میشټاسټک وسیله د څو رنګه احاطو اختیارونو سره
Welcome to WisMesh
This guide helps you set up your Meshtastic device in minutes. Thanks for choosing WisMesh – A RAKwireless Product
- The WisMesh Tag is your super-slim go-to device for ready-to-use and long-lasting connectivity. It is ideal for users seeking a hassle-free Meshtastic node. This device is powered by the efficient MCU Nordic nRF52840, a top performer on the Meshtastic Community Approval list.
- Its integrated location tracking and acceleration sensors can provide accurate location data while hiking or traveling. Its unique slim enclosure with rubber-style protection makes it weatherproof.
- For this device use Meshtastic firmware-wismesh-tag-w.x.yy.zzzzzzz.uf2
مشخصات
| فیچر | تفصیل |
|---|---|
| وسیله | WisMesh Tag |
| ځواک | د USB چارج کول |
| ارتباط | Meshtastic Network |
د بسته محتويات
- WisMesh Tag غږ x 1
- لینارډ ایکس 1
- 4-Pin Magnetic Pogo Pin USB Cable x 1
پیل کول
Step 1: Power & Connect
Attach the magnetic end of the USB cable to the Tag and connect the other end to a PC or adapter. The device powers on automatically when charging or configuring.
Step 2:Manual Power On/Off
When the device is unplugged and off, press and hold the front center button for 5 seconds until you hear a beep — the device will power on.
- Front Button Functions:
- Long press (5s) – Power ON/OFF
- Single press – Disable LED and buzzer notifications
- Rear Button (top-left) Functions:
- Single press – Reset
- Double press – Enter DFU mode
Step 3: Pair with App
- Open the Meshtastic App
- Pair using PIN: 123456
4 ګام
- Set Region Select your region in the app.
Step 5 GoWireless
Unplug the cable – your WisMesh Tag is ready to use!
LED Lighting Indications
- سور: چارج کول
- GREEN (solid): Powered on
- GREEN (breathing): ENABLE DFU mode
- GREEN (blinking): MCU activity
- BLUE: New message received
نورو معلوماتو ته اړتیا لرئ؟
د محصول د تفصيلي مشخصاتو، ترتیب لارښوونو، او تخنیکي ملاتړ لپاره، زموږ د آنلاین سند مرکز ته د لاسرسي لپاره ښي خوا ته د QR کوډ سکین کړئ. د وروستي سرچینو او د ستونزو حل کولو لارښوونو سره تازه اوسئ ترڅو له خپل وسیله څخه ډیره ګټه پورته کړئ.
Scan for WisMesh Tag اسناد
FAQ
How do I power on the WisMesh Tag?
Press and hold the front center button for 5 seconds until you hear a beep.
What should I do if the device doesn't connect to the app?
Ensure the region is set in the app and try pairing again using the PIN: 123456.
څنګه کولی شم وسیله بیا تنظیم کړم؟
Press the rear button (top-left) once to reset the device.
مختلف LED رنګونه څه ته اشاره کوي؟
Refer to the LED Lighting Indications section for detailed information.
اسناد / سرچینې
 |
میشټاسټک میشټاسټک وسیله د څو رنګه احاطو اختیارونو سره [pdf] د کارونکي لارښود v1، میشټاسټک وسیله د څو رنګه احاطو اختیارونو سره، میشټاسټک وسیله د څو رنګه احاطو اختیارونو سره، د څو رنګه احاطو اختیارونو سره، د احاطو اختیارونه، اختیارونه |