot Be Played
Format the USB flash drive to FAT32. Re-download songs and try again. If the issue persists, replace the USB flash drive.
6.11. FM Radio Station Not Received
- Antenna Connection: Ensure the antenna plug is fully inserted and the antenna/line is not disconnected.
- Station Search: Use the AS button for automatic search or the 'before'/'after' buttons for manual tuning. If issues persist, unplug the antenna and try inserting a screwdriver or metal strip into the antenna port.
6.12. No Sound After Installation
- Speaker Cable Short Circuit: Check if the speaker cable is short-circuited and reconnect if necessary.
- Speaker Cable Mismatch: If your original car has only 2 speaker cables, but the unit requires 4, you may need to re-route the original car line. One speaker requires two cables; two speakers require four cables.
6.13. No Sound After A While
Disconnect all speaker cables from the unit (do not remove them). Connect an external speaker to the gray and purple wires of the unit's tail line. If there is sound, the car's speaker line is short-circuited or the speaker is damaged. If there is no sound, the unit is broken.
7. Specifications
| Feature | Specification |
|---|---|
| Type | 2 DIN |
| Screen Type | IPS |
| Screen Size | 7 Inches |
| Screen Resolution | 1024x600 |
| Operating System | Android 14 |
| CPU | UIS8141E 1.3GHz x 4 (4-Core A53) |
| RAM | 4 GB |
| Storage (ROM) | 64 GB |
| Radio Frequency | FM 87.5~108.0MHz (Switchable regions) |
| Radio IC | QN8035 |
| Amplifier IC | YD7388 |
| Output Power | 60W x 4 |
| Operating Voltage | DC 8~16.5V (12V nominal) |
| Operating Temperature | -30~75℃ |
| Bluetooth Version | 5.1 |
| Wi-Fi Frequency | 2.4G/5.0G 802.11 b/g/n |
| GPS Signal | Beidou/GPS/GLONASS |
| Panel Lights | Multi-color lights (7 colors) |
| CarPlay Function | Supported (wired and wireless) |
| Android Auto Functions | Supported (wired and wireless) |
| Reversing Camera | Supported (480P/720P/1080P, camera optional) |
| Steering Wheel Controls | Supports button learning |
| Video Output | Not supported |
| Offline Maps | Supported |
| Dashcam | Supported (USB dashcam, optional) |
| USB Interface | Front USB 2.0 + Rear USB 2.0 (6P) + Front USB Charging |
| AUX Interface | Front AUX audio input (3.5mm) |
| Reset Button | Supported |
| Audio Output | 2 channels (left + right) |
| Audio Input | 2 channels (left + right) |
| Video Input | 2 channels |
| Subwoofer Output | 1 channel |
| Reversing Video Input | 1 channel |
| Audio Formats | mp3, AAC, AMR, AMR WB, PCM/ADPCM, Ops, MID Flac, Vorbis, MID, AAC LC, HE-AACv1, HE-AACv2, .m4a, .amr, .wav, .opus, .mid, .flac |
| Video Formats | MPEG/AVI/RM/FLV/ASF/WMV/MP4/MKV/OGM/TS/DivX/RMVB/VOB |
| Image Formats | JPG/BMP/PNG/JPEG/GIF |
| Factory Setup Password | 3368 |
| Languages | Chinese/Traditional Chinese/English/Russian/Greek/Polish/Turkish/Arabic/Persian/Romanian/French/Hungarian/Italian/Thai/German/Ukrainian/Spanish/Portuguese/Czech/Vietnamese/Japanese/Malaysian/Dutch/Indonesian/Korean |
7.1. Product Dimensions

8. User Tips
- ISO Adapter: The unit may not include a standard EURO ISO audio connector. You might need to purchase one separately for your vehicle.
- CarPlay Setup: While CarPlay setup can be complex, the wireless connection is generally fluid and responsive once configured.
- Volume Knob: Some users report a slight delay when quickly adjusting the volume knob.
- Mounting Frame: The unit does not typically include a mounting frame. You may need to purchase one separately to ensure a proper and aesthetic fit in your car's dashboard.
- External Microphone: If you experience poor microphone performance during calls, especially with car noise, consider installing an optional external microphone.
9. Warranty and Support
For detailed warranty information and support, please refer to the official user manual PDF available online. This document contains comprehensive guides and troubleshooting steps.
Official User Manual (PDF): A detailed user manual in PDF format is available for download. It contains additional information on installation, operation, and advanced features. You can access it via the following link: GEARELEC Car Radio User Manual (PDF)