USB-3101
USB-based Analog Output
Bhuku reMushandisi
Mbudzi 2017. Rev 4
© Measurement Computing Corporation
3101 USB Yakavakirwa Analog Output
Trademark uye Copyright Information
Measurement Computing Corporation, InstaCal, Universal Raibhurari, uye Measurement Computing logo angave maredhiyo kana mamakisi akanyoreswa eMeasurement Computing Corporation. Tarisa kune iyo Copyrights & Trademarks chikamu pa mccdaq.com/legal kuti uwane rumwe ruzivo nezve Measurement Computing trademarks.
Zvimwe zvigadzirwa nemazita emakambani ataurwa pano zviratidzo kana mazita ekutengeserana emakambani avo.
© 2017 Measurement Computing Corporation. Kodzero dzese dzakachengetwa. Hapana chikamu chebhuku rino chinogona kutsikiswa, kuchengetwa muchirongwa chekutoresa, kana kufambiswa, nenzira ipi neipi, zvemagetsi, zvemuchina, nekukopa, kurekodha, kana neimwe nzira pasina mvumo yakanyorwa yeMeasurement Computing Corporation.
Cherechedzai
Measurement Computing Corporation haitenderi chero chigadzirwa cheMeasurement Computing Corporation kuti chishandiswe mumasisitimu ekutsigira hupenyu uye / kana zvishandiso pasina mvumo yakanyorwa yakanyorwa kubva kuMeasurement Computing Corporation. Zvishandiso / masisitimu ekutsigira hupenyu zvigadziriso kana masisitimu ayo, a) anoitirwa kuvhiyiwa kuiswa mumuviri, kana b) tsigiro kana kuchengetedza hupenyu uye kutadza kuita kunogona kutarisirwa zvine musoro kuguma nekukuvara. Measurement Computing Corporation zvigadzirwa hazvina kugadzirwa nezvinhu zvinodiwa, uye hazvisi pasi pekuyedzwa kunodiwa kuti ive nechokwadi chekuvimbika kwakakodzera kurapwa uye kuongororwa kwevanhu.
Nhanganyaya
Nezve iri reGwaro reMushandisi
Zvauchadzidza kubva kugwaro remushandisi uyu
Gwaro remushandisi rino rinotsanangura iyo Measurement Computing USB-3101 yekutora dhata mudziyo uye inonyora zvirevo zvemudziyo.
Zvibvumirano mugwaro remushandisi uyu
Kuti uwane mamwe mashoko
Mashoko anoratidzwa mubhokisi anoratidza mamwe mashoko uye mazano anobatsira ane chekuita nenyaya yauri kuverenga.
Chenjero! Yambiro ine shaded inopa ruzivo rwekubatsira kuti urege kuzvikuvadza iwe nevamwe, kukuvadza hardware yako, kana kurasikirwa nedata rako.
Bold mavara anoshandiswa pamazita ezvinhu zviri pachiratidziri, senge mabhatani, mabhokisi ezvinyorwa, uye mabhokisi ekutarisa.
Mavara eitalic anoshandiswa pamazita ezvinyorwa uye misoro yekubatsira, uye kusimbisa izwi kana chirevo.
Kwaungawane rumwe ruzivo
Rumwe ruzivo nezve USB-3101 Hardware inowanikwa pane yedu website pa www.mccdaq.com. Iwe unogona zvakare kubata Measurement Computing Corporation nemibvunzo chaiyo.
- Knowledgebase: kb.mccdaq.com
- Tech rutsigiro fomu: www.mccdaq.com/support/support_form.aspx
- Email: techsupport@mccdaq.com
- Runhare: 508-946-5100 uye tevera mirairo yekusvika Tech Support
Kune vatengi vepasi rese, bata muparidzi wenzvimbo yako. Tarisa kune iyo International Distributors chikamu pane yedu web site pa www.mccdaq.com/International.
Chitsauko 1 Kusuma iyo USB-3101
Overview: USB-3101 zvinhu
Gwaro remushandisi rino rine ruzivo rwese rwaunoda kuti ubatanidze USB-3101 pakombuta yako uye kune masaini aunoda kudzora. Iyo USB-3101 chikamu cheMeasurement Computing mhando ye USB-yakavakirwa data yekutora zvigadzirwa.
Iyo USB-3101 ndeye USB 2.0 yakazara-speed mudziyo inotsigirwa pasi peanozivikanwa eMicrosoft anoshanda masisitimu. Iyo USB-3101 inoenderana zvizere nezvose zviri zviviri USB 1.1 uye USB 2.0 ports. Windows® Iyo USB-3101 inopa nzira ina dzeanalogi voltage yakabuda, masere edhijitari I/O makubatanidza, uye imwe 32-bit chiitiko counter.
Iyo USB-3101 ine quad (4-channel) 16-bit digital-to-analog converter (DAC). Iwe unoisa voltage inobuda mhando yega yega yeDAC chiteshi yakazvimiririra ine software yebipolar kana unipolar. Bipolar range i ± 10 V, uye unipolar range i 0 kusvika 10 V. Izvo zvinobuda zveanalogi zvinogona kuvandudzwa mumwe nomumwe kana panguva imwe chete.
Iyo bidirectional synchronization yekubatanidza inokutendera iwe kuti ugadzirise panguva imwe chete iyo DAC inobuda pamidziyo yakawanda.
Iyo USB-3101 inoratidzira sere bidirectional dhijitari I/O yekubatanidza. Iwe unogona kugadzirisa mitsara yeDIO sekuisa kana kubuda mune imwe 8-bit port. Mapini ese edhijitari anoyangarara nekukasira. Iyo screw terminal yekubatanidza inopihwa yekudhonza-kumusoro (+5 V) kana kudhonza-pasi (0 volts) kumisikidzwa.
Iyo 32-bit counter inogona kuverenga TTL pulses.
Iyo USB-3101 inofambiswa neiyo +5 volt USB inopihwa kubva pakombuta yako. Hapana simba rekunze rinodiwa. Ese maI/O akabatana anogadzirwa kune screw terminals iri parutivi rumwe norumwe rwe USB-3101.
USB-3101 block diagram
USB-3101 mabasa anoratidzwa mune block dhayagiramu inoratidzwa pano.
Chitsauko 2 Kuisa iyo USB-3101
Kuburitsa
Sezvinoita chero mudziyo wemagetsi, iwe unofanirwa kungwarira paunenge uchibata kudzivirira kukuvadzwa kubva kune static magetsi. Usati wabvisa mudziyo kubva pakurongedzerwa kwacho, zviwisire pasi uchishandisa tambo yeruoko kana nekungobata chassis yekombuta kana chimwe chinhu chakadzika kuti ubvise chero yakachengetwa static charge.
Bata nesu pakarepo kana chero zvikamu zvisipo kana kukuvara.
Kuisa software
Tarisa kune MCC DAQ Kurumidza Kutanga uye iyo USB-3101 chigadzirwa peji pane yedu websaiti yeruzivo nezve software inotsigirwa ne USB-3101.
Isa software usati waisa mudziyo wako
Mutyairi anodiwa kumhanya USB-3101 akaiswa nesoftware. Naizvozvo, unofanirwa kuisa software package yaunoronga kushandisa usati waisa Hardware.
Kuisa hardware
Kuti ubatanidze USB-3101 kune system yako, batanidza tambo ye USB kune inowanikwa USB port pakombuta kana kune yekunze USB hub yakabatana nekombuta. Batanidza imwe magumo e USB tambo kune USB yekubatanidza pane mudziyo. Hapana simba rekunze rinodiwa.
Kana yakabatana kekutanga, Yakawanikwa Itsva Hardware dialog inovhura kana sisitimu yekushandisa yaona mudziyo. Kana dialog inovhara, kuiswa kwacho kwapera. Iyo Status LED pa USB-3101 inobatidzwa mushure mekunge mudziyo waiswa zvinobudirira.
Kana iyo Power LED ichidzima
Kana kutaurirana kwakarasika pakati pemudziyo nekombuta, mudziyo we LED unodzima. Kuti udzorere kutaurirana, bvisa tambo ye USB kubva pakombuta uye wozoibatanidza zvakare. Izvi zvinofanirwa kudzoreredza kutaurirana, uye iyo LED inofanirwa kubatika.
Calibrating hardware
Dhipatimendi reMeasurement Computing Manufacturing Test rinoita yekutanga fekitori calibration. Dzosera mudziyo kuMeasurement Computing Corporation kana kuenzanisa kuchidikanwa. Nguva inokurudzirwa yekuenzanisa igore rimwe.
Chitsauko 3 Functional Details
Zvikamu zvekunze
Iyo USB-3101 ine zvinotevera zvekunze zvikamu, sezvakaratidzwa mumufananidzo 3.
- USB connector
- Chimiro che LED
- Power akatungamirira
- Screw terminal banks (2)
USB connector
Iyo USB yekubatanidza inopa simba uye kutaurirana kune USB-3101. The voltage inopiwa kuburikidza ne USB connector inotenderera-inotenderera, uye inogona kunge iri pasi pe5 V. Hapana kunze kwemagetsi kunodiwa.
Chimiro che LED
Iyo Status LED inoratidza mamiriro ekutaurirana e USB-3101. Inopenya kana data ichiendeswa, uye inodzima kana USB-3101 isiri kutaurirana. Iyi LED inoshandisa kusvika ku10 mA yezvino uye haigone kuvharwa.
Power akatungamirira
Simba re LED rinovhenekera kana USB-3101 yakabatana ne USB port pakombuta yako kana kune yekunze USB hub yakabatana pakombuta yako.
Screw terminal banks
Iyo USB-3101 ine mitsara miviri yescrew terminals-mutsetse mumwe pamucheto wepamusoro weimba, uye mutsara mumwe pazasi. Mutsara wega wega une 28 dzekubatanidza. Shandisa 16 AWG kusvika 30 AWG waya geji paunenge uchigadzira screw terminal. Pini nhamba dzinoonekwa muMufananidzo 4.
Screw terminal - mapini 1-28
Iyo screw terminals pamucheto wezasi we USB-3101 (pini 1 kusvika 28) inopa zvinotevera zvinongedzo:
- Analogi maviri voltage zvinongedzo zvinongedzo (VOUT0, VOUT2)
- Ina analog pasi yekubatanidza (AGND)
- Masere edijitari I/O yekubatanidza (DIO0 kusvika DIO7)
Screw terminal - mapini 29-56
Iyo screw terminals pamucheto wepamusoro we USB-3101 (pini 29 kusvika 56) inopa zvinotevera zvinongedzo:
- Analogi maviri voltage zvinongedzo zvinongedzo (VOUT1, VOUT3)
- Ina analog pasi yekubatanidza (AGND)
- Imwe SYNC terminal yekuvharisa kwekunze uye akawanda-unit kuwiriranisa (SYNCLD)
- Matatu edhijitari pasi yekubatanidza (DGND)
- Imwe yekunze chiitiko counter yekubatanidza (CTR)
- Imwe dhijitari I/O inodhonza-pasi resistor yekubatanidza (DIO CTL)
- Rimwe voltage kubuda simba rekubatanidza (+5 V)
Analogi voltage inobuda zviteshi (VOUT0 kusvika VOUT3)
Mapini escrew terminal akanyorwa VOUT0 kuenda kuVOUT3 ane voltage output terminals (ona Mufananidzo 5). The voltage inobuda huwandu hwechiteshi chega chega isoftware-inorongwa kune bipolar kana unipolar. Bipolar range i ± 10 V, uye unipolar range i 0 kusvika 10 V. Zvigadzirwa zvechiteshi zvinogona kuvandudzwa mumwe nomumwe kana panguva imwe chete.
Digital I/O zviteshi (DIO0 kusvika DIO7)
Unogona kubatanidza mitsetse inosvika misere yedigital I/O kune screw terminals yakanyorwa DIO0 kuDIO7 (pini 21 kusvika 28).
Iwe unogona kugadzirisa yega yega yedhijitari yeiyi yekupinza kana kubuda.
Paunogadzirisa mabhiti edhijitari ekuisa, unogona kushandisa dhijitari I/O materminal kuona mamiriro echero TTL-level yekupinda; tarisa kuMufananidzo 6. Kana shanduko ichiiswa ku +5 V USER input, DIO7 inoverenga TRUE (1). Kana ukaendesa switch kuDGND, DIO7 inoverenga FALSE (0).
Kuti uwane rumwe ruzivo nezve digital chiratidzo chekubatanidza
Kuti uwane rumwe ruzivo nezve dhijitari masaini ekubatanidza uye dhijitari I/O matekiniki, tarisa kune Inotungamira kune Chiratidzo
Zvisungo (zvinowanikwa pane yedu website pa www.mccdaq.com/support/DAQ-Signal-Connections.aspx).
Digital I/O control terminal (DIO CTL) yekudhonza-kumusoro/pasi kugadzirisa
Mapini ese edhijitari anoyangarara nekukasira. Kana mapeji achiyangarara, mamiriro ezvisina waya haana kutsanangurwa (anogona kuverenga kumusoro kana pasi). Iwe unogona kugadzirisa izvo zvinopinda kuti uverenge yakakwirira kana yakaderera kukosha kana isina waya. Shandisa DIO CTL yekubatanidza (pini 54) kugadzirisa mapini edhijitari ekudhonzera kumusoro (zvinopinza zvinoverengwa kumusoro kana zvisina waya) kana kudhonzera pasi (zvinopinza zvinoverengwa zvakaderera kana zvisina waya).
- Kukwevera mapini edhijitari kuenda ku +5V, isa waya pini yeDIO CTL ku +5V terminal pini (pini 56).
- Kudonhedza mapini edhijitari pasi (0 volts), waya yeDIO CTL terminal pini kuDGND terminal pini (pini 50, 53, kana 55).
Nzvimbo dzepasi (AGND, DGND)
Eight analog ground (AGND) majoinidzano anopa yakajairika nzvimbo kune ese analog voltage kubuda migero.
Matatu edhijitari ivhu (DGND) yekubatanidza inopa yakajairika nzvimbo yeDIO, CTR, SYNCLD uye +5V yekubatanidza.
Synchronous DAC mutoro terminal (SYNCLD)
Iyo synchronous DAC mutoro wekubatanidza (pini 49) chiratidzo chebidirectional I/O chinokutendera kuti ugone kugadzirisa panguva imwe chete iyo DAC inobuda pamidziyo yakawanda. Iwe unogona kushandisa pini iyi kune zvinangwa zviviri:
- Gadzirisa seyekupinza (nhapwa modhi) kuti ugamuchire iyo D/A LOAD chiratidzo kubva kune yekunze sosi.
Kana iyo SYNCLD pini inogamuchira iyo trigger siginecha, mabudiro eanalogi anovandudzwa panguva imwe chete.
SYNCLD pini inofanirwa kuve ine logic yakaderera munhapwa modhi yekuvandudza nekukasira kweDAC zvinobuda
Kana iyo SYNCLD pini iri munhapwa modhi, zvinobuda zveanalogi zvinogona kuvandudzwa pakarepo kana kana mupendero wakanaka ukaonekwa paSYNCLD pini (iyi iri pasi pesoftware.)
Iyo SYNCLD pini inofanirwa kunge iri padanho rakaderera rekuti DAC zvinobuda zvigadzirise nekukasira. Kana iyo yekunze sosi inopa iyo D/A LOAD siginecha iri kudhonza iyo SYNCLD pini kumusoro, hapana update ichaitika.
Tarisa kuchikamu che "USB-3100 Series" muUniversal Library Rubatsiro kuti uwane ruzivo rwekugadzirisa zvinobuda neDAC nekukurumidza. - Gadzirisa sezvinobuda (master modhi) kutumira iyo yemukati D/A LOAD chiratidzo kune SYNCLD pini.
Iwe unogona kushandisa pini yeSYNCLD kuwiriranisa neyechipiri USB-3101 uye panguva imwe chete kugadzirisa zvinobuda zveDAC pamudziyo wega wega. Tarisa kuKuwiriranisa mayunitsi akawanda pane peji 12.
Shandisa InstaCal kugadzirisa iyo SYNCLD modhi satenzi kana muranda. Pasimba kumusoro uye gadzirisa iyo SYNCLD pini inoiswa kune muranda modhi (yekuisa).
Counter terminal (CTR)
Iyo CTR yekubatanidza (pini 52) ndiyo inopinza kune 32-bit chiitiko kaunda. Iyo yemukati counter increments kana TTL mazinga achichinja kubva pasi kuenda kumusoro. Iyo counter inogona kuverenga ma frequency anosvika 1 MHz.
Chiteshi chemagetsi (+5V)
Iyo +5 V yekubatanidza (pini 56) inodhonza simba kubva ku USB yekubatanidza. Iyi terminal ndeye +5V inobuda.
Chenjero! Iyo +5V terminal inobuda. Usabatana nemagetsi ekunze kana unogona kukuvadza USB-3101 uye pamwe komputa.
Kubatanidza mayunitsi akawanda
Iwe unogona kubatanidza iyo SYNCLD terminal pini (pini 49) yemaviri USB-3101 mauniti pamwe chete mune tenzi/muranda kumisikidzwa uye panguva imwe chete kugadzirisa iyo DAC yakabuda yemidziyo miviri. Ita zvinotevera.
- Batanidza pini yeSYNCLD yatenzi USB-3101 kune SYNCLD pini yemuranda USB-3101.
- Gadzirisa pini yeSYNCLD pamudziyo wenhapwa wekuisa kuti ugamuchire chiratidzo cheD/A LOAD kubva kumuchina mukuru. Shandisa InstaCal kuseta nzira yeSYNCLD pini.
- Gadzirisa pini yeSYNCLD pamudziyo mukuru wekubuda kuti ubudise puruzi inobuda paSYNCLD pini.
Seta iyo Universal Raibhurari SIMULTANEOUS sarudzo yechishandiso chimwe nechimwe.
Kana iyo SYNCLD pini pamudziyo wenhapwa inogamuchira chiratidzo, analog yekubuda chiteshi pane yega yega kifaa inogadziridzwa panguva imwe chete.
Anove example yegadziriso yetenzi/muranda inoratidzwa pano.
Chitsauko 4 Zvinotsanangurwa
Zvese zvakatemwa zvinogona kuchinja pasina chiziviso.
Yakajairika ku25 °C kunze kwekunge zvataurwa neimwe nzira.
Tsanangudzo mune italic mavara inovimbiswa nedhizaini.
Analogi voltage kubuda
Tafura 1. Analogi voltage output specifications
| Parameter | Condition | Tsanangudzo |
| Digital kune Analog converter | DAC8554 | |
| Nhamba yematanho | 4 | |
| Resolution | 16 zvishoma | |
| Output ranges | Calibrated | ± 10 V, 0 kusvika 10 V Software configurable |
| Un-calibrated | ±10.2 V, -0.04 kusvika 10.08 V Software configurable |
|
| Kubuda kwenguva pfupi | ± 10 V kusvika (0 kusvika 10 V) kana (0 kusvika 10 V) kusvika ± 10 V kusarudzwa kwemhando. (Cherechedzo 1) |
Nguva: 5 µS mhando Amplitude: 5V pp typ |
| Host PC inoiswa patsva, inobatidzwa, kumiswa kana reset command inopihwa kune mudziyo. (Cherechedzo 2) |
Nguva: 2 S taipa Amplitude: 2V pp typ |
|
| Simba rekutanga rakabatidzwa | Nguva: 50 mS typ Amplitude: 5V peak typ |
|
| Musiyano usiri wemutsara (Cherechedzo 3) | Calibrated | ±1.25 LSB mhando -2 LSB kusvika +1 LSB max |
| Un-calibrated | ±0.25 LSB mhando ±1 LSB max |
|
| Output current | VOUTx pini | ± 3.5 mA mhando |
| Output short-circuit protection | VOUTx yakabatana neAGND | Isingaperi |
| Output coupling | DC | |
| Simba uye gadzirisa mamiriro | MaDAC akacheneswa kusvika zero-scale: 0 V, ± 50 mV typ | |
| Kubuda kwemhando: 0-10V | ||
| Ruzha rwekubuda | 0 kusvika ku10 V | 14.95 µVrms typ |
| ± 10 V kureba | 31.67 µVrms typ | |
| Kugadzirisa nguva | kusvika ku1 LSB kururama | 25 µS mhando |
| Slew rate | 0 kusvika ku10 V | 1.20 V/µS mhando |
| ± 10 V kureba | 1.20 V/µS mhando | |
| throughput | Single-channel | 100 Hz max, zvinoenderana nehurongwa |
| Multi-channel | 100 Hz/#ch max, zvinoenderana nehurongwa |
Cherechedza 3: Iyo yakanyanya mutsauko isiri-mutsara yakatarwa inoshanda kune yese 0 kusvika 70 °C tembiricha yemhando ye USB-3101. Iyi dhizaini zvakare inokonzeresa zvikanganiso zvakanyanya nekuda kwesoftware calibration algorithm (muCalibrated mode chete) uye iyo DAC8554 yedhijitari kune analog inoshandura isiri-mitsara.
Tafura 2. Mhedziso yakarurama yezvinyorwa - calibrated output
| Range | Kururama (±LSB) |
| ±10 V | 14.0 |
| 0 kusvika 10 V | 22.0 |
Tafura 3. Mhedziso yakarurama yezvikamu zvinyorwa - calibrated output
| Range | % yekuverenga | Offset (±mV) | Kuyerera kwekanguva (%/°C) | Kunyatsoita chokwadi paFS (±mV) |
| ±10 V | ±0.0183 | 1.831 | 0.00055 | 3.661 |
| 0 kusvika 10 V | ±0.0183 | 0.915 | 0.00055 | 2.746 |
Tafura 4. Relative accuracy specifications
| Range | Hukama hwechokwadi (±LSB) | |
| ±10 V , 0 kusvika 10 V | 4.0 mhando | 12.0 max |
Analog goho calibration
Tafura 5. Analog output calibration specifications
| Parameter | Tsanangudzo |
| Inokurudzirwa nguva yekudziya-up | Maminitsi gumi nemashanu |
| On-board precision reference | DC level: 5.000 V ± 1 mV max |
| Tempco: ± 10 ppm/°C max | |
| Kugadzikana kwenguva refu: ± 10 ppm/SQRT (1000 maawa) | |
| Maitiro ekugadzirisa | Software calibration |
| Calibration interval | 1 gore |
Digital input/output
Tafura 6. Digital I / O tsanangudzo
| Parameter | Tsanangudzo |
| Digital logic type | CMOS |
| Nhamba yeI/O | 8 |
| Configuration | Yakagadzirirwa yakazvimirira yekupinza kana kubuda |
| Dhonza/kudhonza-pasi kugadzirisa
(Cherechedzo 4) |
User configurable Mapini ese anoyangarara (default) |
| Digital I/O yekuisa kurodha | TTL (default) |
| 47 kL (kudhonza-kumusoro/kudhonza-pasi zvigadziriso) | |
| Digital I/O yekufambisa mwero (system paced) | System inotsamira, 33 kusvika 1000 port inoverenga / inonyora kana imwechete bit inoverenga / inonyora pasekondi. |
| Kuisa yakakwira voltage | 2.0 V min, 5.5 V absolute max |
| Inzira yakadzika voltage | 0.8 V max, -0.5 V absolute min |
| Kubuditsa yakakwira voltage (IOH = -2.5 mA) | 3.8 V min |
| Kubuditsa yakaderera voltage (IOL = 2.5 mA) | 0.7 V Max |
| Simba uye gadzirisa mamiriro | Input |
Cherechedzo 4: Dhonza uye dhonza pasi nzvimbo yekugadzirisa inowanikwa uchishandisa DIO CTL terminal block pin 54. Kudonhedza-pasi kugadzirisa kunoda DIO CTL pini (pini 54) kuti ibatanidzwe nepini yeDGND (pini 50, 53 kana 55). Nekugadzirisa-kudhonza-up, pini yeDIO CTL inofanirwa kubatana kune +5V terminal pini (pini 56).
Synchronous DAC Mutoro
Tafura 7. SYNCLD I / O tsanangudzo
| Parameter | Condition | Tsanangudzo |
| Pin name | SYNCLD (terminal block pin 49) | |
| Simba uye gadzirisa mamiriro | Input | |
| Pini mhando | Bidirectional | |
| Kugumisa | Yemukati 100K ohms kudhonza-pasi | |
| Software inosarudzwa nzira | Output | Inobuda mukati D/A LOAD chiratidzo. |
| Input | Inogamuchira D/A LOAD chiratidzo kubva kunze sosi. | |
| Input clock rate | 100 Hz max | |
| Clock pulse width | Input | 1 µs min |
| Output | 5 µs min | |
| Input leakage current | ±1.0 µA mhando | |
| Kuisa yakakwira voltage | 4.0 V min, 5.5 V absolute max | |
| Inzira yakadzika voltage | 1.0 V max, -0.5 V absolute min | |
| Kubuditsa yakakwira voltage (Chinyorwa 5) | IOH = -2.5 mA | 3.3 V min |
| Hapana mutoro | 3.8 V min | |
| Kubuditsa yakaderera voltage (Chinyorwa 6) | IOL = 2.5 mA | 1.1 V Max |
| Hapana mutoro | 0.6 V Max |
Cherechedzo 5: SYNCLD ndeye Schmitt trigger yekupinda uye yakawandisa-ikozvino yakachengetedzwa ne200 Ohm inoteedzera resistor.
Cherechedzo 6: Kana SYNCLD iri mumodhi yekuisa, mabudiro eanalogi anogona kuvandudzwa nekukasika kana pakaonekwa mupendero wakanaka paSYNCLD pini (iyi iri pasi pesoftware control.) Zvisineyi, pini inofanira kunge iri padanho rakaderera kuti zvinobuda zveDAC zvisvike. gadziridzwa nekukurumidza. Kana yekunze sosi iri kudhonza pini kumusoro, hapana update ichaitika.
Counter
Tafura 8. CTR I / O tsanangudzo
| Parameter | Condition | Tsanangudzo |
| Pin name | CTR | |
| Nhamba yematanho | 1 | |
| Resolution | 32-bits | |
| Counter type | Chiitiko counter | |
| Input type | TTL, kukwira kumucheto kwakakonzerwa | |
| Counter kuverenga / kunyora mitengo (software paced) | Counter read | System inotsamira, 33 kusvika 1000 inoverenga pasekondi. |
| Counter write | System inotsamira, 33 kusvika 1000 inoverenga pasekondi. | |
| Schmidt anokonzera hysteresis | 20 mV kusvika 100 mV | |
| Input leakage current | ±1.0 µA mhando | |
| Input frequency | 1MHz hukuru | |
| High pulse width | 500 nS min | |
| Low pulse width | 500 ns min | |
| Kuisa yakakwira voltage | 4.0 V min, 5.5 V absolute max | |
| Inzira yakadzika voltage | 1.0 V max, -0.5 V absolute min |
Memory
Tafura 9. Memory tsanangudzo
| Parameter | Tsanangudzo | ||
| EEPROM | 256 bytes | ||
| EEPROM kugadzirisa | Kero range | Access | Tsanangudzo |
| 0x000-0x0FF | Verenga/nyora | 256 bytes mushandisi data | |
Microcontroller
Tafura 10. Microcontroller tsanangudzo
| Parameter | Tsanangudzo |
| Type | High performance 8-bit RISC microcontroller |
| Chirongwa chendangariro | 16,384 mazwi |
| Data ndangariro | 2,048 bytes |
Simba
Tafura 11. Zvinyorwa zvesimba
| Parameter | Condition | Tsanangudzo |
| Supply current | USB kuverenga | <100 mA |
| Mutengesi parizvino (Cherechedzo 7) | Quiscent current | 140 mA mhando |
| +5V mushandisi kubuda voltage range (Cherechedzo 8) | Inowanikwa paterminal block pin 56 | 4.5 V min, 5.25 V max |
| + 5V mushandisi kubuda ikozvino (Cherechedza 9) | Inowanikwa paterminal block pin 56 | 10 maA max |
Cherechedzo 7: Iyi ndiyo yakazara quiescent ikozvino inodiwa kune USB-3101 iyo inosanganisira inosvika gumi mA yeiyo mamiriro LED. Izvi hazvisanganisi chero zvingango rodha zvedhijitari I/O bits, +10V mushandisi terminal, kana VOUTx zvinobuda.
Cherechedzo 8: Kubuda voltage renji inotora USB simba rekupa riri mukati memiganhu yakatarwa.
Cherechedzo 9: Izvi zvinoreva huwandu hwese hwazvino hunogona kutorwa kubva ku +5V mushandisi terminal (pini 56) yekushandisa zvachose. Iyi dhizaini inosanganisirawo chero yekuwedzera mupiro nekuda kweDIO kurodha.
USB tsanangudzo
Tafura 12. USB tsanangudzo
| Parameter | Tsanangudzo |
| USB mudziyo mhando | USB 2.0 (yakazara-kumhanya) |
| USB mudziyo kuenderana | USB 1.1, 2.0 |
| USB tambo urefu | 3 m (9.84 ft) max |
| USB tambo yemhando | AB tambo, UL mhando AWM 2527 kana yakaenzana (min 24 AWG VBUS/GND, min 28 AWG D+/D–) |
Environmental
Tafura 13. Magadzirirwo ezvakatipoteredza
| Parameter | Tsanangudzo |
| Kushanda tembiricha range | 0 kusvika 70 °C |
| Storage tembiricha range | -40 kusvika 85 ° C |
| Humidity | 0 kusvika 90% isina-condensing |
Mechanical
Tafura 14. Mechanical tsanangudzo
| Parameter | Tsanangudzo |
| Dimensions (L × W × H) | 127 × 89.9 × 35.6 mm (5.00 × 3.53 × 1.40 mukati.) |
Screw terminal yekubatanidza
Tafura 15. Main connector specifications
| Parameter | Tsanangudzo |
| Connector type | Screw terminal |
| Wire gauge range | 16 AWG kusvika 30 AWG |
| Pin | Zita rechiratidzo | Pin | Zita rechiratidzo |
| 1 | VOUT0 | 29 | VOUT1 |
| 2 | NC | 30 | NC |
| 3 | VOUT2 | 31 | VOUT3 |
| 4 | NC | 32 | NC |
| 5 | AGND | 33 | AGND |
| 6 | NC | 34 | NC |
| 7 | NC | 35 | NC |
| 8 | NC | 36 | NC |
| 9 | NC | 37 | NC |
| 10 | AGND | 38 | AGND |
| 11 | NC | 39 | NC |
| 12 | NC | 40 | NC |
| 13 | NC | 41 | NC |
| 14 | NC | 42 | NC |
| 15 | AGND | 43 | AGND |
| 16 | NC | 44 | NC |
| 17 | NC | 45 | NC |
| 18 | NC | 46 | NC |
| 19 | NC | 47 | NC |
| 20 | AGND | 48 | AGND |
| 21 | DIO0 | 49 | SYNCLD |
| 22 | DIO1 | 50 | DGND |
| 23 | DIO2 | 51 | NC |
| 24 | DIO3 | 52 | CTR |
| 25 | DIO4 | 53 | DGND |
| 26 | DIO5 | 54 | DIO CTL |
| 27 | DIO6 | 55 | DGND |
| 28 | DIO7 | 56 | +5V |
EU Declaration of Conformity
Maererano ne ISO/IEC 17050-1:2010
Mugadziri: Iyo kambani Measurement Computing Corporation
Kero:
10 Commerce Way
Norton, MA 02766
USA
Product Category: Midziyo yemagetsi yekuyera, kutonga uye kushandisa marabhoritari.
Zuva uye Nzvimbo Yekuburitswa: Gumiguru 10, 2017, Norton, Massachusetts USA
Test Report Number: EMI4712.07/EMI5193.08
Measurement Computing Corporation inozivisa pasi pemutoro wega kuti chigadzirwa
USB-3101
inoenderana neiyo yakakodzera Union Harmonization Legislation uye inoenderana nezvinodiwa zvakakosha zvezvinotevera zvinoshanda European Directives:
Electromagnetic Compatibility (EMC) Directive 2014/30/EU
Yakadzika Voltage Kutungamira 2014/35 / EU
RoHS Directive 2011/65/EU
Conformity inoongororwa zvinoenderana neanotevera zviyero:
EMC:
Utsi:
- EN 61326-1:2013 (IEC 61326-1:2012), Kirasi A
- EN 55011: 2009 + A1:2010 (IEC CISPR 11:2009 + A1:2010), Boka 1, Kirasi A
Immunity:
- EN 61326-1: 2013 (IEC 61326-1: 2012), Inodzorwa EM Nzvimbo
- EN 61000-4-2:2008 (IEC 61000-4-2:2008)
- EN 61000-4-3 :2010 (IEC61000-4-3:2010)
Safety:
- EN 61010-1 (IEC 61010-1)
Environmental Affairs:
Zvinyorwa zvakagadzirwa musi kana shure kweZuva Rokuburitswa kweChiziviso cheKuenderana hazvina chero chinhu chinorambidzwa muhuwandu/mashandisirwo asingatenderwe neRoHS Directive.
Carl Haapaoja, Mutungamiriri weKusimbisa Hunhu
Iyo kambani Measurement Computing Corporation
10 Commerce Way
Norton, Massachusetts 02766
508-946-5100
Fax: 508-946-9500
E-mail: info@mccdaq.com
www.mccdaq.com
NI Hungary Kft
H-4031 Debrecen, Hátar út 1/A, Hungary
Runhare: + 36 (52) 515400
Fax: + 36 (52) 515414
http://hungary.ni.com/debrecen
sales@logicbus.com
Iva Nepfungwa, Funga Tekinoroji
+1 619 – 616 – 7350
www.logicbus.com
Zvinyorwa / Zvishandiso
 |
Logicbus 3101 USB Yakavakirwa Analog Output [pdf] Bhuku reMushandisi 3101 USB Yakavakirwa Analog Output, 3101, USB Yakavakirwa Analog Output, Yakavakirwa Analog Output, Analog Output, Output |