Aprilboy 4K Car Dash Cam

Contents

Aprilboy 4K Ultra HD Car Dash Cam User Manual

Model: 4K Car Dash Cam

Brand: Aprilboy

1. Introduction

Thank you for choosing the Aprilboy 4K Ultra HD Car Dash Cam. This manual provides essential information for the proper installation, operation, and maintenance of your device. Please read it thoroughly before use and keep it for future reference.

2. Safety Notices

  1. Before using the product, please read and understand all the instructions in this user manual and keep the manual well for future reference.
  2. Only use the original safety-tested accessories provided by the manufacturer.
  3. Remove the protection film on the screen and lenses before using the product.
  4. The dash cam must not be placed in a location that may affect the deployment of airbags, and must not obstruct the driver's view.
  5. Securely mount this product before driving. Make sure the lenses are clean and not blocked.
  6. Do not leave the product in a place that is exposed to direct sunlight or extremely high temperature. The operating temperature of this product ranges from -20°C (-4°F) to 60°C (140°F).
  7. A formatted memory card is required to be inserted into the product before the first-time use.
  8. Drive safe! Do not operate the product when you are driving to avoid a traffic accident caused by distraction. Be sure to park the car in a safe place before operating.

3. Product Overview

3.1. Package Contents

The package includes the following items:

Dash Cam packaging showing car charger, user manual, and installation tools.

Text Description: An image showing the contents of the Dash Cam package, including the main dash cam unit, a car charger, a user manual, and various installation tools such as cable clips, a card reader, and a car wire trim tool.

  • Aprilboy 4K Ultra HD Car Dash Cam
  • Car Charger (USB Type-C cable with USB car charger adapter)
  • User Manual
  • Installation Tools (Electrostatic Sticker, SD Card, Card Reader, Car Wire Trim Tool, Stuck Needle, Cable Clips)

3.2. Device Features

Dash Cam features icons including WiFi, Night Vision, Type-C, G-sensor, Advanced Processor, 170 degree Wide Angle, Loop Recording, and Parking Monitor.

Text Description: An image displaying icons representing key features of the dash cam: WiFi connectivity, Night Vision, Type-C port, G-sensor, Advanced Processor, 170° Wide Angle, Loop Recording, and Parking Monitor.

  • 4K Ultra HD Video Recording
  • Built-in WiFi for App Control
  • Night Vision (WDR, Front F1.8, Super Night Vision)
  • G-Sensor for emergency recording
  • Loop Recording
  • Parking Monitor (requires hardwire kit for 24H monitoring)
  • 170° Wide Angle Lens
  • Type-C Power Input
  • Optional GPS and Rear View Camera support

3.3. Buttons and Ports

Refer to the unboxing video for a visual guide to the device's ports and buttons:

Text Description: An unboxing video demonstrating the physical features of the dash cam, including the Type-C port, AV-IN port, TF Card slot, and the main control button.

  • Short press button (3 seconds): Take a photo
  • Click button: View WiFi information / Switch between Front Camera / Rear Camera view
  • Long press button: On/Off
  • Press button (8 seconds): Restore factory settings
  • Type-C Port: For power input.
  • AV-IN Port: For connecting the optional rear camera.
  • TF Card Slot: For inserting the memory card.

3.4. Indicator Lights

  • Blinking red light: Indicates video recording (Front/Rear camera).
  • Blinking yellow light: Indicates locked video recording (G-sensor activated).

4. Setup and Installation

4.1. Inserting the Memory Card

Insert a formatted Class 10 or above micro SD card into the TF card slot. Do not pull out or insert the memory card when the driving recorder is turned on to avoid damage.

Micro SD card and USB card reader.

Text Description: An image showing a micro SD card next to a USB 2.0 card reader, indicating the type of memory card used with the dash cam.

4.2. Mounting the Dash Cam

Attach the dash cam to a suitable position on the front windshield using the provided electrostatic sticker and mount. Adjust the viewing angle accordingly to ensure optimal recording coverage.

Dash cam mounted on a car windshield, showing its view on a phone screen with GPS speed and location, and a rear camera.

Text Description: A composite image showing the dash cam mounted on a car windshield, with a smartphone displaying the dash cam's live feed, GPS speed, and location. A separate rear camera is also shown.

4.3. Connecting Power

Connect the USB power cable into the Type-C USB power port of the Dash Cam. Then, plug the car charger into the cigarette lighter socket of your car.

USB car charger with a Type-C cable.

Text Description: A close-up image of the USB car charger with its attached Type-C cable, used to power the dash cam.

4.4. Installing the Rear Camera (Optional)

If you have purchased a rear camera, connect it with the extension cable into the AV-IN port on the Dash Cam. Install the rear camera on the rear windshield. Ensure it works well by checking the display.

Diagram showing the installation of a rear camera on the back windshield of a car, connected to the main dash cam unit.

Text Description: A diagram illustrating the installation of a rear camera on the interior of a car's rear windshield, with a cable running to the main dash cam unit.

5. App Installation and Connection

5.1. Install the Viidure App

Scan the QR code below to download the "Viidure" app. The app is available for both Apple and Android mobile phones.

QR code for Viidure app download
QR Code for Viidure App

Note: Please agree to the app's system permissions. If you accidentally deny permissions, clear the software data in your phone settings to restore the initial state.

5.2. WiFi Connection Steps

  1. Step 1: Turn on your mobile phone's WiFi and the dash cam's WiFi. Open the Viidure app.
  2. Step 2: Connect the dash cam power supply. Click 'OK' if prompted for location permissions.
  3. Step 3: In the app, tap 'Connect WiFi'. Your phone will jump to the WiFi settings interface. Select the dash cam's WiFi network (e.g., Dashcam-78613) and enter the default password: 12345678. Click 'CONNECT'.

Note: After starting the dash cam, please connect to its Wi-Fi within 5 minutes. If the connection disconnects, click the button on the dash cam to restart its Wi-Fi.

Dash cam screen showing WiFi connection status.

Text Description: A dash cam screen displaying a WiFi icon, indicating an active connection. This image is used to illustrate a successful WiFi connection.

6. Operating Instructions

6.1. App Interface Overview

The Viidure app provides various functions to control and manage your dash cam:

  • Memory Capacity: Displays available storage.
  • Take a Picture: Capture still images.
  • View Photos and Videos: Access recorded media.
  • Settings: Configure dash cam parameters.
Screenshot of the Viidure app interface on a smartphone, showing options for real-time footage, recording duration, photos, and videos.

Text Description: A smartphone screen displaying the 'Viidure' app interface, which allows users to check real-time footage, adjust recording duration, and download photos and videos from the dash cam.

6.2. App Function Settings

SettingOptionsDescription
Sound RecordingOn/OffEnable or disable audio recording.
Speaker VolumeMute, Low, Medium, HighAdjust the dash cam's sound volume.
Video ResolutionFront Support 4K, Rear Support 1080PSets video resolution to 4K (3840x2160) for front camera and 1080P (1920x1080) for rear camera.
Loop Recording Duration1 Min, 3 Min, 5 MinThe duration of each recording segment. If the storage card is full, older videos will be overwritten.
MirrorOn/OffMirrors the video feed.
FlipOn/OffFlips the video feed vertically.
Collision SensingOff, Low, Medium, HighWhen a collision or vibration is detected, the recorder will automatically lock the video of these critical events, preventing them from being overwritten.
Collision Detection Sensitivity for ParkingOff, Low, Medium, HighAdjusts the collision sensitivity for parking mode after the car is turned off.
Time-Lapse Recording DurationOff, 15 Min, 12 Hours, 24 HoursEnables time-lapse recording. Requires a separately purchased hardwire kit for full functionality.
Low Voltage Regulation11.8V, 12.0V, 12.2VWhen the vehicle battery is lower than the set voltage, the camera will automatically shut down. Requires a separately purchased hardwire kit for full functionality.
WiFi PasswordReset WiFi PasswordAllows you to change the WiFi password in phone settings.
Firmware VersionDisplays the current firmware version.
Format SD CardIf the memory card is abnormal, kindly format or replace it.
Factory ResetRestores the camera to factory settings. If problems persist, contact support.

7. GPS Functionality (Optional)

The dash cam supports an external GPS module (needs to be purchased separately) to record speed and location data.

Diagram showing the dash cam connected to an external GPS module and a car charger.

Text Description: A diagram illustrating the connection of the dash cam to an external GPS module and a car charger, indicating how GPS data is integrated.

7.1. GPS Connection

After a successful GPS connection, the speed icon on the dash cam display will turn green.

7.2. Watching GPS Videos on Computer

  1. Windows System: Insert the TF card into your computer. Select the GPS player installation package (GXPlayer), unzip it, and install it on your PC to watch videos with GPS data.
  2. iOS System: Install the GXPlayer app on your MacBook, then you can watch videos directly.

7.3. Watching GPS Videos on Mobile App

To view GPS videos in the mobile app, you must first download these videos to local files on your phone.

7.4. Factors Affecting GPS Signals

  • Other signal interference in the car.
  • Severe weather conditions (rainstorm, snowstorm, etc.).
  • In tunnels with weak signal or in remote mountainous areas.

8. Specifications

AttributeValue
Brand NameAprilboy
Item TypeCar DVR
Assembly ModePortable Recorder
Chipset ManufacturerNOVATEK
Frames Per Second30
Camera Resolution3840x2160 (4K)
View Angle170°
Number Of Lenses2 (Front & Rear)
Screen Ratio4:3
Display Size<3"
InterfaceAV-In, Wi-Fi, Micro SD/TF
Video CodeH.265
BatteryBuilt-in
Max External Memory512G
Memory Card Required Reading SpeedClass 10
Imaging SensorSONY IMX415
Pixels1800Mega
GPS loggerExternal
Special FeaturesG-Sensor, SD/MMC Card, With Rearview Mirror, Anti Surge Voltage Impact, Waterproof, Anti Fog, Anti Vibration, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, WiFi Function, Parking Monitor, Speed and Coordinates Recording, 3D DNR, External GPS
OSD LanguageArabic, Chinese (Simplified), Chinese (Traditional), Czech, English, Finnish, French, German, Hebrew, Hungarian, Japanese, Korean, Russian, Turkish, Vietnamese
Power SourceCorded Electric
APP CompatibilityViidure
Cable Length6M
Aperture1.8
Built-in ScreenYes
Loop-Cycle Recording FeatureYes
Audio RecordedYes
Maximum Video Frame Rate30
NightShot FunctionYes
Rear CameraYes (Optional)
Battery Life24H (for parking monitor, with hardwire kit)
Original PackageYes
Touch ScreenNo
Is Batteries IncludedYes
CertificationCE

9. Troubleshooting

  • Camera not turning on: Ensure the power cable is securely connected and the car charger is working. If the issue persists, try a factory reset (press button for 8 seconds).
  • SD card issues (writing error, not recognized): Format the SD card using the app's settings. If the problem continues, replace the SD card with a new Class 10 or above card.
  • WiFi connection issues: Ensure the dash cam's WiFi is turned on and you are connecting within 5 minutes of starting the dash cam. If the connection drops, click the button on the dash cam to restart its WiFi. Verify the password (default: 12345678).
  • Rear camera not working/missing: Ensure the rear camera is properly connected to the AV-IN port. If the rear camera was supposed to be included but is missing, contact customer support.
  • GPS not showing speed: Ensure the optional external GPS module is connected and the speed icon on the dash cam is green. Factors like signal interference, severe weather, or tunnels can affect GPS reception.
  • Language settings: The dash cam supports multiple OSD languages. Check the app settings to change the display language.
  • Parking monitor screen always active: This may be normal depending on your parking monitor settings. If you wish to change this behavior, adjust the 'Collision Detection Sensitivity for Parking' or 'Low Voltage Regulation' settings in the app. Note that 24H parking monitoring requires a hardwire kit.
  • Saving specific videos: The G-sensor automatically locks critical event videos. For manual saving, short press the button (3 seconds) to take a photo or use the app to download specific footage.
  • Camera working when car is off: This is part of the parking monitor feature. Ensure a hardwire kit is installed and 'Low Voltage Regulation' is configured to prevent draining your car battery.
  • App not multi-language: While the dash cam supports multiple OSD languages, the app's language might be limited. Check for app updates or refer to the app's specific settings for language options.

10. User Tips

  • Always use a high-quality Class 10 or above micro SD card for reliable recording.
  • Format the SD card regularly, especially before first use, to ensure optimal performance and prevent writing errors.
  • Since the dash cam does not have a touch screen, all settings and video playback are managed conveniently through the Viidure mobile app.
  • A 64GB micro SD card can store approximately 8 hours of footage when recording with both front and rear cameras. Consider a larger card (up to 512GB) for extended recording times.
  • The night vision quality is highly praised, providing clear and sharp recordings even in low-light conditions.
  • For 24-hour parking monitoring, a constant power connection via a hardwire kit is recommended to avoid draining your car's battery.
  • Footage can be easily downloaded to your phone via the app, eliminating the need to remove the memory card.

11. Warranty & Support

11.1. One Year Limited Warranty

We are committed to giving customers the best product experience and after-sale service. Our warranty period is one year. If the machine parts are damaged or there are any problems during use, we will solve them in time and provide you with a satisfactory shopping experience.

11.2. Contact Support

Please contact us with your online order if you have any questions or need assistance. We will provide free replacement and lifetime technical support. You may also be eligible for free accessories.

Email: maierdirect@outlook.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.