LIGHTRONICS DB Series Distribution Dimming Bars

Ulwazi lweMveliso

• Imveliso: DB624 6 x 2400W ISABANE I-DIMMING BAR
• Manufact rer: Inkampani yeLightronics Inc
• Inguqulelo: 1.1
• Umhla: 01/06/2022
• Umthamo: Imijelo emi-6 enomthamo weewathi ezingama-2,400 ngetshaneli nganye, inika isimbuku seewathi ezingama-14,400.
• IProtokholi yoLawulo: Iprotocol yokulawula ukukhanya kwe-DMX512

Imiyalelo yokusetyenziswa kwemveliso

1. Indawo kunye nokuqhelaniswa:
   • Iyunithi kufuneka iqhutywe ngokuthe tye kunye nepaneli yomsebenzisi ijonge phambili okanye ngasemva (ingabi phezulu okanye ezantsi).
   • Qinisekisa ukuba imingxuma yokungena komoya ebusweni beyunithi ayithintelwa.
   • Gcina ukucoceka kwee-intshi ezintandathu phakathi kweyunithi kunye nezinye iindawo zokupholisa ngokufanelekileyo.
   • Musa ukuveza i-DB624 kumswakama okanye ubushushu obugqithisileyo. Yenzelwe ukusetyenziswa kwangaphakathi kuphela.
2. Ukunyuswa:
   • I-DB624 yenzelwe ukuba igxunyekwe kwisixhobo se-truss kusetyenziswa umbhobho wokukhanyisa osemgangathweni clamps.
   • Qhoboshela ibholithi yombhobho clamp kwiT slot eguqulweyo ibekwe ecaleni kwezantsi kwe dimmer.
   • Qinisekisa ukucoceka kwee-intshi ezintandathu phakathi kweyunithi kunye neminye imiphezulu.
   • Sebenzisa amatyathanga okhuseleko okanye iintambo kulo naluphi na ufakelo lwe-dimmer engaphezulu.
3. UkuNyusa ukuFakelo lweAdapter:
   • I-DB624 ibonelelwa ngeeadaptha ezintathu zokuxhoma kunye nehardware ehambelana nayo.
   • Faka umbhobho clamp ekupheleni kweadaptha ezikhwelana ngokwayo.
   • Faka i-1/2 bolt kunye newasha eflethi kwelinye icala leadaptha.
   • Slayida iadaptha kwi-DB624 T slot kwaye uqinise i-nut de idilize.
   • Phinda inkqubo yeeadaptha eziseleyo.
   • Xhuma yonke indibano kwibar yetruss usebenzisa umbhobho clamps kwaye uqinise lonke unxibelelwano.
4. IiMfuno zaMandla:
   • I-DB624 nganye ifuna iilayini zombini zeSigaba esinye senkonzo ye-120/240 Volt AC kwi-60 Amps ngomgca ngamnye
   • Kungenjalo, inokunikwa amandla sisiGaba esiThathu senkonzo ye-120/208 Volt AC.

INGCACISO YEYUNITHI

I-DB624 yi-6 ye-channel dimmer enomthamo we-2,400 watts ngetshaneli nganye enika i-14,400 ye-watts iyonke. I-DB624 ilawulwa yi-protocol ye-DMX512 yokulawula ukukhanya. Iitshaneli zomntu ngamnye zinokusetwa ukuba zisebenze kwimowudi “yokukhutshelwa” apho amajelo acinywa kuphela okanye acinywe ngokuxhomekeke kwindawo yomlawuli wefader.

INDAWO NOLWAZISO

IYUNITHI KUFUNEKA ISEBENZE NGOKUTSHO IXESHA IPHEPHA LOKUSEBENZA LIJONGE PHAMBILI OKANYE NGAMVA (HAYI PHEZULU OKANYE PHANTSI). Qinisekisa ukuba imingxuma yokungena komoya ebusweni beyunithi ayithintelwa. Ukucocwa kwe-intshi ezintandathu kufuneka kugcinwe phakathi kweyunithi kunye nezinye iindawo zokuqinisekisa ukupholisa okufanelekileyo. Musa ukubeka i-DB624 apho iya kuvezwa ukufuma okanye ubushushu obugqithisileyo. I-DB624 yenzelwe ukusetyenziswa kwangaphakathi kuphela.

UKUNYUKA

I-DB624 yenzelwe ukuba igxunyekwe kwisixhobo se-truss kusetyenziswa umbhobho wokukhanyisa osemgangathweni clamps. Ibholithi encamathelayo yale clamps iyakungena kwindawo eguqulweyo "T" ebekwe ecaleni kwezantsi kwe dimmer. I-slot iya kufumana i-1/2" yebhonti (3/4" ngapha kweeflethi zentloko yebholiti). Sebenzisa umbhobho clamp ukunyusa i-DB624 ngaphezulu kwe-truss bar.

UKUNYONGA IIADAPTER
I-DB624 ibonelelwa ngeeadaptha ezintathu zokuxhoma kunye nezixhobo ezihambelana nazo. Injongo ephambili yee-adapters kukubonelela ngendlela yokufaka iyunithi ngaphantsi kwe-truss bar ngaphandle kokuyijika. Iiadaptha zingasetyenziselwa amanye amalungiselelo achaziweyo okunyusa.

UKUFAKA IIADAPHATHA ZOKUFAKWA

1. Faka umbhobho clamp ekupheleni kweadaptha ezikhwelana ngokwayo. Yenza i-clamp I-snug kodwa ayiqinile ngokuchasene neadaptha ukuze wenze uhlengahlengiso lokugqibela xa ufaka iyunithi kwibar.
2. Faka i-1/2 ″ yebholiti kunye newasha eflethi kwelinye icala leadaptha ukuze intloko yebhawudi kunye newasha zibe ngaphakathi kweadaptha.
3. Slayida iadaptha (ene-1/2 ″ yebholiti kunye newasha eflethi efakiweyo) kuzo zonke iziphelo ze-DB624 ukuze intloko yebholithi islayide kwi-DB624 “T” slot. Iwasha yesicaba kufuneka ibe phakathi kweDB624 kunye neadaptha.
4. Fakela iwasha yokutshixa kunye ne nut kwi 1/2 ″ bolt. Yiyeke ikhululekile ngokwaneleyo ukutyibilika iadaptha ecaleni kwe "T" slot kwiDB624.
5. Slayida i-adapter ecaleni kwe-DB624 "T" slot ukuya kwindawo oyifunayo kwaye uqinise i-nut ide ihluthe. Usenokungafuni ukuqinisa ngokupheleleyo amantongomane ukuze wenze uhlengahlengiso lokugqibela xa uxhoma iyunithi.
6. Phinda le nkqubo ingentla kwiiadaptha eziseleyo.
7. Xhoma yonke indibano kwibar yetruss ngombhobho clamps. Gxininisa naluphi na udibaniso olushiywe lukhululekile ngexesha lenkqubo yokuhlanganisa yangaphambili.

PHAWULA: Ukusetyenziswa kwamatyathanga okhuseleko okanye iintambo kuyacetyiswa kulo naluphi na ukufakelwa kwe-dimmer engaphezulu

UKUFAKWA KWE-ADAPTER YOKUFAKA

IIMFUNO ZAMANDLA

I-DB624 nganye ifuna imigca yomibini yenkonzo ISIGABA ESISODWA 120/240 VOLT AC ku-60 Amps ngomgca ngamnye okanye ISIGABA ESITHATHU 120/208 VOLT AC inkonzo kwi-40 Amps ngomgca ngamnye. Izikhondaktha ezingathathi hlangothi nasemhlabeni ziyafuneka. Iyunithi idinga i-frequency ye-60HZ kodwa inokusekwa kwi-50HZ njengomyalelo okhethekileyo okanye uhlaziyo ngokuqhagamshelana ne-Lightronics. Amandla angena kwi-DB624 ngokusebenzisa imingxunya enobungakanani obukwicala lasekhohlo leyunithi. Ibhloko ye-terminal yokudibanisa amandla angenayo ibekwe ngaphakathi kwesiphelo sasekhohlo seyunithi. Kukho kwakhona i-lug yomhlaba. I-DB624 ayiyi kusebenza ngokuchanekileyo isebenzisa kuphela izigaba ezi-2 zenkonzo yamandla yesigaba se-3. Oku kuyinyani nokuba iyunithi imiselwe amandla esigaba esinye okanye esithathu.

UKUFAKWA

QINISEKISA AMAGUNYA OKUFAKA IGALELO AKAXHLANGANISIWE PHAMBI KOFAKA I-DB624. I-DB624 ibonelelwa ukuba isebenze kwi-VAC yesiGABA ESITHATHU 120/208 amandla. Inokuthi “iguqulwe indawo” ukuze isebenze KWISIGABA ESISODWA 120/240 VAC. Jonga icandelo "UKUQHAGAMSHELWA KWAMANDLA ESIGABA ESINYE" ngolwazi malunga nokuguqula amandla esigaba esinye. Iitheminali zegalelo lamandla zithelekiswe ngocingo olunye AWG#8 okanye olunye AWG#6 ucingo. I-torque yetheminali yi-16 lb.-in max.
IINKONZO
Ukufikelela kwamandla kwi-DB624 kudlula kwipleyiti yesigqubuthelo sesiphelo sasekhohlo esineenkqonkqo ezimbini. Icwecwe lasekunene elinesigqubuthelo secala likwanalo nokunkqonkqozwa kabini “okuphuma ngenqindi” kwelinye icala. Ezi pleyiti zokugqibela zinokutshintshwa ukuze zilungiselele ufakelo lwakho oluthile.
UKUGUQULELA KUFIKELELO KWAMANDLA NGESANDLA SASEKUNENE
I-DB624 inokuguqulwa intsimi ukuze ibonelele ngokufikelela koqhagamshelo lwamandla kwisiphelo sesandla sasekunene seyunithi ngelixa igcina ulungelelwaniso oluchanekileyo lwephaneli yolawulo yeziko. Oku kwenziwa ngokususa ipaneli yolawulo yeziko kwaye uyibuyisele ijonge phantsi. Xa oku kugqityiwe, igalelo lamandla liya kuba sekupheleni, iphaneli yolawulo iya kuhlala ifundeka "icala lasekunene phezulu" kwaye iziphumo zetshaneli ziya kuhambelana ngokuchanekileyo nelebhile.

Inkqubo imi ngolu hlobo lulandelayo:

1. Susa izikrufu ezisibhozo ezincamathelisa indawo yolawulo kwi-chassis engundoqo kwaye uyikhuphe ngononophelo ipaneli. Qaphela i-orientation ye-6-pin, i-inline connectors edibanisa kwiziko elingasemva lekhadi lesiphaluka solawulo.
2. Khipha uqhagamshelo ezibini ze-6-pin iziqhagamshelo ezisemgceni (cinezela iithebhu zokuvala ukuze uzikhulule). Kwikhadi lesekethe ezi zibhalwe njenge-J1 (phezulu) kunye ne-J2 (ephantsi). Kwakhona qhawula umdibaniso we-2-pin engaphakathi.
3. Jikelezisa indawo yolawulo yombindi ukuze ifundeke ijonge ezantsi kwaye uphinde ufake iziqhagamshelo ezi-6. Musa ukujikelezisa okanye ukuhambisa izihlanganisi zabasetyhini ezineengcingo kuzo. Isidibanisi esasincanyathiselwe kwi-J1 kufuneka ngoku siqhagamshelwe kwi-J2 nangokuphambana kwayo.
4. Phinda uqhagamshele isiqhagamshelo se-2-pin kwaye uphinde ufake ipaneli yolawulo.

IZIGABA EZINTATHU UKUQHAKATHWA KWAMANDLA
Amandla enqanaba lesithathu lokwenyani kufuneka anikezelwe ukuze asebenze i-DB624 kuqwalaselo lwesigaba esithathu. Oku kuthetha ukuba ngalinye igalelo ezintathu amandla imilenze eshushu (L1, L2 kunye L3) kufuneka abe ne-120 degree isigaba sombane offset omnye komnye. Isekethe yesondlo mayibenako ukubonelela ngama-40 Amps ngomlenze ngamnye oshushu. I-DB624 ifektri ithunyelwe ngenqanawa ukuze ibambe ISIGABA ESITHATHU, 120/208 VAC, inkonzo yamandla eWye. Qhagamshelana neekhowudi zombane ezisebenzayo zendawo yakho ukuze ufumane iinkcukacha ezichanekileyo zocingo. Iyunithi kufuneka inikwe amandla kwisekethe enika ubuncinci be-40 Amps ngomgca ngamnye (3 ipali 40 Amp umephuli wojikelezo). Ubuncinane bobungakanani bocingo yi AWG#8. Ucingo lusenokuba ludityanisiwe okanye luqine. Iitheminali zenzelwe iingcingo zobhedu kuphela. QINISEKA UMTHOMBO WAMANDLA WOKUFUMANA UYENZIWA PHAMBI KOKWENZIWA KOQHAGAMSHELWANO.

QHAGAMSHELANA IINGCINGA ZAMANDLA NGOKU KULANDELAYO

1. Susa isiciko sofikelelo ekupheleni kweyunithi.
2. Qhagamshela iingcingo zombane ezintathu "HOT" kwi-L1, L2, L3 terminals.
3. Qhagamshela ucingo oluphakathi kwitheminali ephawulwe ngu-N.
4. Qhagamshela ucingo olusezantsi kwitheminali ye-CHASSIS GROUND ephawulwe ngo-G.

Xa usebenza kumandla wesigaba esithathu, i-DB624 ilindele ulandelelwano lwesigaba esithile kwezi zintathu zoqhagamshelwano lwamandla. Akukhathaliseki nokuba sesiphi isigaba esiqhagamshelwe kwi-terminal ye-L1 kodwa i-L2 kunye ne-L3 kufuneka zilandelelanise kakuhle. Iyunithi ayisayi konakaliswa ukuba ezi zidibanisi zimbini zibuyiselwe umva kodwa ukufiphala akuyi kwenzeka ngokuchanekileyo kwaye ezinye iitshaneli ziya kubonakala zikwimo yokuvula/yokucima. Ukuba oku kuyenzeka - bona icandelo elithi "Phase Sensing Jumper" kule ncwadana kwaye usete ibhloko yokutsiba kwisigaba esithathu sokusebenza umva.

IZIGABA EZINTATHU ZOKUQHAKATHWA KOMGAQO WAMANDLA

ISIGABA ESINYE UKUQHAKATHWA KWAMANDLA
I-DB624 inokuguqulwa indle ukuze ikwazi ukujongana nenkonzo yamandla e-VAC ESISODWA ESINYE 120/240. Qhagamshelana neekhowudi zombane ezisebenzayo zendawo yakho ukuze ufumane iinkcukacha ezichanekileyo zocingo. Iyunithi kufuneka inikwe amandla kwisekethe enika ubuncinci be-60 Amps ngomgca ngamnye (2 ipali 60 Amp umephuli wojikelezo). Ubuncinane bobungakanani bocingo yi-AWG#6. Ucingo lusenokuba ludityanisiwe okanye luqine. Iitheminali zenzelwe iingcingo zobhedu kuphela.

QINISEKA UMTHOMBO WAMANDLA WOKUFUMANA UYENZIWA PHAMBI KOKWENZIWA KOQHAGAMSHELWANO.

1. Susa isiciko sofikelelo ekupheleni kweyunithi.
2. Qhagamshela iingcingo zamandla amabini "HOT" kwi-terminal ye-L1 kunye ne-L3.
   • Phawula: Itheminali ephawulwe nge-L2 ayisetyenziselwa ukusebenza kwesigaba esinye.
3. Qhagamshela ucingo oluphakathi kwitheminali ephawulwe ngu-N.
4. Qhagamshela ucingo olusezantsi kwitheminali ye-CHASSIS GROUND ephawulwe ngo-G. Kukho iingcingo ezimbini ezibhlowu kwi-terminal ye-L2 kwelinye icala le-terminal igalelo lombane. Ezi ngcingo zinekhowudi ezinombala eziphawula iityhubhu ezicuthayo kuzo. Enye yazo iphawulwe ngoMNYAMA. Enye iphawulwe ngeRED.
5. Hambisa ucingo oluBLUE ngesiphawuli EMNYAMA ukusuka kwitheminali ye-L2 ukuya kwi-terminal ye-L1.
6. Hambisa ucingo oluBLUE ngesiphawuli ESIBOMVU ukusuka kwitheminali ye-L2 ukuya kwitheminali ye-L3. Umzobo woqhagamshelo lwamandla esigaba esinye uboniswe ngezantsi:

ISIGABA ESINYE IZIQINISEKISO ZOKUFAKA KWAMANDLA

ISIGABA SOKUVAMELA UMxhume
Kukho ibloko encinci ye-jumper emnyama ebekwe ngasemva kwibhodi yesekethe yolawulo ekufuneka imiselwe ukuhambelana nokuba yinqanaba elinye okanye inqanaba lesithathu le-AC igalelo lamandla. Faka i-jumper ngokwamandla kwiziko lakho usebenzisa lo mzobo ungezantsi. Izikhundla ziboniswe ngezantsi kwaye ziphawulwe kwibhodi yesekethe. Ibhodi yesekethe yolawulo ifakwe ngaphakathi kwipaneli yokulawula ephambili eyona ndawo iphambili yecandelo kwiyunithi. Isetingi yeSigaba esiThathu sokuReverse sinikezelwe kuphela ukulungisa "ngaphandle kolandelelwano" imidibaniso yegalelo lamandla. Kwakhona jonga icandelo “UQhagamshelwano lwaMandla eSigaba esiThathu” ngolwazi oluthe kratya malunga nokusetwa kweSigaba esiThathu sokuBuyiswa. I-DB624 idla ngokuthunyelwa ukusuka kumzi-mveliso ukuya kwiSigaba se-3 sokusebenza okuQhelekileyo.

Nqamula okanye cima amandla kwiyunithi ngaphambi kokuba utshintshe useto lwe-jumper

UKUQHAGAMSHELWA KWEZIPHUMO ZAMASHAYELA (LAMP LAYISHA IZIQHAGAMSHELO)
Iziqhagamshelo zemveliso yetshaneli eDimmer zisebusweni beyunithi. Imidibaniso emibini iyafumaneka kwitshaneli nganye (iiphaneli ozikhethelayo zokutshixa zinonxibelelwano olunye kwitshaneli nganye). Ukufakwa kweenombolo kwiitshaneli kubonisiwe kwiyunithi yeziko lobuso. Ubuninzi bomthwalo wetshaneli nganye yi-2400 Watts okanye i-20 Amps.
UMQONDISO WOLAWULO
Qhagamshela i-Lightronics okanye enye i-DMX512 yesilawuli esihambelanayo kwi-DB624 usebenzisa i-MALE 5-pin XLR isinxibelelanisi esibekwe kumbindi wobuso beyunithi. Esi sidibanisi siphawulwe ngo-DMX IN. I-5-Pin XLR isinxibelelanisi sinikiwe ukuze ukwazi ukuqhagamshela iidimmer ezininzi njengenkqubo. Esi sidibanisi siphawulwe ngokuba yi-DMX OUT kwaye siya kudlula isignali ye-DMX ukuya kwii-dimmers ezongezelelweyo kwikhonkco le-DMX. Ulwazi lweingcingo zokudibanisa lunikwe ngezantsi.

INOMBOLO YE-PIN	IGAMA LOMQONDISO
1	I-DMX eqhelekileyo
2	Idatha yeDMX -
3	Idatha ye-DMX +
4	Ayisetyenziswa
5	Ayisetyenziswa

UKUPHISWA kwe-DMX
Isixokelelwano sesixhobo se-DMX kufuneka sipheliswe ngombane kwisixhobo sokugqibela (kwaye kuphela isixhobo sokugqibela) kwikhonkco lolawulo. I-terminator ye-DMX iqukethe i-120 Ohm resistor edibeneyo kwi-DMX DATA + kunye ne-DMX DATA - imigca. I-DB624 iqulethe i-terminator eyakhelweyo enokuthi itshintshelwe ngaphakathi okanye iphume. Isiphelo sasekhohlo sokutshintsha kwe-DIP kwindawo yolawulo yeyunithi iya kusebenzisa isithinteli ukuba sisiwe kwindawo ye-UP.

UKUSEBENZA

• IZIQINISEKISO ZESEKELA
  Ipleyiti encinci kufutshane nesiphelo seyunithi iqulethe i-20 Amp umahluli wesekethe yemagnethi kwitshaneli nganye ye-dimmer. Ukusebenzisa umjelo i-breaker circuit ehambelana nayo kufuneka ivalwe. Amanani amatshaneli ee-circuit breakers afumaneka kwi-circuit breaker panel. Ukuba i-breaker yesekethe ayiyi kuhlala ivaliwe ngoko kukho ukulayisha ngaphezulu kwi-lamps yelo jelo KUFUNEKA lulungiswe phambi kokuba umsebenzi uqhubeke.
• IZALATHISI
  Kukho i-neon lamp kwitshaneli nganye kumbindi wobuso. Le lamp ibonisa xa amandla e-INPUT efumaneka kwitshaneli (Amandla okufakwayo avuliwe kunye ne-channel circuit breaker ivaliwe). Kukwakho nomqolo wee-LED ezintandathu ezibomvu kumbindi we-faceplate onika isalathiso esiqikelelweyo sobunzulu bechaneli.
• UKUSEKA IYUNITHI YOKUQALA IDILESI
  I-DB624 inokuthi ibhekiswe kuyo nayiphi na ibhloko yeedilesi ezintandathu ze-DMX phakathi kwe-1 kunye ne-507. Misela ukutshintshwa kweminyaka elishumi ejikelezayo kwipaneli yeziko leyunithi kwinani elihambelana nedilesi ye-DMX eya kusetyenziswa kwitshaneli yokuqala ye-DB624. Amajelo amahlanu aseleyo aya kwabelwa kwiidilesi eziphezulu ze-DMX ezilandelelanayo. Ii-DB624 ezininzi zinokusetwa kwibhloko yedilesi enye.
• UVAVANYO lwesiteshi
  Umsebenzi wetshaneli weDB624 unokuvavanywa kwiyunithi. Amaqhosha amathandathu amancinci asezantsi ngasekunene kumbindi weplate aya kusebenzisa isitishi esidimeni esidityanisiweyo ukuba sivule kwaye VAMILE xa sityhalwa. Ukongeza kuvavanyo lwetshaneli, lo msebenzi uluncedo xa uhlengahlengisa okanye ugxininise lamps. Ijelo elivulwe ngamaqhosha ovavanyo linokuvalwa kwikhonsoli ye-DMX ngokuseta i-fader yesitishi esinxulumeneyo ukuba ivule kwaye iphinde iValwe. Iimpawu ezibomvu ze-LED ezibekwe ngokuthe ngqo ngaphezu kwamaqhosha abonisa xa itshaneli ivuliwe.
• UKUSEBENZA KWEMODI YOKUDLALELA
  Iitshaneli ezizimeleyo ze-DB624 zinokutshintshelwa kwimowudi yokudlulisa. Kule mowudi itshaneli ye-dimmer iya kuba ivuliwe ngokupheleleyo okanye icime ngokupheleleyo ngokuxhomekeke kubungakanani bolungiselelo lwetshaneli kwi-console yolawulo. Ijelo liza kuhlala livaliwe de kugqitywe indawo yomda weconsole fader. Xa oku kusenzeka - itshaneli ye-dimmer ehambelanayo iya kutshintshela ngokupheleleyo kwimeko. Le ndlela iluncedo ukulawula lamps kunye nezinye izixhobo zokukhanyisa ezingenakucinywa. Kukho ibhloko yeeswitshi ezisixhenxe zeDIP kwiphaneli esembindini yeyunithi. Isandla sasekunene ezintandathu kwezi zitshintshi zisetyenziselwa ukutshintshela itshaneli ehambelanayo kwimodi yokudlulisa. Ukutshintshela itshaneli kwimowudi yokudlulisela - tyhala i-DIP yayo itshintshe UP.

UKULONDOLOZA NOKULUNGISA UXHOBO

QINISEKISA ONKE AMANDLA ASUSIWE PHAMBI KOKUBAMBA IYUNITHI.

1. Qinisekisa ukuba iidilesi zetshaneli zeyunithi zisetwe ngokuchanekileyo.
2. Khangela ukuba isilawuli se-DMX sinamandla kwaye amajelo e-DMX afakwe amaphecana okanye asetwe ngokufanelekileyo.
3. Jonga intambo yokulawula phakathi kwe-dimmer kunye nomlawuli wayo we-DMX.
4. Qinisekisa imithwalo kunye noqhagamshelo lwabo.

UKULONDOLOZA KOMNINI
Kukho i-fuse enye kwiyunithi ebonelela ngokhuseleko kwibhodi yesekethe eprintiweyo yeyunithi. Inokutshintshwa kuphela nge-1/2 Amp, 250VAC, Fast acting replacement fuse. Awekho amanye amalungu asebenzisekayo asebenzisekayo ngaphakathi kwiyunithi. Eyona ndlela yokwandisa ubomi beyunithi yakho kukuyigcina ipholile, icocekile kwaye yomile. Kubalulekile ukuba indawo yokupholisa kunye nemingxuma yokuphuma icocekile kwaye ayithinteki. Inkonzo eyenziwa ngaphandle kwee-arhente ezigunyazisiweyo zeLightronics inokuphelisa iwaranti yakho.
UKUSEBENZA NOKULONDOLOZA
Ukuba inkonzo iyafuneka, qhagamshelana nomthengisi othenge kuye isixhobo okanye usibuyisele kwiSebe leNkonzo yeLightronics, 509 Central Drive, Virginia Beach, VA 23454. TEL 757 486 3588. Nceda uqhagamshelane neLightronics ukuze ufumane iPhepha loLwazi lokuLungiswa ukuze lizaliswe kunye nezinto ezibuyiswayo ukuze zisetyenziswe. I-Lightronics icebisa ukuba urekhode inombolo ye-serial ye-DB624 yakho kwireferensi yexesha elizayo
INOMBOLO YESIRIYELI __________________________

ULWAZI LWEQINISEKISO NOBHALISO – COFA LINK NGEZANTSI: www.lightronics.com/warranty.html. www.lightronics.com. 509 Central Drive, Virginia Beach, VA 23454 Umnxeba 757 486 3588

Amaxwebhu / Izibonelelo

LIGHTRONICS DB Series Distribution Dimming Bars [pdf] Incwadi yoMnini I-DB624, i-DB Series i-Dimming Bars, ii-Dimming Bars, ii-Dimming Bars, ii-Dimming Bars

Iimbekiselo

• Incwadi yokusebenzisa