Inneal Meshtastic le roghainnean cèisean ioma-dhathach
Welcome to WisMesh
This guide helps you set up your Meshtastic device in minutes. Thanks for choosing WisMesh – A RAKwireless Product
- The WisMesh Tag is your super-slim go-to device for ready-to-use and long-lasting connectivity. It is ideal for users seeking a hassle-free Meshtastic node. This device is powered by the efficient MCU Nordic nRF52840, a top performer on the Meshtastic Community Approval list.
- Its integrated location tracking and acceleration sensors can provide accurate location data while hiking or traveling. Its unique slim enclosure with rubber-style protection makes it weatherproof.
- For this device use Meshtastic firmware-wismesh-tag-w.x.yy.zzzzzzz.uf2
Sònrachaidhean
| Feart | Tuairisgeul |
|---|---|
| Inneal | WisMesh Tag |
| Cumhachd | USB cosgais |
| Ceangalachd | Meshtastic Network |
Susbaint pacaid
- WisMesh Tag Inneal x 1
- Lannard x 1
- 4-Pin Magnetic Pogo Pin USB Cable x 1
Toiseach tòiseachaidh
Step 1: Power & Connect
Attach the magnetic end of the USB cable to the Tag and connect the other end to a PC or adapter. The device powers on automatically when charging or configuring.
Step 2:Manual Power On/Off
When the device is unplugged and off, press and hold the front center button for 5 seconds until you hear a beep — the device will power on.
- Front Button Functions:
- Long press (5s) – Power ON/OFF
- Single press – Disable LED and buzzer notifications
- Rear Button (top-left) Functions:
- Single press – Reset
- Double press – Enter DFU mode
Step 3: Pair with App
- Open the Meshtastic App
- Pair using PIN: 123456
Ceum 4
- Set Region Select your region in the app.
Step 5 GoWireless
Unplug the cable – your WisMesh Tag is ready to use!
LED Lighting Indications
- RED: Cìsean
- GREEN (solid): Powered on
- GREEN (breathing): ENABLE DFU mode
- GREEN (blinking): MCU activity
- BLUE: New message received
Feum air barrachd fiosrachaidh?
Airson mion-chomharrachadh toraidh mionaideach, stiùiridhean rèiteachaidh, agus taic theicnigeach, sgan an còd QR air an làimh dheis gus faighinn chun ionad sgrìobhainnean air-loidhne againn. Cùm suas ris na goireasan as ùire agus molaidhean fuasgladh dhuilgheadasan gus a’ chuid as fheàrr fhaighinn às an inneal agad.
Scan for WisMesh Tag Sgrìobhainnean
Ceistean Cumanta
How do I power on the WisMesh Tag?
Press and hold the front center button for 5 seconds until you hear a beep.
What should I do if the device doesn't connect to the app?
Ensure the region is set in the app and try pairing again using the PIN: 123456.
Ciamar as urrainn dhomh an inneal ath-shuidheachadh?
Press the rear button (top-left) once to reset the device.
Dè tha na diofar dhathan LED a’ nochdadh?
Refer to the LED Lighting Indications section for detailed information.
Sgrìobhainnean/Goireasan
 |
Meshtastic Meshtastic Device With Multicolor Enclosures Options [pdfStiùireadh Cleachdaiche v1, Meshtastic Device With Multicolor Enclosures Options, Meshtastic Device With Multicolor Enclosures Options, with Multicolor Enclosures Options, Enclosures Options, Options |