1. Product Overview
The Aprilboy 4K Dash Cam is a high-definition car camera system designed to record your driving journey and monitor your vehicle. It features 4K front recording and 2.5K rear recording (for models with a rear camera), built-in Wi-Fi, G-Sensor, loop recording, and 24-hour parking monitoring capabilities.
2. Performance Parameters
| Parameter | Specification |
|---|---|
| Front Video Resolution | 4K, 2.5K, 1080P |
| Rear Video Resolution | 1080P |
| TF memory card slot | Micro TF |
| Video format | TS |
| Image format | JPG |
| Storage temperature | -30°C~70°C |
| Memory card capacity | Micro SD card (Support 8GB ~ 128GB) |
| Display | 3" IPS Screen |
| Microphone Speaker | Built-in |
| WiFi | Built-in |
| Control | Buttons |
| Camera Lens | 170° + 150° |
| OSD Language | Chinese (Simplified), English, German, Japanese, Korean, Portuguese, Russian, Spanish |
| Aperture | F1.8 |
| Working Temperature | -20°C~+70°C |
| Cable Length | Car charger 3.2m, rear cable 6m |
| Dimensions (W x H x D) | 10.5*6CM |
| Input/Output | USB 2.0 |
| Power Source | Corded Electric |
| APP Compatibility | Android / iPhone |
| Built-in Screen | Yes |
| Loop-Cycle Recording Feature | Yes |
| Audio Recorded | Yes |
| Maximum Video Frame Rate | 25 |
| NightShot Function | Yes |
| Rear Camera | Yes |
| Original Package | Yes |
| Touch Screen | No |
| Screen Ratio | 16:9 |
| Memory Card Required Reading Speed | Class 10 |
| View angle | 150° |
| Video Code | H.264 |
| Is Batteries Included | Yes |
| Special Features | G-Sensor, With Rearview Mirror, Wide Dynamic Range, WiFi function, Parking Monitor |
| Max External Memory | 64G |
| Number Of Lenses | 2 |
| Pixels | 800Mega |
| Display Size | 3"-5" |
| GPS logger | None |
| Battery | built-in |
| Assembly Mode | Portable Recorder |
| Chipset Manufacturer | MSTAR |
| Frames Per Second | 30 |
| Origin | Mainland China |
| Item Type | Car DVR |
| Certification | CE |
| Interface | AV-In, USB2.0, Wi-Fi, Micro SD/TF |
3. Setup Guide
Follow these steps to properly install and set up your Aprilboy 4K Dash Cam.
3.1. Unboxing and Initial Setup
This video demonstrates the unboxing of the dash cam and its components, followed by a basic installation overview and initial setup steps, including language selection.
3.2. Insert Memory Card
A Class 10 or above high-speed Micro SD card (8GB ~ 128GB) is highly recommended. A 64GB SD card may be included. Format the card in the camera before first use. Do not remove or insert the memory card while the dash cam is powered on to prevent data corruption or damage.
3.3. Install Dash Cam on Windshield
- Insert the bracket into the bracket slot on the dash cam.
- Choose a suitable installation position on your windshield, ensuring it does not obstruct your view.
- Clean the windshield surface thoroughly with a dry cloth.
- Press the dash cam firmly onto the windshield using the suction cup or adhesive mount.
- Adjust the viewing angle of the front camera accordingly to capture the road ahead clearly.
3.4. Connect Power
There are two methods to power the dash cam:
Method 1: Connect to Car Charger
Use the provided car charger to connect the dash cam to your car's cigarette lighter. The camera will automatically turn on when you start the car and turn off a few seconds after the engine is off.
Note:
- Only use the provided original car charger.
- If the camera does not turn off automatically after 1 minute of the car engine being off, your car's cigar lighter may not connect with ACC. In this case, consider using a 3-lead hardwire kit to prevent battery drain.
Method 2: Connect to Hardwire Kit (Not Included)
A 3-lead hardwire kit (not included) allows the dash cam to operate continuously for 24-hour parking monitoring. Connect the hardwire kit to your car's fuse box.
Warning:
Installing a hardwire kit is recommended to be done by a professional to avoid vehicle damage. If you install it yourself, refer to online tutorials for your specific car model. Fuse box locations and designs vary by vehicle.
3.5. Install Rear Camera (If applicable)
Before permanent mounting, ensure the rear camera functions correctly.
Position 1: Near the License Plate (Supports rear viewing and reverse assist)
- Plug the rear camera into the AV-IN rear camera port on the main dash cam unit.
- Route the rear camera cable along the top of the windshield, door frame, A-pillar, B-pillar, and car boot, all the way to the car license plate area.
- Choose a suitable mounting position near the license plate and secure the rear camera with the provided screws. It's recommended to angle the camera slightly downwards.
- Connect the red wire on the rear camera's extension cable to the positive lead of your vehicle's reversing lamp for reverse assist functionality. If reverse assist is not needed, this connection is optional.
Position 2: On the Rear Windshield (Supports rear view only)
- Plug the rear camera into the AV-IN rear camera port on the main dash cam unit.
- Route the rear camera cable along the top of the front windshield, door frame, and all the way to the rear windshield.
- Choose a mounting position on the rear windshield and use the provided sticky pads to attach the rear camera. Ensure the camera is placed correctly to prevent an upside-down view.
Note:
- The included rear camera cable is 23ft. If a longer cable (e.g., 33ft) is needed for larger vehicles, please contact customer support.
- Pay attention to the connector position when connecting the rear camera with the extension cable.
3.6. Connect GPS Module (Optional, purchased separately)
- Plug the GPS module into the Type-C port on the camera.
- Connect the car charger or hardwire kit to the Type-C port on the GPS module.
- Fix or hide the GPS module to prevent blocking the driver's field of view or the camera's view.
3.7. Hide Cables
Use the provided installation tool (bar) to neatly tuck and hide the cables along the car's interior trim for a clean installation.
4. Operating Instructions
4.1. Button Functions
- Power Key: Long press to switch off; Short press to switch the screen on/off.
- Ascending Key (Up Arrow): Take photo; In menu, navigate up.
- Descend Key (Down Arrow): Switch front and rear camera view; In menu, navigate down.
- Menu/Back Key: Enter function menu; In any menu step, acts as a 'back' button to return to the previous step.
- OK (Confirmation) Key: Start/stop recording video; In menu, confirm selection or skip to next option.
- M (File) Key: View video and photos; In playback, select to delete.
- Lock Key: Lock video; In playback, lock or unlock files.
- Long press Down Arrow: Turn on/off recording voices.
4.2. Recording Interface
When the dash cam is powered on, it enters the recording interface. Key indicators are displayed on the screen:
- Recording Indicator: Red dot flashes during normal recording. Yellow dot indicates locked video.
- Record Duration: Shows the length of the current video clip (default 1 minute).
- Resolution: Displays current video resolution (default 4K).
- WDR: Indicates Wide Dynamic Range status (On/Off).
- Date & Time: Displays current RTC date and time.
- Parking Icon: Indicates parking monitoring status.
- G-sensor Icon: Indicates G-sensor status.
- GPS Icon: (If GPS module connected) Turns green when connected, indicating speed display.
- WiFi Icon: Turns white when connected to phone via Wi-Fi.
- SD Card Icon: Shows if SD card is inserted correctly.
- Audio Icon: Indicates if audio recording is On/Off.
- Power Icon: Displays when car charger is connected.
- License Plate: Displays set license plate number.
- Front/Rear Camera View Window: Shows live feed from cameras.
4.3. Playback Interface
From the recording interface, press the Playback Button to access the playback interface.
Playback on Camera
The playback interface defaults to 'Video File'. Use Up/Down buttons to switch between 'Video File', 'Locked File', and 'Photo File'. Press OK to view selected files.
- Video File: View normal or unlocked videos. Press Playback button to delete, Lock button to lock/unlock, Menu button to return.
- Locked File: View locked videos. Press Lock button to unlock.
- Photo File: View photos. Press Playback button to delete.
Playback on Computer
Remove the SD card from the camera and use a card reader to connect it to your PC/MAC to view footage. The files are organized into folders:
| Folder | Sub-folder | Corresponding Footage |
|---|---|---|
| event | F | Locked videos for front cam |
| R | Locked videos for rear cam | |
| park | F | Parking monitoring/time-lapse recording videos for front cam |
| R | Parking monitoring/time-lapse recording videos for rear cam | |
| photo | F | Photos for front cam |
| R | Photos for rear cam | |
| video | F | Normal/Unlocked videos for front cam |
4.4. WiFi Connect & App Control
The dash cam can be controlled via the "viidure" app on your smartphone.
- Install the App: Download "viidure" from the App Store or Google Play, or scan the QR code in the manual.
- Connect to Camera's WiFi:
- Access the Setting Menu on the dash cam, navigate to WiFi, and turn it on.
- Note the WiFi Name (e.g., K******) and Password (e.g., 12345678) displayed in the camera's "About" section.
- On your phone, connect to the camera's WiFi network using the provided password. The WiFi icon on the camera will turn white upon successful connection.
- Using the App:
- Open the "viidure" app. After a few seconds, the preview interface will appear.
- Tap the Record icon and Take Photo icon to control video recording or photo capture.
- Tap the Switch icon to toggle between front and rear camera views.
- Tap the Camera File icon to access video files, or Camera Settings to adjust camera settings.
- Tap "Select" to choose videos or photos for download. A Selected Icon will appear on chosen items.
- Tap the Download icon to start downloading selected files.
4.5. Setting Menu Instructions
Press the Menu Button to enter the Setting Menu interface. Use Up/Down buttons to navigate, OK to select/confirm, and Menu to exit.
- Resolution: Change front camera video resolution (4K, 2.5K, 1080P). Default is 4K.
- Record time: Set video clip duration (1MIN, 3MIN, 5MIN). Default is 1 minute.
- Parking: Adjust sensitivity for parking monitoring (Off, Low, Middle, High). Default is Off. Requires 3-lead hardwire kit for continuous monitoring.
- G-Sensor: Adjust sensitivity for impact detection (Off, Low, Middle, High). Default is Off. Higher sensitivity locks videos more frequently.
- Wi-Fi: Turn On/Off the built-in camera WiFi. Default is On.
- Screen saver: Set screen off time (Off, 30 seconds, 3 minute, 5 minute). Recording continues when the screen is off.
- Light source frequency: Set according to your country/location (50Hz, 60Hz). Default is 60Hz.
- Language: Choose OSD language.
- Audio: Turn On/Off sound recording. Default is On.
- Rear mirror: Turn On/Off rear camera mirror function (horizontal flip).
- WDR: Turn On/Off Wide Dynamic Range for improved exposure balance in varying light conditions.
- Lapse: Set duration for parking monitoring time-lapse recording (Off, 5Hours, 12Hours, 24Hours). Requires 3-lead hardwire kit.
- Date/Time: Set current date and time. Essential for accurate evidence recording.
- Volume: Adjust button beep volume (Off, Low, Middle, High).
- Format: Format the inserted SD card. This will delete all data.
- GPS information: (Requires GPS module) View GPS logs via app or PC/MAC.
- Speed unit: (Requires GPS module) Choose speed unit for video display (km/h, mile/h).
- Time zone: Set correct time zone.
- Car ID: Choose to stamp license plate number on videos. Set and modify the license plate number.
- Restore Factory Settings: Reset all settings to default.
- About: View device core, software, and model information.
5. Maintenance
- Memory Card Care: Regularly format your Micro SD card (at least once a month) to ensure optimal performance and prevent errors. Always use a high-speed Class 10 or above card.
- Cleaning Lenses: Ensure the camera lenses (front and rear) and your car's windshield are clean and free of dirt, dust, or grease for clear video quality.
- Firmware Updates: Check the manufacturer's website or app for any available firmware updates to improve performance and add new features.
- Storage Temperature: Avoid exposing the dash cam to extreme temperatures outside the -30°C to +70°C range to prevent damage.
6. Troubleshooting (FAQ)
6.1. Camera Power Issues
- Q: Camera CANNOT turn ON?
- A: Check power cord connection. Long-press the Power Button. If still not working, remove the SD card, press the Reset Button (at the bottom of the device), then long-press the Power Button again.
- Q: The camera doesn't turn off after the car is off?
- A: This usually means your car's cigar lighter doesn't connect with ACC. You may need to unplug the car charger manually each time or install a hardwire kit for proper power management.
- Q: The camera turns itself ON/OFF frequently?
- A: Ensure the power cable is fully plugged in and well connected. If the issue persists, remove the SD card, press the Reset Button, then long-press the Power Button to turn it ON. If still not resolved, contact support.
6.2. Video & Recording Issues
- Q: Videos are fuzzy?
- A: Remove protective films from lenses. Clean lenses and windshield. If the lens is out of focus, contact support with a sample video/screenshot. Note: Wide-angle lenses may cause some image distortion, which is normal.
- Q: It is Overexposure while recording videos?
- A: Adjust the camera angle if it's pointing too high (e.g., towards the sky). For the rear camera, point it slightly downwards.
- Q: The earliest video files are missing?
- A: The dash cam uses loop recording. When the SD card is full, unlocked older videos are overwritten. Ensure date/time is correct and format the SD card. Locked videos are not auto-deleted.
- Q: Videos locked frequently and automatically?
- A: Your G-sensor sensitivity might be too high. Adjust it to a lower level in the settings. If it still locks frequently even on 'Low', turn the G-sensor OFF or contact support for a software update.
- Q: My Video playback on PC is lagging.
- A: This can happen with high-bitrate videos on slower PCs. Try setting the camera to a lower resolution and re-record to check if the issue persists. Ensure your computer meets the minimum requirements for 4K video playback.
- Q: The camera can not record video or take photos?
- A: Ensure you are using a provided or standard-compliant SD card. Make sure the SD card is formatted and inserted correctly.
- Q: Color of the video or photo is not good?
- A: Verify the 'Light source frequency' setting is appropriate for your region (e.g., 60Hz for North America). You can also try changing the front camera video resolution to 4K.
6.3. Memory Card & Storage Issues
- Q: It reminds "Card Full" frequently?
- A: Format the SD card to delete all data. Set G-sensor to prevent frequent locking of videos. Set a suitable record time for loop recording. If the issue persists, press the Reset Button to reset the camera.
- Q: Memory card is inserted correctly in camera, but it reminds: "SD Error", "NO SD Card", etc?
- A: Ensure you are using the provided SD card or a standard-compliant memory card. If not, replace the card. Try formatting the SD card. Turn off the camera, re-plug the power cable, and restart. If the problem persists, the SD card may be defective; try a new one. Always back up important footage before formatting.
6.4. App & Connectivity Issues
- Q: CANNOT see the camera's WiFi name (WiFi SSID) in your phone's available network?
- A: Ensure the camera's WiFi is ON in the Setting Menu. Reopen your phone's WLAN settings and refresh. If still not found, contact support.
- Q: It always reminds you to connect the camera WiFi when you are trying to use the viidure App?
- A: Verify your phone is connected to the correct camera WiFi. Ensure you are within the camera's WiFi signal range (approx. 10ft without obstructions). Try recording a video on the device. Update the "viidure" app to the latest version. If the camera cannot record normally, it might be an SD card issue.
- Q: After joining the WiFi, a "Confirm connection" pop-up states "the WLAN can not access the Internet"?
- A: The camera's WiFi does not provide internet access. To view/manage footage via the "viidure" App, maintain connection to the camera's WiFi. The app will not function if disconnected.
- Q: Can I view footage, download video or monitor my car via the App from a remote location?
- A: No. The camera's WiFi is only available within its signal range (approx. 10ft radius without obstructions).
6.5. Other Issues
- Q: The camera Freezing, Lagging or Crashing?
- A: Try replacing the SD card. If the issue persists, remove the SD card, press the Reset Button, then long-press the Power Button to turn it ON.
- Q: Suction mount cannot attach on windshield well?
- A: Clean the windshield thoroughly with a glass cleaning wipe. Ensure the protective film is removed from the suction cup. If it still doesn't work, contact support for a replacement.
- Q: The rear camera view is flipped or left-right reversal?
- A: Adjust the "Rear Mirror" setting in the camera's menu.
7. User Tips
- Regular Formatting: To prevent recording issues and ensure smooth operation, format your SD card at least once a month directly through the dash cam's settings.
- Optimal G-Sensor Setting: If you find videos are frequently locked, adjust the G-Sensor sensitivity to a lower setting (Low or Off) to avoid filling up your SD card with unnecessary locked files.
- Check Power Connection: If the dash cam doesn't turn on or off with your car, double-check the car charger connection. If your car's cigarette lighter is always on, consider a hardwire kit for proper parking monitoring.
- App for Quick Access: Use the "viidure" app for convenient viewing and downloading of footage directly to your phone, especially for quick checks after an incident.
- Proper Cable Management: Utilize the provided installation tool to neatly tuck away cables, ensuring a clean look and preventing obstruction of your view or interference with vehicle controls.
8. Warranty and Support
If you encounter any problems such as damage or loss of accessories during use, please contact customer support for assistance. We are committed to providing the best service.
For a detailed user manual in PDF format, you can refer to the official document: Aprilboy 4K Dash Cam User Manual (PDF).