1. Introduction
Thank you for choosing the Aprilboy 12 Inch Mirror 4K Dash Cam. This device is designed to enhance your driving safety and provide reliable recording of your journeys. Featuring a 12-inch full touch screen, 4K front recording, 2.5K rear recording, advanced driver assistance systems (ADAS), blind spot detection (BSD), and GPS tracking, this dash cam offers comprehensive coverage and smart features for a safer driving experience.
2. Packing List
Please check the package contents to ensure all items are present:
- Mirror Dash Camera
- Car Charger
- Rear Camera Kit
- Rubber Mounting Strap (x2)
- Easy Pry Tool
- Screw (x4)
- 3M Adhesive Pad (x2)
- Wiring Loops (x5)
- Car Pin
- Car Reader
- Instructions Manual
- GPS Module
Image: Contents of the accessory kit.
3. Product Overview
Familiarize yourself with the components and ports of your dash cam:
Front View
- Touchscreen Display: 12-inch full touch screen for operation and viewing.
Topside View
- Type-C Input: For connecting the car charger.
- AV IN: For connecting the rear camera.
- Memory Card Slot: For inserting the TF (MicroSD) card.
- GPS Port: For connecting the external GPS module.
- Mounting Brackets: For securing the dash cam to your rearview mirror.
Underside View
- Power Button: For turning the device on/off and controlling the display.
- Microphone: For audio recording.
Video: A visual demonstration of the Aprilboy 4K Dash Cam's features and components.
4. Setup
4.1 Initial Setup
- Turn off your car engine.
- Insert a high-speed TF (MicroSD) card (Class 10 or above, minimum 512MB, maximum 256GB) into the memory card slot of the recorder.
4.2 Hardware Installation
- Fix the mirror dash camera onto your original rearview mirror using the provided rubber mounting straps.
- Insert the car charger into your vehicle's cigarette lighter socket.
- Connect the Type-C input port of the dash cam to the car charger using the charging extension cable. Route the cable neatly along the edge of the windshield.
- Install the rear camera at the back of your vehicle. Pay attention to the camera's orientation. Route the rear camera cable along the roof lining to the front of the vehicle.
- Connect the rear camera cable to the AV IN port on the dash cam.
- Adjust the position of the front camera lens to ensure it is level with the ground and captures the desired view.
- Start your car engine. The dash cam should power on automatically, and the system working indicator light will illuminate. The video indicator light will flash, indicating recording has started. Verify the display screen is normal; if the image is inverted, please contact support.
Hardwire Kit Installation (for 24H Parking Monitor)
If your kit includes the original hardwire kit, you can enable 24-hour parking monitoring with time-lapse video recording (one frame per second). Connect the hardwire kit as follows:
- BAT+: Connect to a constant power source (always on).
- GND: Connect to vehicle ground.
- ACC: Connect to an accessory power source (on when ignition is on).
Image: Visual representation of ADAS features like Forward Collision, Pedestrian Collision, and Lane Departure Warning.
Image: Visual representation of Blind Spot Detection (BSD) and Lane Change Assist.
4.3 Software Setup (Mobile App)
- Install the App: Scan the QR code provided in the manual (or search your app store) to download and install the