GEARELEC F1 Motorcycle Helmet Wireless Headset

1. Feature

• Intelligent noise reduction chip technology
• Hi-Fi stereo sounds
• IP65 waterproof level
• 850 mAh battery
• Can be used while charging
• Supports answering phone calls, listening to music, and GPS voice navigation
• Supports auto-answer and last number redial
• Supports activating your phone's voice assistant
• 3 types of EQ sound effect adjustment, adaptable to different music styles
• 50mm large field speakers with tuned diaphragms for a more immersive and enjoyable music world
• Supports connecting to two phones at the same time

2. Package Contents

The package includes:

• Boom mic
• Wired mic
• Clamp x1
• Adhesive mounting plate x1
• Speaker fastener x4
• USB-C cable x1
• Mic fastener x2
• Manual x1

3. Installation Instructions

1. Route the speaker cable through the top or bottom edge of the helmet liners.
2. Apply the loop fasteners on the ear positions inside the helmet.
3. Attach the speakers onto the loop fasteners and organize the liners.
4. Install the clamp or the adhesive mounting plate on the left side of the helmet.
5. Slide down the headset into the mounting slot. Plug in the speakers & mic cable to the end.
6. Adjust the mic to the desired position, and the installation is complete.

Two mounting options:

The headset comes with 2 kinds of mounts:

• Clamp
• Adhesive Mounting Plate

(This headset is compatible with most full-face/half-face/flip-up motorcycle helmets.)

4. Product Overview

The headset has the following components:

• Volume up/Next song button
• Volume down/Previous song button
• Power on/off button
• USB Type-C charging port
• LED indicator
• USB Type-C speaker & mic port

5. How to Use

5.1 Basic Function

5.2 BT Function

Note:

• If F1 has been paired with a device before, it will automatically connect to the device (BT enabled) when you reboot it.
• If F1 is connected to the device, blue lights will flash slowly. To connect F1 to other devices, please turn off the BT of the connected device or leave the connection range from the connected device.
• If connection fails repeatedly, please reboot the phone and headset and try again.

5.3 Phone Calling Function

Note:

• When there is an incoming phone call and no operation for 10 seconds, the headset will automatically answer the incoming call (when auto-answer is enabled).
• Auto-answer is enabled by default.

5.4 Music Function

Note:

• If there is no operation after turning F1 on, it will automatically shut down after 15 minutes.
• After F1 and a BT device are paired successfully, they will automatically re-connect to each other if you reboot F1.

6. Specifications

7. Precaution

1. Before using the BT headset, please use the provided charging cable to charge it.
2. Keep the product away from sharp objects to avoid scratches or damage.
3. Do not expose the product to open flames to avoid the risk of explosion.
4. Do not attempt to disassemble the product to avoid product damage.
5. If the product is not used for a long time, please store it in a dry place and charge it regularly (once a month) to ensure it can work properly.
6. If there are no sounds from the speakers, fully plug in the speaker & mic cable and turn up the volume of F1 and your phone.
7. If others cannot hear you, fully plug in the speaker & mic cable and mic cable and keep the mic close enough to your mouth when talking.