Atmel ATF15xx-DK3 CPLD Development/Programmer Apo
Ọrọ Iṣaaju
Atmel® ATF15xx-DK3 Complex Programmable Logic Device (CPLD) Idagbasoke/Apo olupilẹṣẹ jẹ eto idagbasoke pipe ati pirogirama In-System Programming (ISP) fun Atmel ATF15xx Ìdílé ti ile-iṣẹ boṣewa pin ibaramu CPLDs pẹlu awọn ẹya Logic Doubling®. Ohun elo yii n pese awọn apẹẹrẹ ni ọna iyara pupọ ati irọrun lati ṣe agbekalẹ awọn apẹẹrẹ ati ṣe iṣiro awọn aṣa tuntun pẹlu ATF15xx ISP CPLD kan. Ìdílé ATF15xx ti ISP CPLDs pẹlu Atmel ATF15xxAS, ATF15xxASL, ATF15xxASV, ati ATF15xxASVL CPLDs. Pẹlu wiwa ti awọn oriṣiriṣi awọn igbimọ ohun ti nmu badọgba iho lati ṣe atilẹyin pupọ julọ awọn iru package (1) ti a nṣe ni ATF15xx Ìdílé ti ISP CPLDs, ohun elo yii le ṣee lo bi oluṣeto ISP lati ṣe eto awọn ATF15xx ISP CPLDs ni pupọ julọ awọn iru package ti o wa. (1) nipasẹ boṣewa ile-iṣẹ JTAG ni wiwo (IEEE 1149.1).
Awọn akoonu Kit
- Atmel CPLD Idagbasoke/ Igbimọ Oluṣeto (P/N: ATF15xx-DK3)
- Atmel 44-pin TQFP Socket Adapter Board (P/N: ATF15xx-DK3-SAA44)(2)
- Atmel ATF15xx LPT-orisun JTAG Okun Igbasilẹ ISP (P/N: ATDH1150VPC)
- Meji Atmel 44-pin TQFP Sample Awọn ẹrọ
Atilẹyin ẹrọ
ATF15xx-DK3 CPLD Development/Apo Oluṣeto ṣe atilẹyin awọn ẹrọ wọnyi ni gbogbo awọn iwọn iyara Atmel ti o wa lọwọlọwọ ati awọn idii (ayafi 100-PQFP):
- ATF1502AS/ASL
- ATF1504AS/ASL
- ATF1508ASV/ASVL
- ATF1502ASV
- ATF1504ASV/ASVL
- ATF1508AS/ASL
- A ko funni ni igbimọ ohun ti nmu badọgba iho fun 100-pin PQFP.
- Nikan 44-pin TQFP Socket Adapter Board wa ninu ohun elo yii. Miiran iho ohun ti nmu badọgba lọọgan ti wa ni tita lọtọ. Wo Abala, “Apejuwe Hardware” fun alaye diẹ sii lori awọn koodu ohun ti nmu badọgba iho
Kit Awọn ẹya ara ẹrọ
CPLD Development / Pirogirama Board
- 10-pin JTAG-ISP Port
- Awọn iyika Ipese Agbara ti a ṣe ilana fun Orisun Agbara 9VDC
- Yiyan 5V, 3.3V, 2.5V, tabi 1.8VI/O Voltage Ipese
- Yiyan 1.8V, 3.3V, tabi 5.0V Core Voltage Ipese
- 44-pin TQFP Socket Adapter Board
- Awọn akọle fun I/O Pinni ti ATF15xx Device
- 2MHz Crystal Oscillator
- Mẹrin 7-apa LED Ifihan
- Awọn LED Olukuluku mẹjọ
- Mẹjọ Titari-bọtini Yipada
- Kode Agbaye ati Ijade Jeki Awọn Yipada Bọtini Titari ṣiṣẹ
- Lọwọlọwọ wiwọn Jumpers
Logic lemeji CPLDs
ATF15xx ISP CPLD pẹlu Logic Double Architecture
- ATF15xx ISP Gba Cable
- 5V, 3.3V, 2.5V, tabi 1.8V ISP Gbigba Cable fun PC Parallel Printer (LPT) Port
- Software idagbasoke PLD
- Awọn irinṣẹ sọfitiwia idagbasoke Atmel PLD wa lori ayelujara fun lilo apẹẹrẹ PLD ti ATF15xx ISP CPLDs. Jọwọ tọka si Overview iwe, "PLD
- Oniru Software Loriview” wa ni:
- http://www.atmel.com/images/atmel-3629-pld-design-software-overview.pdf
System Awọn ibeere
- Ohun elo ti o kere ju ati sọfitiwia ti o nilo lati ṣe eto ohun elo ATF15xx ISP CPLD eyiti a ṣe apẹrẹ nipa lilo sọfitiwia Apẹrẹ Atmel ProChip lori Igbimọ Idagbasoke/Programmer CPLD nipasẹ Atmel ATMISP v6.x (ATF15xx CPLD ISP Software) jẹ:
- x86 Microprocessor-orisun Kọmputa
- Windows XP®, Windows® 98, Windows NT® 4.0, tabi Windows 2000
- 128-MByte Ramu
- 500-MByte Free Lile Disk Space
- Asin atilẹyin Windows
- Ibudo Itẹwe Ti o jọra (LPT) Wa
- Ipese Agbara 9VDC pẹlu 500mA ti Ipese Lọwọlọwọ
- Atẹle SVGA (Ipinnu 800 x 600)
Bere fun Alaye
| Atmel Apá Number | Apejuwe |
| ATF15xx-DK3 | CPLD Idagbasoke/Apo oluṣeto (pẹlu ATF15xxDK3-SAA44*) |
| ATF15xxDK3-SAA100 | 100-pin TQFP Socket Adapter Board fun DK3 Board |
| ATF15xxDK3-SAJ44 | 44-pin PLCC Socket Adapter Board fun DK3 Board |
| ATF15xxDK3-SAJ84 | 84-pin PLCC Socket Adapter Board fun DK3 Board |
| ATF15xxDK3-SAA44* | 44-pin TQFP Socket Adapter Board fun DK3 Board |
Hardware Apejuwe
CPLD Development / Pirogirama Board
- Idagbasoke/Oluṣeto CPLD ati Awọn igbimọ Adapter Socket ti o han ninu eeya isalẹ ni awọn ẹya ti o wulo fun idagbasoke, ṣiṣe apẹẹrẹ, tabi igbelewọn
- ATF15xx CPLD awọn aṣa. Awọn ẹya ti o jẹ ki eyi jẹ ohun elo ibẹrẹ / ohun elo idagbasoke pupọ ati oluṣeto ISP kan fun idile ATF15xx ti JTAG-ISP CPLDs pẹlu:
- Titari-bọtini Yipada
- Awọn LED
- 7-apa Ifihan
- 2MHz Crystal Oscillator
- 5V, 3.3V, 2.5V, tabi 1.8V VCCIO Selector
- 1.8V, 3.3V, tabi 5.0V VCCINT Selector
- JTAG Ibudo ISP
- Socket Adapters
- 7-apa han pẹlu Selectable jumpers
- Igbimọ Idagbasoke/Programmer CPLD ni awọn ifihan apa 7 mẹrin ti o gba laaye akiyesi awọn abajade ATF15xx CPLD. Awọn ifihan mẹrin wọnyi jẹ aami bi DSP1, DSP2, DSP3, ati DSP4. Awọn ifihan 7-apakan ni awọn LED anode ti o wọpọ pẹlu awọn laini anode ti o wọpọ ti o sopọ si VCCIO (I/O ipese voltage fun CPLD) nipasẹ onka awọn resistors pẹlu yiyan jumpers ike bi JPDSP1, JPDSP2, JPDSP3, ati JPDSP4. Awọn wọnyi jumpers le wa ni kuro lati
mu awọn ifihan kuro nipa sisopọ VCCIO si awọn ifihan. Awọn laini cathode kọọkan ni asopọ si awọn pinni I/O ti ATF15xx CPLD lori CPLD - Development/Programmer Apo. Lati tan-an abala kan pato, pẹlu DOT ti ifihan kan, ATF15xx I/O pin ti o baamu ti a ti sopọ si apakan LED yii gbọdọ wa ni ipo kannaa kekere pẹlu eto folu ti o baamu; nitorina, awọn abajade ti ẹrọ ATF15xx yoo nilo iṣeto ni fun awọn iṣẹ-kekere ti nṣiṣe lọwọ ninu apẹrẹ file. Awọn ifihan ṣiṣẹ dara julọ ni 2.5V VCCIO tabi ga julọ.
- Apa kọọkan ti ifihan kọọkan jẹ lile-firanṣẹ si PIN I/O kan pato ti ẹrọ ATF15xx. Fun awọn ti o ga pin ka awọn ẹrọ (100-pin ati ki o tobi), gbogbo meje apa ati awọn DOT apa ti awọn mẹrin han ti wa ni ti sopọ si I / O pinni; sibẹsibẹ, fun awọn kekere pin ka awọn ẹrọ, nikan kan ayosile ti awọn ifihan, akọkọ ati kẹrin han, ti wa ni ti sopọ si ATF15xx ẹrọ I/O pinni. Awọn tabili 1 ati 2 ṣe afihan awọn asopọ package ifihan apa 7 si ẹrọ ATF15xx. Sikematiki iyika ti awọn ifihan ati awọn jumpers ti han ni nọmba ni isalẹ.
olusin 2. Aworan atọka Circuit ti Ifihan 7-apakan ati awọn Jumpers
Table 1.ATF15xx 44-pin Awọn isopọ to 7-apa han
| 44-pin TQFP | |||
| DSP / Apa | PLD Pin | DSP / Apa | PLD Pin |
| 1/A | 27 | 3/A | NC |
| 1/B | 33 | 3/B | NC |
| 1/C | 30 | 3/C | NC |
| 1/D | 21 | 3/D | NC |
| 1/E | 18 | 3/E | NC |
| 1/F | 23 | 3/F | NC |
| 1 G | 20 | 3 G | NC |
| 1/DOT | 31 | 3/DOT | NC |
| 2/A | NC | 4/A | 3 |
| 2/B | NC | 4/B | 10 |
| 2/C | NC | 4/C | 6 |
| 2/D | NC | 4/D | 43 |
| 2/E | NC | 4/E | 35 |
| 2/F | NC | 4/F | 42 |
| 2 G | NC | 4 G | 34 |
| 2/DOT | NC | 4/DOT | 11 |
| 44-pin PLCC | |||
| DSP / Apa | PLD Pin | DSP / Apa | PLD Pin |
| 1/A | 33 | 3/A | NC |
| 1/B | 39 | 3/B | NC |
| 1/C | 36 | 3/C | NC |
| 1/D | 27 | 3/D | NC |
| 1/E | 24 | 3/E | NC |
| 1/F | 29 | 3/F | NC |
| 1 G | 26 | 3 G | NC |
| 1/DOT | 37 | 3/DOT | NC |
| 2/A | NC | 4/A | 9 |
| 2/B | NC | 4/B | 16 |
| 2/C | NC | 4/C | 12 |
| 2/D | NC | 4/D | 5 |
| 2/E | NC | 4/E | 41 |
| 2/F | NC | 4/F | 4 |
| 2 G | NC | 4 G | 40 |
| 2/DOT | NC | 4/DOT | 17 |
Tabili 2.ATF15xx 84-pin ati 100-pin Awọn isopọ si Awọn ifihan apa 7
| 84-pin PLCC | |||
| DSP / Apa | PLD Pin | DSP / Apa | PLD Pin |
| 1/A | 68 | 3/A | 22 |
| 1/B | 74 | 3/B | 28 |
| 1/C | 70 | 3/C | 25 |
| 1/D | 63 | 3/D | 21 |
| 1/E | 58 | 3/E | 16 |
| 1/F | 65 | 3/F | 17 |
| 1 G | 61 | 3 G | 12 |
| 1/DOT | 73 | 3/DOT | 29 |
| 2/A | 52 | 4/A | 5 |
| 2/B | 57 | 4/B | 10 |
| 2/C | 55 | 4/C | 8 |
| 2/D | 48 | 4/D | 79 |
| 2/E | 41 | 4/E | 76 |
| 2/F | 50 | 4/F | 77 |
| 2 G | 45 | 4 G | 75 |
| 2/DOT | 50 | 4/DOT | 11 |
| 100-pin TQFP | |||
| DSP / Apa | PLD Pin | DSP / Apa | PLD Pin |
| 1/A | 67 | 3/A | 13 |
| 1/B | 71 | 3/B | 19 |
| 1/C | 69 | 3/C | 16 |
| 1/D | 61 | 3/D | 8 |
| 1/E | 57 | 3/E | 83 |
| 1/F | 64 | 3/F | 6 |
| 1 G | 60 | 3 G | 92 |
| 1/DOT | 75 | 3/DOT | 20 |
| 2/A | 52 | 4/A | 100 |
| 2/B | 54 | 4/B | 94 |
| 2/C | 47 | 4/C | 97 |
| 2/D | 41 | 4/D | 81 |
| 2/E | 46 | 4/E | 76 |
| 2/F | 40 | 4/F | 80 |
| 2 G | 45 | 4 G | 79 |
| 2/DOT | 56 | 4/DOT | 93 |
Awọn LED pẹlu Selectable jumpers
Igbimọ Idagbasoke/Programmer CPLD ni awọn LED kọọkan mẹjọ, eyiti o fun laaye awọn apẹẹrẹ lati ṣe afihan awọn ifihan agbara ti o jade lati ọdọ olumulo I / Os ti awọn ẹrọ ATF15xx. Awọn LED mẹjọ wọnyi jẹ aami LED1 si LED8 lori Igbimọ Idagbasoke/Programmer CPLD. Awọn cathode ti kọọkan LED ti wa ni ti sopọ si Ilẹ (GND) nipasẹ kan jara resistor, nigba ti anode ti kọọkan LED ti sopọ si a olumulo I / O pin ti CPLD nipasẹ JPL1/2/3/4/5/6/7 / 8 a yan jumper. Awọn jumpers wọnyi le yọkuro lati mu awọn LED kuro nipa sisopọ awọn anodes ti awọn LED si awọn pinni I/O ti CPLD. Awọn nọmba rẹ ni isalẹ sapejuwe awọn Circuit aworan atọka ti awọn LED pẹlu yiyan jumpers.
Lati tan-an LED kan pato, ATF15xx I / O pin ti o baamu ti a ti sopọ si LED gbọdọ wa ni ipo giga kannaa pẹlu ṣeto jumper ti o baamu; nitorina, awọn abajade ti ẹrọ ATF15xx yoo nilo lati tunto bi awọn abajade giga ti nṣiṣe lọwọ. Awọn LED ṣiṣẹ dara julọ ni 2.5V VCCIO tabi ga julọ.
Awọn ẹrọ kika pin isalẹ (44-pin) nikan ni mẹrin I / O ti sopọ si LED1/2/3/4. Fun awọn ẹrọ kika pin-giga (100-pin ati tobi julọ), gbogbo awọn LED mẹjọ ti sopọ si I/Os ti ẹrọ naa. Table 3 fihan awọn ti o yatọ package awọn isopọ ti CPLD I/O si awọn LED.
Table 3.ATF15xx Awọn isopọ si awọn LED
| 44-pin TQFP | |
| LED | PLD Pin |
| LED1 | 28 |
| LED2 | 25 |
| LED3 | 22 |
| LED4 | 19 |
| 44-pin PLCC | |
| LED | PLD Pin |
| LED1 | 34 |
| LED2 | 31 |
| LED3 | 28 |
| LED4 | 25 |
| 84-pin PLCC | |
| LED | PLD Pin |
| LED1 | 69 |
| LED2 | 67 |
| LED3 | 64 |
| LED4 | 60 |
| LED5 | 27 |
| LED6 | 24 |
| LED7 | 18 |
| LED8 | 15 |
| 100-pin TQFP | |
| LED | PLD Pin |
| LED1 | 68 |
| LED2 | 65 |
| LED3 | 63 |
| LED4 | 58 |
| LED5 | 17 |
| LED6 | 14 |
| LED7 | 10 |
| LED8 | 9 |
Titari-bọtini Yipada pẹlu Selectable Jumpers fun I/O Pinni
- Igbimọ Idagbasoke/Programmer CPLD ni awọn iyipada bọtini-titari mẹjọ, eyiti o ni asopọ si awọn pinni I/O ti CPLD. Awọn iyipada nfi awọn ifihan agbara igbewọle ranṣẹ si awọn pinni I/O olumulo ti ẹrọ ATF15xx. Awọn iyipada wọnyi jẹ aami SW1 si SW8 lori Idagbasoke CPLD/Oluṣeto
Ọkọ. Ipari kan ti titẹ-bọtini titari titẹ sii kọọkan ti sopọ si VCCIO, lakoko ti opin miiran ti iyipada bọtini-bọtini kọọkan ti sopọ si resistor fa-isalẹ ati lẹhinna sopọ si pin I/O pato ti CPLD nipasẹ JPS1/2 / 3/4/5/6/7/8 a yan jumper. - Ti o ba ti eyikeyi ọkan ninu awọn wọnyi yipada ti wa ni e ati awọn ti o baamu jumper ti ṣeto, awọn pato I / O pinni ti awọn ẹrọ yoo wa ni ìṣó si a kannaa ga ipinle nipa awọn wu ti yipada Circuit. Niwọn igba ti iyipada-bọtini titari kọọkan tun ti sopọ si resistor ti o fa-isalẹ, titẹ sii yoo ni ipo kannaa kekere ti a ko ba tẹ yipada pẹlu eto folti ti o baamu. Ti a ko ba ṣeto bọtini titari, PIN ti o baamu yoo ṣe itọju bi PIN ti ko ni asopọ. olusin 4 ni a Circuit aworan atọka ti awọn titari-bọtini yipada ati selectable jumper. Tabili 4 n ṣe afihan awọn asopọ ti awọn yiyi bọtini-titari mẹjọ si awọn pinni I/O CPLD ni awọn oriṣi package oriṣiriṣi.
Table 4.ATF15xx Awọn isopọ si I / O Pin Yipada
| 44-pin TQFP | |
| Titari Bọtini | PLD Pin |
| SW1 | 15 |
| SW2 | 14 |
| SW3 | 13 |
| SW4 | 12 |
| SW5 | 8 |
| SW6 | 5 |
| SW7 | 2 |
| SW8 | 44 |
| 44-pin PLCC | |
| Titari Bọtini | PLD Pin |
| SW1 | 21 |
| SW2 | 20 |
| SW3 | 19 |
| SW4 | 18 |
| SW5 | 14 |
| SW6 | 11 |
| SW7 | 8 |
| SW8 | 6 |
| 84-pin PLCC | |
| Titari Bọtini | PLD Pin |
| SW1 | 54 |
| SW2 | 51 |
| SW3 | 49 |
| SW4 | 44 |
| SW5 | 9 |
| SW6 | 6 |
| SW7 | 4 |
| SW8 | 80 |
| 100-pin TQFP | |
| Titari Bọtini | PLD Pin |
| SW1 | 48 |
| SW2 | 36 |
| SW3 | 44 |
| SW4 | 37 |
| SW5 | 96 |
| SW6 | 98 |
| SW7 | 84 |
| SW8 | 99 |
Titari-bọtini Yipada pẹlu Selectable Jumpers fun GCLR ati OE1 Pinni
Igbimọ Idagbasoke/Programmer CPLD ni awọn yiyi-bọtini-titari meji fun Global Clear (GCLR) ati Awọn pinni Imudaniloju (OE1) ti CPLD. Awọn iyipada n ṣakoso awọn ipinlẹ ọgbọn ti OE1 ati awọn igbewọle GCLR ti awọn ẹrọ ATF15xx. Awọn iyipada wọnyi jẹ aami SW-GCLR ati SW-GOE1 lori ọkọ. Ipari kan ti SW-GCLR igbewọle titari-bọtini yipada ti sopọ si GND. Awọn miiran opin ti
titari-bọtini yipada ti sopọ si a fa-soke resistor to VCCIO ati ki o si ti sopọ si GCLR igbẹhin input pin ti ATF15xx ẹrọ. O ti pinnu lati ṣee lo bi ifihan agbara atunto kekere ti nṣiṣe lọwọ lati tun awọn iforukọsilẹ ni ẹrọ ATF15xx pẹlu ṣeto olupilẹṣẹ yiyan JPGCLR. Bakanna, opin kan ti SW-GOE1 titẹ-bọtini titari-bọtini ti wa ni asopọ si GND. Awọn miiran opin ti awọn titari-bọtini yipada
ti sopọ si resistor ti o fa soke si VCCIO ati lẹhinna sopọ si PIN igbewọle igbẹhin OE1 ti ẹrọ ATF15xx. O ti pinnu lati ṣee lo bi iṣẹjade kekere ti nṣiṣe lọwọ jẹki ifihan agbara lati ṣakoso mimuuṣiṣẹ/dipaku ti awọn ifipamọ iṣelọpọ ipinlẹ-mẹta ni ATF15xx pẹlu JPGOE yiyan jumper ṣeto. Nọmba 5 jẹ aworan atọka ti awọn iyipada bọtini-titari ati awọn jumpers fun awọn pinni GCLR ati OE1.
Ti eyikeyi ninu awọn yiyi titari-bọtini wọnyi ba ti tẹ ati pe o ti ṣeto jumper ti o baamu, I/O kan pato ti CPLD yoo lọ si ipo kekere kannaa. Niwon kọọkan titari-bọtini ti wa ni tun ti sopọ si a fa-soke resistor, awọn ti o baamu CPLD igbewọle yoo ni a kannaa ga ipinle ti o ba ti titari-bọtini yipada ti ko ba e pẹlu awọn ti o baamu jumper ṣeto. Ti o ba ti yan jumper ti ko ba ṣeto, awọn ti o baamu igbẹhin input pin ti CPLD le ti wa ni kà a No Connect (NC) pin. Tabili 5 fihan awọn nọmba pin ti GCLR ati OE1 awọn pinni igbewọle igbẹhin ti awọn ẹrọ ATF15xx ni gbogbo awọn iru package ti o wa.
Nọmba 5. Aworan ti Circuit ti Awọn Yipada Bọtini Titari ati Awọn Jumpers Yiyan fun GCLR ati OE1
Table 5.Pin Awọn nọmba ti GCLR ati OE1
| 44-pin TQFP | 44-pin PLCC | 84-pin PLCC | 100-pin TQFP | |
| GCLR | 39 | 1 | 1 | 89 |
| OE1 | 38 | 44 | 84 | 88 |
2MHz Oscillator ati Aago Yiyan Jumper
Aago Yiyan Jumper ti a samisi JP-GCLK lori CPLD Development/Programmer Board jẹ olutẹ-ipo meji ti o fun laaye awọn olumulo lati yan eyi ti GCLK pin igbewọle igbẹhin (boya GCLK1 tabi GCLK2) ti ẹrọ ATF15xx yẹ ki o sopọ si iṣẹjade ti 2MHz oscillator. Ni afikun, a le yọ awọn jumper kuro lati gba orisun aago itagbangba lati sopọ si GCLK1 ati/tabi GCLK2 ti ẹrọ ATF15xx. olusin 6 jẹ ẹya apejuwe ti awọn Circuit aworan atọka ti oscillator ati yiyan jumper. Tabili 6 ṣe afihan awọn nọmba pin fun GCLK1 ati GCLK2 awọn pinni igbewọle igbẹhin ti ẹrọ ATF15xx ni gbogbo awọn iru package ti o yatọ.
Ti a ba ṣeto jumper GCLK1, jumper yoo wa si ẹgbẹ ti igbimọ naa. Ni apa keji, ti a ba ṣeto jumper GCLK2, olutẹpa yoo wa si aarin igbimọ naa.
Table 6.Pin Awọn nọmba ti GCLK1 ati GCLK2
| 44-pin TQFP | 44-pin PLCC | 84-pin PLCC | 100-pin TQFP | |
| GCLK1 | 37 | 43 | 83 | 87 |
| GCLK2 | 40 | 2 | 2 | 90 |
VCCIO ati VCCINt Voltage Yiyan Jumpers ati LED
- Awọn VCCIO ati VCCINT Voltage Selector Jumpers, ike VCCIO Selector ati VCCINT Selector lẹsẹsẹ lori ATF15xx-DK3 Development/Apo siseto, gba yiyan ti I/O ipese
- voltage ipele (VCCIO) ati mojuto ipese voltage ipele (VCCINT) ti o ti wa ni lilo fun awọn afojusun CPLD lori kit. Ni kete ti a ṣeto awọn jumpers wọnyi ni deede, awọn LED (ti a pe ni VCCINT LED ati VCCIO LED) yoo tan; sibẹsibẹ, ni isalẹ ipese voltage awọn ipele (ie 2.5V tabi isalẹ), awọn LED le jẹ baibai pupọ.
- Fun ATF15xxAS/ASL (5.0V) CPLDs, mejeeji VCCIO Selector ati VCCINT Selector jumpers gbọdọ ṣeto si 5.0V.
- Fun ATF15xxASV/ASVL (3.3V) CPLDs, mejeeji VCCIO Selector ati VCCIN Selector Jumpers gbọdọ wa ni ṣeto si 3.3V nikan.
- Agbara ti CPLD Development/Apo oluṣeto gbọdọ wa ni pipa nigbati o ba yipada ipo ti VCCIO tabi VCCINT Vol.tage Yiyan Jumper (VCCIO Selector or VCCIN Selector).
- ICCIO ati ICCINT Jumpers
- Awọn jumpers ICCIO ati ICINT le yọkuro ati lo bi awọn aaye wiwọn ICC. Nigbati a ba yọ awọn jumpers kuro, awọn mita lọwọlọwọ le sopọ si awọn ifiweranṣẹ lati wiwọn agbara lọwọlọwọ ti ibi-afẹde CPLD. Nigbati awọn olumulo ko ba lo awọn jumpers wọnyi lati wiwọn lọwọlọwọ, awọn jumpers wọnyi gbọdọ wa ni ṣeto ni ibere fun kit ati CPLD lati ṣiṣẹ.
- Voltage Awọn olutọsọna
- Meji voltage awọn olutọsọna, ike VR1 ati VR2, ti wa ni lo lati ominira ina ati fiofinsi awọn
- VCCINT ati VCCIO voltages lati 9VDC ipese agbara. Fun awọn alaye, jọwọ wo ATF15xx-DK3 kit sikematiki, olusin 12.
- Power Ipese Yipada ati Power LED
- Yipada Ipese Agbara, ti a samisi POWER SWITCH, le yipada si ipo titan tabi pipa, eyiti a lo lati tan tabi pa agbara igbimọ ATF15xx-DK3 lẹsẹsẹ. O faye gba 9VDC voltage ni Jack Ipese Agbara lati kọja si voltage awọn olutọsọna nigbati o jẹ ninu awọn lori ipo. Nigbati Yipada Ipese Agbara ba wa ni titan, LED Agbara (ti a samisi POWER LED) yoo tan imọlẹ lati fihan pe ATF15xx-DK3 Apo ti wa ni ipese pẹlu agbara.
- Power Ipese Jack ati Power Ipese akọsori
- Igbimọ ATF15xx-DK3 ni awọn oriṣiriṣi oriṣiriṣi meji ti awọn asopọ ipese agbara ti a samisi JPower ati JP Power. Boya ọkan ninu awọn asopọ ipese agbara wọnyi le ṣee lo lati so orisun agbara 9VDC pọ si ohun elo naa. Asopọ agbara akọkọ ti a samisi JPower, jẹ jaketi agbara agba pẹlu ifiweranṣẹ 2.1mm iwọn ila opin, ati pe o baamu si 2.1mm (iwọn ila opin inu) x 5.5mm (ipin opin ita) pulọọgi obinrin. Akọsori ipese agbara keji ti a samisi JP Power, jẹ akọsori 4-pin akọ 0.100 ″ pẹlu awọn ifiweranṣẹ onigun mẹrin 0.025 ″. Wiwa ti awọn iru meji ti awọn asopọ agbara ngbanilaaye awọn olumulo lati yan iru ohun elo ipese agbara lati lo fun ATF15xx-DK3 Development/Programmer Kit.
- Ọkan ninu awọn asopọ ipese agbara meji yẹ ki o ni agbara pẹlu orisun 9VDC ṣugbọn kii ṣe mejeeji ni akoko kanna.
- JTAG ISP Asopọmọra ati TDO Yiyan Jumper
- Awọn JTAG Asopọ ISP ti aami JTAG-IN, ni a lo lati so ATF15xx JTAG awọn pinni ibudo (TCK, TDI, TMS, ati TDO) nipasẹ okun igbasilẹ ISP si ibudo itẹwe (LPT) ti PC kan fun JTAG ISP siseto ti ATF15xx ẹrọ. Awọn asopọ polarized ni a lo lori ATF15xx-DK3 ati ISP Gbigba Cable lati dinku awọn iṣoro asopọ. Aami PIN1 ni isalẹ ti JTAG Asopọmọra ISP tọkasi ipo pin 1 ti akọsori 10-pin ati siwaju dinku aye lati so Cable Gbigbawọle ISP ni aṣiṣe.
- Si apa osi ti JTAG-Asopọmọra, awọn ọwọn meji ti vias wa, ati pe wọn jẹ aami JTAG-JADE. Wọn pinnu lati gba awọn olumulo laaye lati ṣẹda JTAG daisy chain lati ṣe JTAG mosi to ọpọ awọn ẹrọ. Awọn olumulo yoo nilo lati ta iru asopọ kanna gẹgẹbi eyiti a lo fun JTAG- IN sinu JTAG-OUT ipo lati le lo ẹya ti o wa.
- Lati ṣẹda JTAG daisy pq lilo ọpọ ATF15xx-DK3 lọọgan, TDO Yiyan Jumper, ike JP-TDO, gbọdọ wa ni ṣeto si awọn yẹ ipo. Fun gbogbo awọn ẹrọ ti o wa ninu pq daisy ayafi ẹrọ to kẹhin, a gbọdọ ṣeto jumper yii si ipo ẸRỌ TẸTẸ. Fun ẹrọ ti o kẹhin ninu pq, a gbọdọ ṣeto jumper si ipo TO ISP CABLE. Nigbati jumper yii ba wa ni ipo ẸRỌ TẸTẸ, TDO ti JTAG ẹrọ yoo sopọ si TDI ti atẹle
- JTAG ẹrọ ni pq. Nigbati jumper yii ba wa ni ipo TO ISP CABLE, TDO ẹrọ yẹn yoo sopọ si TDO ti JTAG 10-pin asopo, eyi ti yoo gba awọn TDO ifihan agbara ti awọn ti ẹrọ ni pq lati wa ni tan pada si awọn ogun PC pẹlu awọn ISP software. Awọn nọmba rẹ ni isalẹ ni a Circuit aworan atọka ti awọn
- JTAG awọn asopọ ati awọn JP-TDO jumper. Tabili ti o wa ni isalẹ ṣe atokọ awọn nọmba pin ti J mẹrinTAG awọn pinni fun ẹrọ ATF15xx ni gbogbo awọn idii ti o wa.
Fun iṣeto ẹrọ ẹyọkan, ipo ti JP-TDO jumper gbọdọ wa ni ṣeto si TO ISP CABLE.
Aworan 7. Aworan ti Circuit ti JTAG Awọn asopọ ISP ati TDO Jumper
- Tabili 7.Pin Awọn nọmba ti JTAG Awọn ifihan agbara ibudo
| 44-pin TQFP | 44-pin PLCC | 84-pin PLCC | 100-pin TQFP | |
| TDI | 1 | 7 | 14 | 4 |
| TDO | 32 | 38 | 71 | 73 |
| TMS | 7 | 13 | 23 | 15 |
| TCK | 26 | 32 | 62 | 62 |
ISP algorithm jẹ iṣakoso nipasẹ sọfitiwia ATMISP, eyiti o nṣiṣẹ lori PC. Awọn mẹrin JTAG Awọn ifihan agbara jẹ ipilẹṣẹ nipasẹ ibudo LPT, ati pe wọn jẹ ifipamọ nipasẹ okun igbasilẹ ISP ṣaaju lilọ sinu ẹrọ ATF15xx lori igbimọ Idagbasoke/Programmer CPLD. 10-pin JTAG Pinout Akọsori Port lori CPLD Development/Programmer board ti han ni Nọmba 8, ati awọn iwọn ti J ọkunrin 10-pin yii.TAG akọsori ti han ni aworan 9.
olusin 8. 10-pin JTAG Port akọsori Pinout
- 10-pin JTAG Pinout Akọsori Port jẹ ibaramu pẹlu okun orisun ibudo ATDH1150PC/VPC LPT ati okun USB orisun ATDH1150USB, bakanna bi Altera
- ByteBlaster/MV/II LPT ibudo orisun kebulu. Ni afikun, sọfitiwia ATMISP v6.7 ngbanilaaye lilo boya Atmel naa
- Okun ATDH1150PC/VPC/USB tabi okun ByteBlaster/MV/II lati ṣe ISP.
- ATMISP v7.0 nikan ṣe atilẹyin okun ATDH1150USB.
- Socket Adapter Board
- Awọn ATF15xx-DK3 CPLD Development/Programmer Socket Adapter Boards (ATF15xx-DK3-XXXX) jẹ awọn igbimọ iyika ti o ni wiwo pẹlu ATF15xx-DK3 CPLD Development/ Board Programmer. Wọn ti wa ni lilo ni apapo pẹlu ATF15xx-DK3 CPLD Development/Programmer Board lati se ayẹwo tabi eto ATF15xx ISP CPLD awọn ẹrọ ni orisirisi awọn package orisi. Awọn igbimọ Adapter Socket mẹrin wa fun ATF15xx-DK3 ti o bo 44-TQFP, 44-PLCC, 84-PLCC, ati 100-
- Awọn oriṣi package TQFP ni idile ATF15xx ti awọn CPLDs.
- Igbimọ ohun ti nmu badọgba iho kọọkan ni iho fun ẹrọ ATF15xx ati pe o ni awọn akọle akọ ni apa isalẹ, ti a samisi JP1 ati JP2. Awọn akọle ti o wa ni ẹgbẹ isalẹ mate pẹlu awọn akọle obinrin lori igbimọ ATF15xx-DK3, ti a samisi JP4 ati JP3. Awọn ifihan apa 7 mẹrin, awọn bọtini titari,
- JTAG awọn ifihan agbara ibudo, oscillator, VCCINT, VCCIO, ati GND lori CPLD Development/Programmer Board ti sopọ si ẹrọ ATF15xx lori Socket Adapter Board nipasẹ awọn ọna asopọ meji wọnyi.
- Lori oke ohun ti nmu badọgba iho 44-TQFP, awọn asopọ 10-pin mẹrin wa pẹlu awọn iwọn kanna bi JTAG ISP asopo. Awọn pinni ti awọn asopọ mẹrin wọnyi ni asopọ si titẹ sii ati awọn pinni I/O (ayafi awọn mẹrin JTAG awọn pinni) ti awọn afojusun CPLD ẹrọ. Wọn le ṣee lo lati sopọ si oscilloscope tabi olutupa ọgbọn lati mu awọn iṣẹ ṣiṣe ti titẹ sii ati awọn pinni I/O ti CPLD. Wọn tun le ṣee lo lati so titẹ sii ati awọn pinni I/O ti CPLD si awọn igbimọ ita miiran tabi awọn ẹrọ fun igbelewọn ipele eto tabi idanwo.
- Atmel ATF15xx ISP Gba Cable
- Okun Gbigbasilẹ ATF15xx ISP (P/N: ATDH1150VPC) so ebute LPT ti PC pọ si J 10-pinTAG akọsori lori CPLD Development/Programmer Board tabi a aṣa Circuit ọkọ. Eyi ni a fihan ni Nọmba 10. Okun ISP yii n ṣiṣẹ bi ifipamọ lati fi silẹ JTAG awọn ifihan agbara laarin awọn PC ká LPT ibudo ati awọn ATF15xx lori awọn Circuit ọkọ. Awọn Power-On LED lori pada ti awọn 25-pin akọ asopo ile tọkasi wipe okun ti wa ni ti sopọ daradara.
- Rii daju pe LED yii ti wa ni titan ṣaaju lilo Atmel CPLD ISP Software (ATMISP).
- Eleyi ISP USB oriširiši 25-pin (DB25) akọ asopo ohun, eyi ti o ti sopọ si LPT ibudo ti a PC. Pulọọgi obinrin 10-pin naa sopọ si akọ JTAG akọsori lori ISP Circuit ọkọ. Gigun awọ pupa lori okun tẹẹrẹ n tọka si iṣalaye ti pin 1 ti plug obinrin. Ọkunrin 10-pin JTAG akọsori lori CPLD
- Igbimọ Idagbasoke/Programmer ti wa ni polaridi lati ṣe idiwọ awọn olumulo lati fi pulọọgi obinrin sii ni iṣalaye ti ko tọ.
- Awọn ohun elo Idagbasoke/Programmer CPLD pẹlu ATF15xx ISP Gbigba Cable
(ATDH1150VPC); sibẹsibẹ, miiran atilẹyin ISP kebulu tun le ṣee lo. Awọn kebulu ATDH1150VPC, ATDH1150USB, ByteBlasterMV, ati awọn kebulu ByteBlasterII le ṣee lo fun awọn ẹrọ ATF15xx/ASL (5V) ati ATF15xxASV/ASVL (3.3V), lakoko ti ATDH1150PC agbalagba ati awọn okun ByteBlaster fun ATFx15 le ṣee lo nikan.
- Nọmba 11 ṣe apejuwe pinout akọsori obinrin 10-pin fun ATF15xx ISP Gbigba Cable. 10-pin akọ akọsori pinout lori PC ọkọ (ti o ba ti lo fun ISP) gbọdọ baramu yi pinout.
- Akiyesi: Igbimọ Circuit gbọdọ pese VCC ati GND si okun ISP CPLD nipasẹ akọsori 10-pin akọ.
Awọn aworan atọka
Awọn itọkasi ati Support
Fun afikun awọn itọkasi sọfitiwia apẹrẹ PLD ati atilẹyin, iwe bii iranlọwọ files, awọn olukọni, awọn akọsilẹ ohun elo/awọn kukuru, ati awọn itọsọna olumulo wa ni www.atmel.com.
Atmel ProChip onise Software
Table 8.ProChip Onise References ati Support
| ProChip onise | Lati akojọ aṣayan ProChip akọkọ… |
| Egba Mi O | Yan Egba Mi O > Iranlọwọ Prochip onise. |
| Awọn ẹkọ ikẹkọ | Yan Egba Mi O > Awọn ẹkọ ikẹkọ. |
| Awọn iṣoro ti a mọ ati Awọn solusan | Yan Egba Mi O > Review KPS. |
Atmel WinCUPL Software
Table 9. WinCUPL Awọn itọkasi ati Support
| WinCUPL | Lati akojọ aṣayan WinCUPL akọkọ… |
| Egba Mi O | Yan Egba Mi O > Awọn akoonu. |
| CUPL Programmers Reference Itọsọna | Yan Egba Mi O > CUPL Programmers Reference. |
| Awọn ẹkọ ikẹkọ | Yan Egba Mi O > Atmel Alaye > Tutorial1.pdf. |
| Awọn iṣoro ti a mọ ati Awọn solusan | Yan Egba Mi O > Atmel Alaye > CUPL_BUG.pdf. |
Atmel ATMISP Software
Table 10. ATMISP Awọn itọkasi ati Support
| ATMISP | Lati akojọ aṣayan ATMISP akọkọ… |
| Egba Mi O Files | Yan Egba Mi O > Iranlọwọ ISP. |
| Awọn ẹkọ ikẹkọ | Yan Egba Mi O > ATMISP Tutorial. |
| Awọn iṣoro ti a mọ ati Awọn solusan | Lilo ẹrọ aṣawakiri Windows Explorer, wa folda ATMISP ki o ṣii naa kika.txt file pẹlu ASCII ọrọ olootu. |
Atmel POF2JED Iyipada Software
Table 11. POF2JED Awọn itọkasi ati Support
| POF2JED | Lati akojọ aṣayan POF2JED akọkọ… |
| Finifini Ohun elo Iyipada ATF15xx | Yan Egba Mi O > Awọn aṣayan Iyipada. |
Oluranlowo lati tun nkan se
- Fun atilẹyin imọ-ẹrọ lori eyikeyi awọn ọran ti o jọmọ Atmel PLD, kan si Ẹgbẹ Awọn ohun elo Atmel PLD ni:
- Imeeli pld@atmel.com
- Tẹlifoonu (+1)408-436-4333
- Online Support Fọọmù http://support.atmel.com/bin/customer.exe
Àtúnyẹwò History
| Àtúnyẹwò | Ọjọ | Apejuwe |
| 3605C | 06/2014 | Ṣe imudojuiwọn awọn sikematiki, awoṣe, awọn aami, ati oju-iwe aibikita. Fi apakan Itan Atunyẹwo kun. |
| 3605B | 05/2008 |
- Atmel Corporation 1600 Technology Drive, San Jose, CA 95110 USA T: (+1) (408) 441.0311 F: (+1) (408) 436.4200 | www.atmel.com
- © 2014 Atmel Corporation. / Rev.: Atmel-3605C-CPLD-ATF15xx-DK3-Development-Kit-UserGuide_062014.
- Atmel®, Aami Atmel ati awọn akojọpọ rẹ, Ṣiṣe awọn aye ailopin, ati awọn miiran jẹ aami-iṣowo tabi aami-iṣowo ti Atmel Corporation ni AMẸRIKA ati
awọn orilẹ-ede miiran. Awọn ofin miiran ati awọn orukọ ọja le jẹ aami-iṣowo ti awọn miiran. - ALAYE: Alaye ti o wa ninu iwe yii ti pese ni asopọ pẹlu awọn ọja Atmel. Ko si iwe-aṣẹ, ṣalaye tabi mimọ, nipasẹ estoppel tabi bibẹẹkọ, si eyikeyi ẹtọ ohun-ini imọ ni a fun ni nipasẹ iwe yii tabi ni asopọ pẹlu tita awọn ọja Atmel.
- AFI GEGE BI A TI SETO NINU AWON OFIN ATMEL ATI AWỌN NIPA TITAJA TI O WA LORI ATMEL. WEBAaye, ATMEL ko ro pe ko si layabiliti ohunkohun ti o si tako eyikeyi KIAKIA, TIMỌ, TABI ATILẸYIN ỌJA TABI Ofin ti o jọmọ awọn ọja rẹ pẹlu, ṣugbọn ko ni opin si, ATILẸYIN ỌJA TI AWỌN ỌLỌWỌ, AṢẸRẸ, . IN
- KO SI isẹlẹ ti ATMEL yoo ṣe oniduro fun eyikeyi taara, aiṣedeede, abajade, ijiya, PATAKI, tabi awọn ibajẹ lairotẹlẹ (PẸLU, LAISI OPIN, awọn ibajẹ fun isonu ati awọn ere, aibikita fun isọdọtun iṣowo), LILO IWE YI, TOBA TI A GBA ATMEL NI IMORAN NINU OSESESE IRU IRU BAJE.
- Atmel ko ṣe awọn aṣoju tabi awọn iṣeduro pẹlu ọwọ si išedede tabi aṣepari awọn akoonu inu eyi
iwe ati ni ẹtọ lati ṣe awọn ayipada si awọn pato ati awọn apejuwe ọja nigbakugba laisi akiyesi. Atmel ko ṣe ifaramo eyikeyi lati ṣe imudojuiwọn alaye ti o wa ninu rẹ. Ayafi ti o ba pese ni pataki bibẹẹkọ, awọn ọja Atmel ko dara fun, ati pe kii yoo lo ninu awọn ohun elo adaṣe. Awọn ọja Atmel ko ni ipinnu, ni aṣẹ, tabi atilẹyin fun lilo bi awọn paati ninu awọn ohun elo ti a pinnu lati ṣe atilẹyin tabi ṣetọju igbesi aye. - AABO-KỌRỌ, Ologun, ATI Awọn ohun elo adaṣe adaṣe: Awọn ọja Atmel ko ṣe apẹrẹ fun ati pe kii yoo lo ni asopọ pẹlu awọn ohun elo eyikeyi nibiti ikuna ti iru awọn ọja yoo nireti ni deede lati ja si ipalara ti ara ẹni pataki tabi iku (“Awọn ohun elo Aabo-Critical”) laisi iwe-kikọ kan pato ti oṣiṣẹ Atmel
- igbanilaaye. Awọn ohun elo Aabo-Lominu pẹlu, laisi aropin, awọn ẹrọ atilẹyin igbesi aye, ati awọn ọna ṣiṣe, ẹrọ tabi awọn ọna ṣiṣe fun sisẹ awọn ohun elo iparun ati awọn eto ohun ija.
- Awọn ọja Atmel ko ṣe apẹrẹ tabi pinnu fun lilo ninu ologun tabi awọn ohun elo aerospace tabi awọn agbegbe ayafi ti Atmel ṣe pataki ni pataki bi ipele ologun. Awọn ọja Atmel ko ṣe apẹrẹ tabi ti pinnu fun lilo ninu awọn ohun elo adaṣe ayafi ti pataki nipasẹ Atmel gẹgẹbi ite-ọkọ ayọkẹlẹ.
- Ti gba lati ayelujara lati: Arrow.com.
Awọn iwe aṣẹ / Awọn orisun
 |
Atmel ATF15xx-DK3 CPLD Development/Programmer Apo [pdf] Itọsọna olumulo ATF15xx-DK3 CPLD Apo Olupilẹṣẹ Idagbasoke, ATF15xx-DK3, Apo olupilẹṣẹ Idagbasoke CPLD, Apo olupilẹṣẹ Idagbasoke, Apo olupilẹṣẹ |
