Aprilboy specializes in high-quality vehicle surveillance technology, offering a range of 4K dual dash cams, mirror dash cameras, and smart driving assistants.
Aprilboy is a consumer electronics brand focused on automotive safety and surveillance products. The company designs and manufactures a variety of high-resolution dash cameras, including 12-inch mirror dash cams, 3-channel systems, and traditional front-and-rear dual setups.
Known for advanced features such as 4K ultra-HD recording, super night vision, and Advanced Driver-Assistance Systems (ADAS), Aprilboy products are built to enhance daily driving security. Their line of dash cameras typically supports modern connectivity options like 5.8GHz WiFi, app-based mobile control, and 24-hour parking monitoring, ensuring comprehensive vehicle protection and peace of mind for drivers.
Latest manuals from manuals+ curated for this brand.
Watch setup, installation, and troubleshooting videos for this brand.
Common questions about manuals, registration, and support for this brand.
Check the power cord connection first. If it is securely connected but the camera still won't power on, leave the device to charge for more than 20 minutes, then long-press the power button to start it.
Make sure you have removed the original protective film from the camera lens. Additionally, verify that both the camera lens and the vehicle's windshield are clean and free of dirt or grease.
The dash cam features a loop recording function that automatically overwrites the oldest unlocked videos once the SD card storage is full. Locked emergency videos (triggered by the G-sensor) are protected and will not be overwritten.
Format the SD card within the dash cam's menu and reboot the device. Ensure you are using a high-speed Class 10 or higher micro SD card (64GB to 256GB). If the issue persists, try replacing the memory card.
The sensitivity of the G-sensor is likely set too high, causing it to react to standard road vibrations. You can connect your phone via the dash cam app and lower the G-sensor sensitivity to prevent standard clips from continuously locking.