IINKQUBO ze-WM WM-E2SL 
Isikhokelo somsebenzisi weModem

 

UQHAGAMSHELO

1. –Iplastiki ebiyelweyo kunye nesigqubuthelo sayo esiphezulu
2. -PCB (engundoqo)
3. -Amanqaku okuqinisa (ukulungiswa kwee-lags)
4. – Isidibanisi se-eriyali ye-FME (50 Ohm) – ngokuzikhethela: Isidibanisi se-eriyali ye-SMA
5. -Isinxibelelanisi se-RJ45 (uqhagamshelo lwedatha kunye nobonelelo lwamandla eDC)
6. -Unxibelelwano lwentambo yonxibelelwano lwedatha
7. Ii-LED zemo: ukusuka ekhohlo ukuya ekunene: i-LED2 (bomvu), i-LED1 (ebhlowu), i-LED3 (eluhlaza)
8. -isibambi seSIM khadi encinci (yitsalele ngasekhohlo kwaye uyivule)
9. -Izikrufu zokuqhobosha zePCB
10. -I-Super-capacitors
11. -Isinxibelelanisi se-eriyali yangaphakathi (U.FL –FME)

UKUNIKEZELWA KWAMANDLA KUNYE NEEMEKO ZOKUSINGQONGILEYO

• Ubonelelo lwamandla: 8-12V DC (10V DC nominal)
• Okwangoku: 200mA, Ukusetyenziswa: 2W @ 10VDC
• Igalelo lamandla: linokunikezelwa ukusuka kumandla eDC ngemitha ngezibuko le-RJ45
• Unxibelelwano olungenacingo: ngokwemodyuli ekhethiweyo (ukhetho lokuodola)
• Amazibuko: RJ45 uxhumano: RS232 (300/1200/2400/4800/9600 baud)
• Ubushushu bokusebenza: ukusuka -30 ° C * ukuya +60 ° C, rel. 0-95% rel. ukufuma (* TLS: ukusuka kwi-25 ° C) / Ubushushu bokugcina: ukusuka -30 ° C ukuya +85 ° C, rel. 0-95% rel. ukufuma
  *Kwimeko yokusebenzisa i-TLS: ukusuka -25°C

IDATHA YOMCHWEPHEKO / UYILO

• Imilinganiselo: 86 x 85 x 30mm, Ubunzima: 106 gr,
• Impahla: Imodem ine-non-conductive, i-IP21 ekhuselweyo yezindlu zeplastiki.
  I-enclosure inokugqithwa ngeendlebe zokulungisa phantsi kwekhava ye-terminal yemitha.

AMANYATHELO OKUFAKA

• Inyathelo #1: Susa isiciko seterminal yemitha ngezikrufu zayo (nge screwdriver).
• Inyathelo #2: Qinisekisa ukuba imodem AYIKHO phantsi kombane, susa uqhagamshelo lwe-RJ45 kwimitha. (Umthombo wamandla uya kususwa.)
• Inyathelo #3: Tyhila iindlebe (3) kwaye uvule isiciko esingaphezulu sesivalo (1) kwisinxibelelanisi se-eriyali. I-PCB iya kukhululeka ukuyichukumisa.
• Inyathelo #4: Tyhala isiciko sesibambi seplastiki seplastiki (8) ukusuka ekunene ukuya kwicala lasekhohlo, kwaye uyivule.
• Inyathelo #5: Faka iSIM khadi esebenzayo kwisibambi (8). Qaphela kwindawo efanelekileyo
  (itshiphu ijonge ezantsi, icala elisikiweyo lekhadi lijonge ngaphandle kwi-eriyali. Tyhila iSIM kwisiporo esikhokelayo, vala isibambi seSIM, uze utyhale umva isibambi seSIM (8) ukusuka ekhohlo ukuya kwicala lasekunene, uze uyivale ngasemva.
• Inyathelo #6: Qinisekisa ukuba intambo emnyama yangaphakathi ye-eriyali iqhagamshelwe kwisidibanisi se-U.FL (11)!
• Inyathelo #7: Khangela ukuba intambo yedatha yangaphakathi (5) iqhagamshelwe kwi-PCB (2), kwi-interface yesinxibelelanisi sedatha (6).
• Inyathelo #8: Nyusa i-eriyali kwisidibanisi se-eriyali ye-FME (5). (Ukuba usebenzisa i-eriyali ye-SMA, ngoko sebenzisa isiguquli se-SMA-FME).
• Inyathelo #9: Qhagamshela imodem kwikhompyuter ngentambo ye-RJ45 kunye ne-RJ45-USB converter, kwaye usete indawo ye-jumper kwimo ye-RS232. (imodem ingaqwalaselwa kuphela kwi
  Imo ye-RS232 ngentambo!)
• Inyathelo #10: Qwalasela imodem ngeWM-E Term® software.
• Inyathelo #11: Emva koqwalaselo susa i-adapter ye-RJ45-USB kwintambo kwaye unikezelo lwamandla lwemodem luya kupheliswa.
• Inyathelo #12: Vala ngasemva isiciko esivalekileyo semodem (1) ngeendlebe zayo eziqinileyo (3) kwindawo ebiyelweyo yemitha. Uya kuva isandi sokucofa xa ivaliwe.
• Inyathelo #13: Beka kwaye ufake imodem kwindawo yokulinganisa yemitha/indawo yokulungisa kwaye uqhoboshele imodem kwindlu yomitha/indawo ebiyelweyo.
• Inyathelo #14: Uqhagamshelo lwemitha yemodem-Landis+Gyr® lunokuqaliswa nge-RS232 port ngoqhagamshelo lwentambo engu-1:1. Ngoko ke sebenzisa intambo ye-beige RJ45 (5) yemodem ukuxhuma kwi-port ye-RJ45 yemitha.
• Inyathelo #15: Imodem iya kunikwa amandla yimitha ngoko nangoko kwaye ukusebenza kwayo kuya kuqaliswa. Umsebenzi wesixhobo unokujongwa ngee-LEDs.

UKUSEBENZA IIMPAWU ZE-LED – KWIXASO LOKUHLAWULA

Ingqalelo! Imodem kufuneka ihlawulwe phambi kokusetyenziswa kokuqala - okanye ukuba ibingasetyenziswanga ixesha elide. Intlawulo ithatha malunga ne- ~ 2 imizuzu ukuba i-supercapacitor iphelile / ikhutshwe.

Ngaphezulu kokungagqibekanga kwefektri, ukusebenza kunye nokulandelelana kweempawu ze-LED kunokutshintshwa yi WM-E Term® isixhobo soqwalaselo, kwi Iisetingi zemitha ngokubanzi Iqela lepharamitha. Esimahla yokukhetha ezinye iinketho ze-LED inokufumaneka kwi-WM-E2SL ® yoFakelo lwe-modem Manual.

Kubalulekile! Qaphela, ukuba ngexesha le-firmware yokufaka ii-LEDs zisebenza njengoko ziqhelekile - akukho mqondiso obalulekileyo we-LED wenkqubela phambili yokuhlaziya i-FW. Emva kofakelo lweFirmware, i-LEDs ye-3 iya kukhanyisa imizuzwana ye-5 kwaye yonke into ayiyi kuba nanto, emva koko imodem iqala kwakhona nge-firmware entsha. Emva koko zonke iimpawu ze-LED ziya kusetyenziswa njengoko kudweliswe apha ngasentla.

UQINISEKISO LWEMODEM

Imodem kufuneka iqwalaselwe yi WM-E Term® isoftware ngokumisela iiparamitha zayo ekufuneka zenziwe phambi kokusebenza okuqhelekileyo kunye nokusetyenziswa:

• Ngethuba lenkqubo yokucwangcisa, i-RJ45 (5) ikhonkco kufuneka ikhutshwe kwisixhumi semitha kwaye kufuneka ixhunywe kwi-PC. Ngexesha loqhagamshelo lwePC idatha yemitha ayinakufunyanwa yimodem.
• Xhuma imodem kwikhompyuter ngentambo ye-RJ45 kunye ne-RJ45-USB converter. Abatsibayo kufuneka babe kwindawo ye-RS232!
  Kubalulekile! Ngethuba lokucwangciswa, ukunikezelwa kwamandla emodem kuqinisekiswa yile bhodi yokuguqula, kwi-USB uxhumano.
  Ezinye iikhompyuter zinobuntununtunu kutshintsho lwangoku lwe-USB. Kule meko kufuneka usebenzise unikezelo lwamandla lwangaphandle kunye noqhagamshelo olukhethekileyo.
• Emva kolungelelwaniso phinda udibanise intambo ye-RJ45 kwimitha!
• Kuqhagamshelo lwentambo yothotho qwalasela useto lwe-COM port yekhompyuter eqhagamshelweyo ngokwemodem yothotho lweepropathi zezibuko kwiWindows kwi Qala imenyu / Iphaneli yokulawula / uMphathi weSixhobo / iiPorts (COM kunye ne-LTP) e Iipropati: Bit/umzuzwana: 9600, Amasuntswana edatha: 8, Ukulingana:
  Akukho, Ukuma: 1, Bandwith ulawulo: Hayi
• Uqwalaselo lungenziwa nge-CSData ifowuni okanye uqhagamshelwano lwe-TCP ukuba i-APN sele iqwalaselwe.

UQINISEKISO LWEMODEM NGEXESHA LE-WM-E®

IMicrosoft .NET framework runtime environment iyafuneka kwikhompyuter yakho. Kuqwalaselo lwemodem kunye novavanyo uya kufuna i-APN/iphakheji yedatha evuliweyo, iSIM khadi esebenzayo. Ulungelelwaniso lunokwenzeka ngaphandle kweSIM khadi, kodwa kule meko imodem isebenza ngokuqalisa ngokutsha ngamaxesha athile, kwaye ezinye iimpawu zemodem aziyi kufumaneka de kufakwe ikhadi leSIM (umz. ukufikelela kude).

Uqhagamshelo kwimodem (nge-RS232 port*)

• Inyathelo #1: Khuphela i https://www.m2mserver.com/m2m-downloads/WM-ETerm_v1_3_63.zip file. Ukuxininisa kwaye qala i wm-term.exe file.
• Inyathelo #2: Tyhila i Ngema iqhosha kwaye ukhethe i I-WM-E2S isixhobo ngayo Khetha iqhosha.
• Inyathelo #3: Ngasekhohlo kwiscreen, kwi Uhlobo loqhagamshelo isithuba, khetha i Uthotho tab, kwaye ugcwalise i Uqhagamshelwano olutsha indawo (uqhagamshelo olutsha profile igama) kwaye utyhale i Yenza iqhosha.
• Inyathelo #4: Khetha efanelekileyo Izibuko leCOM kunye nokuqwalasela i Ukuhanjiswa kwedatha isantya ukuya kwi-9600 baud (kwi-Windows® kufuneka uqwalasele isantya esifanayo). I Ifomathi yedatha ixabiso kufuneka 8,N,1. Emva koko tyhala i Gcina iqhosha ukwenza uqhagamshelo lothungelwano lweprofile.
• Inyathelo #5: Emazantsi kwicala lasekhohlo kwesikrini khetha uqhagamshelwano uhlobo (serial).
• Inyathelo #6: Khetha i Ulwazi lwesixhobo icon kwi menu kwaye khangela i I-RSSI ixabiso, ukuba amandla omqondiso anele kwaye indawo ye-eriyali ilungile okanye hayi. (Isalathisi kufuneka sibe ubuncinane tyheli (umqondiso ophakathi) okanye luhlaza (umgangatho wesignali elungileyo) Ukuba unamaxabiso abuthathaka, tshintsha indawo ye-eriyali ngelixa awuyi kufumana ixabiso elingcono le-dBm. (jonga isimo kwakhona).
• Inyathelo #7: Khetha i Ukufundwa kweparamitha i icon yoqhagamshelwano lwemodem. Imodem iya kudityaniswa kwaye ixabiso layo parameter, izichazi ziya kufundwa ngaphandle.

*Ukuba usebenzisa umnxeba wedatha (CSD) okanye uqhagamshelo lwe-TCP/IP ukude kuqhagamshelo lwemodem – jonga incwadana yokuFakela iiparamitha zoqhagamshelwano!

Uqwalaselo lweParameter

• Inyathelo #1: Khuphela i-WM-E Term sample uqwalaselo file. Khetha i File / Layisha imenyu yokulayisha i file:
  https://m2mserver.com/m2m-downloads/WM-E2SL-STD-DEFAULT-CONFIG.zip
• Inyathelo #2: Kwi Iqela leParameter khetha i APN iqela, emva koko tyhala kwi Hlela amaxabiso iqhosha. Chaza i Iseva ye-APN kwaye kwimeko ye-neccassary i Igama lomsebenzisi le-APN kwaye Igama lokugqithisa le-APN amasimi, kwaye tyhala ukuya kwi OK iqhosha.
• Inyathelo #3: Khetha i M2M parameter iqela, ngoko tyhala kwi Hlela amaxabiso iqhosha. Nika i Inombolo ye-PORT kwi Ufundo lwemitha olungafihliyo (IEC). izibuko indawo – eya kusetyenziselwa ufundo lwemitha ekude. Nika uqwalaselo INOMBOLO YEZIBUKO kwi Uqwalaselo kunye ne-firmware izibuko lokukhuphela.
• Inyathelo #4: Ukuba i-SIM isebenzisa i-PIN ye-SIM, ke kufuneka uyichaze kwi- Inethiwekhi yeselula parameter iqela, kwaye uyinike kwi I-PIN ye-SIM intsimi. Khetha a Iteknoloji yenethiwekhi yeselula (umz Yonke iteknoloji yenethiwekhi ekhoyo – ekucetyiswa ukuba uyikhethe) okanye ukhethe i I-LTE ukuya kwi-2G (ukwenzela "i-fallback").
  Unokukhetha kwakhona umsebenzisi wefowuni kunye nenethiwekhi- njengezenzekelayo okanye ngesandla. Emva koko tyhala ukuya kwi OK iqhosha.
• Inyathelo #5: Uthotho lwezibuko lwe-RS232 kunye noseto oluselubala lunokufumaneka kwi Trans. / NTA Iqela lepharamitha. Useto oluhlala lukhona lulandelayo: kwi Imowudi yezinto ezininzi: imo ecacileyo, Imitha kwizibuko isantya: 9600, Ifomathi yedatha: Fixed 8N1). Emva koko tyhala ukuya kwi OK iqhosha.
• Inyathelo #6: Kwi Ujongano lweemitha zeRS485 Iqela lepharamitha, kufuneka khubaza imo ye-RS485. Emva koko tyhala ukuya kwi OK iqhosha.
• Inyathelo #7: Emva koseto kufuneka ukhethe i Ukubhala iParameter icon ukuthumela useto kwimodem. Uyakwazi ukubona inkqubela phambili yokulayisha kwibar yenkqubela yesimo esisezantsi. Ekupheleni kwenkqubela phambili, imodem iya kuqalwa kwakhona kwaye iya kuqalisa ngezicwangciso ezitsha.
• Inyathelo #8: Ukuba ufuna ukusebenzisa imodem nge-RS485 yokufunda imitha, kufuneka ulungise izitsiba zibe kwimowudi yeRS485!

Olunye ukhetho lokuseta

• Ukuphathwa kwemodem kunokucocwa kwi Umlindi Iqela lepharamitha.
• Iiparamitha eziqwalaselweyo kufuneka zigcinwe kwikhompyuter yakho kwakhona nge File/Gcina imenyu.
• Uphuculo lweFirmware: khetha i Izixhobo menu, kunye ne Ukufakwa kweFirmware enye into (apho unokulayisha khona ulwandiso olufanelekileyo.DWL file). Emva kwenkqubela phambili yokulayisha, imodem iya kuphinda iqalise kwaye isebenze nge i-firmware entsha kunye neseto zangaphambili!

INKXASO

Imveliso inophawu lwe-CE ngokwemigaqo yaseYurophu.
Amaxwebhu emveliso, isoftware inokufumaneka kwimveliso webindawo: https://www.m2mserver.com/en/product/wm-e2sl/

 

Amaxwebhu / Izibonelelo

I-WM SYSTEMS WM-E2SL Modem [pdf] Isikhokelo somsebenzisi IModem yeWM-E2SL, iWM-E2SL, iModem

Iimbekiselo

• Incwadi yokusebenzisa