GEARELEC C2

Contents

GEARELEC C2 Motorcycle Helmet Bluetooth Intercom Headset

User Manual

Introduction

Thank you for choosing the GEARELEC C2 Motorcycle Helmet Bluetooth Intercom Headset. This device is designed to enhance your riding experience by providing wireless communication, music playback, and call management capabilities directly within your helmet. Featuring Bluetooth 5.3, IPX7 waterproofing, and a 2800mAh battery, the C2 offers reliable performance for solo rides or communication with a passenger.

GEARELEC C2 Intercom with key specifications

Image: GEARELEC C2 Intercom highlighting Bluetooth 5.3, 7 Colors, 2800mAh battery, 500 hours standby time, 50m intercom distance, and 2-rider full-duplex connection.

Package Contents

Please check the package to ensure all items are present:

  • 1 x GEARELEC C2 Intercom Main Unit
  • 1 Set x Speakers
  • 1 x Hard Microphone
  • 1 x Soft Microphone
  • 1 x Mounting Clamp
  • 1 x Adhesive Mount
  • 4 x Speaker Fasteners (Velcro pads)
  • 2 x Mic Fasteners (Velcro pads)
  • 1 x USB-C Cable
  • 2 x Adhesive Mount Fasteners
  • 1 x User Manual

Note: Some packages may include two intercom units for a 2-rider setup. Please verify your specific purchase.

Contents of the GEARELEC C2 package

Image: Visual representation of the package contents including the main unit, speakers, microphones, mounting accessories, USB cable, and manual.

Specifications

Feature Specification
Bluetooth Version 5.3
Maximum Intercom Distance 50 meters (2-rider full-duplex)
Bluetooth Transmission Distance (to phone) 10 meters
Battery Capacity 3.7V/2800mAh Polymer Battery
Working Hours Up to 170 hours
Music Playback Battery Life Approx. 70 hours (at maximum volume)
Standby Time 1,000 hours
Fast Charging Time 3 hours
Waterproof Level IPX7
Charging Port USB Type-C
Charging Voltage USB 5V 1A-2A
Music Equalization Pretuned
Working Temperature -55°C to +125°C
Material ABS
Color Black
Product Size 9.5cm x 5cm x 2cm (3.74" x 1.97" x 0.79")
Product Weight 143.7g
Special Features Waterproof, Voice Control, Universal Pairing Function, Noise Reduction, Built-in Colorful Lights
GEARELEC C2 with 2800mAh battery capacity indicator

Image: Illustration of the 2800mAh battery capacity of the GEARELEC C2 intercom.

Setup Guide

1. Charging the Device

  1. Connect the provided USB-C cable to the charging port on the GEARELEC C2 unit.
  2. Connect the other end of the USB-C cable to a USB 5V 1A-2A power adapter (not included).
  3. The device will indicate charging status (e.g., an LED light).
  4. A full charge takes approximately 3 hours.
GEARELEC C2 unit showing 7 color light options

Image: The GEARELEC C2 unit displaying its 7-color light options.

2. Installing the Intercom Unit on Your Helmet

Choose between the mounting clamp or adhesive mount based on your helmet type and preference.

Using the Mounting Clamp:

  1. Loosen the screws on the mounting clamp.
  2. Slide the clamp between the outer shell and the inner padding of your helmet, typically on the left side.
  3. Position the clamp securely and tighten the screws.
  4. Slide the GEARELEC C2 main unit onto the clamp until it clicks into place.

Using the Adhesive Mount:

  1. Clean the desired mounting area on the side of your helmet thoroughly.
  2. Peel off the protective film from one side of an adhesive mount fastener.
  3. Attach the adhesive mount fastener firmly to the helmet surface.
  4. Attach the adhesive mount to the fastener.
  5. Peel off the protective film from the other side of the adhesive mount fastener and attach it to the back of the GEARELEC C2 main unit.
  6. Press the intercom unit firmly onto the adhesive mount on the helmet.

3. Installing Speakers and Microphone

The C2 comes with both a hard microphone (for open-face helmets) and a soft microphone (for full-face helmets). Choose the appropriate microphone for your helmet.

  1. Attach the speaker fasteners (Velcro pads) inside your helmet, aligning them with your ears.
  2. Press the speakers firmly onto the Velcro pads. Ensure the speakers are positioned directly over your ears for optimal sound quality.
  3. Attach the mic fasteners (Velcro pads) inside the helmet near your mouth.
  4. Connect your chosen microphone (hard or soft) to the intercom unit's microphone port.
  5. Position the microphone so it is close to your mouth but not obstructing your vision or comfort.

4. Bluetooth Pairing with Your Phone

  1. Ensure the GEARELEC C2 unit is powered off.
  2. Press and hold the Power button (usually the 'M' button or a dedicated power button) for approximately 5-7 seconds until the LED indicator flashes rapidly, indicating pairing mode.
  3. On your mobile phone, go to Bluetooth settings and search for new devices.
  4. Select "GEARELEC C2" from the list of available devices.
  5. Once connected, the LED indicator on the C2 unit will change to a slow flash or solid light, depending on the model.

5. Intercom Pairing (for 2-Rider Communication)

If you have two GEARELEC C2 units and wish to use the intercom function:

  1. Ensure both C2 units are powered off.
  2. On both units, press and hold the Intercom button (refer to your manual for exact button identification, often a dedicated intercom button or a combination).
  3. Hold until both units enter intercom pairing mode (LEDs may flash differently than phone pairing).
  4. Once paired, the units will indicate a successful connection, and you can begin intercom communication.
Two riders communicating using GEARELEC C2 intercoms

Image: Two riders on a motorcycle, demonstrating the 50m intercom communication feature of the GEARELEC C2.

Operating Instructions

Power On/Off

  • Power On: Press and hold the Power button (often 'M') for approximately 3 seconds until you hear a power-on tone and the LED lights up.
  • Power Off: Press and hold the Power button for approximately 3-5 seconds until you hear a power-off tone and the LED turns off.

Music Playback

Once paired with your phone, you can stream music directly to your headset.

  • Play/Pause: Short press the Multi-function button (often 'M').
  • Next Track: Short press the Volume Up button.
  • Previous Track: Short press the Volume Down button.
  • Volume Adjustment: Long press the Volume Up or Volume Down button.
Woman enjoying Hi-Fi stereo music through her helmet intercom

Image: A woman wearing a helmet and listening to music, illustrating the Hi-Fi Stereo Music feature.

Call Management

The C2 supports both automatic and manual call answering.

  • Auto-Answer: The device will automatically answer incoming calls after a few rings (typically 3-5 seconds) if enabled. It will prompt the caller number before answering.
  • Manual Answer: Short press the Multi-function button to answer an incoming call.
  • Reject Call: Press and hold the Multi-function button for 3 seconds to reject an incoming call.
  • End Call: Short press the Multi-function button during a call.
Motorcyclist receiving a call, showing auto and manual answer options

Image: A motorcyclist on the road with an overlay showing options for auto or manual call answering.

Voice Assistant Activation

Activate your phone's voice assistant (e.g., Siri, Google Assistant) directly from the C2 unit.

  • Activate Voice Assistant: Double-press the Multi-function button.
Motorcyclist using voice commands to activate phone assistant

Image: A motorcyclist interacting with a voice assistant, demonstrating the voice control feature.

Intercom Usage

For 2-rider communication within a 50-meter range.

  • Start/End Intercom: Short press the Intercom button (if available) or a designated button combination.
  • Talk & Listen to Music Simultaneously: The C2 allows you to maintain intercom communication while background music continues to play.

Colorful Lights

The C2 features built-in colorful lights for personalization.

  • Switch Light Modes: Short press the Light button (refer to your manual for exact button identification) to cycle through orange, green, white, and multi-color modes.

Maintenance

  • Cleaning: Use a soft, damp cloth to clean the exterior of the intercom unit. Do not use harsh chemicals or abrasive cleaners.
  • Waterproofing: The device is IPX7 waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. It is suitable for riding in the rain. However, avoid prolonged submersion or high-pressure water jets. Ensure the USB-C port cover is securely closed when not charging.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Charge the device regularly, especially if storing it for extended periods.

Troubleshooting

  • Device not powering on: Ensure the battery is charged. Connect to a power source and try again.
  • Cannot pair with phone:
    • Ensure the C2 is in pairing mode (rapidly flashing LED).
    • Turn off and on your phone's Bluetooth.
    • Forget the device from your phone's Bluetooth list and try pairing again.
    • Ensure the C2 is within 10 meters of your phone.
  • No sound from speakers:
    • Check if the speakers are properly connected to the intercom unit.
    • Adjust the volume on both the C2 unit and your phone.
    • Ensure the device is connected via Bluetooth.
  • Intercom not connecting:
    • Ensure both C2 units are in intercom pairing mode.
    • Make sure both units are within the 50-meter intercom range.
    • Try resetting both units and attempting to pair again.
  • Poor intercom range: Environmental factors (e.g., buildings, dense foliage, other electronic interference) can affect intercom range. Try to maintain a clear line of sight between units for best performance.

User Tips

  • Optimal Sound: Position the speakers directly over your ears inside the helmet for the best audio experience, especially for Hi-Fi stereo music.
  • Microphone Placement: Ensure the microphone is close to your mouth to maximize voice clarity and minimize wind noise, particularly when using the hard mic.
  • Intercom Range: While rated for 50 meters, real-world intercom range can be affected by obstacles and terrain. For consistent communication, try to stay within closer proximity, especially in urban or hilly areas.
  • Easy Connection: Users have noted the product is easy to connect, so if you encounter issues, a simple restart of both the headset and your phone often resolves them.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official GEARELEC website or contact the retailer where you purchased the product. Keep your purchase receipt as proof of purchase.

© 2024 GEARELEC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.