Bukana ea Mosebelisi
GT-223F Digital Output Module
16 ch, 24 VDC, 0.3 A, sink, tšireletso e seng khutšoanyane ea potoloho, 10 pt removable terminal
Lethathamo la boitsebiso: 76439
2025-02-20
Copyright © 2025 Beijer Electronics AB. Litokelo tsohle li sirelelitsoe.
Lintlha tse tokomaneng ena li ka fetoha ntle le tsebiso mme li fanoa joalo ka ha li fumaneha ka nako ea khatiso. Beijer Electronics AB e na le tokelo ea ho fetola tlhahisoleseding leha e le efe ntle le ho ntlafatsa khatiso ena. Beijer Electronics AB ha e nke boikarabello bakeng sa liphoso leha e le life tse ka hlahang tokomaneng ena. Tsohle exampLes tokomaneng ena e reretsoe feela ho ntlafatsa kutloisiso ea ts'ebetso le ts'ebetso ea lisebelisoa. Beijer Electronics AB e ke ke ea nka boikarabelo leha e le bofe haeba tsena e le tsa peleamples li sebelisoa lits'ebetsong tsa 'nete. Ho view mabapi le mefuta e mengata ea lits'ebetso tsa software ena, basebelisi ba tlameha ho fumana tsebo e lekaneng ka bobona ho netefatsa hore e sebelisoa ka nepo ts'ebelisong ea bona e ikhethileng. Batho ba ikarabellang bakeng sa kopo le lisebelisoa ba tlameha ho netefatsa hore kopo e 'ngoe le e 'ngoe e tsamaellana le litlhoko tsohle tse amehang, litekanyetso le melao mabapi le tlhophiso le polokeho. Beijer Electronics AB e ke ke ea amohela boikarabello bakeng sa tšenyo leha e le efe e etsahetseng nakong ea ho kenya kapa ho sebelisoa thepa e boletsoeng tokomaneng ena. Beijer Electronics AB e thibela liphetoho tsohle, liphetoho, kapa phetolo ea lisebelisoa.
Ntlo-kholo
Beijer Electronics AB
Lebokose la 426
201 24 Malmö, Sweden
www.beijerelectronics.com / +46 40 358600
1. Mabapi le Bukana ena
Bukana ena e na le tlhahisoleseding e mabapi le software le likarolo tsa hardware tsa Beijer Electronics GT-223F Digital Output Module. E fana ka litlhaloso tse tebileng, tataiso mabapi le ho kenya, ho seta, le tšebeliso ea sehlahisoa.
1.1. Matshwao a Sebedisitsweng Bukaneng ena
Sengoliloeng sena se kenyelletsa Temoso, Tlhokomeliso, Tlhokomeliso le matšoao a Bohlokoa moo ho loketseng, ho supa lintlha tse amanang le polokeho, kapa lintlha tse ling tsa bohlokoa. Matšoao a tšoanang a lokela ho hlalosoa ka tsela e latelang:
TLHOKOMELO
Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe, le tšenyo e kholo sehlahisoa.
TLHOKOMELO
Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng, le tšenyo e itekanetseng sehlahisoa.
HLOKOMELA
Letšoao la Note le hlokomelisa 'mali ka lintlha le maemo a amehang.
BOHLOKOA
Letšoao la Bohlokoa le totobatsa lintlha tsa bohlokoa.
2. Tšireletseho
Pele o sebelisa sehlahisoa sena, ka kopo bala bukana ena le libuka tse ling tse amehang ka hloko. Ela hloko ka botlalo litaelo tsa polokeho!
Leha ho le joalo, Beijer Electronics e ke ke ea ikarabella kapa ea ikarabella bakeng sa tšenyo e bakiloeng ke tšebeliso ea sehlahisoa sena.
Litšoantšo, mohlalaampLits'oants'o le litšoantšo bukeng ena li kenyelelitsoe molemong oa ho etsa litšoantšo. Ka lebaka la mefuta e mengata e fapaneng le litlhoko tse amanang le ts'ebetso efe kapa efe e itseng, Beijer Electronics e ke ke ea nka boikarabello kapa boikarabello bakeng sa ts'ebeliso ea 'nete e ipapisitseng le maemo a khale.amples le litšoantšo.
2.1. Setifikeiti sa Sehlahisoa
Sehlahisoa se na le litifikeiti tse latelang tsa sehlahisoa.
2.2. Litlhokahalo tse akaretsang tsa polokeho
TLHOKOMELO
- U se ke ua kopanya lihlahisoa le lithapo ka matla a hokahaneng le sistimi. Ho etsa joalo ho baka "arc flash", e ka fellang ka liketsahalo tse kotsi tse sa lebelloang (ho chesa, mollo, lintho tse fofang, khatello ea ho phatloha, ho phatloha ha molumo, mocheso).
- Se ke oa ama li-terminal blocks kapa li-module tsa IO ha sistimi e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane kapa ho se sebetse hantle ha sesebelisoa.
- Le ka mohla u se ke ua lumella lintho tsa tšepe tse ka ntle ho ama sehlahisoa ha tsamaiso e ntse e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane kapa ho se sebetse hantle ha sesebelisoa.
- U se ke ua beha sehlahisoa haufi le thepa e tukang. Ho etsa joalo ho ka baka mollo.
- Mosebetsi oohle oa lithapo o lokela ho etsoa ke moenjiniere oa motlakase.
- Ha u sebetsana le li-module, etsa bonnete ba hore batho bohle, sebaka sa mosebetsi le ho paka li thehiloe hantle. Qoba ho ama likarolo tsa conductive, li-module li na le likarolo tsa elektronike tse ka 'nang tsa senngoa ke ho tsoa ha electrostatic.
TLHOKOMELO
- Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mocheso o fetang 60. Qoba ho beha sehlahisoa letsatsing le tobileng.
- Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mongobo o fetang 90%.
- Kamehla sebelisa sehlahisoa libakeng tse nang le tekanyo ea 1 kapa 2 ea tšilafalo.
- Sebelisa likhoele tse tloaelehileng bakeng sa likhoele.
3. Mabapi le Tsamaiso ea G-Series
- Sesebelisoa sa Configuration / Soft PLC / Master
- Mosebelisi
- Khokahano ea Marang-rang/Seriale
- processor module
- Katoloso Module Interface
- Protocol ea Melaetsa ea Tšebeletso
- Katoloso Mojule
- Network Adapter Module
Sistimi e felileview
- Network Adapter Module - Mojule oa adaptara ea marang-rang o theha sehokelo lipakeng tsa bese ea tšimo le lisebelisoa tsa masimong tse nang le li-module tsa katoloso. Khokahano ho litsamaiso tse fapaneng tsa libese tsa masimong e ka theoa ke mojule o mong le o mong o tsamaellanang oa adaptara ea netweke, mohlala, bakeng sa MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Serial joalo-joalo.
- Katoloso Mojule - Mefuta ea li-module tsa katoloso: Digital IO, Analog IO, le li-module tse khethehileng.
- Ho romella melaetsa - Sistimi e sebelisa mefuta e 'meli ea melaetsa: Melaetsa ea litšebeletso le melaetsa ea IO.
3.1. Mokhoa oa ho etsa 'mapa oa data oa IO
Mojule oa katoloso o na le mefuta e meraro ea data: data ea IO, paramethara ea tlhophiso, le ngoliso ea memori. Phapanyetsano ea data pakeng tsa adaptara ea marang-rang le li-module tsa ho atolosa li etsoa ka data ea setšoantšo sa IO ka protocol ea ka hare.
- Adapter ea netweke
- Katoloso ea Modules
Phallo ea data lipakeng tsa adaptara ea marang-rang (li-slots tse 63) le li-module tsa katoloso
Lintlha tsa setšoantšo le se hlahisoang li itšetlehile ka sebaka sa slot le mofuta oa data oa slot ea ho atolosa. Ho hlophisoa ha data ea setšoantšo sa ho kenya le ho tsoa ho ipapisitse le boemo ba sekotjana sa katoloso. Lipalo tsa tlhophiso ena li kenyelelitsoe libukeng tsa adaptara ea marang-rang le li-module tsa IO tse ka khonehang.
Lintlha tse sebetsang tsa parameter li ipapisitse le li-module tse sebelisoang. Bakeng sa mohlalaample, li-module tsa analoge li na le li-setting tsa 0-20 mA kapa 4-20 mA, 'me li-module tsa mocheso li na le li-setting tse kang PT100, PT200, le PT500. Litokomane tsa module ka 'ngoe li fana ka tlhaloso ea data ea parameter.
4. Litlhaloso
4.1. Litlhaloso tsa Tikoloho
| Mocheso oa ho sebetsa | -20°C – 60°C |
| UL mocheso | -20°C – 60°C |
| Mocheso oa polokelo | -40°C – 85°C |
| Mongobo o amanang | 5% - 90% e sa lumellaneng |
| Ho phahamisa | DIN seporo |
| Ts'ebetso ea ts'oenyeho | IEC 60068-2-27 (15G) |
| Khanyetso ea ho thothomela | IEC 60068-2-6 (4 g) |
| Likhase tsa indasteri | EN 61000-6-4: 2019 |
| Tšireletso ea indasteri | EN 61000-6-2: 2019 |
| Boemo ba ho kenya | E otlolohileng le e tshekaletseng |
| Setifikeiti sa lihlahisoa | CE, FCC, UL, cUL |
4.2. Litlhaloso tse akaretsang
| Ho felloa ke matla | Max. 50 mA @ 5 VDC |
| Ho behwa ka thoko | I/O ho Logic: ho itšehla thajana ha photocoupler Matla a masimong: ho se itšehla thajana |
| UL matla a tšimo | Phepelo voltage: 24 VDC lebitso, Sehlopha sa 2 |
| Matla a tšimo | Phepelo voltage: 24 VDC lebitso Moqtagmefuta e fapaneng: 15-30 VDC Phallo ea matla: 10 mA @ 24 VDC |
| Wiring | Sehokedi sa module: I/O cable max. 2.0 mm² (AWG 14) |
| Boima ba 'mele | 53 g |
| Boholo ba module | 12 mm x 99 mm x 70 mm |
4.2.1. Litekanyo
Litekanyo tsa module (mm)
4.3. Litlhaloso tsa Sephetho
| Sephetho ka mojule | Lintlha tse 16 tsa mofuta oa sink |
| Lipontšo | 16 boemo ba tlhahiso e tala |
| Sephetho voltage fapaneng | 24 VDC lebitso 15 VDC – 30 VDC @ 60 ℃ |
| Boemong ba naha voltaglerotholi | 0.5 VDC @ 0.3 A |
| Mots. jwale | Min. 1 mA |
| Off-state leakage current | Max. 2A |
| Ho lieha ho tsoa | TIMA ho ON: Max. 0.2 ms HO TSEBA: Max 0.4 ms |
| Lintlha tse hlahisoang hajoale | Max. 0.3 A mocha ka mong / Max. 4.8 A yuniti ka 'ngoe |
| Tshireletso* | Ha ho letho |
| Mofuta o tloaelehileng | Lintlha tse 16 / 2 COM |
* Sheba khaolo ea Tataiso ea Wiring.
5. Setšoantšo sa Wiring
- Matla a Sisteme (5V)
- Matla a Sisteme (GND)
- Letšoao la G-Bus
- Matla a Tšimong (0Vdc)
- Matla a Tšimong (24Vdc)
- Mabitso a Matla a Tšimo
- Mabitso a G-Bus
Sehokelo sa I/O le Wiring Power Mosebelisi ke motho ka mong
| Tšoaea no. | Tlhaloso ea lets'oao |
| 0 | Kanale ea tlhahiso 0 |
| 1 | Kanale ea tlhahiso 1 |
| 2 | Kanale ea tlhahiso 2 |
| 3 | Kanale ea tlhahiso 3 |
| 4 | Kanale ea tlhahiso 4 |
| 5 | Kanale ea tlhahiso 5 |
| 6 | Kanale ea tlhahiso 6 |
| 7 | Kanale ea tlhahiso 7 |
| 8 | Kanale ea tlhahiso 8 |
| 9 | Kanale ea tlhahiso 9 |
| 10 | Kanale ea tlhahiso 10 |
| 11 | Kanale ea tlhahiso 11 |
| 12 | Kanale ea tlhahiso 12 |
| 13 | Kanale ea tlhahiso 13 |
| 14 | Kanale ea tlhahiso 14 |
| 15 | Kanale ea tlhahiso 15 |
| 16 | Tloaelehileng (Matla a Tšimo 0 V) |
| 17 | Tloaelehileng (Matla a Tšimo 0 V) |
| 18 | Tloaelehileng (Matla a Tšimo 24 V) |
| 19 | Tloaelehileng (Matla a Tšimo 24 V) |
6. Letšoao la LED
| Nomoro ea LED. | LED mosebetsi / tlhaloso | Mmala oa LED |
| 0 | Kanale ea tlhahiso 0 | Botala |
| 1 | Kanale ea tlhahiso 1 | Botala |
| 2 | Kanale ea tlhahiso 2 | Botala |
| 3 | Kanale ea tlhahiso 3 | Botala |
| 4 | Kanale ea tlhahiso 4 | Botala |
| 5 | Kanale ea tlhahiso 5 | Botala |
| 6 | Kanale ea tlhahiso 6 | Botala |
| 7 | Kanale ea tlhahiso 7 | Botala |
| 8 | Kanale ea tlhahiso 8 | Botala |
| 9 | Kanale ea tlhahiso 9 | Botala |
| 10 | Kanale ea tlhahiso 10 | Botala |
| 11 | Kanale ea tlhahiso 11 | Botala |
| 12 | Kanale ea tlhahiso 12 | Botala |
| 13 | Kanale ea tlhahiso 13 | Botala |
| 14 | Kanale ea tlhahiso 14 | Botala |
| 15 | Kanale ea tlhahiso 15 | Botala |
Boemo ba Channel
| Boemo | LED | E supa |
| Eseng pontšo | E tima | Ts'ebetso e tloaelehileng |
| Ka pontsho | Botala | Ts'ebetso e tloaelehileng |
7. Ho Etsa 'Mapa oa Lintlha ka Boleng ba Litšoantšo
Boleng ba setšoantšo se hlahisoang
| Nonyana e nyane. | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| Byte 0 | D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
| Byte 1 | D15 | D14 | D13 | D12 | D11 | D10 | D9 | D8 |
Lintlha tsa Mojule oa Output
| D7 | D6 | D5 | D4 | D3 | D2 | D1 | D0 |
| D15 | D14 | D13 | D12 | D11 | D10 | D9 | D8 |
8. Lintlha tsa Parameter
Bolelele bo nepahetseng ba parametha: 4 Byte
| Nonyana e nyane. | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| Byte 0 | Ketso ea phoso (ch0-ch7) 0: Boleng ba phoso, 1: Tšoara boemo ba ho qetela |
|||||||
| Byte 1 | Ketso ea phoso (ch8-ch15) 0: Boleng ba phoso, 1: Tšoara boemo ba ho qetela |
|||||||
| Byte 2 | Boleng ba phoso (ch0-ch7) 0: E timme, 1: Bulela |
|||||||
| Byte 3 | Boleng ba phoso (ch8-ch15) 0: E timme, 1: Bulela |
|||||||
9. Setupo sa Hardware
TLHOKOMELO
- Bala khaolo ena kamehla pele o kenya module!
- Sebaka se chesang! Bokaholimo ba ntlo bo ka chesa nakong ea ts'ebetso. Haeba sesebelisoa se sebelisoa mochesong o phahameng oa tikoloho, kamehla tlohela sesebelisoa hore se phomole pele u se tšoara.
- Ho sebetsa ka lisebelisoa tse matlafalitsoeng ho ka senya thepa! Kamehla tima motlakase pele o sebetsa sesebelisoa.
9.1. Litlhoko tsa Sebaka
Litšoantšo tse latelang li bontša litlhoko tsa sebaka ha u kenya li-module tsa G-Series. Sekheo se theha sebaka sa moea, 'me se thibela tšitiso ea motlakase ho susumetsa ts'ebetso. Boemo ba ho kenya bo nepahetse bo otlolohile ebile bo rapame. Litšoantšo li na le litšoantšo 'me li ka 'na tsa se ke tsa lekana.
TLHOKOMELO
HO SE latele ditlhoko tsa sebaka ho ka baka ho senya sehlahisoa.
Litlhoko tsa sebaka se otlolohileng le se tšekaletseng
Sebaka se hlokahalang ho ea monyako
9.2. Mount Module ho DIN Rail
Likhaolo tse latelang li hlalosa mokhoa oa ho kenya mojule seporong sa DIN.
TLHOKOMELO
Mojule o tlameha ho ts'oaroa ho seporo sa DIN ka lithapo tsa ho notlela.
9.2.1. Thaba ea GL-9XXX kapa GT-XXXX Module
Litaelo tse latelang li sebetsa mefuteng ena ea li-module:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
GN-9XXX li-module li na le li-levers tse tharo tsa ho notlela, e 'ngoe e le ka tlase le tse peli ka lehlakoreng. Bakeng sa litaelo tsa ho holisa, sheba Mount GN-9XXX Module.
Namela seporong sa DIN
- Kenya
- Notlela
Theoha ho tloha seporong sa DIN
- Notlolla
- Hula ka ntle
9.2.2. Thaba ea GN-9XXX Module
Ho palamisa kapa ho theolaadaptara ea etwork kapa IO e lokiselitsoeng mojule ka lebitso la sehlahisoa GN-9XXX, bakeng sa mohlalaample GN-9251 kapa GN-9371, bona litaelo tse latelang:
Namela seporong sa DIN
Theoha ho tloha seporong sa DIN
9.3. Tataiso ea Wiring
TLHOKOMELO
Sheba boholo ba tlhahiso ea hona joale ea module ea 1/0. Likarolo li ka senyeha!
Se ke oa hokela ho kenya letsoho le likhoele tsa 24V ntle le mojaro. Likarolo li ka senyeha!
9.4. Matla a Tšimo le Lithako tsa Lintlha
Puisano pakeng tsa adaptara ea marang-rang ea G-Series le module ea ho atolosa, hammoho le tsamaiso / matla a tšimo ea li-module tsa libese li etsoa ka bese ea ka hare. E entsoe ka 2 Lithako tsa Matla a Tšimo le 6 Lithako tsa data.
TLHOKOMELO
Se ke oa ama lintlha le lithakhisa tsa matla a tšimo! Ho ama ho ka fella ka ho silafatsoa le ho senyeha ka lerata la ESD.
- Lithako tsa Matla a Tšimo
- Lintlha tsa Pin
| Tšoaea no. | Lebitso | Tlhaloso |
| P1 | Sistimi ea VCC | Phepelo ea sistimi voltage (5 VDC) |
| P2 | Sistimi ea GND | Sebaka sa tsamaiso |
| P3 | Sephetho sa token | Boema-kepe ba token ea module ea processor |
| P4 | Tlhahiso ea serial | Transmitter port port ea module ea processor |
| P5 | Tlhahiso ea serial | Boema-kepe ba ho amohela mojule oa processor |
| P6 | Reserved | E boloketsoe token ea bypass |
| P7 | Tšimong GND | Sebaka sa tšimo |
| P8 | Sebaka sa VCC | Phepelo ea masimong voltage (24 VDC) |
2025-02 Beijer Electronics, Doc ID: 76439
Litokomane / Lisebelisoa
 |
Beijer ELECTRONICS GT-223F Digital Output Module [pdf] Bukana ea Mosebelisi GT-223F, GT-223F Digital Output Module, Digital Output Module, Output Module, Mojule |
