I-Atmel ATF15xx-DK3 CPLD yoPhuhliso/iKhithi yeNkqubo
Intshayelelo
I-Atmel® ATF15xx-DK3 Complex Programmable Logic Device (CPLD) Development/Programmer Kit yinkqubo yophuhliso epheleleyo kunye ne-In-System Programming Programming (ISP) ye-Atmel ATF15xx Family ye-industry standard pin ehambelana ne-CPLDs kunye ne-Logic Doubling® features. Le khithi ibonelela abayili ngendlela ekhawulezayo nelula yokuphuhlisa iiprototypes kunye nokuvavanya uyilo olutsha nge-ATF15xx ISP CPLD. I-ATF15xx Family ye-ISP CPLDs iquka i-Atmel ATF15xxAS, i-ATF15xxASL, i-ATF15xxASV, kunye ne-ATF15xxASVL CPLDs. Ngokufumaneka kweebhodi zeadaptha zesokethi ezahlukeneyo ukuxhasa uninzi lweentlobo zephakheji (1) ezibonelelwa kwi-ATF15xx Family ye-ISP CPLDs, le khithi ingasetyenziswa njengenkqubo ye-ISP yokucwangcisa i-ATF15xx ISP CPLDs kuninzi lweentlobo ezikhoyo zephakheji. (1) ngokomgangatho woshishino JTAG ujongano (IEEE 1149.1).
Imixholo yeKit
- I-Atmel CPLD iBhodi yoPhuhliso/yeNkqubo (P/N: ATF15xx-DK3)
- I-Atmel 44-pin ye-TQFP ye-Socket Adapter Board (P/N: ATF15xx-DK3-SAA44)(2)
- I-Atmel ATF15xx LPT esekwe kwi-JTAG Intambo yokukhuphela ye-ISP (P/N: ATDH1150VPC)
- Ezimbini ze-Atmel 44-pin TQFP Sample Izixhobo
Inkxaso yesixhobo
I-ATF15xx-DK3 CPLD Development/Programmer Kit ixhasa ezi zixhobo zilandelayo kuwo onke akhoyo akhoyo amanqanaba esantya se-Atmel kunye neepakethe (ngaphandle kwe-100-PQFP):
- ATF1502AS/ASL
- ATF1504AS/ASL
- ATF1508ASV/ASVL
- ATF1502ASV
- ATF1504ASV/ASVL
- ATF1508AS/ASL
- Ibhodi ye-adapter yesokhethi ayinikezelwanga kwi-100-pin PQFP.
- Kuphela i-44-pin ye-TQFP Socket Adapter Board ifakiwe kule kit. Ezinye iibhodi zeadaptha zesokethi zithengiswa ngokwahlukeneyo. Jonga iCandelo, "Ingcaciso ye-Hardware" ngolwazi oluthe kratya kwiikhowudi ze-odolo ze-adapter yesokethi.i
Iimpawu zeKit
IBhodi yoPhuhliso/yeNkqubo yeCPLD
- I-10-pin JTAG-ISP Port
- IiSekethe zoBonelelo lwaMandla oMbane we-9VDC uMthombo woMbane
- I-5V ekhethiweyo, i-3.3V, i-2.5V, okanye i-1.8VI/O Voltage Ukubonelela
- I-1.8V ekhethiweyo, i-3.3V, okanye i-5.0V Core Voltage Ukubonelela
- Ibhodi ye-Adapter ye-Socket ye-44 ye-TQFP
- Izihloko ze-I/O Izikhonkwane ze-ATF15xx Isixhobo
- 2MHz Crystal Oscillator
- Iziboniso ezine ze-LED ezinecandelo lesi-7
- Ii-LED ezisibhozo zomntu ngamnye
- IiSwitshi zokucofa-iqhosha ezisibhozo
- I-Global Clear and Output Vulela i-Push-button Switches
- IiJumpers zoMlinganiso zangoku
UkuPhindwa kabini kwee-CPLDs
I-ATF15xx ISP CPLD eneLogic Doubling Architecture
- ATF15xx ISP yokukhuphela iCable
- 5V, 3.3V, 2.5V, okanye 1.8V ISP Khuphela iCable yePC Parallel Printer (LPT) Port
- Isoftware yoPhuhliso lwe-PLD
- Izixhobo zesoftware yophuhliso ye-Atmel PLD ziyafumaneka kwi-intanethi ukuze iPLD isetyenziswe ngabayili be-ATF15xx ISP CPLDs. Nceda ubhekisele kwi-Overview uxwebhu, “PLD
- Uyilo lweSoftware ngaphezuluview” iyafumaneka:
- http://www.atmel.com/images/atmel-3629-pld-design-software-overview.pdf
IiMfuno zeNkqubo
- Ubuncinane behardware kunye nesoftware efunekayo ukwenza inkqubo yesixhobo se-ATF15xx ISP CPLD eyilwe kusetyenziswa i-Atmel ProChip Designer Software kwiBhodi yoPhuhliso/yeNkqubo ye-CPLD nge-Atmel ATMISP v6.x (ATF15xx CPLD ISP Software) zezi:
- x86 Microprocessor-based Computer
- Windows XP®, Windows® 98, Windows NT® 4.0, okanye Windows 2000
- 128-MByte RAM
- 500-MByte Free Hard Disk Space
- IMouse exhaswa yiWindows
- Isishicileli esiFanayo esifumanekayo (LPT)
- 9VDC Power Supply with 500mA of Supply Current
- SVGA Monitor (800 x 600 Resolution)
Ukuodola Ulwazi
| Inombolo yeCandelo le-Atmel | Inkcazo |
| ATF15xx-DK3 | Ikhithi yoPhuhliso/yeNkqubo ye-CPLD (ibandakanya i-ATF15xxDK3-SAA44*) |
| ATF15xxDK3-SAA100 | Ibhodi ye-Adapter ye-Socket ye-100 ye-TQFP yeBhodi ye-DK3 |
| ATF15xxDK3-SAJ44 | Ibhodi ye-Adapter ye-Socket ye-PLCC ye-44 yeBhodi ye-DK3 |
| ATF15xxDK3-SAJ84 | Ibhodi ye-Adapter ye-Socket ye-PLCC ye-84 yeBhodi ye-DK3 |
| ATF15xxDK3-SAA44* | Ibhodi ye-Adapter ye-Socket ye-44 ye-TQFP yeBhodi ye-DK3 |
Hardware Inkcazelo
IBhodi yoPhuhliso/yeNkqubo yeCPLD
- Uphuhliso lwe-CPLD/uMcwangcisi kunye neeBhodi ze-Adapter ye-Socket eziboniswe kulo mfanekiso ungezantsi ziqulathe iimpawu eziluncedo ekuphuhliseni, kwiprototyping, okanye ekuvavanyeni.
- Uyilo lwe-ATF15xx CPLD. Iimpawu ezenza oku kube yinto eguquguqukayo yokuqalisa/ikhithi yophuhliso kunye nenkqubo ye-ISP ye-ATF15xx yosapho lukaJ.TAG-ISP CPLDs ziquka:
- Cofa-iqhosha Iiswitshi
- ii-LEDs
- 7-icandelo lokubonisa
- 2MHz Crystal Oscillator
- 5V, 3.3V, 2.5V, okanye 1.8V VCCIO Selector
- 1.8V, 3.3V, okanye 5.0V VCCINT Isikhethi
- JTAG Izibuko le-ISP
- Iiadaptha zesokhethi
- Isiboniso secandelo lesi-7 elineeJumpers eziKhethekileyo
- IBhodi yoPhuhliso / iProgram ye-CPLD iqulethe iziboniso ezine ze-7-segment ezivumela ukubonwa kweziphumo ze-ATF15xx CPLD. Ezi ziboniso zine zibhalwe njenge DSP1, DSP2, DSP3, kunye neDSP4. Iziboniso ze-7 zecandelo zinee-LED ze-anode eziqhelekileyo kunye nemigca ye-anode eqhelekileyo exhunywe kwi-VCCIO (I / O yokubonelela ngevolthitage ye-CPLD) ngoluhlu lwabaxhathisi abanezijumpi ezikhethiweyo ezibhalwe njenge-JPDSP1, JPDSP2, JPDSP3, kunye ne-JPDSP4. Ezi jumpers zinokususwa ukuya
khubaza imiboniso ngokungadibanisi i-VCCIO kwimiboniso. Imigca ye-cathode yomntu ngamnye idityaniswe kwi-I/O izikhonkwane ze-ATF15xx CPLD kwi-CPLD - Ikhithi yoPhuhliso/yeNkqubo. Ukuvula icandelo elithile, kubandakanywa ne-DOT yesiboniso, i-ATF15xx ye-I / O ye-pin ehambelanayo edibeneyo kweli candelo le-LED kufuneka ibe kwi-logic ephantsi kunye ne-jumper ekhethiweyo ehambelanayo; Ngoko ke, iziphumo zesixhobo se-ATF15xx ziyakufuna uqwalaselo lweziphumo ezisebenzayo-phantsi kuyilo. file. Iziboniso zisebenza kakuhle kwi-2.5V VCCIO okanye ngaphezulu.
- Icandelo ngalinye lomboniso ngamnye linocingo oluqinileyo kwiphini elilodwa le-I/O lesixhobo se-ATF15xx. Kwizixhobo eziphezulu zokubala iphini (i-100-pin kunye nenkulu), onke amacandelo asixhenxe kunye namacandelo e-DOT emiboniso emine axhunyiwe kwi-I / O izikhonkwane; nangona kunjalo, kwizixhobo zokubala ezisezantsi ze-pin, kuphela iseti esezantsi yemiboniso, imiboniso yokuqala neyesine, edityaniswe kwisixhobo se-ATF15xx se-I/O izikhonkwane. Iitheyibhile 1 kunye ne-2 zibonisa udibaniso lwepakethe yecandelo lesi-7 kwisixhobo se-ATF15xx. Isicwangciso sesiphaluka semiboniso kunye ne-jumpers iboniswe kumzobo ongezantsi.
Umzobo 2. Umzobo weSekethe ye-7-icandelo lokuBonisa kunye neeJumpers
Itheyibhile 1.ATF15xx 44-pin Connections ukuya 7-segment Iziboniso
| I-44-pin TQFP | |||
| DSP/Segment | I-PLD iphini | DSP/Segment | I-PLD iphini |
| 1/A | 27 | 3/A | NC |
| 1/B | 33 | 3/B | NC |
| 1/C | 30 | 3/C | NC |
| 1/D | 21 | 3/D | NC |
| 1/E | 18 | 3/E | NC |
| 1/F | 23 | 3/F | NC |
| 1 G | 20 | 3 G | NC |
| 1/DOT | 31 | 3/DOT | NC |
| 2/A | NC | 4/A | 3 |
| 2/B | NC | 4/B | 10 |
| 2/C | NC | 4/C | 6 |
| 2/D | NC | 4/D | 43 |
| 2/E | NC | 4/E | 35 |
| 2/F | NC | 4/F | 42 |
| 2 G | NC | 4 G | 34 |
| 2/DOT | NC | 4/DOT | 11 |
| I-44-pin ye-PLCC | |||
| DSP/Segment | I-PLD iphini | DSP/Segment | I-PLD iphini |
| 1/A | 33 | 3/A | NC |
| 1/B | 39 | 3/B | NC |
| 1/C | 36 | 3/C | NC |
| 1/D | 27 | 3/D | NC |
| 1/E | 24 | 3/E | NC |
| 1/F | 29 | 3/F | NC |
| 1 G | 26 | 3 G | NC |
| 1/DOT | 37 | 3/DOT | NC |
| 2/A | NC | 4/A | 9 |
| 2/B | NC | 4/B | 16 |
| 2/C | NC | 4/C | 12 |
| 2/D | NC | 4/D | 5 |
| 2/E | NC | 4/E | 41 |
| 2/F | NC | 4/F | 4 |
| 2 G | NC | 4 G | 40 |
| 2/DOT | NC | 4/DOT | 17 |
Itheyibhile 2.ATF15xx 84-pin kunye nezikhonkwane eziyi-100 zokuQhagamshela kwiziboniso ezinecandelo eli-7
| I-84-pin ye-PLCC | |||
| DSP/Segment | I-PLD iphini | DSP/Segment | I-PLD iphini |
| 1/A | 68 | 3/A | 22 |
| 1/B | 74 | 3/B | 28 |
| 1/C | 70 | 3/C | 25 |
| 1/D | 63 | 3/D | 21 |
| 1/E | 58 | 3/E | 16 |
| 1/F | 65 | 3/F | 17 |
| 1 G | 61 | 3 G | 12 |
| 1/DOT | 73 | 3/DOT | 29 |
| 2/A | 52 | 4/A | 5 |
| 2/B | 57 | 4/B | 10 |
| 2/C | 55 | 4/C | 8 |
| 2/D | 48 | 4/D | 79 |
| 2/E | 41 | 4/E | 76 |
| 2/F | 50 | 4/F | 77 |
| 2 G | 45 | 4 G | 75 |
| 2/DOT | 50 | 4/DOT | 11 |
| I-100-pin TQFP | |||
| DSP/Segment | I-PLD iphini | DSP/Segment | I-PLD iphini |
| 1/A | 67 | 3/A | 13 |
| 1/B | 71 | 3/B | 19 |
| 1/C | 69 | 3/C | 16 |
| 1/D | 61 | 3/D | 8 |
| 1/E | 57 | 3/E | 83 |
| 1/F | 64 | 3/F | 6 |
| 1 G | 60 | 3 G | 92 |
| 1/DOT | 75 | 3/DOT | 20 |
| 2/A | 52 | 4/A | 100 |
| 2/B | 54 | 4/B | 94 |
| 2/C | 47 | 4/C | 97 |
| 2/D | 41 | 4/D | 81 |
| 2/E | 46 | 4/E | 76 |
| 2/F | 40 | 4/F | 80 |
| 2 G | 45 | 4 G | 79 |
| 2/DOT | 56 | 4/DOT | 93 |
Ii-LED ezineeJumpers eziKhethekileyo
IBhodi yoPhuhliso / iProgram ye-CPLD inee-LED ezisibhozo, ezivumela abaqulunqi ukuba babonise iimpawu zokuphuma kumsebenzisi we-I / Os wezixhobo ze-ATF15xx. Ezi LED zisibhozo zibhalwe LED1 ukuya LED8 kwi CPLD Development/Programmer Board. I-cathode ye-LED nganye ixhunyiwe kwi-Ground (GND) ngokusebenzisa i-resistor series, ngelixa i-anode ye-LED nganye idibaniswe nomsebenzisi we-I / O pin ye-CPLD ngokusebenzisa i-JPL1/2/3/4/5/6/7 /8 ijumpi ekhethiweyo. Ezi jumpers zinokususwa ukukhubaza ii-LED ngokukhupha i-anodes ye-LED kwii-I / O izikhonkwane ze-CPLD. Umzobo ongezantsi ubonisa umzobo wesiphaluka wee-LED kunye neejumpi zokukhetha.
Ukuvula i-LED ethile, i-pin ye-ATF15xx ye-I / O ehambelana ne-LED kufuneka ibe kwi-logic ephezulu kunye ne-jumper ehambelana nayo; Ngoko ke, iziphumo zesixhobo se-ATF15xx ziya kufuneka ziqwalaselwe njengeziphumo eziphezulu ezisebenzayo. Ii-LEDs zisebenza kakuhle kwi-2.5V VCCIO okanye ngaphezulu.
Izixhobo ezisezantsi zokubala zepin (44-pin) zine-I/Os ezine kuphela eziqhagamshelwe kwi-LED1/2/3/4. Kwizixhobo zokubala i-pin-count ephezulu (i-100-pin nangaphezulu), zonke ii-LED ezisibhozo zixhunyiwe kwi-I / Os yesixhobo. Itheyibhile 3 ibonisa ukudibaniswa kwephakheji eyahlukileyo ye-CPLD I / Os kwii-LEDs.
Itheyibhile 3.ATF15xx Ukudibanisa kwii-LEDs
| I-44-pin TQFP | |
| I-LED | I-PLD iphini |
| I-LED1 | 28 |
| I-LED2 | 25 |
| I-LED3 | 22 |
| I-LED4 | 19 |
| I-44-pin ye-PLCC | |
| I-LED | I-PLD iphini |
| I-LED1 | 34 |
| I-LED2 | 31 |
| I-LED3 | 28 |
| I-LED4 | 25 |
| I-84-pin ye-PLCC | |
| I-LED | I-PLD iphini |
| I-LED1 | 69 |
| I-LED2 | 67 |
| I-LED3 | 64 |
| I-LED4 | 60 |
| I-LED5 | 27 |
| I-LED6 | 24 |
| I-LED7 | 18 |
| I-LED8 | 15 |
| I-100-pin TQFP | |
| I-LED | I-PLD iphini |
| I-LED1 | 68 |
| I-LED2 | 65 |
| I-LED3 | 63 |
| I-LED4 | 58 |
| I-LED5 | 17 |
| I-LED6 | 14 |
| I-LED7 | 10 |
| I-LED8 | 9 |
Iqhosha lokucofa litshintsha ngeziThili eziKhethekileyo zeI/O Izikhonkwane
- Ibhodi ye-CPLD yoPhuhliso / iProgram iqulethe iinguqu ezisibhozo ze-push-button, ezidibaniswe nezikhonkwane ze-I / O ze-CPLD. Iiswitshi zithumela imiqondiso yengqiqo yegalelo kumsebenzisi wezikhonkwane ze-I/O zesixhobo se-ATF15xx. Olu tshintsho lubhalwe SW1 ukuya kwi-SW8 kuPhuhliso lwe-CPLD / uMdwelisi
Ibhodi. Esinye isiphelo segalelo ngalinye lokutyhala-iqhosha liqhagamshelwe kwiVCCIO, ngelixa elinye isiphelo sokutshintsha kweqhosha-liqhagamshelwe kwisixhasi sokutsalela phantsi kwaye emva koko siqhagamshelwe kwisikhonkwane se-I/O seCPLD ngeJPS1/2. /3/4/5/6/7/8 ijumpi ekhethiweyo. - Ukuba nayiphi na enye yezi zitshintshi icinezelwe kwaye i-jumper ehambelanayo isetyenzisiwe, i-pin ye-I / O yesixhobo iya kuqhutyelwa kwi-logic ephezulu kwi-output yesiphaluka sokutshintsha. Ekubeni iqhosha ngalinye lokutyhala likwadityanisiwe kwi-resistor yokutsalwa-phantsi, igalelo liya kuba nengqiqo ephantsi ukuba iswitshi ayicinezelwa kunye neseti ye-jumper ehambelanayo. Ukuba i-jumper ye-push-button ayimiselwanga, i-pin ehambelanayo iya kuphathwa njengepini engaxhunywanga. Umzobo we-4 ngumzobo wesiphaluka we-push-button switch kunye ne-jumper ekhethiweyo. Itheyibhile ye-4 ibonisa ukudityaniswa kwezi zibhozo-iqhosha lokutshintshela kwi-CPLD I / O izikhonkwane kwiindidi zephakheji ezahlukeneyo.
Itheyibhile 4.ATF15xx Uqhagamshelwano kwi-I/O Pin Switshi
| I-44-pin TQFP | |
| Cofa iqhosha | I-PLD iphini |
| SW1 | 15 |
| SW2 | 14 |
| SW3 | 13 |
| SW4 | 12 |
| SW5 | 8 |
| SW6 | 5 |
| SW7 | 2 |
| SW8 | 44 |
| I-44-pin ye-PLCC | |
| Cofa iqhosha | I-PLD iphini |
| SW1 | 21 |
| SW2 | 20 |
| SW3 | 19 |
| SW4 | 18 |
| SW5 | 14 |
| SW6 | 11 |
| SW7 | 8 |
| SW8 | 6 |
| I-84-pin ye-PLCC | |
| Cofa iqhosha | I-PLD iphini |
| SW1 | 54 |
| SW2 | 51 |
| SW3 | 49 |
| SW4 | 44 |
| SW5 | 9 |
| SW6 | 6 |
| SW7 | 4 |
| SW8 | 80 |
| I-100-pin TQFP | |
| Cofa iqhosha | I-PLD iphini |
| SW1 | 48 |
| SW2 | 36 |
| SW3 | 44 |
| SW4 | 37 |
| SW5 | 96 |
| SW6 | 98 |
| SW7 | 84 |
| SW8 | 99 |
Iqhosha lokucofa IiTwitshi ezineeJumpers eziKhethekileyo ze-GCLR kunye neePini ze-OE1
Ibhodi yoPhuhliso lwe-CPLD / iBhodi yeProgram iqulethe izitshixo ezimbini ze-push-button ze-Global Clear (GCLR) kunye ne-Output Enable (OE1) yezikhonkwane ze-CPLD. Iiswitshi zilawula iimeko ezinengqondo ze-OE1 kunye ne-GCLR yamagalelo ezixhobo ze-ATF15xx. Ezi zitshintshi zibhalwe SW-GCLR kunye ne-SW-GOE1 ebhodini. Esinye isiphelo se-SW-GCLR yokufaka iqhosha lokutshintshela iqhosha liqhagamshelwe kwi-GND. Esinye isiphelo se
iqhosha lokutyhala liqhagamshelwe kwisixhobo sokutsalela phezulu kwi-VCCIO kwaye emva koko liqhagamshelwe kwi-GCLR iphini lokungena elizinikeleyo lesixhobo se-ATF15xx. Kujongwe ukuba isetyenziswe njengomqondiso osebenzayo-ophantsi wokusetha kwakhona iirejista kwisixhobo se-ATF15xx kunye ne-JPGCLR ekhethiweyo ye-jumper set. Ngokufanayo, esinye isiphelo se-SW-GOE1 yokufaka iqhosha-liqhosha liqhagamshelwe kwi-GND. Esinye isiphelo sokutshintsha kweqhosha-push
iqhagamshelwe kwisixhasi sokutsalela phezulu kwiVCCIO kwaye emva koko iqhagamshelwe kwi-OE1 ezinikeleyo iphini yokufaka yesixhobo se-ATF15xx. Yenzelwe ukuba isetyenziswe njengemveliso esebenzayo-ephantsi eyenza umqondiso ukulawula ukwenziwa/ukukhubaza i-tri-state ye-buffers yemveliso kwi-ATF15xx kunye ne-JPGOE ekhethiweyo yokuxhuma isethi. Umzobo we-5 ngumzobo wesiphaluka we-push-button switches kunye ne-jumpers ye-GCLR kunye ne-OE1 izikhonkwane.
Ukuba kukho naluphi na olu tshintsho lwe-push-button lucinezelwe kwaye i-jumper ehambelanayo isetyenzisiwe, i-I / O ethile ye-CPLD iya kuqhutyelwa kwi-logic low state. Ekubeni iqhosha ngalinye lokutyhala likwadityanisiwe kwisixhobo sokutsalela phezulu, igalelo le-CPLD elihambelanayo liya kuba nengqiqo ephezulu ukuba iqhosha lokutyhala alicinezelwa kunye neseti ehambelanayo ekhethiweyo yejumpi. Ukuba i-jumper ekhethiweyo ayibekwanga, i-pin ehambelanayo ezinikeleyo ye-CPLD inokuthathwa njenge-No Connect (NC) ipini. Itheyibhile yesi-5 ibonisa amanani eephini ze-GCLR kunye ne-OE1 ezinikezelweyo zokufakela izikhonkwane zezixhobo ze-ATF15xx kuzo zonke iintlobo zeepakethe ezikhoyo.
Umzobo 5. Umzobo weSekethe ye-Push-iqhosha lokutshintshela kunye neeJumpers ezikhethiweyo ze-GCLR kunye ne-OE1
Itheyibhile 5.Pin Numbers of GCLR and OE1
| I-44-pin TQFP | I-44-pin ye-PLCC | I-84-pin ye-PLCC | I-100-pin TQFP | |
| GCLR | 39 | 1 | 1 | 89 |
| I-OE1 | 38 | 44 | 84 | 88 |
2MHz Oscillator kunye Clock Ukukhetha Jumper
I-Clock Selection Jumper ebhalwe JP-GCLK kwiBhodi yoPhuhliso/yeNkqubo ye-CPLD yi-jumper eneendawo ezimbini evumela abasebenzisi ukuba bakhethe ukuba yeyiphi i-GCLK ezinikeleyo ye-input pin (nokuba yi-GCLK1 okanye i-GCLK2) yesixhobo se-ATF15xx ekufuneka iqhagamshelwe kwimveliso yesixhobo. 2MHz oscillator. Ukongezelela, i-jumper inokususwa ukuvumela umthombo wangaphandle wewashi ukuba uqhagamshelwe kwi-GCLK1 kunye / okanye i-GCLK2 yesixhobo se-ATF15xx. Umzobo we-6 ngumzekeliso womzobo wesiphaluka we-oscillator kunye ne-jumper yokukhetha. Itheyibhile yesi-6 ibonisa amanani eephini ze-GCLK1 kunye ne-GCLK2 ezinikezelweyo zezikhonkwane zokufakwayo zesixhobo se-ATF15xx kuzo zonke iintlobo zeephakheji ezikhoyo ezahlukeneyo.
Ukuba i-GCLK1 jumper isetiwe, i-jumper iya kufumaneka kwicala lebhodi. Ngakolunye uhlangothi, ukuba i-GCLK2 jumper isetiwe, i-jumper iya kufumaneka phakathi kwebhodi.
Itheyibhile 6.Iinombolo zePin zeGCLK1 kunye neGCLK2
| I-44-pin TQFP | I-44-pin ye-PLCC | I-84-pin ye-PLCC | I-100-pin TQFP | |
| GCLK1 | 37 | 43 | 83 | 87 |
| GCLK2 | 40 | 2 | 2 | 90 |
VCCIO kunye VCCINT Voltage Iijumpa zokuKhetha kunye nee-LED
- I-VCCIO kunye ne-VCCINT Voltage Izijumpi zokuKhetha, ezibhalwe uMkhethi weVCCIO kunye noMkhethi weVCCINT ngokulandelelana kwi-ATF15xx-DK3 yoPhuhliso/iKhithi yokuLungiselela, vumela ukhetho lonikezelo lwe-I/O
- Umqulutage inqanaba (VCCIO) kunye nonikezelo olungundoqo voltage level (VCCINT) ezisetyenziselwa i-CPLD ekujoliswe kuyo kwikhithi. Emva kokuba ezi zijumpi zibekwe ngokuchanekileyo, ii-LED (ezibhalwe nge-VCCINT LED kunye ne-VCCIO LED) ziya kuvula; nangona kunjalo, kunikezelo olusezantsi umthamotagamanqanaba e-e (okt 2.5V okanye ngaphantsi), ii-LEDs zinokuba mfiliba kakhulu.
- Kwi-ATF15xxAS/ASL (5.0V) CPLDs, zombini i-VCCIO Selector kunye ne-VCCINT Selector jumpers kufuneka imiselwe kwi-5.0V.
- Kwi-ATF15xxASV/ASVL (3.3V) CPLDs, zombini i-VCCIO Selector kunye ne-VCCINT Selector Jumpers kufuneka zimiselwe ku-3.3V kuphela.
- Amandla e-CPLD Development/Programmer Kit kufuneka acinywe xa utshintsha indawo yeVCCIO okanye iVCCINT Vol.tage UkuKhetha iJumper (Umkhethi weVCCIO okanye uMkhethi weVCCINT).
- ICCIO kunye ne-ICCINT Jumpers
- I-ICCIO kunye ne-ICCINT jumpers ingasuswa kwaye isetyenziswe njengamanqaku okulinganisa i-ICC. Xa i-jumpers isusiwe, iimitha zangoku zinokudibaniswa kwizithuba zokulinganisa ukusetyenziswa kwangoku kwe-CPLD ekujoliswe kuyo. Xa abasebenzisi bengasebenzisi ezi jumpers ukulinganisa okwangoku, ezi jumpers kufuneka zibekwe ukuze ikhithi kunye ne-CPLD isebenze.
- Umqulutage Abalawuli
- Imiqulu emibinitagabalawuli be-e, ababhalwe VR1 kunye ne-VR2, basetyenziselwa ukuvelisa ngokuzimeleyo kunye nokulawula
- I-VCCINT kunye ne-VCCIO voltages ukusuka kunikezelo lwamandla lwe-9VDC. Ukufumana iinkcukacha, nceda ubone i-ATF15xx-DK3 kit schematic, Figure 12.
- Ukutshintshwa koMbane woMbane kunye ne-LED yaMandla
- I-Power Supply Switch, ebhalwe POWER SWITCH, inokutshintshelwa kwindawo yokuvula okanye yokuvala, esetyenziselwa ukuvula okanye ukucima amandla ebhodi ye-ATF15xx-DK3 ngokulandelanayo. Ivumela i-9VDC voltage kwi-Power Supply Jack ukuba adlule kwi-voltage nabalawuli xa ikwindawo emileyo. Xa i-Power Supply Switch ivuliwe, i-Power LED (ebhalwe POWER LED) iya kukhanya ukubonisa ukuba i-ATF15xx-DK3 Kit inikwe amandla.
- IJack yoBonelelo lwaMandla kunye neNtloko yoBonelelo lwaMandla
- Ibhodi ye-ATF15xx-DK3 iqulethe iindidi ezimbini ezahlukeneyo zokudibanisa umbane ezibhalwe ngu-JPower kunye neJP Power. Nokuba enye yezi ziqhagamshelo zobonelelo lwamandla ingasetyenziselwa ukudibanisa umthombo wamandla we-9VDC kwikhithi. Isidibanisi samandla sokuqala esibhalwe JPower, yijekhi yamandla yomphanda enesithuba se-2.1mm ububanzi, kwaye idibana ne-2.1mm (i-diameter yangaphakathi) x 5.5mm (i-diameter yangaphandle) iplagi yabasetyhini. Intloko yesibini yonikezelo lwamandla ebhalwe JP Power, yi-4-pin eyindoda 0.100 ″ intloko ene-0.025″ yezithuba zesikwere. Ukufumaneka kwezi ntlobo zimbini zeziqhagamshelo zamandla kuvumela abasebenzisi ukuba bakhethe uhlobo lwezixhobo zokubonelela ngombane eziza kusetyenziswa kwi-ATF15xx-DK3 Development/Programmer Kit.
- Inye kuphela kwezi zidibanisi zimbini zonikezelo lwamandla ekufuneka zinikwe amandla ngomthombo we-9VDC kodwa hayi zombini ngaxeshanye.
- JTAG Isidibanisi se-ISP kunye ne-TDO Selection Jumper
- Inkqubo kaJTAG I-ISP Connector ebhalwe ngu-JTAG-IN, isetyenziselwa ukudibanisa i-ATF15xx JTAG izikhonkwane zezibuko (TCK, TDI, TMS, kunye ne TDO) nge ISP yokukhuphela intambo ukuya kumshicileli ofanayo (LPT) izibuko lePC ye J.TAG Inkqubo ye-ISP yesixhobo se-ATF15xx. Izixhumi ze-polarized zisetyenziswa kwi-ATF15xx-DK3 kunye ne-ISP yokukhuphela iCable ukunciphisa iingxaki zokudibanisa. I-PIN1 ileyibhile emazantsi e-JTAG Isidibanisi se-ISP sibonisa indawo ye-pin ye-1 ye-header ye-10 kwaye inciphisa ngakumbi ithuba lokudibanisa i-ISP Download Cable ngokungalunganga.
- Ngasekhohlo kweJTAG-KOKUnxibelelanisa, kukho iikholamu ezimbini ze-vias, kwaye zibhalwe JTAG-OUT. Zenzelwe ukuvumela abasebenzisi ukuba benze iJTAG daisy chain ukwenza JTAG imisebenzi kwizixhobo ezininzi. Abasebenzisi kuya kufuneka bathengise uhlobo olufanayo lwesinxibelelanisi njengaleyo isetyenziselwa uJTAG-Ngena kwiJTAG-OUT indawo ukuze usebenzise olu phawu lukhoyo.
- Ukwenza iJTAG Ikhonkco le-daisy usebenzisa iibhodi ezininzi ze-ATF15xx-DK3, i-TDO Selection Jumper, ebhalwe JP-TDO, kufuneka imiselwe kwindawo efanelekileyo. Kuzo zonke izixhobo ezikwitsheyini yedaisy ngaphandle kwesixhobo sokugqibela, esi sixhobo sokutsiba kufuneka simiselwe kwindawo OKULANDELAYO DEVICE. Kwisixhobo sokugqibela kwitsheyini, le jumper kufuneka isetelwe kwindawo TO ISP CABLE. Xa le jumper ikwindawo OKULANDELAYO ISIXHOBO, iTDO yaloo JTAG isixhobo siya kudityaniswa kwi TDI elandelayo
- JTAG isixhobo kwikhonkco. Xa le jumper ikwi TO ISP CABLE indawo, i TDO yeso sixhobo iya kudityaniswa ne TDO ye J.TAG Isidibanisi se-10-pin, esiza kuvumela uphawu lwe-TDO lweso sixhobo kwikhonkco ukuba lugqithiselwe emva kwi-PC yomkhosi nge-software ye-ISP. Lo mzobo ungezantsi ngumzobo wesekethe we
- JTAG izihlanganisi kunye JP-TDO jumper. Le theyibhile ingezantsi idwelisa amanani ephini koo-J abaneTAG izikhonkwane zesixhobo se-ATF15xx kuzo zonke iipakethe ezikhoyo.
Kuseto lwesixhobo esinye, indawo ye-JP-TDO jumper kufuneka imiselwe TO ISP CABLE.
Umfanekiso 7. ISazobe seSekethe sikaJTAG Izihlanganisi ze-ISP kunye ne-TDO Jumper
- Itheyibhile 7. Amanani ePin ka-JTAG Iimpawu zePort
| I-44-pin TQFP | I-44-pin ye-PLCC | I-84-pin ye-PLCC | I-100-pin TQFP | |
| TDI | 1 | 7 | 14 | 4 |
| TDO | 32 | 38 | 71 | 73 |
| TMS | 7 | 13 | 23 | 15 |
| TCK | 26 | 32 | 62 | 62 |
I-algorithm ye-ISP ilawulwa yi-software ye-ATMISP, esebenza kwi-PC. Abane uJTAG Iimpawu zenziwa lizibuko le-LPT, kwaye zikhuselwe yintambo yokukhuphela ye-ISP phambi kokungena kwisixhobo se-ATF15xx kwibhodi yoPhuhliso/yeProgram yeCPLD. I-10-pin uJTAG I-Port Header pinout kwi-CPLD yoPhuhliso / ibhodi yeProgram iboniswe kuMfanekiso 8, kunye nemilinganiselo yale 10-pin indoda J.TAG Iheader iboniswe kuMfanekiso 9.
Umfanekiso 8. 10-pin JTAG Port Header Pinout
- I-10-pin JTAG I-Port Header pinout iyahambelana ne-ATDH1150PC/VPC LPT intambo esekwe kwizibuko kunye ne-ATDH1150USB esekwe kwi-USB port, kunye ne-Altera.
- I-ByteBlaster/MV/II LPT iintambo ezisekwe kwizibuko. Ukongeza, isoftware ye-ATMISP v6.7 ivumela ukusetyenziswa nokuba yi-Atmel
- ATDH1150PC/VPC/USB cable okanye intambo ye-ByteBlaster/MV/II ukuphumeza i-ISP.
- I-ATMISP v7.0 ixhasa kuphela intambo ye-ATDH1150USB.
- Ibhodi yeAdapter yeSokethi
- Iibhodi ze-ATF15xx-DK3 CPLD zoPhuhliso/iProgrammer Socket Adapter Boards (ATF15xx-DK3-XXXXX) ziibhodi zesekethe ezisebenzisana ne-ATF15xx-DK3 CPLD Development/Programmer Board. Zisetyenziswa ngokubambisana ne-ATF15xx-DK3 CPLD yoPhuhliso / iBhodi yeNkqubo yokuvavanya okanye inkqubo ye-ATF15xx ye-ISP CPLD yezixhobo kwiindidi zeephakheji ezahlukeneyo. Kukho iiBhodi ezine ze-Adapter ye-Socket ekhoyo kwi-ATF15xx-DK3 egubungela i-44-TQFP, 44-PLCC, 84-PLCC, kunye ne-100-
- Iintlobo zephakheji ze-TQFP kwintsapho ye-ATF15xx ye-CPLDs.
- Ibhodi yeadaptha yesokethi nganye inesokethi yesixhobo se-ATF15xx kwaye ineentloko zamadoda kwicala elingezantsi, elibhalwe JP1 kunye neJP2. Iiheader kwicala elisezantsi iqabane kunye neeheader zabasetyhini kwibhodi ye-ATF15xx-DK3, ebhalwe JP4 kunye neJP3. Imiboniso emine yecandelo lesi-7, iiswitshi zeqhosha-push,
- JTAG iimpawu ze-port, i-oscillator, i-VCCINT, i-VCCIO, kunye ne-GND kwiBhodi yoPhuhliso lwe-CPLD / iProgram ixhunywe kwisixhobo se-ATF15xx kwiBhodi ye-Socket Adapter ngokusebenzisa ezi zixhobo ezimbini zokudibanisa.
- Ngaphezulu kwe-44-TQFP i-adapter socket, kukho izixhumi ezine ze-10-pin ezinemilinganiselo efanayo ne-J.TAG Isidibanisi se-ISP. Izikhonkwane zezi ziqhagamshelo zine ziqhagamshelwe kwigalelo kunye nezikhonkwane ze-I/O (ngaphandle kwezine ze-JTAG izikhonkwane) zesixhobo seCPLD ekujoliswe kuso. Zingasetyenziselwa ukuxhuma kwi-oscilloscope okanye i-logic analyzer ukubamba imisebenzi yegalelo kunye ne-I / O izikhonkwane ze-CPLD. Kananjalo zingasetyenziselwa ukudibanisa igalelo kunye ne-I / O izikhonkwane ze-CPLD kwezinye iibhodi zangaphandle okanye izixhobo zokuvavanya umgangatho wenkqubo okanye uvavanyo.
- Atmel ATF15xx ISP Download Cable
- I-ATF15xx ISP yokukhuphela iCable (P/N: ATDH1150VPC) idibanisa i-LPT port yePC kwi-10-pin J.TAG header kwi CPLD Development/Programmer Board okanye ibhodi yesekethe ngokwesiko. Oku kubonisiwe kuMfanekiso 10. Le ntambo ye-ISP isebenza njengesithinteli kwi-buffer i-JTAG Iimpawu phakathi kwezibuko ze-LPT zePC kunye ne-ATF15xx kwibhodi yesekethe. I-Power-On LED ngasemva kwe-25-pin yezindlu zesixhumi sendoda ibonisa ukuba intambo ixhunyiwe ngokufanelekileyo.
- Qinisekisa ukuba le LED ivuliwe phambi kokusebenzisa i-Atmel CPLD ISP Software (ATMISP).
- Le ntambo ye-ISP iqulethe i-25-pin (DB25) yokudibanisa indoda, edityaniswe kwi-port ye-LPT ye-PC. Iplagi yamabhinqa ene-10-pin iqhagamshela kwi-10-pin indoda engu-JTAG iheader kwibhodi yesekethe ye ISP. Umgca wombala obomvu kwintambo yeribhoni ibonisa ukuqhelaniswa kwepini ye-1 yeplagi yabasetyhini. Indoda ene-10-pin uJTAG okubhalwe ngasentla kwi-CPLD
- Ibhodi yoPhuhliso/yeNkqubo yahlulahlulwe ukuthintela abasebenzisi ekufakeni iplagi yabasetyhini kwindlela engalunganga.
- Iikhithi zoPhuhliso lwe-CPLD/Programmer ziquka i-ATF15xx ISP yokukhuphela iCable
(ATDH1150VPC); nangona kunjalo, ezinye iintambo ze-ISP ezixhaswayo nazo zingasetyenziswa. I-ATDH1150VPC, ATDH1150USB, ByteBlasterMV, kunye neentambo ze-ByteBlasterII zingasetyenziselwa i-ATF15xx/ASL (5V) kunye ne-ATF15xxASV/ASVL (3.3V) izixhobo, ngelixa i-ATDH1150PC endala kunye neentambo ze-ByteBlaster zingasetyenziselwa i-ATF15x A/TF5V (XNUMXx) kuphela.
- Umfanekiso we-11 ubonisa i-10-pin ye-header ye-pinout yowesifazane kwi-ATF15xx ye-ISP yokukhuphela iCable. Ipinout ye-10 yentloko eyindoda kwibhodi yePC (ukuba isetyenziselwa i-ISP) kufuneka ihambelane nale pinout.
- Phawula: Ibhodi yesekethe kufuneka inikeze i-VCC kunye ne-GND kwi-CPLD ISP Cable ngokusebenzisa i-10-pin header header.
Imizobo yeSchematic
IiReferensi kunye neNkxaso
Ukufumana iireferensi zesoftware yoyilo olongezelelweyo lwePLD kunye nenkxaso, amaxwebhu anjengoncedo files, izifundo, amanqaku esicelo / amafutshane, kunye nezikhokelo zomsebenzisi ziyafumaneka kwi www.atmel.com.
Atmel ProChip uMyili Software
Itheyibhile 8.ProChip Designer References kunye neNkxaso
| Umyili weProChip | Ukusuka kwimenyu yefestile yeProChip... |
| Nceda | Khetha Nceda > Uncedo loMyili weProchip. |
| Izifundo | Khetha Nceda > Izifundo. |
| Iingxaki ezaziwayo kunye nezisombululo | Khetha Nceda > Review I-KPS. |
Atmel WinCUPL Software
Itheyibhile 9. IiReferensi zeWinCUPL kunye neNkxaso
| WinCUPL | Ukusuka kweyona WinCUPL window menu... |
| Nceda | Khetha Nceda > Imixholo. |
| CUPL Programmers Reference Guide | Khetha Nceda > CUPL Programmers Reference. |
| Izifundo | Khetha Nceda > Ulwazi lwe Atmel > Isifundo1.pdf. |
| Iingxaki ezaziwayo kunye nezisombululo | Khetha Nceda > Ulwazi lwe Atmel > CUPL_BUG.pdf. |
Atmel ATMISP Software
Uluhlu 10. IiReferensi ze-ATMISP kunye neNkxaso
| I-ATMISP | Ukusuka kwimenyu yefestile ye-ATMISP ephambili... |
| Nceda Files | Khetha Nceda > Uncedo lwe-ISP. |
| Izifundo | Khetha Nceda > ATMISP Tutorial. |
| Iingxaki ezaziwayo kunye nezisombululo | Usebenzisa isikhangeli seWindows Explorer, fumana ifolda ye-ATMISP kwaye uvule ifolda fundame.txt file ngomhleli wokubhaliweyo we ASCII. |
Atmel POF2JED Conversion Software
Itheyibhile 11. IiReferensi zePOF2JED kunye neNkxaso
| POF2JED | Ukusuka kweyona menu yefestile yePOF2JED... |
| ATF15xx Conversion Application Brief | Khetha Nceda > Iinketho zoguqulo. |
Uxhaso lobuchwepheshe
- Ngenkxaso yobugcisa kuyo nayiphi na imiba enxulumene ne-Atmel PLD, qhagamshelana neqela lezicelo ze-Atmel PLD apha:
- I-imeyile pld@atmel.com
- Umnxeba otshisayo (+1)408-436-4333
- Ifomu yeNkxaso ye-Intanethi http://support.atmel.com/bin/customer.exe
Imbali yohlaziyo
| Uhlaziyo | Umhla | Inkcazo |
| 3605C | 06/2014 | Hlaziya i-schematics, itemplate, iilogo, kunye nephepha le-disclaimer. Yongeza icandelo leMbali yoHlaziyo. |
| 3605B | 05/2008 |
- Atmel Corporation 1600 Technology Drive, San Jose, CA 95110 USA T: (+1)(408) 441.0311 F: (+1)(408) 436.4200 | www.atmel.com
- © 2014 Atmel Corporation. / Umfundisi: Atmel-3605C-CPLD-ATF15xx-DK3-Development-Kit-UserGuide_062014.
- I-Atmel®, ilogo ye-Atmel kunye neendibaniselwano zayo, Ukwenza amathuba angenamkhawulo, kunye nezinye ziimpawu zorhwebo ezibhalisiweyo okanye iimpawu zorhwebo ze-Atmel Corporation e-US kwaye
amanye amazwe. Eminye imiqathango kunye namagama emveliso inokuba ziimpawu zorhwebo zabanye. - INKCAZELO: Ulwazi olukolu xwebhu lunikiwe ngokunxulumene neemveliso ze-Atmel. Akukho layisenisi, ecacileyo okanye echaziweyo, nge-estoppel okanye ngenye indlela, kulo naliphi na ilungelo lepropathi enomgangatho ophezulu wokuqonda linikwe ngolu xwebhu okanye ngokunxulumene nokuthengiswa kweemveliso ze-Atmel.
- NGAPHANDLE NJENGOKUBA KUBEKWE KWIMIGAQO YE-ATMEL NEMIQATHANGO YOKUTHENGISA EKU-ATMEL. WEBISIZA, I-ATMEL AYIQINISEKI NGAYO NAYIPHI NA KWAYE IBANZA NAPHI NA OKUCACILEYO, OKUTHETHWAYO, OKANYE ISIQINISEKISO SOMTHETHO NGOKUPHATHELELE NEEMVELISO ZASO, KODWA AYIMDALWA, ISIQINISEKISO ESIPHAKANYIWEYO SORhwebo, UBULUNGELO, UKUBA NOHLANGANISO. IN
- AKUKHO ISIGANEKO ESIYA KUTHWALA NGOKUTHELEKILEYO I-ATMEL, INGQONDO, ESEMTHETHWENI, ESOHLWAYO, ESIKHETHEKILEYO, OKANYE UMONAKALO OSETHULWEYO (kubandakanywa, NGAPHANDLE KOMDA, UMONAKALO WENTLAHLEKO KUNYE NEENZUZO, UPHAZAMZO LOSHISHINO, OKANYE UKULAHLEKISWA KOLWAZI) OLU XWEBHU, NANGONA I-ATMEL ICEBISIWE NGOKUBA KUNOKUBA NOKUNGENZA OKUNOMONAKALO.
- I-Atmel ayenzi lumelo okanye iziqinisekiso malunga nokuchaneka okanye ukugqibelela kokuqulathwe koku
uxwebhu kwaye unelungelo lokwenza utshintsho kwiinkcazo kunye neenkcazo zemveliso nangaliphi na ixesha ngaphandle kwesaziso. I-Atmel ayenzi nakuphi na ukuzibophelela ekuhlaziyeni ulwazi oluqulethwe apha. Ngaphandle kokuba kubonelelwe ngenye indlela, iimveliso ze-Atmel azifanelekanga, kwaye aziyi kusetyenziswa, kwizicelo zeemoto. Iimveliso ze-Atmel azijoliswanga, zigunyazisiwe, okanye zigunyazisiweyo ukuba zisetyenziswe njengamacandelo kwizicelo ezijoliswe ukuxhasa okanye ukugcina ubomi. - UKHUSELEKO-LUBALULEKILEYO, UMkhosi, KUNYE NEZITHUTHI NGEZICELO ZIZIBONELELO ZAKHO: Iimveliso ze-Atmel azenzelwanga kwaye aziyi kusetyenziswa ngokunxulumene nazo naziphi na izicelo apho ukusilela kwezo mveliso kuya kulindeleka ngokufanelekileyo ukuba kubangele ukwenzakala okubalulekileyo okanye ukufa (“Izicelo eziBalulekileyo zoKhuseleko”) ngaphandle kokubhaliweyo kwegosa lase-Atmel.
- imvume. Izicelo eziBalulekileyo kuKhuseleko zibandakanya, ngaphandle kwesithintelo, izixhobo zokuxhasa ubomi, kunye neenkqubo, izixhobo okanye iinkqubo zokusebenza kwezixhobo zenyukliya kunye neenkqubo zezixhobo.
- Iimveliso ze-Atmel aziyilwanga kwaye azenzelwanga ukuba zisetyenziswe emkhosini okanye kwi-aerospace okanye kwiindawo ezisingqongileyo ngaphandle kokuba zityunjwe ngokukodwa ngu-Atmel njengebakala lomkhosi. Iimveliso ze-Atmel aziyilwanga kwaye azijoliswanga ukuba zisetyenziswe kwizicelo zeemoto ngaphandle kokuba zityunjwe ngokuthe ngqo yi-Atmel njengebakala lemoto.
- Ikhutshelwe kwi: Arrow.com.
Amaxwebhu / Izibonelelo
 |
I-Atmel ATF15xx-DK3 CPLD yoPhuhliso/iKhithi yeNkqubo [pdf] Isikhokelo somsebenzisi IKit yeNkqubo yoPhuhliso ye-ATF15xx-DK3 CPLD, i-ATF15xx-DK3, iKhithi yoPhuhliso lwe-CPLD, iKhithi yoPhuhliso lweNkqubo, iKhithi yeNkqubo |
