BL983313 EC
Tshebetso e Mini Controller
Buka ea Tataiso
EC Process Mini Controller Series
- BL983313
- BL983317
- BL983320
- BL983322
- BL983327
TDS Process Mini Controller Series
- BL983315
- BL983318
- BL983319
- BL983321
- BL983324
- BL983329
Moreki ea ratehang,
Kea leboha ha u khethile sehlahisoa sa Hanna Instruments ®.
Ka kopo bala bukana ena ea litaelo ka hloko pele u sebelisa sesebelisoa sena kaha se fana ka lintlha tse hlokahalang bakeng sa tšebeliso e nepahetseng ea sesebelisoa sena hammoho le maikutlo a nepahetseng a ho feto-fetoha ha sona.
Haeba o hloka lintlha tse ling tsa tekheniki, u seke oa tsilatsila ho re romella lengolo-tsoibila ho tech@hannainst.com.
Etela www.hannainst.com bakeng sa tlhaiso-leseling e batsi ka Hanna Instruments le lihlahisoa tsa rona.
Litokelo tsohle li bolokiloe. Ho haneloa ka botlalo kapa ka karolo e itseng ntle le tumello e ngotsoeng ea mong'a litokelo tsa molao,
Hanna Instruments Inc., Woonsocket, Rhode Island, 02895, USA.
Hanna Instruments e na le tokelo ea ho fetola moralo, kaho, kapa chebahalo ea lihlahisoa tsa eona ntle le tsebiso esale pele.
Tlhahlobo ea Pele
Tlosa sesebelisoa le lisebelisoa ka har'a sephutheloana 'me u se hlahlobe ka hloko.
Bakeng sa thuso e eketsehileng, ka kopo ikopanye le ofisi ea heno ea Hanna Instruments kapa re romelle lengolo-tsoibila ho tech@hannainst.com.
Sesebelisoa se seng le se seng se na le:
- Masakaneng a ho kenya
- Sekoaelo se pepeneneng
- Adapter ea matla ea 12 VDC (BL9833XX‑0 feela)
- Tataiso ea litšupiso e potlakileng e nang le setifikeiti sa boleng ba sesebelisoa
Hlokomela: Boloka lisebelisoa tsohle tsa ho paka ho fihlela u na le bonnete ba hore sesebelisoa se sebetsa hantle. Ntho efe kapa efe e senyehileng kapa e nang le bothata e tlameha ho khutlisoa e le thepa ea eona ea pele ea ho paka le lisebelisoa tse fanoeng.
TŠIRELETSO E KAKARETSO LE LIKELETSO TSA HO KENYA
Mekhoa le litaelo tse hlalositsoeng bukeng ena li ka hloka mehato e khethehileng ho netefatsa polokeho ea basebetsi.
Khokahano ea motlakase, ho kenya, ho qala, ts'ebetso le tlhokomelo li tlameha ho etsoa ke basebetsi ba khethehileng feela. Basebeletsi ba khethehileng ba tlameha hore ebe ba balile le ho utloisisa litaelo tse bukeng ena 'me ba lokela ho li latela.- Likhokahano tse ka sebelisoang ke basebelisi li ngotsoe ka ho hlaka karolong e ka morao.
Pele o kenya matla ho molaoli, netefatsa hore wiring e entsoe hantle.- Kamehla hakolla sesebelisoa motlakase ha o hokela motlakase.
- Ho tlameha ho kengoa sesebelisoa sa ho khaoha se tšoailoeng ka ho hlaka haufi le sesebelisoa ho netefatsa hore potoloho ea motlakase e feletsoe ke matla bakeng sa ts'ebeletso kapa tlhokomelo.
TLHALOSO E KAKARETSO LE TŠEBELETSO E REETSOENG
Hanna Instruments EC le TDS process conductivity mini controller series ke compact panel mount units tse etselitsoeng ho lekanya hantle conductivity ea electrolytic ea molapo oa ts'ebetso.
Setšoantšo sa BL9833XX-Y
| XX | 1 3 | 15 | 17 | 18 | 19 | 20 | 21 | 22 | 24 | 27 | 29 |
| Y | 0 (12 VDC) | 1 (115 kapa 230 VAC) | 2 (115 kapa 230 VAC, 4-20 mA tlhahiso) | ||||||||
Lisebelisoa tse reriloeng
Taolo ea boleng ba metsi a hlahisoang ho tsoa ho reverse osmosis, phapanyetsano ea ion, lits'ebetso tsa distillation, litora tse pholileng; taolo ea ts'ebetso ea metsi a mohloli, ho hlatsoa metsi, metsi a nooang, metsi a boiler, le lisebelisoa tse ling tsa indasteri, tse khethehileng tsa temo.
Likarolo tse ka Sehloohong
- Khetho ea ho khetha mokhoa oa ho noa ka letsoho kapa oa othomathiki
- Relay ea dosing e omileng, e sebetsang ha 'malo o le ka holimo/ka tlase ho sebaka se hlophisitsoeng (e itšetlehileng ka mohlala)
- Tekanyetso ea nako e fetang tekano, e emisa ho noa haeba setpoint e sa fihlellehe ka nako e behiloeng
- 4‑20 mA galvanic e ka thoko e hlahisoang e nang le lethal dose ea kantle e thibelang khokahano (BL9833XX-2 feela)
- Litekanyo tse lefelletsoeng ka mocheso ho tloha ho 5 ho isa ho 50 °C (41 ho isa ho 122 °F)
- Fuse e ka hare e sirelelitse mabitso a dosing
- LCD e kholo, e hlakileng le pontšo ea ts'ebetso ea LED
- Sekoaelo se pepeneneng se hananang le Splash
Litlhaloso tsa Molaoli
| B1983313 1 | B1983317 1 | B1983320 1 | B1983322 | BL983327 | 81983315 | 81983318 | 1319833191 | 81983321 | 181983324 | BL983329 | |
| Mofuta | EC | TDS | |||||||||
| s Yuniti | PS/01 | mS/cm | PS/cm | {6/cm | mS/cm | m9/1 (pR) | 9/1 Kgetho) | n19/1 4P41) | n19/1 (pR) | n19/1 (1)011) | n19/1 (ppm) |
| 1 Boholo | 0-1999 | 0.00-10.00 | 0.0-199.9 | 0.00 -19.99 | 0.00-10.00 | 0.0-199.9 | 0.00-10.00 | 0-1999 | 0.00-19.99 | 0.0 -49.9 | 0-999 |
| ” Qeto | 1 | 0.01 | 0.1 | 0.01 | 0.01 | 0.1 | 0.01 | 1 | 0.01 | 0.1 | 1 |
| * Ntho ea TDS | — | — | — | — | — | 0.5 | 0.5 | 0.65 | 0.5 | 0.5 | 0.5 |
| A «rnocy | -±2 % FS ho 25 °C (77 °F) | ||||||||||
| Matšeliso a mocheso | automatic , ho tloha 5 ho 50°C (41 ho 122 °F), le 0 = 2 W°C | ||||||||||
| Tekanyetso | bukana, e nang le trimmer ea collimation | ||||||||||
| Sephetho | galvanic e arohaneng le tlhahiso ea 4-20 mA; atrium ± 0.2 mA; 500 0 boholo ba mojaro (819833)0(2 feela) | ||||||||||
| Sebaka se feto-fetohang | covais tekanyo e fapaneng | ||||||||||
| Relay litekanyetso ha tekanyo ke |
> setpoint | < setpoint | > setpoint | < setpoint | > seta ntlha | ||||||
| Ke Dosing Contact | boholo ba 2 A (ts'ireletso ea fuse ea ka hare), 250 VAC o 30 VD ( | ||||||||||
| Ka mor'a nako e itseng | Relay ea dosing e emisitsoe haeba setpoint e sa kotuloa ka nako e behiloeng. Nako e ka fetoloa lipakeng tsa oprox. Metsotso e 5 ho isa ho e 30, kapa e holofalitsoe ke jumper. | ||||||||||
| Kenyelletso ea ho tima ka ntle | Ka tloaelo Bula: nolofalletsa/E koetsoe: thibela dosing (B19833XX-2 feela) | ||||||||||
| 12 VD( ° dopier | BL983313.0 | BL983317-0 | BL983320-0 | 8L983322-0 | BL983327-0 | BL983315.0 | BL983318.0 | BL983319-0 | 8L983321-0 | 8L9833240 | BL983329-0 |
| Eona - 115/230 VAC | 8L983313•1 | 8L983317-1 | 8L983320-1 | 8L983322-1 | 8L983327-1 | BL983315.1 | BL983318.1 | 8L983319-1 | 8L983321-1 | 8L983324-1 | 8L983329-1 |
| 115/230 VAC e nang le a. 4-20 mA tlhahiso | BL983313-2 | BL983317-2 | BL983320-2 | 8L983322-2 | 8L983327-2 | BL983315.2 | N/A | BL983319-2 | N/A | N/A | BL983329-2 |
| Kenyeletso | 10 VA bakeng sa 115/230 VAC, mehlala ea 50/60 Hz; 3 W bakeng sa mefuta e 12 ea VDC; fuse p E sebeditse; tlhomamiso sehlopha II. | ||||||||||
| g HI7632-00 | • | • | • | ||||||||
| ho HI7634-00 | • | • | • | • | • | • | • | • | |||
| Litekanyo | 83 x 53 x 92 mm (3.3 x 2.1 x 3.6″) | ||||||||||
| Boima ba 'mele | Mefuta e 12 ea VDC, 200 g (7.1 oz); 115/230 VAC mehlala 300 g (10.6 oz | ||||||||||
* E rekisoa ka thoko.
LEBAKA MATS'OANE
Li-probe tsa HI7632‑00 le HI7634-00 li rekisoa ka thoko.
| HI7632-00 | HI7634-00 | ||
| Mofuta | Lipalo tse peli Amperometric | • | |
| Sensor ea NTC | 4.7 KC) | • | – |
| 9.4 KC) | – | • | |
| Lisele kamehla | 1cm-' | • | |
| Lisebelisoa | 'mele oa PVC; Li-electrode tsa AN 316 | • | |
| Mocheso | 5 ho isa ho 50 °C (41 ho isa ho 122 °F) | • | |
| Khatello e kholo | 3 bar | • | |
| Bolelele ba lipatlisiso | 64 limilimithara (2.5″) | • | |
| Khokahano | 1/2 ″ khoele ea NPT | • | |
| Bolelele ba thapo | 2 m (6.6′) | • | |
| 4 m (13.1′) | – | • | |
| 5 limithara (16.41 | – | • | |
| _ 6 m (19.7″) | • | ||
Probe Dimension
Probe Wiring
Ho fihlella habonolo ho li-terminals tsa taolo ho etsa hore ho be le lithapo tse potlakileng.
Probe low voltaglikhokahano tsa e li entsoe ho terminal e nang le mebala e ka letsohong le letšehali.
Hlokomela: Lokisa probe pele ho tekanyo.
Tlhaloso ea Ts'ebetso
6.1. PELE PELE
- LCD
- Phetoho ea dosing
• TLOA (ho noa ha moriana ho koetsoe)
• KA HO ETSA HORE NA (automatic dosing, setpoint value)
• BUTSE (ho nosetsa ho butswe) - Senotlolo sa MEAS (mokhoa oa ho lekanya)
- SET key (lokisa boleng ba pontsho)
- SET trimmer (fetola boleng ba setpoint)
- CAL trimmer
- Letšoao la ts'ebetso ea LED
• Botala – mokgwa wa ho metha
• Orange-Yellow - ho noa ho sebetsa
• Bofubelu (ho panya) – boemo ba alamo
6.2. MOKHOA OA MORAO
- Probe connection terminal, low voltage likhokahano
- Terminal ea phepelo ea motlakase
• BL9833XX‑1 & BL9833XX‑2, molumo oa mohalataglikhokahano tsa e, 115/230 VAC
• BL9833XX‑0, molumo o tlasetaglikhokahano tsa e, 12 VDC - Ho ikopanya le relay ho sebetsa e le sesebelisoa sa ho tsamaisa sistimi ea dosing
- Jumper bakeng sa ho nolofalletsa (jumper e kentsoe) kapa ho tima (jumper e tlositsoe) taolo ea nako e eketsehileng
- Setha bakeng sa ho beha nako e eketsehileng (hoo e ka bang metsotso e 5 ho isa ho e 30)
- Taolo ea kantle ea ho thibela dosing system (BL9833XX-2)
- 4-20 mA mabitso a tsoang (BL9833XX-2)
KEKETSO
7.1. THUTO TABA
TEMOSO
Lithapo tsohle tse ka ntle tse hokahaneng le karolo e ka morao li lokela ho kenngoa li-cable lugs.
Sesepa sa ho khaoha se tšoailoeng ka ho hlaka (max. 6A) se tlameha ho kengoa haufi le sesebelisoa ho netefatsa hore potoloho ea motlakase e feletsoe ke matla bakeng sa ts'ebeletso kapa tlhokomelo.
7.2. KHOKANE LETHATA
Probe terminal
- Latela khoutu ea mebala ho hokela probe.
Phepelo ea motlakasel
- BL9833XX-0
Hokela lithapo tse 2 tsa adaptara ea motlakase ea 12 VDC ho +12 VDC le GND terminal.
- BL9833XX‑1 & BL9833XX-2
Hokela thapo ea motlakase ea 3-wire u ela hloko likhokahano tse nepahetseng: - lefatše (PE)
- ine (L), 115 VAC kapa 230 VAC
- ho se nke lehlakore (N1 bakeng sa 115 V kapa N2 bakeng sa 230 V)
Ho kopana le Dosing
- Dosing contact (NO) output drive drive dosing system joalo ka setpoint e hlophisitsoeng.
Karolo ea nako e eketsehileng (taolo ea sistimi)
- Tšobotsi ena e fanoe ka ho beha nako e telele e tsoelang pele eo relay e tsamaisang pompo kapa valve, ka ho lokisa sethatho (ho tloha ho hoo e ka bang metsotso e 5, ho ea ho hoo e ka bang.
Metsotso e 30 boholo).
- Ha nako e behiloeng e felile, litekanyetso li emisa, letšoao la ts'ebetso la LED le fetoha le lefubelu (ho panya), 'me molaetsa oa "TIMEOUT" oa hlaha. Ho tsoa, seta switch ea dosing ho TIMA ebe Auto.
- Tlosa jumper ho tloha karolong e ka morao ho thibela tšobotsi.
Hlokomela: Netefatsa hore switjha ya dosing (phanele e ka pele) e butswe ka Auto hore karolo ya Overtime e dumelle.
Khokahano e Thibelang kantle (NO)
- Ka tloaelo Bula: dosing e lumelletsoe.
- E koetsoe: dosing e emisa, letšoao la LED le fetoha le khubelu (ho panya) 'me molaetsa oa temoso oa "HALT" o hlahisoa.
Hlokomela: Haeba sesebelisoa sa dosing se BUTSE, ho noa ho ntse ho tsoela pele leha lebitso la kantle le thibelang le koetsoe.
MAHLOMOLA
Hanna® EC le TDS mini controller series li reretsoe ho sebelisoa ho laola mekhoa ea indasteri. Relays le White kapa Brown 50/60Hz; 10 VA Outputs e sebelisoa ho sebelisana le li-valve kapa lipompo ho lekola ts'ebetso.
TS'IRELETSO
- Haeba sesebelisoa se le maemong a ho metha, tobetsa konopo ea MEAS.
- Kenya probe ka tharollo ea calibration. Sheba tafole e ka tlase bakeng sa litharollo tse khothaletsoang tsa ho lekanya.
- Hlohlelletsa hakhutšoanyane 'me u lumelle ho bala ho tsitsisa.
- Fetola CAL trimmer ho fihlela LCD e bonts'a boleng bo fanoeng mona:
| Letoto | Tharollo ea Calibration | Bala Boleng | |
| EC | BL983313 | 1413 µS/cm (HI7031) | 1413 µS |
| BL983317 | 5.00 mS/cm (HI7039) | 5.00 mS | |
| BL983320 | 84 µS/cm (HI7033) | 84.0 µS | |
| BL983322 | tharollo ea tloaelo e ka bang 13 µS/cm kapa ho feta | EC boleng ba tharollo | |
| BL983327 | 5.00 mS/cm (HI7039) | 5.00 mS | |
| TDS | BL983315 | 84 µS/cm (HI7033) | 42.0 ppm |
| BL983318 | 6.44 ppt (HI7038) | 6.44 ppt | |
| BL983319 | 1413 µS/cm (HI7031) | 919 ppm | |
| BL983321 | tharollo ea tloaelo e ka bang 13 ppm kapa ho feta | TDS boleng ba tharollo | |
| BL983324 | 84 µS/cm (HI7033) | 42.0 ppm | |
| BL983329 | 1413 µS/cm (HI7031) | 706 ppm | |
8.2. SEBELO TIISETSO
Kakaretso: sebaka se behiloeng ke boleng ba threshold bo tla tsosa taolo haeba boleng ba tekanyo bo feta ho eona.
- Tobetsa konopo ea SET. LCD e bonts'a boleng ba kamehla kapa bo hlophisitsoeng pele hammoho le "SET" tag.
- Sebelisa screwdriver e nyane ho lokisa trimmer ea SET ho boleng bo lakatsehang ba setpoint.
- Ka mor'a metsotso e 1 sesebelisoa se tsosolosa mokhoa oa ho lekanya. Haeba ho se joalo, tobetsa konopo ea MEAS.
Hlokomela: Setulo se na le boleng bo tloaelehileng ba hysteresis bo bapisoang le ho nepahala ha sesebelisoa.
8.3. TLHOKOMELO
Mekhoa e metle
- Etsa bonnete ba hore wiring e etsoa ka nepo.
- Netefatsa hore boleng ba setpoint bo hlophisitsoe hantle.
- Netefatsa hore probe calibration.
- Khetha mokhoa oa ho noa.
Tsamaiso
- Kenya (kapa kenya) probe tharollong e lokelang ho beoa leihlo.
- Tobetsa konopo ea MEAS (haeba ho hlokahala). LCD e bonts'a boleng bo lekantsoeng.
• Letšoao la LED le bonesa Botala bo bontšang hore sesebelisoa se boemong ba ho metha 'me dosing ha e sebetse.
• Letšoao la LED le bonesa Orange/Yellow le bonts'a litekanyetso tse ntseng li tsoela pele.
8.4. LEKAKA TSAMAISO
Ho hloekisa khafetsa le ho boloka polokelo e nepahetseng ke tsela e molemohali ea ho ntlafatsa bophelo ba probe.
- Kenya ntlha ea patlisiso ho HI7061 Cleaning Solution bakeng sa hora e le 'ngoe.
- Haeba ho hlokahala hore ho hloekisoe ka ho feletseng, borashe lithakhisa tsa tšepe ka sandpaper e ntle haholo.
- Ka mor'a ho hloekisa, hlatsoa probe ka metsi a pompo 'me u tsosolose mithara.
- Boloka probe e hloekile ebile e omme.
LIEKETSENG
| Likhoutu tsa ho Odara | Tlhaloso |
| HI7632-00 | EC/TDS probe bakeng sa lilaoli tse nyane tse fapaneng tse nang le thapo ea 2 m (6.6'). |
| HI7632-00/6 | EC/TDS probe bakeng sa lilaoli tse nyane tse fapaneng tse nang le thapo ea 6 m (19.7'). |
| HI7634-00 | EC/TDS probe bakeng sa li-mini controller tse tlase tse nang le thapo ea 2 m (6.6'). |
| HI7634-00/4 | EC/TDS probe bakeng sa li-mini controller tse tlase tse nang le thapo ea 4 m (13.1'). |
| HI7634-00/5 | EC/TDS probe bakeng sa li-mini controller tse tlase tse nang le thapo ea 5 m (16.4'). |
| HI70031P | 1413 µS/cm tharollo e tloaelehileng ea conductivity, 20 mL sachet (25 pcs.) |
| HI7031M | 1413 µS/cm tharollo e tloaelehileng ea conductivity, 230 mL |
| HI7031L | 1413 µS/cm tharollo e tloaelehileng ea conductivity, 500 mL |
| HI7033M | 84 µS/cm tharollo e tloaelehileng ea conductivity, 230 mL |
| HI7033L | 84 µS/cm tharollo e tloaelehileng ea conductivity, 500 mL |
| HI70038P | 6.44 g/L (ppt) TDS tharollo e tloaelehileng, 20 mL sachet (25 pcs.) |
| HI70039P | 5000 µS/cm tharollo e tloaelehileng ea conductivity, 20 mL sachet (25 pcs.) |
| HI7039M | 5000 µS/cm tharollo e tloaelehileng ea conductivity, 250 mL |
| HI7039L | 5000 µS/cm tharollo e tloaelehileng ea conductivity, 500 mL |
| HI7061M | Tharollo ea ho hloekisa bakeng sa tšebeliso e akaretsang, 230 ml |
| HI7061L | Tharollo ea ho hloekisa bakeng sa tšebeliso e akaretsang, 500 ml |
| HI710005 | Adapter ea matla, 115 VAC ho isa ho 12 VDC, polaka ea US |
| HI710006 | Adapter ea matla, 230 VAC ho 12 VDC, plug ea Europe |
| HI710012 | Adapter ea matla, 230 VAC ho isa ho 12 VDC, polaka ea UK |
| HI731326 | Screwdriver ea Calibration (li-pcs tse 20) |
| HI740146 | Li-brackets tse hloekisitsoeng (2 li-pcs.) |
TIISETSO
Lisebelisoa tsohle tsa Hanna® li lumellana le CE European Directives.
Ho lahloa ha Thepa ea Motlakase le ea Elektronike. Sehlahisoa ha sea lokela ho nkoa e le litšila tsa ntlo. Ho e-na le hoo, nehelana ka eona sebakeng se loketseng sa pokello bakeng sa ho sebelisoa bocha ha lisebelisoa tsa motlakase le tsa elektroniki, tse tla baballa mehloli ea tlhaho.
Ho netefatsa hore sehlahisoa se lahloa ka nepo ho thibela litlamorao tse ka bang mpe ho tikoloho le bophelo ba batho. Ho fumana lintlha tse ling, ikopanye le toropo ea heno, litšebeletso tsa ho lahlela lithōle tsa lehae la heno, kapa sebaka seo u rekelang ho sona.
LIKELETSO MOSEBETSI
Pele o sebelisa sesebelisoa sena, etsa bonnete ba hore se loketse ka botlalo ts'ebeliso ea hau e ikhethileng le tikolohong eo se sebelisoang ho eona. Phapang efe kapa efe e hlahisoang ke mosebelisi ho sesebelisoa se fanoeng e ka theola tšebetso ea sesebelisoa.
Bakeng sa polokeho ea hau le ea sesebelisoa u se ke ua sebelisa kapa ua boloka sesebelisoa libakeng tse kotsi.
TIISETSO
Li-mini controller li na le tiisetso ea nako ea lilemo tse peli khahlanong le bofokoli mosebetsing le thepa ha li sebelisetsoa morero oa tsona 'me li hlokomeloa ho latela litaelo. Tiisetso ena e lekanyelitsoe ho lokisoa kapa ho e nchafatsa mahala. Tšenyo ka lebaka la likotsi, tšebeliso e mpe, tampring, kapa khaello ea tlhokomelo e behiloeng ha e koaheloe. Haeba tšebeletso e hlokahala, ikopanye le ofisi ea heno ea Hanna Instruments®.
Haeba u le tlas'a tiisetso, tlaleha nomoro ea mohlala, letsatsi la theko, nomoro ea serial le mofuta oa bothata. Haeba tokiso e sa koaheloe ke waranti, u tla tsebisoa ka liqoso tse entsoeng. Haeba sesebelisoa se tla khutlisetsoa ofising ea Hanna Instruments,
qala ka ho fumana nomoro ea Returned Goods Authorization (RGA) ho tsoa lefapheng la Technical Service ebe u e romela le litšenyehelo tsa thomello li lefshoe esale pele. Ha u romella sesebelisoa leha e le sefe, etsa bonnete ba hore se phuthetsoe hantle bakeng sa tšireletso e feletseng.
MANBL983313 09/22
Litokomane / Lisebelisoa
 |
HANNA lisebelisoa BL983313 EC Process Mini Controller [pdf] Buka ea Taelo BL983313, BL983317, BL983320, BL983322, BL983327, BL983313 EC Process Mini Controller, EC Process Mini Controller, Processor Mini Controller, Mini Controller, Controller |
