1. Introduction
Thank you for choosing the Aprilboy 4K Car Dash Cam. This manual provides essential information for the proper installation, operation, and maintenance of your new device. Please read it thoroughly before use and retain it for future reference.
Important Safety Notices
- Before using the product, please read and understand all instructions in this user manual.
- Only use original safety-tested accessories provided by the manufacturer.
- Remove the protection film from the screen and lenses before using.
- Do not place the product in a location that may affect airbag deployment or obstruct the driver's view.
- Securely mount the product before driving. Ensure lenses are clean and unblocked.
- Avoid exposing the product to direct sunlight or extremely high temperatures. The operating temperature ranges from -20°C (-4°F) to 60°C (140°F).
- A formatted memory card (Class 10 or above) is required before first-time use. Do not insert or remove the memory card while the device is powered on.
- Drive safely! Do not operate the product while driving to avoid distractions and potential accidents. Operate only when the car is safely parked.
2. Package Contents
Please check the box for the following items:
- Aprilboy 4K Dash Cam Unit
- Car Charger (with Type-C USB cable)
- User Manual (PDF version available for download)
- Installation Tools (e.g., plastic pry tool, adhesive pads, USB Micro SD card reader)
- Optional: Rear Camera (if purchased)
- Optional: GPS Module (if purchased)
Image showing the included accessories: car charger, user manual, and installation tools (USB reader and pry tool).
3. Product Overview
Buttons and Indicator Lights
- Short press button (3 seconds): Take a photo.
- Click button: View WiFi information, switch between Front Camera / Rear Camera display.
- Long press button: Power On / Off.
- Press button (8 seconds): Restore factory settings.
- ● Blinking red light: Indicates video recording (for both front and rear cameras).
- ▲ Blinking yellow light: Indicates locked video recording (triggered by G-sensor event).
Key features of the dash cam, including WiFi, Night Vision, Type-C port, G-sensor, advanced processor, 170° wide angle, loop recording, and parking monitor.
4. Installation
4.1. Memory Card Insertion
Insert a Class 10 or above Micro SD card into the designated slot. It is highly recommended to format the SD card before first use. Warning: Do not insert or remove the memory card while the driving recorder is powered on to avoid damage.
A Micro SD card and a USB card reader, typically used for transferring footage to a computer.
4.2. Mounting the Dash Cam
Attach the dash cam to a suitable position on your front windshield, ensuring it does not obstruct your view. Adjust the viewing angle accordingly to capture the desired field of view.
The dash cam is mounted on the car's windshield, with its power cable connected and routed discreetly.
4.3. Power Connection
Connect the USB power cable into the Type-C USB power port of the Dash Cam. Then, plug the car charger into your vehicle's cigarette lighter socket.
4.4. Rear Camera Installation (Optional)
If you have purchased a rear camera, connect it to the extension cable and then plug the extension cable into the Dash Cam. Install the rear camera on the rear windshield. The installation process is generally straightforward.
Diagram illustrating the placement and wiring for installing a rear camera in a vehicle.
5. App Setup and WiFi Connection
The Aprilboy Dash Cam can be controlled and managed via the "Viidure" app on your smartphone.
5.1. Install the App
Scan the QR code below or search for "Viidure" in your app store to download the application (available for both Apple and Android mobile phones).
QR code to download the Viidure app from App Store or Google Play.
Note: Please grant the necessary system permissions to the app. If you accidentally deny permissions, clear the app data in your phone settings to restore the initial state and re-grant permissions.
5.2. WiFi Connection Steps
- Step 1: Ensure WiFi is enabled on both your mobile phone and the dash cam. Open the "Viidure" app.
- Step 2: Connect the dash cam to its power supply. In the app, click "OK" when prompted for location permission to connect to WiFi.
- Step 3: In the app, tap "Connect WiFi". Your phone will jump to the WiFi settings interface. Select the dash cam's WiFi network (e.g., "Dashcam-******") and click "CONNECT".
Default WiFi Name: Dashcam-******
Default WiFi Password: 12345678
Note: After starting the dash camera, if you disconnect from WiFi, please click the button on the dash cam to restart WiFi within 5 minutes.
The Viidure app interface, demonstrating real-time footage viewing and options to share or download content.
6. App Functions and Settings
The Viidure app provides various functions to manage your dash cam.
6.1. Main Interface Overview
- Memory Capacity: Displays current storage usage (e.g., 1.0G/60.0G).
- Take a picture: Capture still images.
- Camera File: View photos and videos stored on the SD card.
- Settings: Access various device configurations.
6.2. App Settings
Within the app's settings, you can configure the following:
- App Language: Set the language for the application.
- Date Format: Choose your preferred date display format.
- Enter playback to automatically download photos: Enable/disable automatic download of photos during playback.
- Offline Map: Manage offline map data.
6.3. Dash Cam Function Settings (via App)
| Setting | Options/Values | Description |
|---|---|---|
| Sound Recording | Video Sound On / Video Sound Off | Enables or disables audio recording. |
| Speaker Volume | Mute, Low, Medium, High | Adjusts the dash cam's sound volume. |
| Video Resolution | Front Support 4K (3840x2160), Rear Support 1080P (1920x1080) | Sets the recording resolution for front and rear cameras. |
| Loop Recording Duration | 1 Min, 3 Min, 5 Min | Sets the length of each video segment. When the storage card is full, the oldest video will be overwritten. |
| Mirror | On / Off | Mirrors the video feed. |
| Flip | On / Off | Flips the video feed vertically. |
| Collision Sensing (G-Sensor) | Off, Low, Medium, High | When the camera is recording, it will automatically lock the current video upon impact detection. |
| Collision Detection Sensitivity for Parking | Off, Low, Medium, High | Adjusts collision sensitivity for parking monitor mode after the car is turned off. |
| Time-Lapse Recording Duration | Off, 15 Min, 12 Hours, 24 Hours | Requires a separately purchased hardwire kit to support this functionality. |
| Low Voltage Regulation | 11.8V, 12.0V, 12.2V | If the vehicle battery drops below the set voltage, the camera will automatically shut down. Requires a separately purchased hardwire kit. |
| WiFi Password | Reset WiFi Password | Allows you to change the WiFi password in your phone settings. |
| Firmware Version | Displays current firmware version. | Information about the device's software. |
| Format SD Card | Action | Formats the inserted memory card. Use if the card is abnormal or for regular maintenance. |
| Factory Reset | Action | Restores all settings to their default factory values. |
7. GPS Functionality (Optional)
If you have purchased the external GPS module, connect it to the dash cam. After a successful GPS connection, the speed icon on the dash cam will turn green.
A diagram illustrating the connection of the external GPS module to the dash cam, which is powered by the car charger.
7.1. Watching GPS Videos on Your Computer
- Windows System: Insert the TF card into your computer. Select the GPS player installation package (GXPlayer), unzip, and install it on your PC to watch videos with GPS data.
- iOS System: Install the GXPlayer app on your MacBook to watch videos directly.
A screenshot of the GXPlayer application, displaying video footage alongside a map and speed information, indicating GPS data integration.
7.2. Viewing GPS Videos in the Mobile App
To view GPS videos in the mobile app, you must first download these videos to your local phone files.
7.3. Factors Affecting GPS Signals
- Other signal interference within the car.
- Severe weather conditions (rainstorm, snowstorm, etc.).
- Tunnels or remote mountainous areas with weak or no signal.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Aprilboy |
| Item Type | Car DVR |
| Assembly Mode | Portable Recorder |
| Certification | CE |
| Imaging Sensor | SONY IMX415 |
| Chipset Manufacturer | NOVATEK |
| Pixels | 1800Mega |
| Camera Resolution | 3840x2160 (4K) |
| View Angle | 170° |
| Aperture | 1.8 |
| Number Of Lenses | 2 (Front and optional Rear) |
| Video Code | H.265 |
| Frames Per Second | 30 |
| Max External Memory | 512G |
| Memory Card Required Reading Speed | Class 10 |
| Input/Output | Type-C |
| Power Source | Corded Electric |
| Battery | Built-in |
| Battery Life | 24H (Parking Monitor) |
| Built-in Screen | Yes |
| Display Size | <3" |
| Display | OLED |
| Touch Screen | No |
| Screen Ratio | 4:3 |
| Audio Recorded | Yes |
| Loop-Cycle Recording Feature | Yes |
| NightShot Function | Yes |
| Rear Camera | Yes (Optional) |
| GPS logger | External (Optional) |
| WiFi Function | Yes |
| APP Compatibility | Viidure |
| OSD Language | Arabic, Chinese (Simplified), Chinese (Traditional), Czech, English, Finnish, French, German, Hebrew, Hungarian, Japanese, Korean, Russian, Turkish, Vietnamese |
| Special Features | G-Sensor, SD/MMC Card, With Rearview Mirror, Anti Surge Voltage Impact, Waterproof (Rear Camera), Anti Fog, Anti Vibration, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, Wifi Function, Parking Monitor, Speed and Coordinates Recording, 3D DNR, External GPS |
9. Troubleshooting
- Cannot connect to WiFi: Ensure WiFi is enabled on both your phone and the dash cam. Check app permissions. If issues persist, try restarting the dash cam's WiFi via the button within 5 minutes of startup. If still unable to connect, perform a factory reset or contact support.
- Memory card error/not recording: Ensure you are using a Class 10 or above Micro SD card. Format the SD card using the app settings. If the problem continues, try a different SD card.
- Dash cam shuts down unexpectedly: If using a hardwire kit, check the Low Voltage Regulation setting. If the vehicle battery drops below the set threshold, the camera will shut down to protect the battery.
- Poor video quality: Ensure the lenses are clean and free from obstructions. Check the video resolution settings in the app.
- GPS not working: Ensure the external GPS module is correctly connected. Check for signal interference from other devices in the car or environmental factors like tunnels.
- Device gets warm during operation: It is normal for the dash cam to get warm during operation. If it becomes excessively hot or exhibits unusual behavior, discontinue use and contact support.
- Camera language cannot be changed: The camera's internal language may not be user-changeable, though the app language can be adjusted.
For any persistent problems that cannot be solved, please contact customer support.
10. User Tips
- The dash cam is generally easy to install and use.
- The screen displays date and time when it turns off after a few minutes, which is a convenient feature.
- For optimal recording, especially with front and rear cameras, consider using a 64GB or larger Micro SD card to save more footage (e.g., 8 hours for front and rear).
- The image quality, particularly at night, is clear and sharp for its price point.
- While the device has a built-in battery, it is primarily designed for parking monitor functionality and requires constant power from the car for continuous recording.
- If you plan to use a hardwire kit for parking surveillance, ensure proper installation with good ventilation and appropriate fusing.
11. Maintenance
- Cleaning: Use a soft, dry cloth to clean the dash cam's body and lenses. Do not use abrasive cleaners or solvents.
- Firmware Updates: Periodically check the Viidure app for available firmware updates to ensure optimal performance and new features.
- Memory Card: Regularly format your Micro SD card (e.g., once a month) to prevent data corruption and ensure smooth recording. Replace old or faulty cards.
- Storage: When not in use for extended periods, store the dash cam in a cool, dry place away from direct sunlight.
12. Warranty and Support
We are committed to providing the best product experience and after-sale service.
12.1. One Year Limited Warranty
Our warranty period is one year from the date of purchase. If any machine parts are damaged or if you encounter problems during use, we will provide timely solutions and a satisfactory shopping experience.
12.2. Contact Support
Please contact us with your online order for free replacement and lifetime technical support. You may also be eligible for free accessories.
Email: maierdirect@outlook.com
13. Frequently Asked Questions (FAQ)
- Q: Is there Hebrew language support?
- A: Yes, the OSD Language options include Hebrew, along with Arabic, Chinese (Simplified/Traditional), Czech, English, Finnish, French, German, Hungarian, Japanese, Korean, Russian, Turkish, and Vietnamese.
- Q: Can the rear camera be obtained separately?
- A: The product is available in configurations with or without a rear camera. Please check the product options when purchasing.
- Q: Is the rear camera waterproof?
- A: Yes, the special features list "Waterproof" which applies to the rear camera for external mounting.
- Q: Is the camera rechargeable, and how long does the battery last?
- A: The dash cam has a built-in battery. However, its primary power source is corded electric (via the car charger). The "24H Battery Life" refers to the duration of the parking monitor function, which relies on the car's battery or a hardwire kit, not continuous recording solely on the internal battery.
- Q: Does this video recorder have a built-in battery?
- A: Yes, it has a built-in battery.
- Q: Can I connect this camera via USB to my Android radio and manage recordings and power supply from there?
- A: The dash cam uses a Type-C port for power. While it has AV-IN and Wi-Fi interfaces, direct USB connection for full management and power from an Android radio might not be universally supported. You may be able to use AV-IN for display, but for control and power, the dedicated car charger or a compatible hardwire kit is recommended.