ETSA LErata la Maths Complex Function Jenereithara Eurorack Module

Litlhaloso

• Lebitso la Sehlahiswa: LIPALO
• Mofuta: Khomphutha ea Analog bakeng sa Merero ea 'Mino
• Mesebetsi: Moqtage Enfelopo e Laoloang, LFO, Ts'ebetso ea Lipontšo, Moloko oa Lipontšo
• Mefuta e Kenyelitsoeng: +/- 10V

Litaelo tsa Tšebeliso ea Sehlahisoa

Ho kenya

Pele o kenya, sheba lintlha tsa moetsi oa nyeoe ea hau bakeng sa sebaka sa phepelo e mpe. Netefatsa khokahano e nepahetseng ea motlakase.

Fetileview

MATHS e etselitsoe merero ea 'mino' me e fana ka mesebetsi e fapaneng ho kenyelletsa ho hlahisa mesebetsi, ho kopanya lipontšo, ampho phahamisa, ho fokotsa, ho fetola mats'oao, le tse ling.

Panel Controls

1. Keletso ea Letšoao: Sebelisa bakeng sa lienfelopo tsa Lag, Portamento, le ASR. Range +/-10V.
2. Kenyo ea ho Qala: Heke kapa Pulse e etsa hore potoloho e hlahise Enfelopo, Pulse Delay, Clock Division, le LFO Reset.

Tsoha, Ho oa, le Vari-Response

• Litekanyetso tsa Rise, Fall, le Vari-Response li hlalosa litšobotsi tsa Enfelopo e hlahisoang ke Trigger Input.

Dipoelo tsa Letshwao

• Sehlahisoa se fana ka liphetho tse fapaneng tsa matšoao ho kenyelletsa Lienfelopo, Karohano ea Clock, le tse ling. Sheba bukana bakeng sa mehopolo e qaqileng ea patch.

Malebela le Maqheka

• Lekola ho kopanya matšoao a fapaneng a taolo ho theha melumo e rarahaneng. Teko ka modulating voltages le ho hlahisa liketsahalo tsa 'mino tse ipapisitseng le ho utloa motsamao ka har'a sistimi.

Mehopolo ea Patch

• Sheba bukana ea mekhoa ea boiqapelo ea ho kopanya MATHS le limmojule tse ling tsamaisong ea hau bakeng sa ho hlahisa melumo e ikhethang le menyetla ea ho feto-fetoha ha molumo.

KEKETSO

Kotsi ea motlakase!

• Kamehla tima khesi ea Eurorack 'me u lokolle thapo ea motlakase pele u hokela kapa ho ntša thapo ea khokahanyo ea boto ea bese ea Eurorack. Se ke oa ama liteishene tsa motlakase ha u hokela thapo efe kapa efe ea boto ea libese ea Eurorack.
• Make Noise MATHS ke mojule oa 'mino oa elektroniki o hlokang 60mA ea +12VDC le 50mA ea -12VDC e laoloang ke matla.tage le sesebelisoa sa kabo se hlophisitsoeng hantle hore se sebetse. E tlameha ho kenngoa ka nepo ka har'a mofuta oa Eurorack modular synthesizer system case.
• Eya ho http://www.makenoisemusic.com/ bakeng sa mohlalaamptse ling tsa Eurorack Systems le Cases.
• Ho kenya, fumana 20HP ka nyeoeng ea hau ea synthesizer ea Eurorack, netefatsa ho kenngoa hantle ha thapo ea sehokelo sa boto ea libese ea Eurorack karolong e ka morao ea mojule (bona setšoantšo se ka tlase), 'me u hokele thapo ea sehokelo sa boto ea libese ka har'a boto ea libese ea Eurorack, u nahane ka polarity e le hore mola o RED o lebisitsoe ho NEGATIVE 12 Volt line le bese ka bobeli.
• Ho Make Noise 6U kapa 3U Busboard, mohala o mobe oa 12 Volt o bontšoa ke mola o mosoeu.
• Ka kopo, sheba lintlha tsa moetsi oa kesi ea hau bakeng sa sebaka sa phepelo e mpe.

FEELAVIEW

MATHS ke komporo ea analoge e etselitsoeng merero ea 'mino. Har'a tse ling, e u lumella ho:

1. Hlahisa mefuta e fapaneng ea linear, logarithmic, kapa exponential e susumetsang kapa e tsoelang pele.
2. Kopanya lets'oao le kenang.
3. Ampphahamisa, fokotsa, le ho Fetola lets'oao le kenang.
4. Eketsa, tlosa, le OR ho fihla ho matshwao a 4.
5. Hlahisa matšoao a analoge ho tsoa tlhahisoleseling ea dijithale (Heke/Clock).
6. Hlahisa tlhahisoleseding ea dijithale (Heke/Clock) ho tsoa ho matšoao a analoge.
7. Liehisa lintlha tsa digital (Heke/Clock).

Haeba lethathamo le ka holimo le baleha joaloka saense ho e-na le 'mino, phetolelo ke ena:

1. Moqtage Laola Enfelopo kapa LFO e lieha joalo ka metsotso e 25 mme e potlakile joalo ka 1khz.
2. Sebelisa Lag, Slew, kapa Portamento ho laola voltages.
3. Fetola botebo ba ho feto-fetoha ha molumo 'me u fetole morao!
4. Kopanya ho fihlela ho 4 matshwao a taolo ho theha modulation e rarahaneng haholoanyane.
5. Liketsahalo tsa 'Mino tse kang Ramphodimo kapa tlase ho Tempo, ka taelo.
6. Ho qala liketsahalo tsa 'Mino ha u utloa ho sisinyeha ho sistimi.
7. Karohano ea lintlha tsa mmino le/kapa Flam.

MATHS revision 2013 ke setloholo se otlolohileng sa MATHS ea mantlha, e arolelanang potoloho e ts'oanang ea mantlha le ho hlahisa matšoao ohle a taolo ao ea mantlha e neng e khona ho hlahisa, empa ka lintlafatso, litlatsetso le liphetoho.

1. Ponahalo ea li-control e fetotsoe hore e be e hlakileng haholoanyane le hore e sebetse haholoanyane ?ka metsi le CV Bus le li-module tse teng tsamaisong ea rona tse kang DPO, MMG, le ECHOPHON.
2. Letšoao la LED bakeng sa mats'oao le ntlafalitsoe ho bonts'a molumo o motle le o mobetages hammoho le ho eketsa qeto ea pontšo. Leha e nyane voltagli ka baloa li-LED tsena.
3. As Make Noise hona joale e fana ka Multiple the Signal Output Multiple (ho tloha ho MATHS ea pele) e fetotsoe ho Output ea Unity Signal. E lumella ho theha mefuta e 'meli ea tlhahiso, e 'ngoe e le bonngoeng' me e 'ngoe e sebetsoa ka Attenuverter. E boetse e lumella ho nolofatsa likarabo tsa ts'ebetso ea ho patching ha ho khonehe ka taolo ea Vari-Response feela (sheba leqephe la 13).
4. Ho ekelitsoe tlhahiso e Inverted SUM bakeng sa menyetla e mengata ea ho feto-fetoha ha maemo.
5. Pontšo ea LED bakeng sa Sum Bus e kentsoe molemong oa tlhokomeliso e eketsehileng ea mats'oao.
6. Letšoao la LED le ile la eketsoa ho bonts'a boemo ba Qetellong ea Rise le End Of Cycle.
7. End-of-Cycle Output e se e thibetsoe bakeng sa botsitso bo ntlafalitsoeng ba potoloho.
8. Tšireletso ea matla e ekelitsoeng ka morao.
9. E kenyellelitsoe +/-10V offset range. Mosebelisi o na le khetho ea +/- 10V offset ho CH. 2 kapa +/-5V offset ho CH. 3.
10. E kenyellelitse mefuta e mengata ea Logarithmic taolong ea Vari-Response e lumellang mokhoa oa East Coast Portamen-to.
11. Phetoho ea potoloho ke Cycle Input e lumellang voltage taolo ea boemo ba Cycle ho Mecha ea 1 le ea 4. Hekeng e Phahameng, Lipotoloho tsa MATHS. Ho Heke e tlase, MATHS ha e bikele (ntle le haeba konopo ea Cycle e kentsoe).

PANEL MOLAOLI

1. Keletso ea Letšoao: Direct Coupled input to circuit. Sebelisa bakeng sa Lag, Portamento, ASR (Attack Sustain Release mofuta enfelopo). Hape, kenya ho Sum/OR Bus. Range +/-10V.
2. Kenyo ea ho Qala: Keiti kapa Pulse e kentsoeng ho kenyelletso ena e qala potoloho ho sa tsotelehe ts'ebetso ho Kenyelletso ea Letšoao. Sephetho ke ts'ebetso ea 0V ho 10V, aka Envelope, eo litšobotsi tsa eona li hlalosoang ke litekanyetso tsa Rise, Fall, le Vari-Response. Sebelisa bakeng sa Enfelopo, Pulse Delay, Clock Division, le LFO Reset (feela nakong ea karolo ea Falling).
3. Cycle LED: Idicates Cycle ON or OFF.
4. Konopo ea Baesekele: E etsa hore potoloho e iketsetse potoloho, ka hona e hlahisa molumo o iphetangtage sebetsa, e leng LFO. Sebelisa bakeng sa LFO, Clock, le VCO.
5. Phahamisa Panel Control: E beha nako eo e e nkang bakeng sa voltage sebetsa ho ramp holimo. Ho potoloha ha CW ho eketsa nako ea ho phahama.
6. Phahamisa Ketso ea CV: Letšoao la taolo ea linear bakeng sa paramethara ea Rise. Matshwao a Positive Control a eketsa Nako ya Ho Phahamisa, mme matshwao a Negative a fokotsa nako ya Rise Time mabapi le setlankana sa taolo ya Rise panel. Range +/-8V.
7. Taolo ea Phanele ea ho oa: E beha nako eo e e nkang bakeng sa voltage sebetsa ho ramp fatshe. Ho potoloha ha CW ho eketsa Nako ea hoetla.
8. Kenyelletso ea CV ka bobeli: Kenyelletso ea lets'oao la taolo ea Bi-Polar Exponential bakeng sa ts'ebetso eohle. Ho fapana le Ho phahama le ho oa ha Litlhahiso tsa CV, BOTHO bo na le karabelo ea Exponential 'me matšoao a Positive a fokotsa nako eohle ha matšoao a Negative a eketsa nako eohle. Range +/-8V.
9. Kenyelletso ea CV ea ho oa: Letšoao la taolo ea mohala bakeng sa parameter ea Fall. Lipontšo tse ntle tsa taolo li eketsa nako ea hoetla, 'me matšoao a Negative a fokotsa Nako ea hoetla mabapi le taolo ea phanele ea Fall. Range +/-8V.

MATHS Channel 1

1. Vari-Response Panel Control: E beha curve ea karabo ea voltagmosebetsi oa. Karabelo e lula e fetoha ho tloha ho Logarithmic ho ea ho Linear ho ea ho Exponential ho Hyper-Exponential. Letšoao la Tike le bontša litlhophiso tsa Linear.
2. Kenyelletso ea Potoloho: Holima Heke HIGH, Lipotoloho li ntse li tsoela pele. Ho Heke LOW, MATHS ha e Cycle (ntle le haeba konopo ea Cycle e kentsoe). E hloka bonyane +2.5V bakeng sa HIGH.
3. EOR LED: E supa maemo a EOR Output. Leseli ha EOR E PHAHAMA.
4. Qetello Ya Tsoha Output (EOR): E nyolohela hodimo qetellong ya Rise karolo ya tshebetso. 0V kapa 10V.
5. Unity LED: E bontša tšebetso ka har'a potoloho. Positive voltages tala, le negative voltage khubelu. Range +/-8V.
6. Unity Signal Output: Letšoao le tsoang ho potoloho ea Channel 1. 0-8V ha U Palama Baesekele. Ho seng joalo, tlhahiso ena e latela ampboholo ba ho kenya letsoho.

MATHS Channel 4

1. Kenyo ea ho Qala: Heke kapa Pulse e sebelisitsoeng ho kenyelletso ena e qala potoloho ho sa tsotelehe ts'ebetso ho Kenyelletso ea Letšoao. Sephetho ke ts'ebetso ea 0V ho 10V, aka Envelope, eo litšobotsi tsa eona li hlalosoang ke litekanyetso tsa Rise, Fall, le Vari-Response. Sebelisa bakeng sa Enfelopo, Pulse Delay, Clock Division, le LFO Reset (feela nakong ea karolo ea Falling).
2. Keletso ea Letšoao: Direct Coupled input to circuit. Sebelisa bakeng sa Lag, Portamento, ASR (Attack Sustain Release mofuta enfelopo). Hape, kenya ho Sum/OR Bus. Range +/-10V.
3. Cycle LED: E bonts'a Cycle ON kapa TIMA.
4. Konopo ea Baesekele: E etsa hore potoloho e iketsetse potoloho, ka hona e hlahisa molumo o iphetangtage sebetsa, e leng LFO. Sebelisa bakeng sa LFO, Clock, le VCO.
5. Rise Panel Control: E beha nako eo e e nkang bakeng sa voltage sebetsa ho ramp holimo. Ho potoloha ha CW ho eketsa nako ea ho phahama.
6. Phahamisa Ketso ea CV: Letšoao la taolo ea linear bakeng sa Rise parameter. Matshwao a Positive Control a eketsa Nako ya Ho Phahamisa, mme matshwao a Negative a fokotsa nako ya Rise Time mabapi le setlankana sa taolo ya Rise panel. Range +/-8V.
7. Taolo ea Phanele: E beha nako eo e e nkang bakeng sa voltage sebetsa ho ramp fatshe. Ho potoloha ha CW ho eketsa Nako ea hoetla.
8. Kenyelletso ea CV ka bobeli: Kenyelletso ea lets'oao la taolo ea Bi-Polar Exponential bakeng sa ts'ebetso eohle. Ho fapana le ho phahama le ho oa ha CV Inputs, BOTHO ba na le karabelo ea Exponential le matšoao a Positive control a fokotsa nako eohle ha mats'oao a Negative a eketsa nako eohle. Range +/-8V.
9. Kenyelletso ea CV: Kenyelletso ea lets'oao la taolo ea mohala bakeng sa paramethara ea Fall. Lipontšo tse ntle tsa taolo li eketsa nako ea hoetla, 'me matšoao a Negative a fokotsa Nako ea hoetla mabapi le taolo ea phanele ea Fall. Range +/-8V.

MATHS Channel 4

1. Vari-Response Panel Control: E beha curve ea karabo ea voltagmosebetsi oa. Karabelo e lula e fetoha ho tloha ho Logarithmic ho ea ho Linear ho ea ho Exponential ho Hyper-Exponential. Letšoao la Tike le bontša litlhophiso tsa Linear.
2. Kenyelletso ea Potoloho: Holima Heke HIGH, Lipotoloho li ntse li tsoela pele. Ho Heke LOW, MATHS ha e Cycle (ntle le haeba konopo ea Cycle e kentsoe). E hloka bonyane +2.5V bakeng sa HIGH.
3. EOC LED: E supa maemo a Qetello ea Cycle Output. Leseli ha EOC e Phahameng.
4. Qetella Cycle Output (EOC): E nyolohela holimo qetellong ea karolo ea Hoetla ea tšebetso. 0V kapa 10V.
5. Unity LED: Ie fana ka ts'ebetso ka har'a potoloho. Positive voltages tala, le negative voltage khubelu. Range +/-8V.
6. Unity Signal Output: Letšoao le tsoang ho potoloho ea Channel 4. 0-8V ha U Palama Baesekele. Ho seng joalo, tlhahiso ena e latela ampboholo ba ho kenya letsoho.

SUM le OR Bese

1. Kenyeletso ea Letšoao la Direct Coupled Channel 2: E tloaelehile ho referense ea +10V bakeng sa tlhahiso ea voltage offsets. Mefuta e Kenyellelitsoeng +/-10Vpp.
2. Kenyeletso ea Letšoao la Direct Coupled Channel 3: E tloaelehile ho referense ea +5V bakeng sa tlhahiso ea voltage offsets. Mefuta e Kenyellelitsoeng +/-10Vpp.
3. CH. 1 Attenuverter Control: E fana ka scaling, attenuation, and inversion ea lets'oao le sebetsoang kapa le hlahisoang ke CH. 1. E hokahane le CH. 1 Sephetho se Fetohang le Sum/Kapa Bese.
4. CH. 2 Attenuverter Control: E fana ka scaling, attenuation, amplification, le phetoho ea patch ea matšoao ho CH. 2 Kenyo ya Matshwao. Ha ho na pontšo e teng, e laola boemo ba sete e hlahisoang ke CH. 2.
   • E hokahane le CH. 2 Sephetho se Fetohang le Kakaretso/Kapa Bese.
5. CH. 3 Attenuverter Control: E fana ka scaling, attenuation, amplification, le phetoho ea patch ea matšoao ho CH. 3 Kenyo ya Matshwao. Ha ho na pontšo e teng, e laola boemo ba offset e hlahisoang ke CH. 3.
   • E hokahane le CH. 3 E feto-fetohang OUT le Sum/OR Bese.
6. CH. 4 Attenuverter Control: E fana ka scaling, attenuation, and inversion ea lets'oao le sebetsoang kapa le hlahisoang ke CH. 4. E hokahane le CH. 4 Sephetho se Fetohang le Kakaretso / KAPA Bese.

SUM le OR Bese

1. CH. 1-4 Liphetho tse Fetohang: Letšoao le sebelisitsoeng le sebetsoa ka litsamaiso tse tsamaellanang tsa kanale. E tloaelehile ho ea ho SUM le OR libese. Ho kenya thapo ea patch ho tlosa lets'oao ho tsoa ho SUM le libese tsa OR. Sehlahisoa Range +/-10V.
2. KAPA Sephetho sa Bese: Sephetho sa mosebetsi oa Analog Logic OR ho litlhophiso tsa li-control tsa attenuverter bakeng sa Channels 1, 2, 3, le 4. Range 0V ho 10V.
3. SUM Bus Output: Kakaretso ea voltages ho litlhophiso tsa li-control tsa attenuverter bakeng sa Channels 1, 2, 3, le 4. Range +/-10V.
4. Sephetho se Keneng sa SUM: Letšoao le tsoang ho SUM Output le khelohile. Range +/-10V.
5. Li-LED tsa Libese tsa SUM: Hlahisa voltagts'ebetso e ka har'a bese ea SUM (ka hona, le SUM e Inverted). LED e khubelu e bonts'a matla a fosahetsengtages. LED e tala e bonts'a voltages.

REA QALA

MATHS e behiloe holimo ho ea tlase, ka likarolo tse lekanang lipakeng tsa CH. 1 le 4. Lisebelisoa tsa mats'oao li ka holimo, li lateloa ke li-control tsa phanele le lisebelisoa tsa matšoao a taolo bohareng. Liphetho tsa matšoao li ka tlase ho module. Li-LED li behiloe haufi le letšoao leo li le bontšang. Liteishene tsa 1 le 4 li ka lekanya, tsa sotha, kapa tsa kopanya lets'oao le kenang. Ha ho se na lets'oao le sebelisitsoeng, li-Chan-neel tsena li ka etsoa ho hlahisa mefuta e mengata ea mela, logarithmic, kapa exponential mesebetsi e amohelang seqhutsu, kapa nako le nako ha Cycle e sebetsa. Phapang e le 'ngoe e nyane pakeng tsa CH. 1 le 4 li maemong a tsona a Pulse Outputs; CH.1 e nang le Qetello ea Phallo le CH. 4 e nang le Bofelo ba Cycle. Sena se entsoe ho thusa ho theha mesebetsi e rarahaneng e sebelisang CH ka bobeli. 1 le 4. Likanale tsa 2 le 3 li ka sekala, ampphahamisa, le ho kgelosa sesupo se kenang. Ha ho sa sebelisoe lets'oao la kantle, liteishene tsena li hlahisa li-offsets tsa DC. Phapang feela pakeng tsa CH. 2 le 3 ke hore CH. 2 e hlahisa +/- 10V sete ha Ch. 3 e hlahisa +/-5V offset.
Likanale tse 4 kaofela li na le liphetho (tse bitsoang Variable Outputs) tse tloahelehileng ho SUM, Inverted SUM, le OR bese e le hore ho kenyeletsoa, ​​​​ho tlosa, ho fetola, le ho kheloha ha analoji KAPA ho finyelloa. Ho kenya polaka ka har'a li-sockets tsena tsa Variable Output ho tlosa lets'oao le amanang le libese tsa SUM le OR (Channel 1 le 4 li na le liphetho tsa bonngoe, tse SA tloaelehileng ho SUM le OR bese). Liphetho tsena li laoloa ke li-Attenuverters tse 4 tse bohareng ba mojule.

Keletso ea Pontšo

Lintlha tsena kaofela li hokahane ka kotloloho le potoloho ea tsona e amanang. Sena se bolela hore ba ka fetisa matshwao a medumo le taolo. Lintho tsena tse kenang li sebelisetsoa ho sebetsana le taolo ea ka ntle voltages. CH. 1 le 4 Signal Input e ka boela ea sebelisoa ho hlahisa lienfelopo tsa mofuta oa Attack/Stain/ Retolle ho tsoa lets'oao la heke. Likanale tsa 2 le 3 le tsona li tloaelehile ho ba voltage le hore ho se na letho le khomaretsoeng ho kenyelletsong, mocha oo o ka sebelisoa bakeng sa tlhahiso ea voltage offsets. Sena se na le thuso bakeng sa ho fetola boemo ba ts'ebetso kapa lets'oao le leng le leng ho e 'ngoe ea Likanale tse ling ka ho eketsa molumotage offset ho lets'oao leo le ho nka SUM Output.

Kenya Input

CH. 1 le 4 le tsona li na le tlhahiso ea Trigger. Heke kapa pulse e sebelisitsoeng ho kenyelletso ena e hlahisa potoloho e amanang le eona ho sa tsotelehe ts'ebetso ea Lipontšo tsa Matshwao. Sephetho ke ts'ebetso ea 0V ho ea ho 10V, aka Envelope, eo litšobotsi tsa eona li hlalosoang ke litekanyetso tsa Rise, Fall, Vari-Response, le Attenuverter. Ts'ebetso ena e nyoloha ho tloha ho 0V ho ea ho 10V mme hang-hang e oa ho tloha 10V ho ea ho 0V. HA HO TŠEPISO. Ho fumana ts'ebetso ea enfelopo e tsitsitseng, sebelisa Signal Input (sheba ka holimo). MATHS e qala hape nakong ea ha karolo e oelang ea tšebetso empa HA E qale hape karolong e ntseng e phahama ea tšebetso. Sena se lumella karohano ea oache le heke kaha MATHS e ka hlophisoa hore e hlokomolohe lioache le liheke tse kenang ka ho beha Nako ea ho Phahamisa hore e be kholo ho feta nako e lipakeng tsa Lioache le/kapa Liheke tse kenang.

Baesekele

Konopo ea Cycle le Cycle Input ka bobeli li etsa ntho e le 'ngoe: li etsa hore MATHS e ikemisetse, e leng mantsoe a majabajaba bakeng sa LFO! Ha u batla LFO, etsa MATHS Cycle.

TSOHA PHAHAMENG VARI-KARABELO

• Litaolo tsena li theha lets'oao le hlahisoang ho Unity Signal Output le Liphetoho tse feto-fetohang bakeng sa CH. 1 le 4. Litaolo tsa Rise and Fall li etsa qeto ea hore na potoloho e arabela kapele kapa butle hakae ho matshwao a kenyelelitsoeng ho Kenyelletso ea Letšoao le Kenyelletso ea ho Qala. Nako e fapaneng e kholo ho feta Enfelopo e tloaelehileng kapa LFO. MATHS e etsa hore mesebetsi e be butle joalo ka metsotso e 25 (Rise and Fall full CW le matshwao a taolo a kantle a kentsweng ho kena ho "slow-ver-drive") le ka lebelo la 1khz (sekhahla sa molumo).
• Rise e beha nako eo potoloho e e nkang ho fihla bophahamong ba voltage. Ha e qala potoloho e qala ho 0V mme e tsamaea ho fihla ho 10V. Rise e etsa qeto ea hore na ho nka nako e kae hore sena se etsahale. Ha e sebelisoa ho sebetsa taolo ea kantle voltages lets'oao le sebelisitsoeng ho Kenyeletso ea Letšoao le ntse le eketseha, lea fokotseha, kapa le maemong a tsitsitseng (ha le etse letho). Rise e etsa qeto ea hore na lets'oao leo le ka eketseha ka potlako hakae. Ntho e le 'ngoe eo MATHS e ke keng ea e etsa ke ho sheba bokamoso ho tseba moo lets'oao la taolo ea kantle le lebileng teng, ka hona, MATHS e ke ke ea eketsa sekhahla sa molumo oa kantle.tage fetoha, e ka sebetsa ho ea hona joale le ho e liehisa (kapa ea e lumella ho feta ka lebelo le ts'oanang).
• Hoetla ho beha nako eo potoloho e e nkang ho theohela ho bonyane ba voltage. Ha e qala voltage qala ho 0V 'me e tsamaea ho fihlela ho 10V, ho 10V moeli o ka holimo o fihletsoe le vol.tage qala ho theohela tlase ho 0V. Ho oa ho etsa qeto ea hore na ho nka nako e kae hore sena se etsahale. Ha e sebelisoa ho sebetsa taolo ea kantle voltages lets'oao le sebelisitsoeng ho Kenyeletso ea Letšoao le ntse le eketseha, lea fokotseha, kapa le maemong a tsitsitseng (ha le etse letho). Ho oa ho etsa qeto ea hore na lets'oao leo le ka fokotseha kapele hakae. Kaha e ke ke ea sheba bokamoso ho tseba moo lets'oao la taolo ea kantle le lebileng teng, MATHS e ke ke ea eketsa lebelo leo molumo oa kantle.tage fetoha, e ka sebetsa ho ea hona joale le ho e liehisa (kapa ea e lumella ho feta ka lebelo le ts'oanang).
• Ka bobeli Rise le Fall li na le lintlha tse ikemetseng tsa CV bakeng sa voltage laola holim'a mekhahlelo ena. Haeba ho hlokahala hore u fokotsehe, sebelisa CH. 2 kapa CH. 3 ka letoto ho ea sebakeng se lakatsehang. Ntle le Litlhahiso tsa Li-CV tsa Rise and Fall, ho boetse ho na le Litlhahiso tse peli tsa CV.
• Kenyelletso ea CV ka bobeli e fetola sekhahla sa ts'ebetso eohle. E boetse e arabela ka mokhoa o fapaneng le Ho phahama le ho oa ha Litlhahiso tsa CV. More positive voltage etsa hore ts'ebetso eohle e be khuts'oane mme e be leqhubu le lebetage etsa hore tšebetso eohle e be telele.
• Karabelo e fapaneng e bopa litekanyetso tse kaholimo tsa phetoho (Ho phahama/Ho oa) ho ba Logarithmic, Linear, kapa Exponential (le tsohle tse lipakeng tsa libopeho tsena).
• Ka karabelo ea LOG, sekhahla sa phetoho se fokotseha ha voltage ea eketseha.
• Ka karabelo ea EXPO, sekhahla sa phetoho se eketseha ha voltage ea eketseha. Karabelo ea Linear ha e na phetoho ka sekhahla joalo ka voltage fetoha.

PONTŠO TŠOANE

• Ho na le liphetho tse ngata tse fapaneng tsa matšoao ho MATHS. Kaofela li lutse botlaaseng ba mojule. Tse ngata tsa tsona li na le li-LED tse lutseng haufi le moo ho bonts'ang mats'oao.

Liphetoho tse fapaneng

• Liphetho tsena li ngotsoe 1, 2, 3, le 4 'me li amahanngoa le li-control tse 'nè tsa Attenuverter bohareng ba mojule. Liphetho tsena kaofela li laetsoe ke litlhophiso tsa litsamaiso tse amanang le tsona, joalo-joalo. CH. 1 ho isa ho 4 Taolo ea Attenuverter.
• Li-jack tsena kaofela li tloaelehile ho SUM le OR Bus. Ha ho na letho le khomaretsoeng liphethong tsena, lets'oao le amanang le kentsoe ho SUM le OR Bus. Ha o penta thapo ho e 'ngoe ea li-jacks tsa tlhahiso, lets'oao le amanang le tla tlosoa ho SUM le OR Bese. Liphetho tsena li bohlokoa ha u e-na le sebaka sa ho feto-fetoha ha molumo moo ho se nang phokotso kapa phetoho e teng (litlhahiso tsa CV ho MATHS kapa FUNCTION modules for ex.ample).
• Li boetse li na le thuso ha u batla ho etsa phapang ea lets'oao le fapaneng ampboholo kapa mohato.

BAKENG SA

• Ena ke Qetello ea Phallo ea Phallo bakeng sa CH. 1. Ena ke pontšo ea ketsahalo. E ka ba 0V kapa 10V mme ha ho letho lipakeng. E fetohela ho 0V, kapa Low ha ho se na ts'ebetso.
• Ketsahalo ena tabeng ena ke ha Channel e amanang le eona e fihla holimo ka ho fetisisatage e tsamayang ho yona. Ena ke lets'oao le letle leo u ka le khethang bakeng sa LFO ea ho Clock kapa ea Pulse-shaped.
• E boetse e na le thuso bakeng sa Pulse Delay le karohano ea oache kaha Rise e beha nako eo e e nkang hore tlhahiso ena e nyolohe.

EOC TSOA

• Ena ke tlhahiso ea End Cycle bakeng sa CH. 4. Ena ke pontšo ea ketsahalo. E ka ba 0V kapa 10V mme ha ho letho lipakeng. E fetohela ho +10V, kapa Holimo ha ho se na tšebetso.
• Ketsahalo ena tabeng ena ke ha Channel e amanang le eona e fihla bophahamong bo tlaase ka ho fetisisatage e tsamayang ho yona. LED e amanang le eona e ntse e sebetsa ha ho se letho le etsahalang. Ena ke lets'oao le letle leo u ka le khethang bakeng sa LFO ea ho Clock kapa ea Pulse-shaped.

Unity Signal Outs (CH. 1 le 4)

• Liphetho tsena li tlatsitsoe ka kotloloho ho tsoa bohareng ba Channel e amanang. Ha ba angoe ke Attenuverter ea Channel.
• Ho kopanya sehlahisoa sena HA HO tlose lets'oao ho SUM le OR Libese. Ena ke tlhahiso e ntle eo u ka e sebelisang ha u sa hloke ho fokotseha kapa ho fetoha kapa ha u batla ho sebelisa lets'oao ka boikemelo le ka har'a SUM/OR Bese.

KAPA TSOA

• Ena ke tlhahiso e tsoang ho potoloho ea analoge OR. Lintho tse kenang ke CH. 1, 2, 3, le 4 Liphetho tse Fetohang. E lula e hlahisa molumo o phahameng ka ho fetisisatage tsoa ho tsohle voltage sebelisoa ho tse kenang. Batho ba bang ba re sena ke Maximum Voltage selector potoloho! Li-attenuators li lumella ho beha boima ba matšoao. Ha e arabele ho negative voltages, ka hona e ka boela ea sebelisoa ho lokisa lets'oao.
• E bohlokoa bakeng sa ho theha mefuta e fapaneng ea modulation kapa ho romella CV ho likenyelletso tse arabelang feela ho voltages (mohlala, Hlophisa Kenyeletso ea CV ho PHONOGENE).

TS'OANE KA

• Sena ke se hlahisoang ke potoloho ea analog SUM. Lintho tse kenang ke CH. 1, 2, 3, le 4 Liphetho tse Fetohang. Ho ipapisitse le hore na li-Attenuverters li setiloe joang, u ka eketsa, ua khelosa kapa ua fokotsa matlatage tsoa ho e mong ho sebelisa potoloho ena.
• Ena ke tlhahiso e ntle eo u ka e sebelisang bakeng sa ho kopanya matšoao a 'maloa a taolo ho hlahisa li-modulation tse rarahaneng.

INV TSOA

• Ena ke mofuta o sothehileng oa SUM Output. E u lumella ho feto-fetoha le maemo!

LIKELETSO LEQETSA

• Lipotoloho tse telele li fihlelleha ka li-curve tse ngata tsa karabo ea Logarithmic. Mesebetsi e potlakileng, e bohale ka ho fetesisa e fihlelleha ka karabelo e feteletseng ea Exponential.
• Ho lokisoa ho curve ea karabelo ho ama Nako ea ho Phahamisa le ho oa.
• Ho fihlella nako e telele kapa e khuts'oane ea ho Phahamisa le ho oa ho feta e fumanehang ho tsoa ho Panel Controls, sebelisa molumotage offset ho Lits'ebetso tsa Signal Control. Sebelisa CH. 2 kapa 3 bakeng sa voltage.
• Sebelisa Sephetho sa INV SUM moo o hlokang ho feto-fetoha ha molumo oa lentsoe empa o se na mokhoa oa ho fetolela sebakeng sa CV (Mix CV Input on ECHOPHON, for ex.ample).
• Ho fana ka lets'oao le sothehileng ho tsoa ho MATHS ho khutlela ho MATHS leha e le efe ea CV ho bohlokoa haholo bakeng sa ho theha likarabo tse sa kengoang ke taolo ea Vari-Response feela.
• Ha o sebelisa SUM le OR Outputs, seta CH efe kapa efe e sa sebelisoeng. 2 kapa 3 ho isa ho 12:00 kapa kenya thapo ea patch ea dummy ho Signal Input ea Channel e amanang le ho qoba liphoso tse sa batleheng.
• Haeba ho lakatseha hore lets'oao le sebetsoe kapa le hlahisoa ke CH. 1, 4 e fumaneha ka bobeli ho SUM, INV, le OR libese MME e fumaneha e le tlhahiso e ikemetseng, sebelisa Unity Signal Output, kaha HA E tloaelehe ho SUM le OR Buss.
• KAPA Output ha e arabele kapa e hlahisa negative voltages.
• Qetellong ea Rise le End of Cycle li na le thuso bakeng sa ho hlahisa taolo e rarahaneng voltage sebetsa moo CH. 1 le CH. 4 li hlohlelletsoa ke tse ling. Ho etsa sena, kopanya EOR kapa EOC ho liteishene tse ling tsa Trigger, Signal, le Cycle.

LIEKETSENG PHATALA

Tloaelehileng Voltage Controlled Triangle Function (Triangle LFO)

1. Beha CH.1 (kapa 4) ho Cycle. Beha Taolo ea Phanele ea Rise and Fall ho fihlela mots'ehare, Vari-Response to Linear.
2. Beha CH.2 Attenuverter ho 12:00.
3. Kopanya SUM Outputs ho Lintho tse peli tsa Taolo.
4. Ka boikhethelo, sebelisa mokhoa ofe kapa ofe o lakatsehang oa ho feto-fetoha ha maqhubu ho CH.3 Signal Input 'me butle u fetole attenuator ea eona ho ea ka oache.
5. Eketsa CH.2 Attenuverter ho fetola Frequency.
6. Sephetho se nkiloe ho Polelo ea Lets'oao la Mohala o amanang.
7. Ho beha liparamente tsa Rise le Fall ho fana ka lipotoloho tse telele. Ho beha liparamente tsena ka tsela e fapaneng ho fana ka lipotoloho tse khutšoane, ho fihlela sekhahla sa molumo.
8. Mosebetsi o hlahisoang o ka 'na oa sebetsoa hape ka ho fokotsoa le/kapa ho khelosoa ke Attenuverter e amanang le eona. Ntle le moo, nka tlhahiso e tsoang ho Cycling Channel's UNITY Output 'me u kopanye Liphetoho tse Fetohang ho Phahamisa kapa Ho oa CV Input ho morph libopeho tsa LFO ka CH.1 (kapa 4) Attenuverter.

Tloaelehileng Voltage Controled Ramp Mosebetsi (Saw/ Ramp LFO)

Hoa tšoana le ka holimo, parameter ea Rise feela e behiloe ka ho feletseng ka tsela e fapaneng, "Fall parameter" e behiloe bonyane motšehare.

Moqtage Controlled Transient Function Jenereithara (Attack/ Decay EG)

• Pulse kapa heke e kentsoeng ho Trigger Input ea CH.1 kapa 4 e qala ts'ebetso ea nakoana e Tsoang ho tloha ho 0V ho ea ho 10V ka sekhahla se khethiloeng ke Rise parameter ebe e theoha ho tloha 10V ho ea ho 0V ka sekhahla se khethiloeng ke "Fall parameter".
• Ts'ebetso ena e ka qala hape nakong ea karolo e oelang. Rise and Fall e khona ho laoleha ka boikemelo, ka karabelo e fapaneng ho tloha ho Log ho ea ho Linear ho ea ho Exponential, joalo ka ha ho behiloe ke Vari-Response panel Control.
• Mosebetsi o hlahisoang o ka 'na oa sebetsoa hape ka ho fokotsoa le/kapa ho khelosoa ke Attenuverter.

Moqtage Controlled Sustained Function Jenereithara (A/S/R EG)

• Heke e sebelisoang ho Signal Input ea CH.1 kapa 4 e qala ts'ebetso, e Phahamisang ho tloha 0V ho ea boemong ba Heke e sebelisitsoeng, ka tekanyo e khethiloeng ke Rise parameter, E tšehetsa boemong boo ho fihlela letšoao la Heke le fela, ebe le oela ho tloha boemong boo ho ea ho 0V ka tekanyo e khethiloeng ke parameter ea Fall.
• Tsoha le Ho oa li ikemetse voltage laoleha, ka karabelo e feto-fetohang joalokaha e behiloe ke Vari-Re-sponse panel Control.
• Ts'ebetso e hlahisoang e ka 'na ea sebetsoa hape ka ho fokotsoa le/kapa ho khelosoa ke Attenuverter.

Peak Detector

1. Letšoao la patch le tla fumanoa ho CH. Kenyo e 1 ea Lets'oao.
2. Beha Phahamiso le Hoetla ho 3:00.
3. Fumana tlhahiso ho tsoa ho Signal Output. Keke ea Output ho tsoa ho EOR Output.

Moqtage Seipone

1. Etsa kopo Control Signal hore e be seipone Ho CH. 2 Kenyo ya Matshwao.
2. Beha CH. 2 Attenuverter ho CCW e felletseng.
3. Ha ho letho le kentsoeng ho CH. 3 Pontsho ya Pontsho (ho hlahisa offset), seta CH. 3 Attenuvert-er ho CW e felletseng.
4. Fumana tlhahiso ho tsoa ho SUM Output.

Half Wave Tokiso

1. Kenya letšoao la bi-polar ho CH. 1, 2, 3, kapa 4 Maikutlo.
2. Nka tlhahiso ho tsoa ho OR Output.
3. Ela hloko maemo a tloaelehileng ho OR bese.

Tloaelehileng Voltage Controlled Pulse/Clock with Voltage Controlled Run/Stop (Clock, pulse LFO)

1. E ts'oana le Tloaelehileng Voltage Controlled Triangle Function, ke tlhahiso feela e nkiloeng ho EOC kapa EOR.
2. CH.1 Rise parameter ka katleho e fetola makhetlo a mangata 'me CH.1 Fall parameter e fetola bophara ba pulse.
3. Ka CH.4, se fapaneng ke 'nete, moo Rise e fetolang ka katleho Width le Fall fetola maqhubu.
4. Litacheng ka bobeli, litokiso tsohle ho li-parameter tsa Rise le Fall li ama khafetsa.
5. Sebelisa CYCLE Input for Run/Stop control.

Moqtage Controlled Pulse Delay Processor

1. Etsa kopo ea Trigger kapa Heke ho Hlahisa Kenyeletso haeba CH.1.
2. Nka tlhahiso ho tloha End Of Rise.
3. Paramethara ea ho phahama e beha tieho mme paramente ea Fall e fetola bophara ba sekhahla se hlahisoang.

Arcade Trill (Complex LFO)

1. Beha CH4 Rise and Fall ho fihlela mots'ehare, karabelo ho Exponential.
2. Kopanya EOC ho multiple, ebe ho CH1 Trigger Input le CH2 Input.
3. Fetola taolo ea phanele ea CH2 ho 10:00.
4. Kopanya CH2 Output ho CH1 BOTH BOTH Input.
5. Beha CH1 Tsoha ho fihlela har'a mots'ehare, Ho oela ka ho felletseng, karabelo ho Linear.
6. Kenya letsoho CH4 Cycle switch (CH1 ha ea lokela ho ba libaesekele).
7. Sebelisa Unity Output CH1 sebakeng sa modulation.
8. Fetola taolo ea phanele ea CH1 Rise bakeng sa phapang (liphetoho tse nyane li na le phello e matla molumong).

Chaotic Trill (e hloka MMG kapa sefe se seng sa Direct Coupled LP)

1. Qala ka patch ea Arcade Trill.
2. Beha CH.1 Attenuverter ho 1:00. Etsa kopo ea CH.1 Signal Output ho MMG DC Signal Input.
3. Kopanya EOR ho MMG AC Signal Input, e hlophiselitsoe ho LP mode, ha ho maikutlo. Qala ka Freq ka ho felletseng khahlanong le oache.
4. Etsa kopo ea MMG Signal Output ho MATHS CH.4 Bobeli Input.
5. Kopanya CH.4 Sephetho se Fetohang ho CH.1 BOBELI Kenyeletso ea CV.
6. Unity Signal Output to modulation lecation.
7. Litaolo tsa MMG Freq le Signal Input le MATHS CH1 le 4 Attenuverters li na le thahasello e kholo ho phaella ho litekanyetso tsa Rise and Fall.

281 Mode (E rarahaneng LFO)

1. Karolong ena, CH1 le CH4 li sebetsa ka mokhoa o ts'oanang ho fana ka mesebetsi e fetotsoeng ka likhato tse mashome a robong.
2. Ha li-Switch tsa Cycle tse peli li sebetsa, kopanya Qetello ea RISE (CH1) ho Trigger Inverter CH4.
3. Patch End of Cycle (CH4) ho Qalisa Kenyeletso CH1.
4. Haeba ka bobeli CH1 le CH4 li sa qale ho palama libaesekele, sebelisana le CH1 Cycle hakhutšoanyane.
5. Ka libaesekele tse peli tsa liteishene, sebelisa liphetho tsa bona tsa Signal libakeng tse peli tse fapaneng tsa modulation, bakeng sa ex.ample, Likanale tse peli tsa OPTOMIX.

Tloaelehileng Voltage Laolang ADSR-mofuta Enfelopo

1. Kenya lets'oao la Heke ho Kenyeletso ea Letšoao la CH1.
2. Beha CH1 Attenuverter ho tlase ho CW e felletseng.
3. Kopanya CH1 Qetello ea Phahamiso ho ea ho CH4 Hlahisa Kenyeletso.
4. Beha CH4 Attenuverter ho CW e felletseng.
5. Nka tlhahiso ho tsoa ho OR bese Output, u na le bonnete ba hore CH2 le CH3 li behiloe har'a mots'ehare ha li sa sebelisoe.
6. Sebakeng sena, CH1 le CH4 Rise li laola Nako ea Tlhaselo. Bakeng sa ADSR e tloaelehileng, fetola liparamente tsena hore li tšoane (Ho beha CH1 Rise hore e be telele ho feta CH4 kapa ka tsela e fapaneng, e hlahisa tse peli tse hlaselang.tages).
7. CH4 Fall parameter e fetola Decay stage ea enfelopo.
8. CH1 Attenuverter e beha boemo ba Sustain bo tlamehang ho ba ka tlase ho paramethara eona eo ho CH4.
9. Qetellong, CH1 Fall e beha Nako ea Phallo.

Bouncing Ball, khatiso ea 2013 - ka lebaka la Pete Speer

1. Beha CH1 Rise e tletseng CCW, Fall to 3:00, karabelo ho Linear.
2. Beha CH4 Phahamisa ka botlalo ho fapana le oache, Hoetla ho 11:00, karabelo ho Linear.
3. Kopanya CH1 EOR ho CH4 Cycle Input, le CH1 e feto-fetohang Output ho CH4 Fall Input.
4. Patch CH4 Output ho VCA kapa LPG control Input.
5. Kopanya Heke kapa Mohloli oa Trigger (joalo ka heke ea ho thetsa ho tloha ho Pressure Points) ho ea ho CH1 Trigger Input bakeng sa ho qala ka letsoho ho "bounces."
6. Fetola CH4 Rise and Fall bakeng sa mefuta e fapaneng.

Independent Contours - ka lebaka la Navs

Ka ho fetola boemo le polarity ea Variable Output ea CH1/4 le Attenuverter, le ho fepa lets'oao leo ho khutlela ho CH1/4 ho Rise or Fall Control Input, taolo e ikemetseng ea letsoapo le ts'oanang e ea fihleloa. Nka Output ho tsoa ho Unity Signal Output. Molemo ka ho fetisisa ke ho ba le "Response panel control" hore e be motšehare.

Lithako tse Ikemetseng tsa Complex

• Hoa tšoana le ka holimo, empa taolo e eketsehileng e ka khoneha ka ho sebelisa EOC kapa EOR ho qala Channel e fapaneng le ho sebelisa SUM kapa OR Output to Rise, Fall, kapa BOTH ea Channel ea pele.
• Fetola Rise, Fall, Attenuversion, le curve ea karabo ea liteishene tse fapaneng ho fihlela libopeho tse fapaneng.

Asymmetrical Trilling Envelope - ka lebaka la Walker Farrell

1. Kenya letsoho ho palama baesekele ho CH1, kapa kenya lets'oao la khetho ea hau ho Trigger kapa Signal Input.
2. Beha CH1 Rise and Fall ho fihlela mots'ehare ka karabo ea Linear.
3. Kopanya CH1 EOR ho CH4 Cycle Input.
4. Beha CH4 Rise ho isa ho 1:00 le Hoetla ho isa ho 11:00, ka karabelo e ikhethang.
5. Nka tlhahiso ho tsoa ho OR (ka CH2 le CH3 e behiloeng ho fihlela motšehare).
6. Enfelopo e hlahisoang e na le "trill" nakong ea karolo ea hoetla. Fetola maemo le linako tsa Ho phahama/Ho oa.
7. Ntle le moo, fetola liteishene 'me u sebelise Tlhahiso ea EOC ho CH1's Cycle input bakeng sa trilling nakong ea karolo ea ho phahama.

Molateli oa Enfelopo

1. Kenya lets'oao le lokelang ho lateloa ho Kenyelletso ea Letšoao CH1 kapa 4. Beha Ho phahama ho fihlela mots'ehare.
2. Beha kapa ho hlophisa Nako ea hoetla ho fihlela likarabo tse fapaneng.
3. Fumana tlhahiso ho tsoa ho "Channel Signal Output" e amanang le eona bakeng sa Pono ea Peak e ntle le e mpe.
4. Nka tlhahiso ho tsoa ho OR bese Output ho fihlela mosebetsi o tloaelehileng oa Positive Envelope Follower.

Moqtage Comparator/Heke Extraction w/ bophara bo fapaneng

1. Kenya lets'oao le tla bapisoa le Kenyo ea Letšoao la CH3. Beha Attenuverter ho feta 50%.
2. Sebelisa CH2 ho bapisa voltage (ka kapa ntle le ntho e patisitsoeng).
3. Kopanya SUM Output ho CH1 Signal Input.
4. Beha CH1 Rise and Fall ho CCW e felletseng. Nka Heke e ntšitsoeng ho EOR.
   • CH3 Attenuverter e sebetsa joalo ka boemo ba ho kenya, litekanyetso tse sebetsang li pakeng tsa mots'ehare le CW e felletseng. CH2 e sebetsa e le moeli oa ho beha litekanyetso tse sebetsang ho tloha ho Full CCW ho isa ho 12:00.
   • Litheko tse haufi le 12:00 ke litekanyo tse TLASE. Ho beha Rise ho feta CW, o ka Liehisa Heke e nkiloeng.
   • Ho beha Ho oa ho feta CW ho fapana bophara ba Heke e nkiloeng. Sebelisa CH4 bakeng sa patch ea enfelopo ea Follower, le CH3, 2 & 1 bakeng sa ho ntša Gate, 'me u na le tsamaiso e matla haholo bakeng sa ts'ebetso ea matšoao a kantle.

Tokiso e Felletseng ea Leqhubu

1. Letšoao la mult le tla lokisoa ho bobeli CH2 le 3 Input.
2. CH2 Scaling/ Inversion set to Full CW, CH3 Scaling/Inversion set to Full CCW.
3. Nka tlhahiso ho tsoa ho OR Output. Fetola Sekala.

Katiso

1. Kenya lets'oao la taolo e nepahetseng hore le atolosoe ho CH1 kapa 4 Signal Input. Etsa hore e be CW e felletseng, e Oele ho CCW e Felletseng.
2. Sebelisa Pontšo ea Taolo ea li-multiplier tse ngata ho BOTH Control Input.
3. Fumana tlhahiso ho tsoa ho Signal Output e tsamaellanang.

Pseudo-VCA e nang le clipping - Thanx ho Walker Farrell

1. Kopanya lets'oao la molumo ho CH1 ka Rise and Fall ka ho felletseng, kapa o pokele CH1 ka sekhahla sa molumo.
2. Ntša tlhahiso ho tsoa ho SUM.
3. Beha boemo ba pele ka taolo ea phanele ea CH1.
4. Beha taolo ea phanele ea CH2 CW e felletseng ho hlahisa 10V offset. Molaetsa o qala ho kokota mme o ka khutsa. Haeba e ntse e utloahala, sebelisa e 'ngoe e ntle ea offset ka taolo ea phanele ea CH3 ho fihlela e khutsitse.
5. Beha taolo ea phanele ea CH4 ho CCW e felletseng 'me u sebelise enfelopo ho Signal Input kapa u hlahise enfelopo e nang le CH4.
   • Patch ena e theha VCA e nang le asymmetrical clipping ka har'a waveform. E sebetsa le CV hape, empa etsa bonnete ba hore o fetola litlhophiso tsa ho kenya CV ho sebetsana le setsi se seholo sa offset. Sephetho sa INV se ka ba molemo haholo maemong a mang.

Moqtage Controlled Clock Divider

• Letšoao la oache le sebelisitsoeng ho Trigger Input CH1 kapa 4 le sebetsoa ke divisor joalo ka ha ho behiloe ke Rise parameter.
• Keketseho ea Rise e beha karohano holimo, e baka likarohano tse kholo. Nako ea hoetla e fetola bophara ba oache e hlahisoang. Haeba bophara bo lokisoa hore bo be boholo ho feta nako eohle ea karohano, tlhahiso e lula e le "phahameng."

FLIP-FLOP (1-Bit Memori)

• Karolong ena, CH1 Trigger Input e sebetsa e le "Set" input, 'me CH1 BOTH Control Input e sebetsa e le "Reset" Input.
  1. Kenya lets'oao la ho Seta Botjha ho CH1 BOTH Control Input.
  2. Kenya Keke kapa lets'oao la logic ho CH1 Trigger Input. Beha Tsoha ho CCW e Felletseng, Ho oela ho CW e Felletseng, Vari-Re-sponse ho Linear.
  3. Nka "Q" tlhahiso ho tsoa ho EOC. Patch EOC ho CH4 Signal ho fihlela "NOT Q" ho EOC Output.
• Patch ena e na le moeli oa ho hopola metsotso e ka bang 3, ka mor'a moo e lebala ntho e le 'ngoe eo u e boleletseng hore e e hopole.

Logic Inverter

• Kenya logic heke ho CH. 4 Kenyeletso ya Matshwao. Nka tlhahiso ho tsoa ho CH. 4 EOC.

Comparator/Sereki sa Heke (Nka e Ncha)

1. Romela lets'oao le tla bapisoa le Kenyeletso ea CH2.
2. Beha taolo ea phanele ea CH3 sebakeng se fosahetseng.
3. Kenya SUM ho Kenyelletso ea Letšoao la CH1.
4. Beha CH1 Ho phahama le ho oa ho 0.
5. Nka tlhahiso ho tsoa ho CH1 EOR. Sheba polarity ea lets'oao ka CH1 Unity LED. Ha lets'oao le tsamaea hantle, EOR ea tsamaea.
6. Sebelisa taolo ea phanele ea CH3 ho beha moeli. Ho ka 'na ha hlokahala ho fokotsa CH2 ho fumana sebaka se nepahetseng bakeng sa lets'oao le fanoeng.
7. Sebelisa CH1 Fall control ho etsa hore liheke li be telele. CH1 Rise control e beha bolelele ba nako eo lets'oao le tlamehang ho ba kaholimo ho moeli ho khopisa sebali.

TIISETSO MOEKETSI

• Etsa Noise e fana ka tumello ea hore sehlahisoa sena se hloke sekoli thepa kapa kaho bakeng sa selemo se le seng ho tloha ka letsatsi la theko (bopaki ba theko/invoice boa hlokahala).
• Ho se sebetse hantle ho bakoang ke phepelo e fosahetseng ea motlakase voltages, ho khutlela morao kapa ho khutlisetsoa morao kapa ho khutlisetsoa morao kapa ho khutlisetsoa morao ha khokahanyo ea cable ea eurorack, tšebeliso e mpe ea sehlahisoa, ho tlosa likonopo, ho fetola li-faceplates, kapa lisosa life kapa life tse khethiloeng ke Make Noise hore ke molato oa mosebedisi ha li koaheloe ke tiisetso ena, 'me litefiso tse tloaelehileng tsa tšebeletso li tla sebetsa. .
• Nakong ea waranti, lihlahisoa life kapa life tse nang le phoso li tla lokisoa kapa ho nkeloa sebaka, ka khetho ea Etsa Lerata, ka ho khutlela leratong ha moreki a lefa litšenyehelo tsa ho etsa Lerata.
• Make Noise e bolela ebile ha e amohele boikarabello bakeng sa kotsi ho batho kapa lisebelisoa tse bakiloeng ke ts'ebetso ea sehlahisoa sena.
• Ka kopo ikopanye technical@makenoisemusic.com ka lipotso life kapa life, Khutlela ho Tumello ea Moetsi, kapa litlhoko le litlhaloso. http://www.makenoisemusic.com

Mabapi le Buka ena:

• E ngotsoe ke Tony Rolando
• E hlophisitsoeng ke Walker Farrell
• E tšoantšitsoe ke W.Lee Coleman le Lewis Dahm Layout ke Lewis Dahm
• KEA LEBOHA
• Thuso ea ho Rala: Matthew Sherwood
• Mohlahlobi oa Beta: Walker Farrell
• Lihlooho tsa Tlhahlobo: Joe Moresi, Pete Speer, Richard Devine

LBH

• P: Na MATHS e ka sebelisoa le li-synthesizer tsa dijithale?
  • A: MATHS e etselitsoe tšebeliso ea analog empa e khona ho hokahana le li-synthesizer tsa dijithale ka matšoao a Gate/Clock.
• P: Nka etsa liphetoho tsa tempo joang ka MATHS?
  • A: O ka etsa liphetoho tsa tempo ka ho sebelisa mesebetsi ea Enfelopo le ho fetola molumotages ho ramp hodimo kapa tlase ka tempo.
• P: Sepheo sa Cycle Input ke sefe?
  • A: The Cycle Input e lumella voltage laola boemo ba Cycle ho Channels 1 le 4, e nolofalletsang ho palama libaesekele ho latela matšoao a Gate.

Litokomane / Lisebelisoa

ETSA LErata la Maths Complex Function Jenereithara Eurorack Module [pdf] Buka ea Taelo Maths Complex Function Generator Eurorack Module, Maths, Complex Function Generator Eurorack Module, Function Generator Eurorack Module, Generator Eurorack Module, Eurorack Module

Litšupiso

• Bukana ea Mosebelisi