Introduction
Thank you for choosing the Aprilboy 12-Inch 4K Mirror Dash Cam. This manual provides detailed instructions for the installation, operation, and maintenance of your device. Please read this guide thoroughly before use and keep it for future reference to ensure proper functionality and safety.
For additional resources, including a downloadable PDF version of this manual, please refer to the User manual (PDF).
1. Camera Overview
Familiarize yourself with the components of your Aprilboy Mirror Dash Cam:

Top View: TYPE-C port, AV TF (AV-In/TF Card Slot), GPS port.
Front View: Touch Screen, Speaker, Reset button, Front Camera.
Bottom View: Mic Power, Mic Saver, Button/Screen.
The dash cam features a 12-inch IPS Touch Screen, a 4K image sensor, and supports various functions including WiFi, GPS, and Night Vision. It is designed to be fitted over your existing rear-view mirror using straps.
2. Setup and Installation
2.1 Important Warnings and Notices
- ALWAYS connect all cameras and wires BEFORE powering on the Mirror Screen. Failure to do so may prevent the camera from working properly.
- Keep away from driving operations and active car parts to avoid interference.
- When drilling holes for installation, ensure you do not damage any vehicle components like vibrators, tanks, or wires.
- Before attaching double-sided tape, clean the surface with alcohol to remove stains or oil.
- If the ambient temperature is low, warm up the mounting surface with a dryer to improve adhesion.
- The provided 3M sticker is not reusable; its adhesion will weaken if removed.
- Do not disassemble or modify any part of this product. Unauthorized modifications will void the warranty.
- Professional installation is recommended to avoid short circuits, car battery damage, or interior damage due to improper operation. The company is not liable for issues caused by installation errors.
- The product's performance relies on the reliability of the automobile power supply and battery. The company is not liable for performance issues not related to product quality.
2.2 MicroSD Card Installation and Formatting
Your dash cam supports microSD cards up to 256GB, Class 10 or above. A U3 card is highly recommended.
- Format on Computer: First, format the microSD card on your computer to ensure compatibility.
- Insert MicroSD Card: Insert the microSD card into the mirror dash cam. Push it in until it clicks into place. A second push will release it.
- Format in Camera: After inserting the card and turning on the camera, press the screen, then press the recording button to stop recording. Enter the settings interface, select "Format," and click "OK" to format the microSD card.

Ensure FAT32 file system and 32 kilobytes allocation unit size.

Navigate to settings to format the SD card directly on the device.
Note: All data on the microSD card will be deleted during formatting. Please back up any important data before proceeding. Do not remove or insert the microSD card while the dash cam is powered on, as this may damage the card or device.
2.3 Dash Cam Mounting
- Turn off your car engine.
- Fix the recorder onto your original rearview mirror using the provided straps. Ensure the straps are tight for a secure fit.
- Adjust the view angle of the front camera to achieve a good recording view.
2.4 Power and Camera Connections
- Connect the car charger to your car's cigarette lighter port.
- Connect the TYPE-C connector of the charging extension cable to the TYPE-C power port on the mirror dash cam.
- Install the rear camera at the rear of the vehicle.
- Connect the rear camera and its extension cable to the dash cam to verify proper operation.
- Connect the GPS module to the dash cam and attach it to the A-Pillar.
- Use the crowbar to hide the cables along the edge of the car windshield and ceiling for a neat installation.

Illustrates how to route cables for power and GPS module along the A-pillar.
2.5 Rear Camera Installation Options
There are two primary positions for installing the rear camera:
- Position 1: Rear Windshield
Install the rear camera on the rear windshield. This position is primarily for live stream rear view and is not intended for reversing guidance. Installation is simpler. - Position 2: Near License Plate (Recommended)
Install the rear camera near the license plate. This position is highly recommended as it provides a crisp and clear image for both live stream rear view and reversing guidance.

Choose between rear windshield (Position 1) or near license plate (Position 2).
2.6 Reversing Guide Feature Wiring
If you intend to use the reversing guide feature (only with Position 2 installation):
- Connect the red trigger cable of the rear camera extension cable to the positive lead of your car's reversing lamp.
- Ensure the connector positions are correct when connecting the rear camera to the extension cable.

Connect the red trigger wire to the reversing lamp's positive lead.
Final Checks:
- Clean the installation position thoroughly to ensure adhesive quality.
- Regularly clean the rear windshield if using Position 1 for optimal image quality.
- Adjust the lens position to ensure it is level with the ground.
- Start the engine and check if the device is installed and functioning correctly. If the display shows an inverted image, contact support.
2.7 Hardwire Kit Installation (Optional)
If your kit includes a hardwire kit, it enables time-lapse video recording for parking monitoring, saving memory capacity by recording one frame per second.

Connect BAT+ (Positive Pole), GND (Earth), and ACC (Ignition Cord) to the car's fuse box. Input: 12/30V, Output: 5V/2.5A.
Important: Before connecting the hardwire kit, ensure the engine is off and disconnect the negative terminal of the car battery to prevent short circuits.
3. Operating Instructions
3.1 Power Button / Screen Backlight Switch
- Long Press: In power-off state, long-press to turn on the device. In power-on state, long-press for 3 seconds to save video files and settings, then shut down.
- Short Press: In power-on state, short-press to turn off the screen display. Short-press again to turn it back on.
3.2 Touch Screen Operations
The dash cam features an intuitive touch screen interface:
- Switch Front and Rear Camera View: Slide left or right on the screen to switch between front view only, back view only, both front and back views.
- Adjust Camera Angle: Slide up or down on the screen to adjust the view angle. This feature is disabled when displaying both front and rear camera views.
- Adjust Screen Brightness: Slide left or right on the screen (where '+' and '-' icons are visible) to adjust brightness. The brightness setting will be saved even after power off.
- Main Interface Screen Operations: Click on icons to access various interfaces or functions.
- Up and Down Slide: Drag up and down to change the current camera video screen display position. This operation will be saved when the device is powered off.
- Left and Right Slide: Drag left and right to change the current video display source (front-facing, rear-facing, split-screen). This operation will be saved under current screen display conditions.
3.3 Main Interface Display Description

Displays recording status, time, date, and various function icons.
- Lock (EMR Emergency): Click the lock icon to protect the current video file from being overwritten. Click again to unlock.
- Audio Switch: Click to enable or disable audio recording. This setting is saved automatically.
- Recording: The icon indicates recording status. Click to toggle recording.
- Snapshot: Click to take a snapshot during recording.
- Playback Interface: Click to enter the playback interface.
- Settings: Click to enter the settings interface.
- Recording Status Icon: Flashes during normal recording; hidden when not recording.
- Recording Time: Displays current recording duration. Default is 1 minute for loop recording.
- Resolution: Displays current video resolution (default 4K).
- GPS Icon: White when GPS module is inserted; turns green upon receiving a signal.
- Power Status: Shows current power status.
- Time/Date: Displays current RTC time. Can be set in settings.
3.4 WIFI & APP Control
The dash cam supports connection to a smartphone app for viewing and managing videos.
- Download App: Scan the QR code below with your smartphone or search for "Viidure" in your app store (compatible with iOS and Android).
- Connect to Wi-Fi: On your smartphone, go to Wi-Fi settings, find the dash cam's Wi-Fi network (initial name: Dash cam-XXXX, initial password: 12345678), and connect. The Wi-Fi name and password can be modified within the app.
- Add Camera in App: Open the Viidure app, click "Add Camera" icon. Once added, you can edit, share, save, or delete videos and photos, and adjust camera parameters.
- Video Playback: Click "Recorder File" in the app to access the video file interface. You can play, manage, delete, or download videos. Downloaded files are saved in the app's album.

Scan to download the 'Viidure' app.
Note: The dash cam's Wi-Fi is for app connection only and does not provide internet access.
3.5 Playback Interface
From the main interface, click the "Playback Icon" to enter the playback interface. By default, it shows the video file interface for the front camera.
- Recording File: View normal recording files. Front and rear camera files are saved in separate folders ("front_norm" and "back_norm") on the SD card.
- Locked File: View locked recording files. These are saved in "front_emr" and "back_emr" folders and are protected from overwriting.
- Snapshot File Mode: View stored snapshot files. Photo files are saved in "front_photo" and "back_photo" folders.
- Front/Rear Camera Switch: Switch between front, rear, and internal camera video files within the current file list.
- Delete: In the file list, click the delete icon to remove selected files.
- Files in the Grid: Contains files under the current file mode. Slide up/down to select files.
- Back: Return to the main interface.
- Select All: Select all files in the current list.
3.6 Settings Menu Function Introduction
Access the settings menu from the main interface by clicking the "Settings" icon. All settings are saved when the device is powered off.
- Resolution: Change screen display resolution (4K or 1080P). Default is 4K.
- Record Time: Set video file segmentation duration (1, 2, or 5 minutes). Default is 1 minute. Older footage is overwritten when the SD card is full.
- Time-Lapse Recording: Compresses video by taking photos/videos over time. Options: Off, 12 hours, 24 hours (default Off). Requires hardwire kit.
- Time-Lapse Interval: Set frame rate for time-lapse (0.5, 1, or 5 seconds). Default is 0.5 seconds. Requires hardwire kit.
- Parking: Parking monitoring modes (Off, Low, Medium, High). Adjusts vibration detection sensitivity.
- G-Sensor (Gravity Sensor): Collision sensor modes (Off, Low, Medium, High). Default is Off. Locks video files upon vibration detection.
- Screen Sleep Mode: Screen protection options (Off, 10 seconds, 30 seconds, 1 minute). Default is Off. Screen turns off automatically if no touch/button operation. Recording continues.
- Light Source Frequency: Set to 50Hz or 60Hz.
- Language: Change display language.
- Audio: Switch for recording audio.
- Rear Mirror: Streaming media mirror image options (On/Off). Default Off.
- Date/Time: Set recording time and date. Updates displayed time and OSD watermark.
- Format: Format the microSD card. Choose quick format and confirm.
- GPS: If connected, shows options for time zone calibration, speed calibration, and GPS information.
- Time Zone: Set the time zone for accurate traffic accident evidence recording.
- Restore Factory: Restore all functional and screen settings to factory defaults.
- About (Device Information): Displays recorder's kernel software and model information.
4. Maintenance
- MicroSD Card Reformatting: Periodically reformat the memory card (every 2-3 weeks is recommended) after backing up any desired files. This ensures optimal performance and prevents data corruption.
- Lens Cleaning: Ensure there are no fingerprints or dirt on the camera lens. Clean gently with a soft, lint-free cloth to maintain clear video quality.
- General Cleaning: Wipe the dash cam's exterior with a dry or slightly damp cloth. Avoid using harsh chemicals or abrasive materials.
5. Troubleshooting (Frequency QA)
| Problem | Solution |
|---|---|
| Camera not recording video or taking photos? | Ensure you are using a suitable memory card (Class 10+, up to 256GB), formatted properly, and inserted correctly. |
| Camera automatically stops recording? | Format the memory card in the settings menu. If the G-sensor is triggered too often, locking many video files, try keeping its sensitivity low. |
| Camera not turning on? | The built-in battery is for saving video files after power loss, not for powering the device. Ensure external power supply is connected properly, the power indicator on the adapter is on, and connectors are tight. |
| Recorded video is unclear? | Check for fingerprints or dirt on the lens. Adjust the angle to avoid blocks, glare, or windshield reflections. |
| Camera crashes or is unresponsive? | Use a pin or unfolded paper clip to press the RESET button to restart the camera. |
6. Specifications
| Parameter | Specification |
|---|---|
| Item Name | 12 Stream Media Mirror DashCam with 2 Channels |
| Display Screen | 12-inch IPS Touch Screen |
| Image Sensor | 4K |
| Built-in Image Sensor | 4K (3840x2160) |
| Rear Camera | 1080P (1920x1080) |
| Lens Angle | 170 degrees |
| Video Resolution | Front: 4K (3840x2160), Rear: 1080P (1920x1080) |
| TF Card Slot | Micro SD |
| Photo Resolution | 8M (3840x2160) |
| Storage Compression | H.264 |
| Video Format | TS |
| Image Format | JPEG |
| Storage Temperature | -30°C to 70°C |
| Operating Temperature | -15°C to 50°C |
| Operating Humidity | 15-65% RH |
| Storage Card capacity | Supports up to 256GB |
| Lens | Full Glass + High-resolution Lens |
| Video Specifications | TS |
| Transfer Speed | TYPE-C |
| Power Interface | 5V 2A |
| Built-in Speaker | 8R 1W |
| Built-in Recording | High-fidelity Speaker |
| Battery | Built-in Lithium Polymer |
| Time-lapse video recording | Front and rear dual time-lapse recording, reduce power consumption, stable monitoring around the body |
| ADAS | Support: forward collision warning, lane change pressure warning, pedestrian collision warning, vehicle distance too close warning |
| BSD | Support: blind spot monitoring; lane change assist |
7. GPS Function Introduction
The GPS module provides location and speed data, which can be viewed alongside your video recordings.
- After a successful GPS connection, the speed icon on the dashcam will turn green.
- Watching GPS Videos on Computer:
- Insert the TF card into your computer.
- Select the GPS player installation package (e.g., GXPlayer). Unzip and install it on your PC to watch videos with GPS data.
- Watching GPS Videos on Mobile App (iOS):
- Install the GXPlayer APP on your iOS device.
- You can then watch videos directly on your MacBook or iOS device.
- Factors Affecting GPS Signals:
- Other signal interference in the car.
- Severe weather (rainstorm, snowstorm, etc.).
- Tunnels with weak signals or remote mountainous areas.
8. User Tips
- For optimal video quality, ensure your windshield is clean, especially in the area where the camera lens is positioned.
- Regularly check the dash cam's screen to ensure it is recording correctly and the image is not inverted.
- If using the parking monitoring feature, consider the sensitivity settings (Low, Medium, High) based on your parking environment to avoid excessive recordings.
- Keep the dash cam's firmware updated if new versions become available, as this can improve performance and add features.
9. Support
If you encounter any problems such as damage or loss of accessories during use, please contact us. We are committed to providing you with the best service.

After-Sales Services: QOZ-Aprilboy@outlook.com