Dispositivu Meshtastic cù opzioni di custodie multicolore
Welcome to WisMesh
This guide helps you set up your Meshtastic device in minutes. Thanks for choosing WisMesh – A RAKwireless Product
- The WisMesh Tag is your super-slim go-to device for ready-to-use and long-lasting connectivity. It is ideal for users seeking a hassle-free Meshtastic node. This device is powered by the efficient MCU Nordic nRF52840, a top performer on the Meshtastic Community Approval list.
- Its integrated location tracking and acceleration sensors can provide accurate location data while hiking or traveling. Its unique slim enclosure with rubber-style protection makes it weatherproof.
- For this device use Meshtastic firmware-wismesh-tag-w.x.yy.zzzzzzz.uf2
Specificazioni
| Feature | Descrizzione |
|---|---|
| Dispositivu | WisMesh Tag |
| putenza | Carica USB |
| Connettività | Meshtastic Network |
Cuntenutu di u pacchettu
- WisMesh Tag Dispositivu x 1
- Cordicella x 1
- 4-Pin Magnetic Pogo Pin USB Cable x 1
Cuminciatu
Step 1: Power & Connect
Attach the magnetic end of the USB cable to the Tag and connect the other end to a PC or adapter. The device powers on automatically when charging or configuring.
Step 2:Manual Power On/Off
When the device is unplugged and off, press and hold the front center button for 5 seconds until you hear a beep — the device will power on.
- Front Button Functions:
- Long press (5s) – Power ON/OFF
- Single press – Disable LED and buzzer notifications
- Rear Button (top-left) Functions:
- Single press – Reset
- Double press – Enter DFU mode
Step 3: Pair with App
- Open the Meshtastic App
- Pair using PIN: 123456
Passu 4
- Set Region Select your region in the app.
Step 5 GoWireless
Unplug the cable – your WisMesh Tag is ready to use!
LED Lighting Indications
- ROSSU: In carica
- GREEN (solid): Powered on
- GREEN (breathing): ENABLE DFU mode
- GREEN (blinking): MCU activity
- BLUE: New message received
Avete bisognu di più infurmazione?
Per specifiche dettagliate di u produttu, guide di cunfigurazione è supportu tecnicu, scansate u codice QR à diritta per accede à u nostru centru di documenti in linea. Restate aggiornati cù l'ultime risorse è cunsiglii per a risoluzione di i prublemi per sfruttà à u massimu u vostru dispositivu.
Scan for WisMesh Tag Documentazione
FAQ
How do I power on the WisMesh Tag?
Press and hold the front center button for 5 seconds until you hear a beep.
What should I do if the device doesn't connect to the app?
Ensure the region is set in the app and try pairing again using the PIN: 123456.
Cumu possu resettate u dispusitivu?
Press the rear button (top-left) once to reset the device.
Chì indicanu i sfarenti culori LED?
Refer to the LED Lighting Indications section for detailed information.
Documenti / Risorse
 |
Meshtastic Meshtastic Device With Multicolor Enclosures Options [pdfGuida di l'utente v1, Meshtastic Device With Multicolor Enclosures Options, Meshtastic Device With Multicolor Enclosures Options, with Multicolor Enclosures Options, Enclosures Options, Options |