Meshtastic Device With Multicolor Enclosures Options
Welcome to WisMesh
This guide helps you set up your Meshtastic device in minutes. Thanks for choosing WisMesh – A RAKwireless Product
- The WisMesh Tag is your super-slim go-to device for ready-to-use and long-lasting connectivity. It is ideal for users seeking a hassle-free Meshtastic node. This device is powered by the efficient MCU Nordic nRF52840, a top performer on the Meshtastic Community Approval list.
- Its integrated location tracking and acceleration sensors can provide accurate location data while hiking or traveling. Its unique slim enclosure with rubber-style protection makes it weatherproof.
- For this device use Meshtastic firmware-wismesh-tag-w.x.yy.zzzzzzz.uf2
Specifications
| Feature | Description |
|---|---|
| Device | WisMesh Tag |
| Power | USB Charging |
| Connectivity | Meshtastic Network |
Package Contents
- WisMesh Tag Device x 1
- Lanyard x 1
- 4-Pin Magnetic Pogo Pin USB Cable x 1
Getting Started
Step 1: Power & Connect
Attach the magnetic end of the USB cable to the Tag and connect the other end to a PC or adapter. The device powers on automatically when charging or configuring.
Step 2:Manual Power On/Off
When the device is unplugged and off, press and hold the front center button for 5 seconds until you hear a beep — the device will power on.
- Front Button Functions:
- Long press (5s) – Power ON/OFF
- Single press – Disable LED and buzzer notifications
- Rear Button (top-left) Functions:
- Single press – Reset
- Double press – Enter DFU mode
Step 3: Pair with App
- Open the Meshtastic App
- Pair using PIN: 123456
Step 4
- Set Region Select your region in the app.
Step 5 GoWireless
Unplug the cable – your WisMesh Tag is ready to use!
LED Lighting Indications
- RED: Charging
- GREEN (solid): Powered on
- GREEN (breathing): ENABLE DFU mode
- GREEN (blinking): MCU activity
- BLUE: New message received
Need More Information?
For detailed product specifications, configuration guides, and technical support, scan the QR code on the right to access our online document center. Stay up to date with the latest resources and troubleshooting tips to get the most out of your device.
Scan for WisMesh Tag Documentation
FAQ
How do I power on the WisMesh Tag?
Press and hold the front center button for 5 seconds until you hear a beep.
What should I do if the device doesn't connect to the app?
Ensure the region is set in the app and try pairing again using the PIN: 123456.
How can I reset the device?
Press the rear button (top-left) once to reset the device.
What do the different LED colors indicate?
Refer to the LED Lighting Indications section for detailed information.
Documents / Resources
 |
Meshtastic Meshtastic Device With Multicolor Enclosures Options [pdf] User Guide v1, Meshtastic Device With Multicolor Enclosures Options, Meshtastic Device With Multicolor Enclosures Options, with Multicolor Enclosures Options, Enclosures Options, Options |