Mee mkpọtụ mgbakọ na mwepụ arụ ọrụ Generator Eurorack Module

Nkọwapụta

• Aha ngwaahịa: MATS
• Ụdị: Kọmputa Analog maka ebumnuche egwu
• Ọrụ: Voltage Envelopu a na-achịkwa, LFO, Nhazi akara ngosi, Ọgbọ mgbaama
• Ọsọ iche: +/-10V

Ntuziaka ojiji ngwaahịa

Nwụnye

Tupu echichi, rụtụ aka na nkọwapụta onye nrụpụta ikpe gị maka ebe ọkọnọ adịghị mma. Gbaa mbọ hụ na njikọ ike kwesịrị ekwesị.

gafereview

Emebere MATHS maka ebumnuche egwu ma na-enye ọrụ dị iche iche gụnyere imepụta ọrụ, ijikọ akara, ampikwado, ibelata, mgbama na-atụgharị, na ndị ọzọ.

Njikwa panel

1. Ntinye akara: Jiri maka Lag, Portamento, na ASR envelopu. Oke +/- 10V.
2. Ntinye ntinye: Ọnụ ụzọ ámá ma ọ bụ Pulse na-akpali sekit ka ịmepụta envelopes, Pulse Delay, Clock Division, na LFO Reset.

Bilie, daa, na nzaghachi dị iche iche

• Akụkụ nke Rise, Fall, and Vari-Response parameters na-akọwapụta njirimara nke envelopu nke ntinye Trigger mepụtara.

Mpụta mgbaàmà

• Ngwaahịa a na-enye nsonaazụ mgbaàmà dị iche iche gụnyere envelopu, ngalaba elekere, na ndị ọzọ. Rụtụ aka na ntuziaka maka echiche patch zuru ezu.

Ndụmọdụ & aghụghọ

• Nyochaa ijikọta akara njikwa dị iche iche iji mepụta modul dị mgbagwoju anya. Nwalee na modulating voltages na imepụta ihe omume egwu dabere na mmetụta mmegharị n'ime sistemụ.

Echiche mkpọchi

• Rụtụ aka na ntuziaka maka ụzọ okike iji kpachie MATHS na modul ndị ọzọ dị na sistemụ gị maka ọgbọ ụda pụrụ iche na ohere mgbanwe.

Ịwụnye

Ihe ize ndụ eletrik!

• Gbanyụọ akpa Eurorack mgbe niile wee kwụpụ eriri ọkụ tupu ịkwunye ma ọ bụ ịtọpụ eriri njikọ bọọdụ ụgbọ ala Eurorack ọ bụla. Emetụkwala ọdụ ọkụ eletrik ọ bụla aka mgbe ị na-ejikọ eriri bọọdụ ụgbọ ala Eurorack ọ bụla.
• Mee Noise MATHS bụ usoro egwu eletrọnịkị chọrọ 60mA nke + 12VDC na 50mA nke -12VDC vol.tage na ebe nchekwa nkesa ahaziri nke ọma iji rụọ ọrụ. A ga-etinyerịrị ya nke ọma n'ime igbe usoro ihe nrụpụta modul nke Eurorack.
• Gaa na http://www.makenoisemusic.com/ maka examples nke Eurorack Systems na Okwu.
• Iji wụnye, chọta 20HP na gị Eurorack synthesizer case, gosi na nwụnye kwesịrị ekwesị nke Eurorack bọọdụ ụgbọ ala njikọ USB na azụ nke a modul (lee foto n'okpuru), na ikwunye bọs njikọ eriri ụgbọ ala n'ime Eurorack style bọọdụ ụgbọ ala, na-eche na polarity nke mere na RED stripe na cable na-adabere na NEGATIVE 12 osisi na modul na bu ụzọ.
• Na Mee Noise 6U ma ọ bụ 3U Busboard, eriri ọcha na-egosi ahịrị 12 Volt adịghị mma.
• Biko rụtụ aka na nkọwapụta nke onye nrụpụta ikpe gị maka ebe ọkọnọ adịghị mma.

GỤKWUOVIEW

MAHS bụ kọmpụta analọk emebere maka ebumnuche egwu. N'ime ihe ndị ọzọ, ọ na-enye gị ohere:

1. Mepụta ụdị ahịrị dị iche iche, logarithmic, ma ọ bụ exponential kpalitere ma ọ bụ ọrụ na-aga n'ihu.
2. Gwakọta mgbaama mbata.
3. Ampmee ka ọ dị elu, mebie ma tụgharịa mgbaama na-abata.
4. Tinye, wepụ, na OR ruo akara anọ.
5. Mepụta akara ngosi analọg sitere na ozi dijitalụ (Ọnụ ụzọ/elekere).
6. Mepụta ozi dijitalụ (Ọnụ ụzọ/elekere) site na mgbama analọgụ.
7. Detuo ozi dijitalụ (Ọnụ Ụzọ Ámá/elekere).

Ọ bụrụ na ndepụta a dị n'elu na-agụ dị ka sayensị karịa egwu, ebe a bụ ntụgharị asụsụ:

1. Voltage Envelopu a na-achịkwa ma ọ bụ LFO dị nwayọ ka nkeji 25 yana ngwa ngwa dịka 1khz.
2. Tinye Lag, Slew, ma ọ bụ Portamento iji jikwaa voltages.
3. Gbanwee omimi nke modulation wee gbanwee azụ azụ!
4. Jikọta akara njikwa ihe ruru 4 iji mepụta ngbanwe dị mgbagwoju anya karịa.
5. Ihe omume egwu dịka Ramping elu ma ọ bụ ala na Tempo, na iwu.
6. Ịmalite mmemme egwu mgbe ị na-ahụ mmegharị na sistemụ.
7. Nkewa ndetu egwu na/ma ọ bụ Flam.

Ndozigharị MATHS 2013 bụ nwa sitere na MATHS mbụ, na-ekerịta otu sekit isi ma na-ewepụta akara njikwa niile mara mma nke mbụ nwere ike iwepụta, mana yana ụfọdụ nkwalite, mgbakwunye, na mgbanwe.

1. Agbanwela nhazi nke njikwa ka ọ bụrụ nke nwere nghọta na ịrụ ọrụ nke ọma na CV Bus na modul ndị dị na sistemụ anyị dị ka DPO, MMG, na ECHPHON.
2. Ihe ngosi LED maka akara ka emelitere iji gosi ma volta dị mma na nke na-adịghị mmatages yana ịbawanye mkpebi ngosi. Ọbụna obere voltages nwere ike ịgụ na LEDs ndị a.
3. Dị ka Mee Noise ugbu a na-enye Multiple Multiple Signal Output Multiple (site na MATHS mbụ) agbanweela ka ọ bụrụ Mpụta Mgbama Unitydị n'otu. Ọ na-enye ohere ịmepụta ọdịiche abụọ nke mmepụta, otu na ịdị n'otu na nke ọzọ dị ka esitere site na Attenuverter. Ọ na-enye ohere maka ịdị mfe na nzaghachi ọrụ nchikota agaghị ekwe omume na njikwa nzaghachi Vari naanị (lee pg. 13).
4. Agbakwunyela mpụta SUM tụgharịrị maka ohere mgbanwe ka ukwuu.
5. agbakwunyere ihe ngosi LED maka Sum Bus maka mmụba mgbama.
6. Agbakwunyere ihe ngosi LED iji gosi steeti Ọgwụgwụ nke Rise na Ọgwụgwụ nke okirikiri.
7. A na-echekwa mmepụta ngwụcha nke okirikiri maka nkwụsi ike sekit ka mma.
8. agbakwunyere ngbanwe ike nchebe.
9. agbakwunyere +/- 10V oke nkwụghachi. Onye ọrụ nwere nhọrọ nke mbelata +/- 10V na CH. 2 ma ọ bụ +/-5V kwụsịrị na CH. 3.
10. Agbakwunyere oke Logarithmic ka ukwuu na njikwa nzaghachi Vari na-enye ohere maka ụdị East Coast Portamen-to.
11. Evolushọn na sekit bụ ntinye okirikiri nke na-enye ohere maka voltage akara nke steeti Cycle na Channels 1 na 4. Na Gate High, MATHS Cycles. Na ọnụ ụzọ ámá dị ala, MATHS anaghị emegharị (ọ gwụla ma bọtịnụ Cycle na-arụ ọrụ).

Njikwa panel

1. Ntinye akara: Ntinye aka jikọtara na sekit. Jiri maka Lag, Portamento, ASR (Atack Sustain Release ụdị envelopes). Ọzọkwa, tinye na Sum/OR ụgbọ ala. Oke +/- 10V.
2. Ntinye ntinye: Ọnụ ụzọ ámá ma ọ bụ Pulse etinyere na ntinye a na-akpali sekit n'agbanyeghị ọrụ dị na ntinye aka mgbaama. Ihe si na ya pụta bụ ọrụ 0V ruo 10V, aka envelopu, nke njirimara ya na-akọwapụta site na oke Rise, Fall, na Vari-Response. Jiri maka envelopu, igbu oge, nkeji elekere, na nrụpụta LFO (naanị n'oge akụkụ ọdịda).
3. LED okirikiri: Ina-egosi Cycle ON ma ọ bụ gbanyụọ.
4. Bọtịnụ okirikiri: Na-eme ka sekit ahụ na-emegharị onwe ya, si otú a na-emepụta volta ugboro ugborotage ọrụ, aka LFO. Jiri maka LFO, Elekere, na VCO.
5. Rise Panel Control: Na-ewepụta oge ọ na-ewe maka voltage ọrụ ka ramp elu. CW ntụgharị na-abawanye oge Rise.
6. Ntinye CV bilie: Ntinye akara akara Linear maka oke Rise. Ihe nrịbama njikwa dị mma na-abawanye Oge Rise, yana akara njikwa na-adịghị mma na-ebelata Oge Rise gbasara ntọala njikwa otu Rise. Oke +/-8V.
7. Njikwa panel ọdịda: Na-ewepụta oge ọ na-ewe maka voltage ọrụ ka ramp gbadaa. Ntugharị CW na-abawanye Oge ọdịda.
8. Ntinye CV abụọ a: Ntinye nrịbama njikwa Exponential Bi-Polar maka ọrụ niile. N'adịghị ka ịrị elu na ọdịda nke ntinye CV, BOTH nwere nzaghachi Exponential na akara njikwa ziri ezi na-ebelata oge mkpokọta ebe akara njikwa na-adịghị mma na-abawanye oge. Oke +/-8V.
9. Ntinye CV ọdịda: Ntinye akara akara ahịrị maka oke ọdịda. Ngosipụta njikwa dị mma na-abawanye oge ọdịda, yana akara njikwa na-adịghị mma na-ebelata oge ọdịda gbasara njikwa panel ọdịda. Oke +/-8V.

Ọwa MATS 1

1. Njikwa Panel nzaghachi dị iche iche: Na-edozi usoro nzaghachi nke voltage ọrụ. Nzaghachi a na-agbanwe nke ukwuu site na Logarithmic site na Linear ruo Exponential na Hyper-Exponential. Akara akara na-egosi ntọala Linear.
2. Ntinye okirikiri: Na ọnụ ụzọ ámá HIGH, cycles na. Na ọnụ ụzọ ámá LOW, MATHS anaghị agba ọsọ (ọ gwụla ma bọtịnụ Cycle etinyere ya). Achọrọ opekempe +2.5V maka HIGH.
3. EOR LED: Na-egosi steeti nke mmepụta EOR. Ọkụ mgbe EOR dị elu.
4. Ọgwụgwụ nke Rise Mmepụta (EOR): Na-aga elu na njedebe nke akụkụ Rise nke ọrụ ahụ. 0V ma ọ bụ 10V.
5. Ịdị n'otu LED: Na-egosi ọrụ dị n'ime sekit. Ezi voltages green, na adịghị mma voltages na-acha uhie uhie. Oke +/-8V.
6. Ngosipụta Ịdị n'Otu: Mgbama sitere na sekit Channel 1. 0-8V mgbe ị na-agba ígwè. Ma ọ bụghị ya, mmepụta a na-esote amplitude nke ntinye.

Ọwa MATS 4

1. Ntinye ntinye: Ọnụ ụzọ ámá ma ọ bụ Pulse etinyere na ntinye a na-akpali sekit n'agbanyeghị ọrụ dị na ntinye aka mgbaama. Ihe si na ya pụta bụ ọrụ 0V ruo 10V, aka envelopu, nke njirimara ya na-akọwapụta site na oke Rise, Fall, na Vari-Response. Jiri maka envelopu, igbu oge, nkeji elekere, na nrụpụta LFO (naanị n'oge akụkụ ọdịda).
2. Ntinye akara: Ntinye aka jikọtara na sekit. Jiri maka Lag, Portamento, ASR (Atack Sustain Release ụdị envelopes). Ọzọkwa, tinye na Sum/OR ụgbọ ala. Oke +/- 10V.
3. Ikanam okirikiri: Na-egosi ịgbanwuo ma ọ bụ gbanyụọ.
4. Bọtịnụ okirikiri: Na-eme ka sekit ahụ na-emegharị onwe ya, si otú a na-emepụta volta ugboro ugborotage ọrụ, aka LFO. Jiri maka LFO, Elekere, na VCO.
5. Njikwa Panel Bilie: Na-ewepụta oge ọ na-ewe maka voltage ọrụ ka ramp elu. CW ntụgharị na-abawanye oge Rise.
6. Bilie ntinye CV: Ntinye akara akara Linear maka oke Rise. Ihe nrịbama njikwa dị mma na-abawanye Oge Rise, yana akara njikwa na-adịghị mma na-ebelata Oge Rise gbasara ntọala njikwa otu Rise. Oke +/-8V.
7. Njikwa panel ọdịda: Na-ewepụta oge ọ na-ewe maka voltage ọrụ ka ramp gbadaa. Ntugharị CW na-abawanye Oge ọdịda.
8. Ntinye CV abụọ a: Ntinye nrịbama njikwa Exponential Bi-Polar maka ọrụ niile. N'adịghị ka ịrị elu na ọdịda nke ntinye CV, BOTH nwere nzaghachi Exponential na akara njikwa ziri ezi na-ebelata oge mkpokọta ebe akara njikwa na-adịghị mma na-abawanye oge. Oke +/-8V.
9. Ntinye CV ọdịda: Ntinye akara akara ahịrị maka oke ọdịda. Ngosipụta njikwa dị mma na-abawanye oge ọdịda, yana akara njikwa na-adịghị mma na-ebelata oge ọdịda gbasara njikwa panel ọdịda. Oke +/-8V.

Ọwa MATS 4

1. Njikwa Panel nzaghachi dị iche iche: Na-edozi usoro nzaghachi nke voltage ọrụ. Nzaghachi a na-agbanwe nke ukwuu site na Logarithmic site na Linear ruo Exponential na Hyper-Exponential. Akara akara na-egosi ntọala Linear.
2. Ntinye okirikiri: Na ọnụ ụzọ ámá HIGH, cycles na. Na ọnụ ụzọ ámá LOW, MATHS anaghị agba ọsọ (ọ gwụla ma bọtịnụ Cycle etinyere ya). Achọrọ opekempe +2.5V maka HIGH.
3. EOC LED: Na-egosi steeti njedebe nke mmepụta okirikiri. Ọkụ mgbe EOC dị elu.
4. Mmepụta okirikiri njedebe (EOC): Na-aga elu na njedebe nke akụkụ ọdịda nke ọrụ ahụ. 0V ma ọ bụ 10V.
5. Ịdị n'otu LED: Ina-egosi ọrụ dị n'ime sekit. Ezi voltages green, na adịghị mma voltages na-acha uhie uhie. Oke +/-8V.
6. Ngosipụta Ịdị n'Otu: Mgbama sitere na sekit Channel 4. 0-8V mgbe ị na-agba ígwè. Ma ọ bụghị ya, mmepụta a na-esote amplitude nke ntinye.

SUM na OR ụgbọ ala

1. Ntinye nrịbama ọwa 2 agbakwunyere ozugbo: Haziri ka ọ bụrụ ntụaka +10V maka ọgbọ nke voltage offsets. Oke ntinye +/- 10Vpp.
2. Ntinye nrịbama ọwa 3 agbakwunyere ozugbo: Haziri ka ọ bụrụ ntụaka +5V maka ọgbọ nke voltage offsets. Oke ntinye +/- 10Vpp.
3. CH. 1 Njikwa Attenuverter: Na-enye maka ntule, attenuation, na ntụgharị nke mgbaàmà nke CH na-ahazi ma ọ bụ mepụta ya. 1. Ejikọrọ na CH. 1 Mpụta mgbanwe na Sum/ma ọ bụ ụgbọ ala.
4. CH. 2 Njikwa Attenuverter: Na-enye maka scaling, attenuation, amplification, na ntụgharị nke akara mgbaama na CH. 2 Ntinye nrịbama. Na-enweghị mgbaama ọ bụla, ọ na-achịkwa ọkwa nke nhazi nke CH mepụtara. 2.
   • Ejikọrọ na CH. 2 Mpụta mgbanwe na mkpokọta/OR ụgbọ ala.
5. CH. 3 Njikwa Attenuverter: Na-enye maka scaling, attenuation, amplification, na ntụgharị nke akara mgbaama na CH. 3 Ntinye nrịbama. Na-enweghị mgbaama ọ bụla, ọ na-achịkwa ọkwa nkwụghachi nke CH mepụtara. 3.
   • Ejikọrọ na CH. 3 Mpụga na Sum/OR Bus dị iche iche.
6. CH. 4 Njikwa Attenuverter: Na-enye maka ntule, attenuation, na ntụgharị nke mgbaàmà nke CH na-ahazi ma ọ bụ mepụta ya. 4. Ejikọrọ na CH. 4 Mpụta mgbanwe na mkpokọta/OR ụgbọ ala.

SUM na OR ụgbọ ala

1. CH. 1-4 Mpụta dị iche iche: A na-ahazi akara ngosi etinyere site na njikwa ọwa kwekọrọ. Haziri ya na bọs SUM na OR. Ịtinye eriri patch na-ewepụ akara ngosi na bọs SUM na OR. Oke mmepụta +/- 10V.
2. OR Mpụta ụgbọ ala: Nsonaazụ nke Analog Logic OR ọrụ na ntọala nke attenuverter njikwa maka Channels 1, 2, 3, na 4. Range 0V ka 10V.
3. Mpụta ụgbọ ala SUM: Nchikota nke etinyere voltages ka ntọala nke attenuverter njikwa maka ọwa 1, 2, 3, na 4. Range +/-10V.
4. Mbupute SUM tụgharịrị: Mgbama sitere na nsonaazụ SUM tụgharịrị gbadaa. Oke +/- 10V.
5. Igwe ọkụ SUM ụgbọ ala: gosi voltage na-eme na bọs SUM (na ya mere, SUM Inverted nakwa). Uhie uhie na-egosi volta adịghị mmatages. Green LED na-egosi nti voltages.

NA-AMALITE

MATHS bụ n'elu ruo na ala, nwere njiri njiri anya n'etiti CH. 1 na 4. Ihe ntinye mgbaàmà dị n'elu, na-esote njikwa panel na ntinye akara akara n'etiti. Nsonaazụ mgbaàmà dị na ala nke modul. A na-edobe ọkụ ọkụ n'akụkụ akara ngosi ha na-egosi. Ọwa 1 na 4 nwere ike tụọ, tụgharịa, ma ọ bụ jikọta mgbama na-abata. Na-enweghị mgbaama etinyere, enwere ike ịme Chan-nels ndị a ka ha wepụta ọrụ ahịrị dị iche iche, logarithmic, ma ọ bụ ihe nrịbama na nnabata nke ihe mkpalite, ma ọ bụ na-aga n'ihu mgbe Cycle na-arụ ọrụ. Otu obere ọdịiche dị n'etiti CH. 1 na 4 dị na Mpụta Pulse nke ha; CH.1 nwere njedebe nke Rise na CH. 4 nwere ngwụcha okirikiri. Emere nke a iji kwado ịmepụta ọrụ dị mgbagwoju anya na-eji ma CH. 1 na 4. Ọwa 2 na 3 nwere ike ịba ụba, amptọgharịa, ma tụgharịa mgbaama mbata. Na-enweghị mgbama mpụga etinyere, ọwa ndị a na-ewepụta DC akwụ ụgwọ. Naanị ihe dị iche n'etiti CH. 2 na 3 bụ nke ahụ CH. 2 na-ewepụta ntọala +/- 10V ebe Ch. 3 na-ebute mbelata +/- 5V.
Ọwa 4 niile nwere nsonaazụ (nke a na-akpọ Mpụta mgbanwe) nke emeziri ka ọ bụrụ ụgbọ ala SUM, Inverted SUM, na OR ka mgbakwunye, mwepu, ntụgharị, na mgbagha analọg OR nwere ike nweta. Ịtinye plọg n'ime oghere ndị a na-agbanwe agbanwe na-ewepụ mgbaama ejikọta ya na ụgbọ ala SUM na OR (Ọwa 1 na 4 nwere mmepụta ịdị n'otu, nke na-adịghị ahazi na SUM na OR ụgbọ ala). A na-achịkwa mmepụta ndị a site na 4 Attenuverters na etiti modul.

Ntinye aka

Ntinye ndị a niile jikọtara ya na sekit metụtara ya. Nke a pụtara na ha nwere ike ịfefe ma ọdịyo na akara njikwa. A na-eji ntinye ndị a iji hazie njikwa mpụga voltages. CH. Enwere ike iji ntinye ntinye akara 1 na 4 mepụta envelopu ụdị ọgụ/njide / mwepụta site na mgbama ọnụ ụzọ ámá. A na-ahazikwa ọwa 2 na 3 ka ọ bụrụ voltage nrụtụ aka ka n'enweghị ihe ọ bụla etinyere na ntinye, enwere ike iji ọwa ahụ maka ọgbọ nke voltage offsets. Nke a bara uru maka ịmegharị ọrụ ma ọ bụ mgbama ọzọ dị n'otu ọwa ndị ọzọ site na ịgbakwunye voltage kwụsịrị na mgbama ahụ wee were mmepụta SUM.

Ntinye ntinye

CH. 1 na 4 nwekwara ntinye Trigger. Ọnụ ụzọ ma ọ bụ usu etinyere na ntinye a na-ebute sekit metụtara n'agbanyeghị ọrụ dị na ntinye aka mgbaama. Ihe si na ya pụta bụ ọrụ 0V ruo 10V, aka envelopu, nke njirimara ya na-akọwapụta site na oke Rise, Fall, Vari-Response, na Attenuverter. Ọrụ a na-ebili site na 0V ruo 10V wee daa ozugbo site na 10V ruo 0V. Ọ BỤGHỊ Nkwado. Iji nweta ọrụ na-akwado envelopu, jiri ntinye mgbaama (lee n'elu). MAHS na-akpalite ọzọ n'oge akụkụ ọrụ na-ada ada mana ọ naghị akpalitekwa akụkụ ọrụ ahụ na-arị elu. Nke a na-enye ohere nkewa elekere na ọnụ ụzọ ámá ebe ọ bụ na enwere ike ịhazi MATHS ileghara elekere na ọnụ ụzọ mbata anya site na ịtọ oge Rise ka ọ dị ukwuu karịa oge n'etiti elekere na/ma ọ bụ ọnụ ụzọ mbata.

okirikiri

Bọtịnụ Cycle na ntinye okirikiri na-eme otu ihe ahụ: ha na-eme MATHS onwe oscillate aka Cycle, nke bụ naanị okwu mara mma maka LFO! Mgbe ịchọrọ LFO, mee usoro MATHS.

Bilie ọdịda VARI-azaghachi

• Njikwa ndị a na-akpụzi mgbaama nke na-apụta na Mgbama Unity Unity and Variable Output maka CH. 1 na 4. Njikwa Rise na Fall na-ekpebi otú ngwa ngwa ma ọ bụ jiri nwayọọ sekit na-anabata akara ndị etinyere na ntinye aka na ntinye na-akpali akpali. Ogologo oge dị ukwuu karịa envelopu ma ọ bụ LFO. MATHS na-emepụta ọrụ ngwa ngwa dị ka nkeji 25 (Bilie na Fall zuru CW na akara njikwa mpụga agbakwunyere ịbanye na "slow-ver-drive") yana ngwa ngwa dị ka 1khz (ọnụego ọdịyo).
• Rise na-esetịpụ oge sekit ga-ewe iji mee njem ruo oke voltage. Mgbe akpalitere sekit na-amalite na 0V ma na-aga ruo 10V. Rise na-ekpebi ogologo oge ọ ga-ewe maka nke a ime. Mgbe ejiri ya hazie njikwa mpụga voltages mgbama etinyere na ntinye aka mgbaama na-abawanye, na-ebelata, ma ọ bụ n'ọnọdụ kwụ ọtọ (anaghị eme ihe ọ bụla). Bilie na-ekpebi ngwa ngwa mgbama ahụ nwere ike ịbawanye. Otu ihe MATHS enweghị ike ime bụ ileba anya n'ọdịniihu ka ịmata ebe mgbama njikwa mpụga na-aga, yabụ MATHS enweghị ike ịbawanye ọnụego nke mpụta vol.tage na-agbanwe / na-emegharị, ọ nwere ike ime naanị ugbu a ma mee ka ọ kwụsịlata (ma ọ bụ kwe ka ọ gafee n'otu ọsọ ahụ).
• Ọdịda na-esetịpụ oge sekit ga-ewe iji mee njem gbadaa na volta kacha ntatage. Mgbe kpaliri voltage na-amalite na 0V wee gaa ihe ruru 10V, na 10V a na-eru elu elu na vol.tage na-amalite ịdaba azụ na 0V. Fall na-ekpebi ogologo oge ọ ga-ewe maka nke a ime. Mgbe ejiri ya hazie njikwa mpụga voltages mgbama etinyere na ntinye aka mgbaama na-abawanye, na-ebelata, ma ọ bụ n'ọnọdụ kwụ ọtọ (anaghị eme ihe ọ bụla). Ọdịda na-ekpebi ngwa ngwa mgbama ahụ nwere ike ibelata. Ebe ọ bụ na ọ nweghị ike ileba anya n'ọdịnihu ịmata ebe mgbama njikwa mpụga na-aga, MATHS enweghị ike ịbawanye ọnụego nke volta dị na mpụga.tage na-agbanwe / na-emegharị, ọ nwere ike ime naanị ugbu a ma mee ka ọ kwụsịlata (ma ọ bụ kwe ka ọ gafee n'otu ọsọ ahụ).
• Ma Rise na Fall nwere ntinye CV nọọrọ onwe ya maka voltage ịchịkwa ndị a parameters. Ọ bụrụ na achọrọ attenuation, jiri CH. 2 ma ọ bụ CH. 3 n'usoro ruo ebe achọrọ. Na mgbakwunye na ntinye na Rise na Fall CV, enwekwara ihe ntinye CV abụọ.
• Ntinye CV abụọ a na-agbanwe ọnụego ọrụ niile. Ọ na-azakwa n'ụzọ dị iche na ịrị elu na ọdịda nke ntinye CV. Nke kacha mma voltages na-eme ka ọrụ dum dị mkpụmkpụ ma na-adịghị mma voltages-eme ka dum ọrụ ogologo.
• Nzaghachi Vari na-akpụzi ọnụego mgbanwe dị n'elu (Bilie/Fall) ka ọ bụrụ Logarithmic, Linear, ma ọ bụ Exponential (na ihe niile dị n'etiti ụdị ndị a).
• Site na nzaghachi LOG, ọnụego mgbanwe na-ebelata ka voltage na -abawanye.
• Site na nzaghachi EXPO, ọnụego mgbanwe na-abawanye ka voltage na-abawanye. Nzaghachi Linear enweghị mgbanwe na ọnụego dị ka voltage agbanwe.

Mpụta akara

• Enwere ọtụtụ mgbaama dị iche iche na MAHS. Ha niile dị na ala nke modul. Ọtụtụ n'ime ha nwere LED dị nso maka ihe ngosi nke akara ngosi.

Ọpụpụ mgbanwe

• A na-akpọ mmepụta ndị a 1, 2, 3, na 4 ma jikọta ya na njikwa Attenuverter anọ dị n'etiti etiti modul. A na-ekpebi nsonaazụ ndị a niile site na ntọala nke njikwa ha jikọtara, esp. nke CH. 1 ruo 4 njikwa Attenuverter.
• A na-ejikarị jakị ndị a niile na SUM na OR ụgbọ ala. Na-enweghị ihe ọ bụla agbakwunyere na ntinye ndị a, a na-agbanye mgbaama jikọtara n'ime SUM na OR Bus. Mgbe ị na-akwachi eriri n'ime nke ọ bụla n'ime jakị mmepụta ndị a, a ga-ewepụ akara ejikọtara na SUM na OR Bus. Nsonaazụ ndị a bara uru ma ọ bụrụ na ị nwere ebe mgbagharị ebe enweghị ntugharị ma ọ bụ ntụgharị dị (ntinye CV na MATHS ma ọ bụ FUNCTION modul maka ex.ample).
• Ha na-abakwa uru mgbe ịchọrọ ịmepụta mgbanwe nke mgbaàmà nke dị na iche amplitude ma ọ bụ nkeji.

MAKA MAKA

• Nke a bụ njedebe nke ịrị elu maka CH. 1. Nke a bụ mgbama mmemme. Ọ bụ ma na 0V ma ọ bụ 10V na ọ dịghị ihe n'etiti. Ọ na-adabara na 0V, ma ọ bụ dị ala mgbe enweghị ọrụ.
• Ihe omume dị na nke a bụ mgbe ọwa jikọtara na-eru elu voltage nke ọ na-aga. Nke a bụ ezigbo mgbama ịhọrọ maka Clocking ma ọ bụ ụdị Pulse LFO.
• Ọ dịkwa uru maka Pulse Delay na elekere elekere ebe ọ bụ na Rise na-ewepụta oge ọ na-ewe maka mmepụta a ka ọ dị elu.

EOC pụọ

• Nke a bụ mmepụta okirikiri ngwụcha maka CH. 4. Nke a bụ akara ngosi mmemme. Ọ bụ ma na 0V ma ọ bụ 10V na ọ dịghị ihe n'etiti. Ọ na-adabara na +10V, ma ọ bụ Elu mgbe enweghị ọrụ.
• Ihe omume na nke a bụ mgbe ọwa jikọtara ya ruru vol kacha alatage nke ọ na-aga. Igwe ọkụ ejikọtara na-agbanye mgbe ọ nweghị ihe na-eme. Nke a bụ ezigbo mgbama ịhọrọ maka Clocking ma ọ bụ ụdị Pulse LFO.

Ọpụpụ nrịbama ịdị n'otu (CH. 1 na 4)

• A na-enweta nsonaazụ ndị a ozugbo site na isi nke ọwa jikọtara. Ndị Attenuverter Channel anaghị emetụta ha.
• Itinye n'ime mmepụta a anaghị ewepụ akara ngosi na SUM na OR ụgbọ ala. Nke a bụ ezigbo mmepụta iji mgbe ị na-achọghị attenuation ma ọ bụ ntụgharị ma ọ bụ mgbe ịchọrọ iji akara ma n'adabereghị na n'ime ụgbọ ala SUM/OR.

MA ọ bụ pụọ

• Nke a bụ ihe si na sekit analọgụ OR. Ihe ntinye bụ CH. 1, 2, 3, na 4 Mpụta dị iche iche. Ọ na-arụpụta volta kacha elu mgbe niiletage si na voltages etinyere na ntinye. Ụfọdụ ndị mmadụ na-akpọ nke a Maximum Voltage selector sekit! Ndị attenuators na-enye ohere iji tụọ akara ngosi. Ọ naghị azaghachi voltages, yabụ enwere ike iji ya dozie mgbaama.
• Ọ bara uru maka imepụta ọdịiche na modulation ma ọ bụ izipu CV na ntinye na-anabata naanị voltag(dịka ọmụmaatụ, hazie ntinye CV na PHONOGENE).

Mkpokọta

• Nke a bụ nsonaazụ si sekit SUM analọg. Ihe ntinye bụ CH. 1, 2, 3, na 4 Mpụta dị iche iche. Dabere n'otu esi ahazi Attenuverters, ịnwere ike ịgbakwunye, tụgharịa, ma ọ bụ wepụ voltages si onye ọ bụla ọzọ na-eji nke a sekit.
• Nke a bụ ezigbo mmepụta iji maka ijikọta ọtụtụ akara njikwa iji mepụta modul dị mgbagwoju anya.

PỤTA

• Nke a bụ nsụgharị SUM atụgharịgharịrị. Ọ na-enye gị ohere ịmegharị azụ azụ!

NDỤMỌDỤ NA AGBỤGHỊ

• A na-enweta ogologo okirikiri ogologo site na iji akụkụ nzaghachi Logarithmic karịa. A na-arụ ọrụ kachasị ọsọ, dị nkọ site na oke nzaghachi nzaghachi Exponential.
• Mgbanwe na usoro nzaghachi na-emetụta oge Rise na Fall Times.
• Iji nweta ogologo oge ma ọ bụ mkpụmkpụ Rise na Fall Times karịa dị na njikwa panel, tinye voltage kwụsịrị na ntinye akara njikwa. Jiri CH. 2 ma ọ bụ 3 maka nkwụsị nke a voltage.
• Jiri mmepụta INV SUM ebe ịchọrọ mgbanwe mgbanwe mana enweghị ụzọ maka ntụgharị na ebe CV (Mix Input CV na ECHPHON, maka ex.ample).
• Ịnye mgbama tụgharịrị site na MATHS laghachi na MATHS na ntinye CV ọ bụla bara uru nke ukwuu maka ịmepụta nzaghachi nke njikwa nzaghachi Vari-Nzaghachi naanị kpuchiri ya.
• Mgbe ị na-eji SUM na ma ọ bụ mmepụta, tọọ CH ọ bụla ejighi ya. 2 ma ọ bụ 3 ruo 12:00 ma ọ bụ fanye eriri mkpọmkpọ ebe na ntinye akara ngosi nke ọwa jikọtara ka ịzenarị mmejọ achọghị.
• Ọ bụrụ na achọrọ ka CH hazie ma ọ bụ mepụta mgbama. 1, 4 bụ ma na SUM, INV, na OR bọs ma dị ka mmepụta onwe ya, jiri Mpụta Mgbama Unitydị n'otu, ebe ọ bụ na ọ naghị ahazi ya na SUM na OR Busses.
• MA ọ bụ mmepụta anaghị aza ma ọ bụ mepụta volta na-adịghị mmatages.
• Ọgwụgwụ nke Rise na Ọgwụgwụ nke okirikiri bara uru maka ịmepụta njikwa mgbagwoju anya voltage na-arụ ọrụ ebe CH. 1 na CH. 4 na-akpalite otu ibe. Iji mee nke a, kpachie EOR ma ọ bụ EOC na ntinye Trigger, Signal, na Cycle nke ọwa ndị ọzọ.

Mkpokọta echiche

Ụdị Voltage Ọrụ Triangle A na-achịkwa (Triangle LFO)

1. Tọọ CH.1 (ma ọ bụ 4) na okirikiri. Tọọ Rise na Fall Panel Control ka ehihie, Vari-Nzaghachi na Linear.
2. Tọọ CH.2 Attenuverter na 12:00.
3. Mechie mmepụta SUM na ntinye njikwa abụọ.
4. Nhọrọ, tinye modulation ugboro ọ bụla achọrọ na ntinye akara ngosi CH.3 wee jiri nwayọọ nwayọọ tụgharịa ihe ntanye ya na elekere.
5. Dịkwuo CH.2 Attenuverter ka ịgbanwe Frequency.
6. A na-ewepụta mmepụta site na Mgbama Ọwa nke jikọtara ya.
7. Ịtọ ntọala Rise na Fall n'ihu n'akụkụ elekere na-enye ogologo okirikiri. Ịtọ ntọala ndị a na-aga n'ihu na elekere elekere na-enye obere okirikiri, ruo ọnụego ọdịyo.
8. Enwere ike ịhazi ọrụ a na-esi na ya pụta site na nbibi na/ma ọ bụ ntụgharị site na Attenuverter jikọtara ya. N'aka nke ọzọ, wepụta nsonaazụ sitere na mmepụta UNITY Cycling Channel wee mechie nsonaazụ mgbanwe gaa na Rise ma ọ bụ Fall CV Input ka morph LFO na CH.1 (ma ọ bụ 4) Attenuverter.

Ụdị Voltage Controlled Ramp Ọrụ (Saw/Ramp LFO)

Otu dị ka nke dị n'elu, ọ bụ naanị oke Rise ka edobere n'ụzọ zuru oke na elekere elekere, atọrọ oke ọdịda ka ọ dịkarịa ala ehihie.

Voltage jikwaa Generator Transient arụrụ ọrụ (Mwakpo/Ọrịa EG)

• Ụkụ ma ọ bụ ọnụ ụzọ ámá etinyere na ntinye Trigger nke CH.1 ma ọ bụ 4 na-amalite ọrụ na-adịru nwa oge nke na-esi na 0V gaa na 10V n'ọnụego nke Rise parameter kpebisiri ike wee daa site na 10V ruo 0V n'ọnụego kpebiri site na paramita ọdịda.
• A na-emeghachi ọrụ a n'oge akụkụ ọdịda. Rise na Fall bụ nke nwere ike ịchịkwa afọ volt nke onwe ya, yana nzaghachi mgbanwe sitere na Log through Linear to Exponential, dị ka njikwa panel nzaghachi Vari-Response set.
• Enwere ike ịhazi ọrụ a na-esi na ya pụta site na attenuation na/ma ọ bụ ntụgharị site na Attenuverter.

VoltagOnye na-arụ ọrụ na-adịgide adịgide na-achịkwa (A/S/R EG)

• Ọnụ ụzọ ámá etinyere na ntinye aka Signal nke CH.1 ma ọ bụ 4 na-amalite ọrụ ahụ, nke na-esi na 0V gaa na ọkwa nke ọnụ ụzọ ámá etinyere, na ọnụ ọgụgụ nke Rise parameter kpebisiri ike, na-adịgide na ọkwa ahụ ruo mgbe mgbaàmà Gate kwụsịrị, wee daa site na ọkwa ahụ gaa na 0V na ọnụego kpebiri site na njedebe Fall.
• Bilie na ọdịda bụ onwe voltage nwere ike ịchịkwa, yana nzaghachi mgbanwe dị ka njikwa panel Vari-Re-sponse set.
• Enwere ike ịhazi ọrụ a na-esi na ya pụta site na nbibi na/ma ọ bụ ntụgharị site na Attenuverter.

Ihe nchọpụta kacha elu

1. A ga-achọpụta akara mgbape na CH. 1 Ntinye nrịbama.
2. Tọọ Bilie na daa na 3:00.
3. Wepụta mmepụta site na Mpụta Mgbaama. Ọnụ ụzọ ámá sitere na mmepụta EOR.

Voltage mirror

1. Tinye akara njikwa ka a ga-egosipụta na CH. 2 Ntinye nrịbama.
2. Tọọ CH. 2 Attenuverter na CCW zuru ezu.
3. Enweghị ihe ọ bụla etinyere na CH. 3 Ntinye nrịbama (iji wepụta nkwụsị), tọọ CH. 3 Attenuvert-er ruo CW zuru ezu.
4. Were mmepụta site na SUM mmepụta.

Ndozi Half Wave

1. Tinye mgbama bi-polar na CH. Ntinye 1, 2, 3, ma ọ bụ 4.
2. Were mmepụta site na OR mmepụta.
3. Buru n'uche nhazigharị nke ụgbọ ala OR.

Ụdị Voltage Pulse/elekere ejiri Voltage-agba ọsọ/Kwụsị (elekere, pulse LFO)

1. Otu dị ka Ụdị Voltage Ọrụ Triangle a na-achịkwa, naanị ihe a na-enweta site na EOC ma ọ bụ EOR.
2. Oke CH.1 Rise nke ọma na-edozi ugboro ole na CH.1 Fall parameter na-edozi obosara usu.
3. Na CH.4, ihe dị iche bụ eziokwu, ebe Rise na-edozi nke ọma obosara na ọdịda gbanwee ugboro ole.
4. Na ọwa abụọ ahụ, mgbanwe niile maka oke Rise na Fall na-emetụta ugboro ole.
5. Jiri ntinye CYCLE maka njikwa ọsọ/kwụsị.

Voltage Ihe nhazi oge igbu oge na-achịkwa

1. Tinye Trigger ma ọ bụ Ọnụ Ụzọ Ámá maka ntinye mkpali ma ọ bụrụ CH.1.
2. Were mmepụta si End Of Rise.
3. Oke ịrị elu na-edobe igbu oge yana oke ọdịda na-edozi obosara nke usu na-apụta.

Arcade Trill (LFO mgbagwoju anya)

1. Tọọ CH4 bilie na daa ruo ehihie, nzaghachi nye Exponential.
2. Mechie EOC na otutu, wee banye CH1 Trigger Input na ntinye CH2.
3. Gbanwee njikwa njikwa CH2 na 10:00.
4. Mechie CH2 mmepụta na ntinye CH1 BOTH.
5. Tọọ CH1 Rise na etiti ehihie, daa n'ụzọ zuru oke na elekere, nzaghachi na Linear.
6. Tinye aka na mgba ọkụ CH4 (CH1 ekwesịghị ịbụ ịgba ígwè).
7. Tinye Unity Output CH1 n'ebe a na-eme mgbanwe.
8. Dezie CH1 Rise panel akara maka mgbanwe (obere mgbanwe nwere mmetụta dị egwu na ụda).

Chaotic Trill (chọrọ MMG ma ọ bụ ihe nzacha LP Direct Coupled ọzọ)

1. Malite na mgbachi Arcade Trill.
2. Tọọ CH.1 Attenuverter na 1:00. Tinye ihe ngosi CH.1 na ntinye akara ngosi MMG DC.
3. Patch EOR ka MMG AC ntinye akara ngosi, tọọ na ọnọdụ LP, enweghị nzaghachi. Malite na Freq na elekere elekere zuru oke.
4. Tinye ihe ngosi MMG na MATHS CH.4 Ntinye abụọ ahụ.
5. Patch CH.4 Mpụta mgbanwe gaa na CH.1 Ntinye CV abụọ.
6. Mmepụta mgbaàmà ịdị n'otu na ebe mgbanwe mgbanwe.
7. MMG Freq na njikwa ntinye akara ngosi na MATHS CH1 na 4 Attenuverters nwere mmasị dị ukwuu na mgbakwunye na oke Rise na Fall.

Ụdị 281 (LFO mgbagwoju anya)

1. Na patch a, CH1 na CH4 na-arụ ọrụ na tandem iji nye ọrụ gbanwere site na ogo iri itoolu.
2. Na ma Cycle Switches na-etinye aka, kpachie Ọgwụgwụ RISE (CH1) na Trigger Inverter CH4.
3. Patch Ọgwụgwụ okirikiri (CH4) ka ọ bụrụ mkpali ntinye CH1.
4. Ọ bụrụ na ma CH1 na CH4 amaliteghị ịnya igwe, tinye CH1 Cycle obere oge.
5. Site n'ịgba ígwè chanel abụọ ahụ, tinye ihe nrịbama nke ha n'otu n'otu na ebe modulation abụọ dị iche iche, maka example, ọwa abụọ nke OPTOMIX.

Ụdị Voltage Envelopu ụdị ADSR na-achịkwa

1. Tinye mgbama ọnụ ụzọ na ntinye akara CH1.
2. Tọọ CH1 Attenuverter ka ọ na-erughị CW zuru oke.
3. Patch CH1 Ọgwụgwụ Rise gaa na ntinye CH4 na-akpalite.
4. Tọọ CH4 Attenuverter ka ọ bụrụ CW zuru oke.
5. Were mmepụta si na OR ụgbọ ala, jide n'aka na CH2 na CH3 ka edobere n'ehihie ma ọ bụrụ na ejighị ya.
6. Na patch a, CH1 na CH4 Rise na-achịkwa Oge Mwakpo. Maka ADSR na-ahụkarị, gbanwee paramita ndị a ka ọ yie (Ntọlite ​​​​CH1 Rise ka ọ dị ogologo karịa CH4 ma ọ bụ nke ọzọ, na-emepụta ọgụ abụọ.tages).
7. CH4 Fall paramita na-edozi ire ere stage nke envelopu.
8. CH1 Attenuverter na-edobe ọkwa Sustain nke ga-adị ala karịa otu oke ahụ na CH4.
9. N'ikpeazụ, CH1 Fall na-esetịpụ Oge Ntọhapụ.

Bọọlụ Bouncing, mbipụta 2013 - ekele maka Pete Speer

1. Tọọ CH1 Rise zuru CCW, daa na 3:00, nzaghachi na Linear.
2. Tọọ CH4 Bilie zuru oke na elekere elekere, daa na 11:00, nzaghachi na Linear.
3. Patch CH1 EOR ruo CH4 Cycle Ntinye, na CH1 mgbanwe mmepụta gaa na ntinye ọdịda CH4.
4. Mechie mmepụta CH4 gaa na ntinye njikwa VCA ma ọ bụ LPG.
5. Mechie isi iyi ọnụ ụzọ ámá ma ọ bụ kpalite (dị ka ọnụ ụzọ mmetụ aka site na isi ihe nrụgide) gaa na ntinye CH1 Trigger maka mmalite akwụkwọ ntuziaka nke “bounces.”
6. Hazie CH4 Rise na Fall maka ndịiche.

Contours nọọrọ onwe ya - ekele maka ndị Navs

Site n'ịgbanwe ọkwa na polarity nke mgbanwe mgbanwe nke CH1/4 na Attenuverter, na inye mgbama ahụ azụ na CH1/4 na Rise ma ọ bụ Fall Control Input, a na-enweta njikwa nnwere onwe nke mkpọda na-emekọrịta ihe. Wepụta nsonaazụ sitere na Mgbama Unity Unity. Kasị mma ka ịtọọ njikwa panel nzaghachi ka ehihie.

Mgbagwoju anya Mgbagwoju anya

• Otu dị ka nke dị n'elu, mana njikwa ọzọ ga-ekwe omume site na iji EOC ma ọ bụ EOR iji kpalite ọwa na-abụghị ma jiri SUM ma ọ bụ OR mmepụta na Rise, Fall, ma ọ bụ abụọ nke ọwa mbụ.
• Gbanwee Rise, Fall, Attenuversion, na usoro nzaghachi nke ọwa dị iche iche iji nweta ụdị dị iche iche.

Envelopu asymmetrical Trilling – ekele maka Walker Farrell

1. Tinye igwe kwụ otu ebe na CH1, ma ọ bụ tinye akara ngosi nke nhọrọ gị na ntinye ma ọ bụ ntinye akara ya.
2. Tọọ CH1 Rise na Daa na etiti ehihie jiri nzaghachi Linear.
3. Kwachie CH1 EOR gaa na ntinye okirikiri CH4.
4. Tọọ CH4 Rise na 1:00 wee daa ruo 11:00, yana nzaghachi nkọwa.
5. Were mmepụta site na OR (ya na CH2 na CH3 ka edobere n'ehihie).
6. Envelopu nke pụta nwere "trill" n'oge akụkụ ọdịda. Hazie ọkwa yana oge Bilie/ọdịda.
7. N'aka nke ọzọ, gbanwee ọwa wee jiri mmepụta EOC gaa na ntinye Cycle CH1 maka trilling n'oge oke ịrị elu.

Onye na-eso envelopu

1. Tinye mgbaama ka ị soro ya na ntinye Signal CH1 ma ọ bụ 4. Tọọ Rise na etiti ehihie.
2. Tọọ ma ọ bụ megharịa oge ọdịda iji nweta nzaghachi dị iche iche.
3. Wepụta nsonaazụ sitere na nsonaazụ ọwa ọwa metụtara maka nchọpụta kacha mma yana adịghị mma.
4. Were mmepụta site na OR ụgbọ ala mmepụta iji nweta ma ọ bụ ọrụ nke na-eso envelopu dị mma.

Voltage Comparator/Gate Extraction w/ variable obosara

1. Tinye mgbaama ka atụnyere ntinye akara ngosi CH3. Tọọ Attenuverter karịa 50%.
2. Jiri CH2 atụnyere voltage (na ma ọ bụ na-enweghị ihe patched).
3. Mechie mmepụta SUM gaa na ntinye akara CH1.
4. Tọọ CH1 Rise na Fall na CCW zuru ezu. Were ọnụ ụzọ ámá ewepụtara na EOR.
   • CH3 Attenuverter na-arụ ọrụ dị ka ntọala ọkwa ntinye, ụkpụrụ dị n'etiti ehihie na CW zuru ezu. CH2 na-arụ ọrụ dị ka ntọala ọnụ ụzọ ụkpụrụ sitere na CCW zuru ezu ruo 12:00.
   • Uru dị nso na 12:00 bụ ọnụ ụzọ ala. Ịtọlite ​​​​Rise ọzọ CW, ị nwere ike igbu oge Ọnụ Ụzọ Ámá ewepụtara.
   • Ịtọ ntọala ọdịda CW karịa na-agbanwe obosara nke Ọnụ Ụzọ Ámá ewepụtara. Jiri CH4 maka nvelopu Follower patch, yana CH3, 2 & 1 maka mmịpụta ọnụ ụzọ ámá, ma ị nwere usoro siri ike maka nhazi mgbaàmà mpụga.

Ndozi ebili mmiri zuru oke

1. Mgbama ọtụtụ ga-emezi ya na ntinye CH2 na 3.
2. CH2 Scaling/Nversion atọrọ na CW zuru oke, CH3 Scaling/Nversion atọrọ na CCW zuru oke.
3. Were mmepụta site na OR mmepụta. Gbanwee Scaling.

Mmụba

1. Tinye akara njikwa na-aga nke ọma ka amụba ya na ntinye akara ngosi CH1 ma ọ bụ 4. Tọọ Rise ka ọ bụrụ CW zuru oke, daa na CCW zuru oke.
2. Tinye akara ngosi njikwa na-aga nke ọma na ntinye njikwa BOTH.
3. Wepụta mmepụta site na nrụpụta mgbaàmà kwekọrọ.

Pseudo-VCA nwere mbelata - Thanx ruo Walker Farrell

1. Mechie mgbaama ọdịyo na CH1 na Rise and Fall na elekere elekere zuru oke, ma ọ bụ okirikiri CH1 na ọnụego ọdịyo.
2. Wepụ nsonaazụ sitere na SUM.
3. Tọọ ọkwa mbụ na njikwa CH1.
4. Tọọ njikwa njikwa CH2 zuru CW iji mepụta nkwụghachi 10V. Ọdịda ahụ na-amalite ibelata ma nwee ike ịgbachi nkịtị. Ọ bụrụ na a ka na-anụ ya, tinye mgbakwunye dị mma na njikwa CH3 ruo mgbe ọ gbachiri nkịtị.
5. Tọọ njikwa CH4 ka ọ bụrụ CCW zuru oke wee tinye envelopu na ntinye akara ma ọ bụ mepụta envelopu na CH4.
   • Nke a kwachie na-emepụta VCA nwere asymmetrical clipping na ebili mmiri. Ọ na-arụkwa ọrụ na CV, mana jide n'aka na ị gbanwee ntọala ntinye CV ka ị na-emeso nnukwu nkwụsị nke ntọala. Mwepụta INV nwere ike ịba uru karịa n'ọnọdụ ụfọdụ.

Voltage Nkesa elekere a na-achịkwa

• A na-ahazi akara elekere nke etinyere na Trigger Input CH1 ma ọ bụ 4 site na onye nkesa dị ka nke oke Rise kpara.
• Ịbawanye Rise na-eme ka onye nkewa dị elu, na-ebute nnukwu nkewa. Oge ọdịda na-edozi obosara nke elekere ga-apụta. Ọ bụrụ na edoziri obosara ka ọ dị ukwuu karịa ngụkọta oge nke nkewa, ihe nrụpụta na-anọgide "elu."

FLIP-FLOP (Nchekwa 1-Bit)

• N'ime patch a, Ntinye CH1 Trigger na-arụ ọrụ dị ka ntinye “Set”, yana ntinye njikwa CH1 BOTH na-arụkwa ọrụ dị ka ntinye “Tọgharia”.
  1. Tinye mgbama nrụpụta na CH1 BOTH Ntinye njikwa.
  2. Tinye ọnụ ụzọ ámá ma ọ bụ mgbama mgbagha na ntinye CH1 Trigger. Tọọ Rise ka ọ bụrụ CCW zuru oke, daa na CW zuru oke, Vari-Re-sponse to Linear.
  3. Were “Q” sitere na EOC. Mechie EOC ka CH4 Signal iji nweta “Ọ BỤGHỊ Q” na Mmepụta EOC.
• Ihe nkedo a nwere oke ebe nchekwa ihe dị ka nkeji 3, mgbe nke ahụ gasịrị, ọ na-echefu otu ihe ị gwara ya ka ọ cheta.

Ihe ntụgharị uche

• Tinye ọnụ ụzọ mgbagha na CH. 4 Ntinye nrịbama. Were nsonaazụ sitere na CH. 4 EOC.

Comparator/Ọnụ ụzọ amịpụta (ihe ọhụrụ)

1. Zipụ mgbaama ka atụnyere ntinye CH2.
2. Tọọ njikwa CH3 n'ime oke adịghị mma.
3. Mechie SUM n'ime ntinye akara ngosi CH1.
4. Tọọ CH1 Rise na daa na 0.
5. Were mmepụta sitere na CH1 EOR. Lelee polarity mgbaàmà na CH1 Unity LED. Mgbe mgbaàmà ahụ na-aga nke ọma, EOR na-eme njem.
6. Jiri njikwa CH3 iji tọọ ọnụ ụzọ. Ụfọdụ attenuation nke CH2 nwere ike ịdị mkpa iji chọta oke ziri ezi maka mgbama enyere.
7. Jiri njikwa ọdịda CH1 mee ka ọnụ ụzọ dị ogologo. Njikwa ịrị elu CH1 na-esetịpụ ogologo oge mgbama ga-adị n'elu ọnụ ụzọ iji mebie onye comparator.

OKWU MMADỤ

• Mee mkpọtụ na-akwado ngwaahịa a ka enweghị ntụpọ na akụrụngwa ma ọ bụ ihe owuwu otu afọ site na ụbọchị azụrụ (ihe akaebe nke ịzụrụ/akwụkwọ ọnụahịa achọrọ).
• Ọdịmma na-esi na ọkụ ọkụ na-ezighi ezi voltages, njikọ eriri ụgbọ ala eurorack azụ ma ọ bụ tụgharịa, iji ngwaahịa a eme ihe, iwepụ mkpịsị aka, mgbanwe ihu ihu, ma ọ bụ ihe ọ bụla ọzọ nke Mee Noise kpebiri na ọ bụ mmejọ nke onye ọrụ anaghị ekpuchi ya, yana ọnụego ọrụ nkịtị ga-etinye. .
• N'ime oge akwụkwọ ikike, a ga-edozi ma ọ bụ dochie ngwaahịa ọ bụla nwere nkwarụ, na nhọrọ nke Mee mkpọtụ, na nlọghachi na-eme mkpọtụ na onye ahịa na-akwụ ụgwọ njem iji mee mkpọtụ.
• Mee mkpọtụ na-egosi ma nabataghị ọrụ ọ bụla maka mmerụ ahụ mmadụ ma ọ bụ ngwa kpatara site na arụmọrụ ngwaahịa a.
• Biko kpọtụrụ teknụzụ@makenoisemusic.com na ajụjụ ọ bụla, Laghachi na ikike onye nrụpụta, ma ọ bụ mkpa & nkwupụta ọ bụla. http://www.makenoisemusic.com

Banyere akwụkwọ ntuziaka a:

• Tony Rolando dere
• Walker Farrell deziri ya
• W.Lee Coleman gosipụtara na Lewis Dahm okirikiri nhọrọ ukwuu nke Lewis Dahm gosipụtara
• DAALỤ
• Enyemaka imewe: Matthew Sherwood
• Beta Analyst: Walker Farrell
• Isiokwu ule: Joe Moresi, Pete Speer, Richard Devine

FAQ

• Ajụjụ: Enwere ike iji mgbakọ na mwepụ dijitalụ mee ihe?
  • A: Emebere MATHS maka iji analọgụ mana ọ nwere ike iji igwe synthesizers dijitalụ na-emekọrịta ihe site na akara ọnụ ụzọ ámá/elekere.
• Ajụjụ: Kedu otu m ga-esi mepụta mgbanwe nwa oge site na iji MAHS?
  • A: Ị nwere ike ịmepụta mgbanwe oge site na iji ọrụ envelopu na modulating voltages na ramp elu ma ọ bụ ala na tempo.
• Ajụjụ: Gịnị bụ ebumnuche ntinye okirikiri?
  • A: Ntinye okirikiri na-enye ohere maka voltage njikwa nke steeti Cycle na Channels 1 na 4, na-eme ka ịgba ígwè na-adabere na akara Gate.

Akwụkwọ / akụrụngwa

Mee mkpọtụ mgbakọ na mwepụ arụ ọrụ Generator Eurorack Module [pdf] Akwụkwọ ntuziaka Maths mgbagwoju arụ ọrụ Generator Eurorack Module, mgbakọ na mwepụ, Mgbagwoju arụrụ arụ Generator Eurorack Module, Ọrụ Generator Eurorack Module, Generator

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ