Atmel ATF15xx-DK3 CPLD Atina'e/Polokalame Kit
Folasaga
O le Atmel® ATF15xx-DK3 Complex Programmable Logic Device (CPLD) Development/Programmer Kit o se faiga faʻaleleia atoatoa ma se polokalame faʻapipiʻi i totonu o le System (ISP) mo le Atmel ATF15xx Aiga o CPLD faʻataʻitaʻiga faʻapipiʻi faʻatasi ma Logic Doubling® foliga. O lenei pusa e maua ai e le au mamanu se auala vave ma faigofie e atiaʻe faʻataʻitaʻiga ma iloilo mamanu fou ma le ATF15xx ISP CPLD. O le ATF15xx Family of ISP CPLDs e aofia ai Atmel ATF15xxAS, ATF15xxASL, ATF15xxASV, ma ATF15xxASVL CPLDs. Faatasi ai ma le avanoa o laupapa faʻapipiʻi socket eseese e lagolago ai le tele o ituaiga afifi(1) o loʻo ofoina atu i le ATF15xx Family of ISP CPLDs, e mafai ona faʻaogaina lenei pusa e fai ma polokalame ISP e faʻapolokalame ai le ATF15xx ISP CPLDs i le tele o ituaiga afifi avanoa. (1) e ala i le alamanuia tulaga JTAG fa'aoga (IEEE 1149.1).
Pusa i totonu
- Atmel CPLD Development/Programmer Board (P/N: ATF15xx-DK3)
- Atmel 44-pin TQFP Socket Adapter Board (P/N: ATF15xx-DK3-SAA44)(2)
- Atmel ATF15xx LPT fa'avae JTAG ISP la'uina Uaea (P/N: ATDH1150VPC)
- Lua Atmel 44-pin TQFP Sample masini
Lagolago masini
O le ATF15xx-DK3 CPLD Development/Programmer Kit o lo'o lagolagoina ia masini nei i togi uma o Atmel o lo'o avanoa nei ma afifi (sei vagana ai le 100-PQFP):
- ATF1502AS/ASL
- ATF1504AS/ASL
- ATF1508ASV/ASVL
- ATF1502ASV
- ATF1504ASV/ASVL
- ATF1508AS/ASL
- E le ofoina atu le laupapa fa'apipi'i socket mo le 100-pin PQFP.
- E na'o le 44-pin TQFP Socket Adapter Board o lo'o i totonu o lenei pusa. O isi laupapa fa'apipi'i socket e fa'atau ese'ese. Va'ai le Vaega, "Fa'amatalaga Meafaigaluega" mo nisi fa'amatalaga i le socket adapter board code ordering codes.i
Vaega Fa'apitoa
CPLD Development/Programmer Board
- 10-pine JTAG-ISP Taulaga
- Fa'atonu Fa'atonuga Pulea Fa'atonu mo le 9VDC Punavai Malosi
- Filifilia 5V, 3.3V, 2.5V, poʻo le 1.8VI/O Voltage Sapalai
- Filifilia 1.8V, 3.3V, poʻo le 5.0V Core Voltage Sapalai
- 44-pin TQFP Socket Adapter Board
- Ulutala mo pine I/O o le ATF15xx Device
- 2MHz Crystal Oscillator
- Fa 7-vaega fa'aaliga LED
- E valu LED ta'ito'atasi
- E valu Suiga oomi
- Global Clear ma Output Fa'ataga Suiga Push-button
- Fua Fa'atasi o lo'o iai nei
Logic Doubling CPLDs
ATF15xx ISP CPLD faʻatasi ma Logic Doubling Architecture
- ATF15xx ISP Download Uaea
- 5V, 3.3V, 2.5V, poʻo le 1.8V ISP Download Uaea mo PC Lomitusi Faʻatasi (LPT) Taulaga
- PLD Development Software
- O lo'o avanoa i luga ole laiga i luga ole laiga mo le fa'aogaina e le fa'ailoga a le PLD le ATF15xx ISP CPLDs. Faamolemole faasino le Ovaview pepa, “PLD
- Fuafuaga Polokalama Ua Umaview” avanoa ile:
- http://www.atmel.com/images/atmel-3629-pld-design-software-overview.pdf
System Manaoga
- Ole la'ititi o masini ma masini komepiuta e mana'omia e fa'apolokalame ai se masini ATF15xx ISP CPLD ua mamanuina e fa'aaoga ai le Atmel ProChip Designer Software i luga ole CPLD Development/Programmer Board e ala ile Atmel ATMISP v6.x (ATF15xx CPLD ISP Software) o:
- x86 Microprocessor-fa'avae komepiuta
- Windows XP®, Windows® 98, Windows NT® 4.0, poʻo le Windows 2000
- 128-MByte RAM
- 500-MByte Free Hard Disk Space
- Isu lagolago Windows
- Avanoa Lomitusi Fa'atasi (LPT) Taulaga
- 9VDC Power Supply ma le 500mA o le sapalai o le taimi nei
- Mataitu SVGA (800 x 600 I'uga)
Fa'amatalaga Fa'atonu
| Atmel Vaega Numera | Fa'amatalaga |
| ATF15xx-DK3 | CPLD Development/Programmer Kit (e aofia ai le ATF15xxDK3-SAA44*) |
| ATF15xxDK3-SAA100 | 100-pin TQFP Socket Adapter Board mo DK3 Board |
| ATF15xxDK3-SAJ44 | 44-pin PLCC Socket Adapter Board mo DK3 Board |
| ATF15xxDK3-SAJ84 | 84-pin PLCC Socket Adapter Board mo DK3 Board |
| ATF15xxDK3-SAA44* | 44-pin TQFP Socket Adapter Board mo DK3 Board |
Fa'amatalaga Meafaigaluega
CPLD Development/Programmer Board
- O le CPLD Development/Programmer and Socket Adapter Boards o loʻo faʻaalia i le ata o loʻo i lalo o loʻo i ai vaega e aoga mo le atinaʻeina, faʻataʻitaʻiga, poʻo le iloiloga.
- ATF15xx CPLD mamanu. Fa'ailoga e avea ai lenei mea o se pusa amata / atina'e sili ona lelei ma se polokalame ISP mo le ATF15xx aiga o JTAG-ISP CPLD e aofia ai:
- Oomi-ki Suiga
- LED
- Fa'aaliga 7-vaega
- 2MHz Crystal Oscillator
- 5V, 3.3V, 2.5V, poʻo le 1.8V VCCIO Filifilia
- 1.8V, 3.3V, poʻo le 5.0V VCCINT Filifili
- JTAG Taulaga ISP
- Socket Adapters
- Fa'aaliga 7-vaega fa'atasi ai ma Fa'aoso Filifilia
- O le CPLD Development/Programmer Board o lo'o iai fa'aaliga e 7-vaega e fa'atagaina ai le mata'ituina o galuega a le ATF15xx CPLD. O faʻaaliga nei e fa o loʻo faʻaigoaina o le DSP1, DSP2, DSP3, ma le DSP4. O faʻaaliga 7-vaega o loʻo i ai faʻamaʻi masani o le anode faʻatasi ma laina anode masani e fesoʻotaʻi ma le VCCIO (I/O supply vol.tage mo le CPLD) e ala i se faʻasologa o faʻalavelave faʻatasi ai ma tagata osooso filifilia e faʻaigoaina o le JPDSP1, JPDSP2, JPDSP3, ma le JPDSP4. O nei osooso e mafai ona aveese i
fa'agata fa'aaliga e ala i le fa'a'esea o le VCCIO i fa'aaliga. O laina cathode taʻitasi e fesoʻotaʻi atu i pine I / O o le ATF15xx CPLD i luga ole CPLD - Atina'e/Polokalame Kit. Ina ia faʻaalia se vaega faapitoa, e aofia ai le DOT o se faʻaaliga, o le ATF15xx I / O pine e fesoʻotaʻi ma lenei vaega o le LED e tatau ona i ai i se tulaga maualalo maualalo ma le seti jumper e mafai ona filifilia; o le mea lea, o gaioiga a le masini ATF15xx o le a manaʻomia ai le faʻatulagaina mo gaioiga faʻamalosi-maualalo i le mamanu file. O fa'aaliga e sili ona lelei ile 2.5V VCCIO pe maualuga.
- O vaega ta'itasi o fa'aaliga ta'itasi o lo'o fa'apipi'iina i se tasi pine I/O o le masini ATF15xx. Mo masini e sili atu le numera o pine (100-pin ma sili atu), o vaega uma e fitu ma vaega DOT o faʻaaliga e fa e fesoʻotaʻi i pine I / O; ae ui i lea, mo masini numera pine pito i lalo, e naʻo se vaega o faʻaaliga, muamua ma le fa faʻaaliga, e fesoʻotaʻi i pine I/O a le masini ATF15xx. Laulau 1 ma le 2 o loʻo faʻaalia ai le 7-vaega faʻaaliga afifi fesoʻotaʻiga i le masini ATF15xx. O lo'o fa'aalia i le ata o lo'o i lalo le fa'asologa o fa'aaliga ma osooso.
Ata 2. Fa'ata'ita'i Si'osi'omaga o Fa'aaliga 7-vaega ma Fa'aoso
Laulau 1.ATF15xx 44-pin Feso'ota'iga i Fa'aaliga 7-vaega
| 44-pin TQFP | |||
| DSP/Vaega | PLD Pin | DSP/Vaega | PLD Pin |
| 1/A | 27 | 3/A | NC |
| 1/B | 33 | 3/B | NC |
| 1/C | 30 | 3/C | NC |
| 1/D | 21 | 3/D | NC |
| 1/E | 18 | 3/E | NC |
| 1/F | 23 | 3/F | NC |
| 1 G | 20 | 3 G | NC |
| 1/TOTO | 31 | 3/TOTO | NC |
| 2/A | NC | 4/A | 3 |
| 2/B | NC | 4/B | 10 |
| 2/C | NC | 4/C | 6 |
| 2/D | NC | 4/D | 43 |
| 2/E | NC | 4/E | 35 |
| 2/F | NC | 4/F | 42 |
| 2 G | NC | 4 G | 34 |
| 2/TOTO | NC | 4/TOTO | 11 |
| PLCC 44-pin | |||
| DSP/Vaega | PLD Pin | DSP/Vaega | PLD Pin |
| 1/A | 33 | 3/A | NC |
| 1/B | 39 | 3/B | NC |
| 1/C | 36 | 3/C | NC |
| 1/D | 27 | 3/D | NC |
| 1/E | 24 | 3/E | NC |
| 1/F | 29 | 3/F | NC |
| 1 G | 26 | 3 G | NC |
| 1/TOTO | 37 | 3/TOTO | NC |
| 2/A | NC | 4/A | 9 |
| 2/B | NC | 4/B | 16 |
| 2/C | NC | 4/C | 12 |
| 2/D | NC | 4/D | 5 |
| 2/E | NC | 4/E | 41 |
| 2/F | NC | 4/F | 4 |
| 2 G | NC | 4 G | 40 |
| 2/TOTO | NC | 4/TOTO | 17 |
Laulau 2.ATF15xx 84-pin ma 100-pin Feso'ota'iga ile 7-vaega Fa'aaliga
| PLCC 84-pin | |||
| DSP/Vaega | PLD Pin | DSP/Vaega | PLD Pin |
| 1/A | 68 | 3/A | 22 |
| 1/B | 74 | 3/B | 28 |
| 1/C | 70 | 3/C | 25 |
| 1/D | 63 | 3/D | 21 |
| 1/E | 58 | 3/E | 16 |
| 1/F | 65 | 3/F | 17 |
| 1 G | 61 | 3 G | 12 |
| 1/TOTO | 73 | 3/TOTO | 29 |
| 2/A | 52 | 4/A | 5 |
| 2/B | 57 | 4/B | 10 |
| 2/C | 55 | 4/C | 8 |
| 2/D | 48 | 4/D | 79 |
| 2/E | 41 | 4/E | 76 |
| 2/F | 50 | 4/F | 77 |
| 2 G | 45 | 4 G | 75 |
| 2/TOTO | 50 | 4/TOTO | 11 |
| 100-pin TQFP | |||
| DSP/Vaega | PLD Pin | DSP/Vaega | PLD Pin |
| 1/A | 67 | 3/A | 13 |
| 1/B | 71 | 3/B | 19 |
| 1/C | 69 | 3/C | 16 |
| 1/D | 61 | 3/D | 8 |
| 1/E | 57 | 3/E | 83 |
| 1/F | 64 | 3/F | 6 |
| 1 G | 60 | 3 G | 92 |
| 1/TOTO | 75 | 3/TOTO | 20 |
| 2/A | 52 | 4/A | 100 |
| 2/B | 54 | 4/B | 94 |
| 2/C | 47 | 4/C | 97 |
| 2/D | 41 | 4/D | 81 |
| 2/E | 46 | 4/E | 76 |
| 2/F | 40 | 4/F | 80 |
| 2 G | 45 | 4 G | 79 |
| 2/TOTO | 56 | 4/TOTO | 93 |
LEDs ma Fa'ato'a Filifilia
O le CPLD Development / Programmer Board e valu taʻiala taʻitoʻatasi, lea e mafai ai e tagata mamanu ona faʻaalia faailoilo faʻaalia mai le tagata faʻaoga I / Os o masini ATF15xx. O nei LED e valu o loʻo faʻaigoaina LED1 i le LED8 i luga ole CPLD Development/Programmer Board. O le cathode o LED taʻitasi e fesoʻotaʻi i le Ground (GND) e ala i se faʻasologa faʻasolosolo, aʻo fesoʻotaʻi le anode o LED taʻitasi i se tagata faʻaoga I / O pine o le CPLD e ala i le JPL1/2/3/4/5/6/7 /8 filifili osooso. O nei osooso e mafai ona aveese e faʻamalo ai le LED e ala i le le faʻaogaina o anodes o le LED i pine I / O o le CPLD. O le ata o loʻo i lalo o loʻo faʻaalia ai le faʻataʻitaʻiga faʻataʻitaʻiga o LED faʻatasi ai ma le osooso filifilia.
Ina ia faʻaalia se LED faʻapitoa, o le ATF15xx I / O pine e fesoʻotaʻi ma le LED e tatau ona i ai i se tulaga maualuga faʻatatau ma le seti jumper fetaui; o le mea lea, o gaioiga a le masini ATF15xx o le a manaʻomia ona faʻatulagaina e avea ma galuega maualuga maualuga. O LED e sili ona lelei ile 2.5V VCCIO pe maualuga.
O masini pito i lalo (44-pin) e na'o le fa I/Os e feso'ota'i ile LED1/2/3/4. Mo masini e sili atu le numera o pine (100-pin ma sili atu), e valu uma LED e fesoʻotaʻi i le I/Os o le masini. Laulau 3 o loʻo faʻaalia ai fesoʻotaʻiga afifi eseese o le CPLD I / Os i le LED.
Laulau 3.ATF15xx Feso'ota'iga i LED
| 44-pin TQFP | |
| LED | PLD Pin |
| LED1 | 28 |
| LED2 | 25 |
| LED3 | 22 |
| LED4 | 19 |
| PLCC 44-pin | |
| LED | PLD Pin |
| LED1 | 34 |
| LED2 | 31 |
| LED3 | 28 |
| LED4 | 25 |
| PLCC 84-pin | |
| LED | PLD Pin |
| LED1 | 69 |
| LED2 | 67 |
| LED3 | 64 |
| LED4 | 60 |
| LED5 | 27 |
| LED6 | 24 |
| LED7 | 18 |
| LED8 | 15 |
| 100-pin TQFP | |
| LED | PLD Pin |
| LED1 | 68 |
| LED2 | 65 |
| LED3 | 63 |
| LED4 | 58 |
| LED5 | 17 |
| LED6 | 14 |
| LED7 | 10 |
| LED8 | 9 |
Su'i fa'amau fa'atasi ma Fa'aoso Filifilia mo pine I/O
- O le CPLD Development/Programmer Board o lo'o i ai sui e valu fa'amau, e feso'ota'i i pine I/O o le CPLD. O suiga e lafo atu fa'ailoga fa'aoga i le tagata fa'aoga I/O pine o le masini ATF15xx. O nei ki o lo'o fa'aigoaina SW1 i le SW8 ile CPLD Development/Programmer
Komiti Fa'atonu. O le tasi pito o ki fa'aoga fa'aoga e feso'ota'i atu i le VCCIO, a'o le isi pito o ki fa'amau ta'itasi o lo'o feso'ota'i atu i le toso i lalo ma fa'afeso'ota'i i le pine I/O patino o le CPLD e ala i le JPS1/2. /3/4/5/6/7/8 filifili osooso. - Afai e oomiina se tasi o nei ki ma ua setiina le osooso fetaui, o le pine I/O patino o le masini o le a aveina atu i se tulaga maualuga maualuga e ala i le gaosiga o le kiliva. Talu ai e feso'ota'i fo'i ki fa'amau ta'itasi i se fa'ato'a toso i lalo, o le a iai se tulaga maualalo o le fa'aoga pe a le oomiina le ki i le seti osooso. Afai e le o setiina le osooso faamau, o le pine tutusa o le a faia o se pine e le fesootai. Ata 4 ose fa'ata'amilosaga o le ki oomi ma le osooso e mafai ona filifili. O le Siata 4 o loʻo faʻaalia ai fesoʻotaʻiga o nei suiga e valu i le CPLD I/O pine i ituaiga afifi eseese.
Laulau 4.ATF15xx Feso'ota'iga i Suiga Pin I/O
| 44-pin TQFP | |
| Oomi Faamau | PLD Pin |
| SW1 | 15 |
| SW2 | 14 |
| SW3 | 13 |
| SW4 | 12 |
| SW5 | 8 |
| SW6 | 5 |
| SW7 | 2 |
| SW8 | 44 |
| PLCC 44-pin | |
| Oomi Faamau | PLD Pin |
| SW1 | 21 |
| SW2 | 20 |
| SW3 | 19 |
| SW4 | 18 |
| SW5 | 14 |
| SW6 | 11 |
| SW7 | 8 |
| SW8 | 6 |
| PLCC 84-pin | |
| Oomi Faamau | PLD Pin |
| SW1 | 54 |
| SW2 | 51 |
| SW3 | 49 |
| SW4 | 44 |
| SW5 | 9 |
| SW6 | 6 |
| SW7 | 4 |
| SW8 | 80 |
| 100-pin TQFP | |
| Oomi Faamau | PLD Pin |
| SW1 | 48 |
| SW2 | 36 |
| SW3 | 44 |
| SW4 | 37 |
| SW5 | 96 |
| SW6 | 98 |
| SW7 | 84 |
| SW8 | 99 |
Su'i fa'amau fa'atasi ma Fa'aoso Filifilia mo pine GCLR ma OE1
O le CPLD Development/Programmer Board o lo'o iai ki e lua fa'amau mo le Global Clear (GCLR) ma le Output Enable (OE1) pine o le CPLD. O suiga e pulea ai tulaga fa'atatau o le OE1 ma le GCLR fa'aoga o masini ATF15xx. O nei ki o lo'o fa'ailoga SW-GCLR ma SW-GOE1 i luga o le laupapa. O le tasi pito o le SW-GCLR o lo'o fa'aoga ki fa'amau fa'amau e feso'ota'i ile GND. O le isi pito o
o lo'o feso'ota'i le ki fa'atosina i se fa'a toso i luga i le VCCIO ona fa'afeso'ota'i lea i le pine fa'aulu fa'apitoa a le GCLR ole masini ATF15xx. O lo'o fa'amoemoe e fa'aoga e fai ma fa'ailoga toe fa'aola-maualalo e toe fa'afo'i tusi resitala i le masini ATF15xx fa'atasi ai ma le JPGCLR filifili jumper seti. E fa'apena fo'i, o le tasi pito o le SW-GOE1 fa'aoga fa'amau fa'amau e feso'ota'i ile GND. Le isi pito o le ki oomi
o lo'o feso'ota'i atu i le toso i luga i le VCCIO ona fa'afeso'ota'i lea i le pine fa'apipi'i tu'ufa'atasi OE1 o le masini ATF15xx. O lo'o fa'amoemoe e fa'aaogaina e avea o se fa'ailo e mafai ai ona fa'atonutonu le fa'aagaoioiga/fa'aletonu o fa'aupuga o le tri-setete i le ATF15xx fa'atasi ai ma le JPGOE filifili fa'aputu osooso. Ata 5 o le ata fa'ata'amilosaga o ki fa'amau ma fa'aoso mo pine GCLR ma OE1.
Afai e oomiina so'o se tasi o nei kiki ma fa'apipi'i le oso fa'atatau, o le I/O fa'apitoa o le CPLD o le a ave i se tulaga maualalo. Talu ai ona o lo'o fa'afeso'ota'i fo'i fa'amau ta'itasi i le toso i luga, o le fa'aogaina o le CPLD o le ai ai se tulaga maualuga pe afai e le oomiina le ki fa'amau ma le seti jumper filifilia. Afai e le o setiina le osooso filifilia, o le pine fa'amau tu'ufa'atasiga o le CPLD e mafai ona ta'ua o se pine No Connect (NC). O le Siata 5 o lo'o fa'aalia ai le pine numera o le GCLR ma le OE1 fa'apipi'i fa'aoga pine o masini ATF15xx i ituaiga uma o afifi avanoa.
Ata 5. Fa'ata'ita'i Fa'ata'ita'i o Su'i fa'amau ma Fa'aoso Filifilia mo GCLR ma OE1
Laulau 5. Pin Numera o GCLR ma OE1
| 44-pin TQFP | PLCC 44-pin | PLCC 84-pin | 100-pin TQFP | |
| GCLR | 39 | 1 | 1 | 89 |
| OE1 | 38 | 44 | 84 | 88 |
2MHz Oscillator ma le Uati Filifilia Jumper
O le Uati Filifilia Jumper ua faaigoaina o le JP-GCLK i luga o le CPLD Development/Programmer Board ose tulaga e lua-tulaga e mafai ai e tagata faaaoga ona filifili po o le fea GCLK faʻapipiʻiina pine faʻaoga (poʻo le GCLK1 poʻo le GCLK2) o le masini ATF15xx e tatau ona fesoʻotaʻi i le gaosiga o le 2MHz oscillator. E le gata i lea, e mafai ona aveese le osooso ina ia mafai ai ona faʻafesoʻotaʻi se puna o le uati i fafo i le GCLK1 ma / poʻo le GCLK2 o le masini ATF15xx. Ata 6 o se fa'ata'ita'iga o le fa'ata'amilosaga o le oscillator ma le fa'aoso filifiliga. O le Siata 6 o lo'o fa'aalia ai numera pine mo le GCLK1 ma le GCLK2 pine fa'apipi'i o le masini ATF15xx i ituaiga uma o afifi o lo'o avanoa.
Afai e seti le osooso GCLK1, o le a tu le osooso i le itu o le laupapa. I le isi itu, afai e seti le GCLK2 osooso, o le osooso o le a tu i le ogatotonu o le laupapa.
Laulau 6. Pin Numera o GCLK1 ma GCLK2
| 44-pin TQFP | PLCC 44-pin | PLCC 84-pin | 100-pin TQFP | |
| GCLK1 | 37 | 43 | 83 | 87 |
| GCLK2 | 40 | 2 | 2 | 90 |
VCCIO ma VCCINT Voltagu Filifiliga O'a ma LED
- O le VCCIO ma le VCCINT Voltage Filifilia Jumpers, fa'ailoga VCCIO Selector ma VCCINT Selector i luga ole ATF15xx-DK3 Development/Programming Kit, fa'ataga le filifiliga o le I/O sapalai
- voltage maualuga (VCCIO) ma sapalai autu voltage maualuga (VCCINT) o loʻo faʻaaogaina mo le CPLD taulaʻi i luga o le pusa. O le taimi lava e fa'apipi'i sa'o ai nei mea osooso, o le a kilia loa LED (fa'ailoga VCCINT LED ma VCCIO LED); ae ui i lea, i le maualalo o sapalai voltage maualuga (ie 2.5V po'o lalo ifo), atonu e matua'i fa'alilolilo LED.
- Mo ATF15xxAS/ASL (5.0V) CPLDs, e tatau ona seti uma le VCCIO Selector ma le VCCINT Selector jumpers i le 5.0V.
- Mo ATF15xxASV/ASVL (3.3V) CPLDs, ole VCCIO Selector ma VCCINT Selector Jumpers e tatau ona seti ile 3.3V na'o.
- Ole malosi ole CPLD Development/Programmer Kit e tatau ona tape pe a suia le tulaga ole VCCIO po'o le VCCINT Voltage Filifilia So'a (VCCIO Filifilia po'o VCCINT Filifiliga).
- ICCIO ma ICCINT Jumpers
- Ole ICCIO ma le ICCINT jumpers e mafai ona aveese ma fa'aoga e fai ma fua ole ICC. A aveese le osooso, e mafai ona faʻafesoʻotaʻi mita o loʻo i ai nei i pou e fua ai le taumafa o loʻo i ai nei o le CPLD faʻamoemoe. Pe a le fa'aogaina e tagata fa'aoga nei mea osooso e fua ai le taimi nei, e tatau ona fa'atulaga nei mea osooso ina ia fa'agaioi ai le pusa ma le CPLD.
- Voltagu Pule Faatonu
- Lua voltage fa'atonu, fa'aigoaina VR1 ma VR2, e fa'aaogaina e fa'atupu tuto'atasi ma fa'atonutonu le
- VCCINT ma VCCIO voltage mai le eletise 9VDC. Mo fa'amatalaga, fa'amolemole va'ai le ata o le kit ATF15xx-DK3, Ata 12.
- Suiga Sapalai Malosiaga ma LED Malosiaga
- O le Suiga o le Malosiaga, faʻailoga POWER SWITCH, e mafai ona fesuiaʻi i luga pe tape le tulaga, lea e faʻaaogaina e ki ai pe tape ai le mana o le laupapa ATF15xx-DK3. E faʻatagaina le 9VDC voltagu i le Power Supply Jack e pasi atu i le voltage fa'atonu pe a i ai i luga o le tulaga. Pe a ki le Suiga Sapalai Malosiaga, o le a moli le Malosiaga (fa'ailoga POWER LED) e ta'u mai ai o le ATF15xx-DK3 Kit o lo'o maua i le mana.
- Siaki Sapalai Malosiaga ma Ulutala Malosiaga
- O le laupapa ATF15xx-DK3 o loʻo iai ituaiga eseese e lua o fesoʻotaʻiga eletise e faʻaigoaina JPower ma JP Power. E mafai ona fa'aoga so'o se tasi o nei feso'ota'iga eletise e fa'afeso'ota'i ai se puna eletise 9VDC i le pusa. O le feso'ota'iga muamua o le eletise ua fa'aigoaina o le JPower, o le pa'u pa'u pa'u pa'u ma le pou e 2.1mm le lautele, ma e fa'atasi ma le 2.1mm (le lautele i totonu) x 5.5mm (le lautele i fafo) so'o fafine. O le ulutala lona lua o le sapalai eletise ua faaigoaina o le JP Power, o le 4-pin male 0.100″ ulutala ma le 0.025″ sikuea sikuea. O le maua o nei ituaiga e lua o feso'ota'iga eletise e mafai ai e tagata fa'aoga ona filifili le ituaiga o mea fa'aoga eletise e fa'aoga mo le ATF15xx-DK3 Development/Programmer Kit.
- E na'o le tasi o nei feso'ota'iga eletise e lua e tatau ona fa'aola ile puna 9VDC ae le'o lua i le taimi e tasi.
- JTAG Fa'afeso'ota'i ISP ma TDO Filifiliga Jumper
- O le JTAG ISP Connector ua faaigoaina JTAG-IN, faʻaaogaina e faʻafesoʻotaʻi le ATF15xx JTAG pine uafu (TCK, TDI, TMS, ma TDO) e ala i le ISP download cable i le lomitusi tutusa (LPT) uafu o se PC mo JTAG Polokalame ISP ole masini ATF15xx. O feso'ota'iga polarized e fa'aoga ile ATF15xx-DK3 ma le ISP Download Cable e fa'aitiitia ai fa'afitauli feso'ota'iga. Ole igoa PIN1 ile pito i lalo ole JTAG Fa'afeso'ota'i ISP o lo'o fa'ailoa mai ai le pine 1 o le ulutala 10-pin ma fa'aitiitia ai le avanoa e feso'ota'i sese ai le ISP Download Cable.
- I le agavale o le JTAG-IN fesoʻotaʻiga, e lua koluma o vias, ma ua faʻaigoaina JTAG-IFO. Ua faʻamoemoe e faʻatagaina tagata faʻaoga e fatuina se JTAG filifili daisy e faatino ai le JTAG galuega i le tele o masini. E manaʻomia e tagata faʻaoga le faʻapipiʻiina o le ituaiga fesoʻotaʻiga tutusa e pei o le mea na faʻaaogaina mo JTAG- IN i totonu o le JTAG-OUT tulaga ina ia mafai ona faʻaogaina lenei avanoa avanoa.
- Ina ia faia se JTAG filifili daisy e faʻaaoga ai le tele o laupapa ATF15xx-DK3, o le TDO Selection Jumper, faʻailoga JP-TDO, e tatau ona seti i le tulaga talafeagai. Mo masini uma i le filifili daisy vagana ai le masini mulimuli, e tatau ona seti lenei oso i le tulaga TO NEXT DEVICE. Mo le masini mulimuli i le filifili, e tatau ona seti lenei oso i le tulaga TO ISP CABLE. A o'o le tagata osooso i le tulaga TO NEXT DEVICE, o le TDO o lena JTAG o le a feso'ota'i le masini i le TDI o le isi
- JTAG masini i le filifili. A o'o le tagata osooso i le tulaga TO ISP CABLE, o le TDO o lena masini o le a feso'ota'i i le TDO o le J.TAG 10-pin connector, lea e mafai ai ona toe fa'afo'i atu le faailo TDO o lena masini i le filifili i le PC talimalo ma le polokalama ISP. O le ata o lo'o i lalo o se fa'asologa o le
- JTAG feso'ota'iga ma le JP-TDO osooso. O le laulau o loʻo i lalo o loʻo lisiina ai numera pine o le fa JTAG pine mo le masini ATF15xx i pusa uma e maua.
Mo se seti masini e tasi, o le tulaga o le JP-TDO jumper e tatau ona seti i TO ISP CABLE.
Ata 7. Fa'ata'amilosaga o le JTAG ISP Connectors ma TDO Jumper
- Laulau 7. Numera pine o le JTAG Faailoga Taulaga
| 44-pin TQFP | PLCC 44-pin | PLCC 84-pin | 100-pin TQFP | |
| TDI | 1 | 7 | 14 | 4 |
| TDO | 32 | 38 | 71 | 73 |
| TMS | 7 | 13 | 23 | 15 |
| TCK | 26 | 32 | 62 | 62 |
O le ISP algorithm o loʻo pulea e le ATMISP software, lea o loʻo taʻavale i luga o le PC. O le fa JTAG fa'ailoga e fa'atupuina e le uafu LPT, ma o lo'o fa'asalaina e le ISP download cable a'o le'i alu i totonu o le masini ATF15xx i luga o le CPLD Development/Programmer board. O le 10-pin JTAG Port Header pinout i luga o le CPLD Development/Programmer board o loʻo faʻaalia i le Ata 8, ma le tele o lenei 10-pin male JTAG ulutala o loʻo faʻaalia i le Ata 9.
Ata 8. 10-pin JTAG Port Header Pinout
- O le 10-pin JTAG Port Header pinout e fetaui lelei ma le ATDH1150PC/VPC LPT uaea fa'avae uaea ma le ATDH1150USB USB uaea fa'avae, fa'apea fo'i ma le Altera.
- ByteBlaster/MV/II LPT uaea fa'avae. E le gata i lea, o le polokalama ATMISP v6.7 e mafai ai ona faʻaogaina le Atmel
- ATDH1150PC / VPC / USB cable poʻo le ByteBlaster / MV / II cable e faʻatino ai le ISP.
- ATMISP v7.0 na'o le lagolagoina o le ATDH1150USB cable.
- Socket Fetuunaiga laupapa
- O le ATF15xx-DK3 CPLD Development/Programmer Socket Adapter Boards (ATF15xx-DK3-XXXXX) o laupapa faʻasalalau ia e fesoʻotaʻi ma le ATF15xx-DK3 CPLD Development/Programmer Board. E fa'aogaina fa'atasi ma le ATF15xx-DK3 CPLD Development/Programmer Board e iloilo pe fa'apolokalame masini ATF15xx ISP CPLD i ituaiga afifi eseese. E fa Socket Adapter Boards e avanoa mo le ATF15xx-DK3 e aofia ai le 44-TQFP, 44-PLCC, 84-PLCC, ma le 100-
- TQFP ituaiga afifi i le ATF15xx aiga o CPLDs.
- O laupapa fa'apipi'i socket ta'itasi o lo'o i ai se socket mo le masini ATF15xx ma e iai ulutala tama i le pito i lalo, fa'ailoga JP1 ma JP2. O ulutala i le pito i lalo e fetaui ma ulutala tamaitai i luga o le laupapa ATF15xx-DK3, faʻailoga JP4 ma JP3. O fa'aaliga fa 7-vaega, ki fa'amau,
- JTAG faʻailoga uafu, oscillator, VCCINT, VCCIO, ma le GND i luga o le CPLD Development / Programmer Board e fesoʻotaʻi atu i le masini ATF15xx i luga o le Socket Adapter Board e ala i nei seti e lua o fesoʻotaʻiga.
- I le pito i luga ole 44-TQFP socket adapter, e fa 10-pin connectors ma tutusa fua ma le J.TAG feso'ota'iga ISP. O pine o nei feso'ota'iga e fa o lo'o feso'ota'i atu i le fa'aoga ma I/O pine (sei vagana ai le fa JTAG pine) o le masini CPLD sini. E mafai ona faʻaogaina e faʻafesoʻotaʻi i se oscilloscope poʻo se suʻesuʻega faʻapitoa e puʻeina ai gaioiga o le faʻaoga ma I / O pine o le CPLD. E mafai fo'i ona fa'aoga e fa'afeso'ota'i le fa'aoga ma I/O pine o le CPLD i isi laupapa i fafo po'o masini mo su'esu'ega o le tulaga o le faiga.
- Atmel ATF15xx ISP Download Uaea
- O le ATF15xx ISP Download Cable (P/N: ATDH1150VPC) fa'afeso'ota'i le LPT uafu o le PC i le 10-pin JTAG ulutala i luga ole CPLD Development/Programmer Board po'o se laupapa fa'aleaganu'u masani. O lo'o fa'aalia i le Ata 10. O lenei uaea ISP e fai ma pa'u e puipui ai le JTAG faailoilo i le va o le PC LPT uafu ma le ATF15xx i luga o le laupapa matagaluega. O le Power-On LED i tua o le 25-pin male connector house e fa'ailoa mai ai o lo'o feso'ota'i lelei le uaea.
- Ia mautinoa o loʻo ki le LED aʻo leʻi faʻaaogaina le Atmel CPLD ISP Software (ATMISP).
- O lenei ISP cable e aofia ai se 25-pin (DB25) male connector, lea e fesoʻotaʻi i le LPT port o se PC. O le polo fafine 10-pin e feso'ota'i i le 10-pin male JTAG ulutala i luga ole laupapa matagaluega ISP. O le laina lanu mumu i luga o le uaea lipine o lo'o fa'ailoa mai ai le fa'atonuga o le pine 1 o le polo fafine. O le 10-pin male JTAG ulutala ile CPLD
- Atina'e/Polokalame Komiti ua polarized e taofia tagata faaaoga mai le faaofiina o le palaka fafine i le tulaga sese.
- O le CPLD Development/Programmer kits e aofia ai le ATF15xx ISP Download Cable
(ATDH1150VPC); ae ui i lea, e mafai foi ona fa'aoga isi uaea ISP lagolago. O le ATDH1150VPC, ATDH1150USB, ByteBlasterMV, ma le ByteBlasterII uaea e mafai ona faʻaogaina mo le ATF15xx/ASL (5V) ma le ATF15xxASV/ASVL (3.3V) masini, ae o le ATDH1150PC tuai ma le ByteBlaster/ATF15 uaea e mafai ona faʻaogaina mo uaea. na'o.
- Ata 11 o lo'o fa'aalia ai le pine fa'aulu tama'ita'i 10-pin mo le ATF15xx ISP Download Cable. O le 10-pin male header pinout i luga o le PC board (pe a fa'aoga mo le ISP) e tatau ona fetaui ma le pine lea.
- Fa'aaliga: E tatau ona tu'uina atu e le komiti matagaluega le VCC ma le GND i le CPLD ISP Cable e ala i le 10-pin male header.
Ata fa'ata'atia
Fa'asinomaga ma le Lagolago
Mo fa'aopoopo PLD design software fa'asinomaga ma lagolago, fa'amaumauga e pei ole fesoasoani files, aʻoaʻoga, faʻamatalaga / faʻamatalaga, ma taiala faʻaoga o loʻo avanoa ile www.atmel.com.
Atmel ProChip Designer Software
Laulau 8. ProChip Designer References and Support
| ProChip Designer | Mai le autu autu o le ProChip window menu… |
| Fesoasoani | Filifili Fesoasoani > Prochip Designer Fesoasoani. |
| A'oa'oga | Filifili Fesoasoani > A'oa'oga. |
| Faafitauli ma Fofo ua iloa | Filifili Fesoasoani > Review KPS. |
Atmel WinCUPL Software
Laulau 9. WinCUPL References and Support
| WinCUPL | Mai le autu WinCUPL window menu… |
| Fesoasoani | Filifili Fesoasoani > Mataupu. |
| CUPL Programmers Reference Guide | Filifili Fesoasoani > CUPL Programmers Reference. |
| A'oa'oga | Filifili Fesoasoani > Atmel Info > Tutorial1.pdf. |
| Faafitauli ma Fofo ua iloa | Filifili Fesoasoani > Atmel Info > CUPL_BUG.pdf. |
Atmel ATMISP Polokalama
Laulau 10. ATMISP Fa'asinomaga ma Lagolago
| ATMISP | Mai le lisi autu o le faamalama ATMISP… |
| Fesoasoani Files | Filifili Fesoasoani > Fesoasoani ile ISP. |
| A'oa'oga | Filifili Fesoasoani > ATMISP Aoaoga. |
| Faafitauli ma Fofo ua iloa | Fa'aaogā le su'esu'ega a le Windows Explorer, su'e le pusa ATMISP ma tatala le readme.txt file fa'atasi ai ma se fa'atonu tusitusiga ASCII. |
Atmel POF2JED Conversion Software
Laulau 11. POF2JED Fa'asinomaga ma Lagolago
| POF2JED | Mai le lisi autu o le faamalama POF2JED… |
| ATF15xx Fa'aliliuga Fa'amatalaga Pu'upu'u | Filifili Fesoasoani > Filifiliga Liua. |
Lagolago Fa'atekinisi
- Mo fesoasoani fa'apitoa i so'o se mataupu e feso'ota'i ma Atmel PLD, fa'afeso'ota'i le Atmel PLD Applications Group ile:
- imeli pld@atmel.com
- Telefoni (+1)408-436-4333
- Pepa Lagolago i luga ole laiga http://support.atmel.com/bin/customer.exe
Toe Iloilo Tala'aga
| Toe Iloiloga | Aso | Fa'amatalaga |
| 3605C | 06/2014 | Fa'afou ata, fa'ata'ita'iga, logos, ma itulau fa'ate'a. Faaopoopo i ai le vaega o le Toefuataiga o Talafaasolopito. |
| 3605B | 05/2008 |
- Atmel Corporation 1600 Technology Drive, San Jose, CA 95110 ISA T: (+1)(408) 441.0311 F: (+1)(408) 436.4200 | www.atmel.com
- © 2014 Atmel Corporation. / Rev.: Atmel-3605C-CPLD-ATF15xx-DK3-Development-Kit-UserGuide_062014.
- Atmel®, Atmel logo ma tu'ufa'atasiga o ia mea, Enabling Unlimited Possibilities, ma isi o fa'ailoga fa'ailoga po'o fa'ailoga fa'ailoga a le Atmel Corporation i le US ma
isi atunuu. O isi faaupuga ma igoa o oloa atonu o fa'ailoga fa'atau a isi. - FA'AVAE: O faʻamatalaga i totonu o lenei pepa o loʻo tuʻuina atu e fesoʻotaʻi ma Atmel oloa. Leai se laisene, fa'aalia pe fa'aalia, e ala i le estoppel po'o se isi mea, i so'o se aia tatau tau le atamai e tu'uina atu e lenei pepa po'o le feso'ota'iga ma le fa'atauga o oloa Atmel.
- VAGANA UA FAATUATUA I LE ATMEL TU'UGA MA TU'UGA O FA'atau O LO'O I LE ATMEL. WEBSITE, ATMEL E LEAI SE NOFOAIGA MA TA'EINA SO'O SE FA'AALIGA FA'AALIGA, FA'AMATALAGA, PO'O LE TULAFONO E FA'ASA'I I ANA O'O'OGA E A'OFIA AI, AE LE FA'ATA'A I, LE FA'AALIGA FA'AALIGA O FA'AIGA FA'A'OA'OGA, FA'AMATALAGA MO SE FA'AVAE FA'AVAE. IN
- E LEAI SE MEA E TATAU ATMEL MO SO'O SE TU'U, LE'O, FA'AUGA, FA'ASA'O, FA'AMATALAGA, PO'O FA'AMATALAGA FA'AMATALAGA (E A'OA'O AI, A'OA'OGA FA'ATA'A, FA'ALA MO LE TO'I MA POTO, FA'AMATALAGA PISISI, PO'O LE MA'UINA O FA'AMATALAGA O LE FA'AOGAINA) O LE FAAMANUIA LENEI, E TUSA UA FAATUATUA A ATMEL I LE AVANOA O FAIGA FAALEAGA.
- E le faia e Atmel ni fa'amatalaga po'o ni fa'amaoniga e tusa ai ma le sa'o po'o le atoatoa o mea o lo'o i totonu o lenei mea
pepa ma fa'aagaga le aia tatau e fai ai suiga i fa'amatalaga ma fa'amatalaga o oloa i so'o se taimi e aunoa ma se fa'aaliga. E le faia e Atmel se tautinoga e faʻafouina faʻamatalaga o loʻo i totonu. Se'i vagana ua tu'uina atu i se isi itu, o oloa Atmel e le talafeagai mo, ma e le tatau ona fa'aaogaina i totonu, mea tau ta'avale. Atmel oloa e le o faʻamoemoeina, faʻatagaina, pe faʻamaonia mo le faʻaaogaina e fai ma vaega i talosaga e faʻamoemoe e lagolago pe tausia le ola. - FA'AALIGA FA'AVAE FA'AMATALAGA, MILITA, MA TA'ITA'IGA FA'AVAE: Atmel oloa e le o fuafuaina mo ma o le a le faʻaaogaina e fesoʻotaʻi ma soʻo se talosaga pe a le manuia o ia oloa e ono faʻamoemoeina e mafua ai se manuʻa ogaoga poʻo le maliu ("Talosaga Faʻatauvaʻa-Saogalemu") e aunoa ma se faʻamatalaga patino a le Atmel.
- malie. Saogalemu-Critical Applications e aofia ai, e aunoa ma le faatapulaaina, masini lagolago ola, ma faiga, meafaigaluega po o faiga mo le faagaoioiga o nofoaga faaniukilia ma faiga auupega.
- O oloa a Atmel e le o fuafuaina pe fa'amoemoeina mo le fa'aogaina i totonu o le militeri po'o le va'alele po'o si'osi'omaga se'i vagana ua fa'atonuina e Atmel e avea ma vaega-militeri. Atmel oloa e le o fuafuaina pe faʻamoemoeina mo le faʻaaogaina i mea tau taʻavale seʻi vagana ua faʻamaonia faapitoa e Atmel e avea ma taʻavale-grade.
- La'uina mai: Arrow.com.
Pepa / Punaoa
 |
Atmel ATF15xx-DK3 CPLD Atina'e/Polokalame Kit [pdf] Taiala mo Tagata Fa'aoga ATF15xx-DK3 CPLD Atina'e Polokalame Pusa, ATF15xx-DK3, CPLD Atina'e Polokalame Pusa, Atina'e Polokalame Pusa, Polokalama Pusa |
