Meshtastic Device With Multicolor Enclosures Options
Welcome to WisMesh
This guide helps you set up your Meshtastic device in minutes. Thanks for choosing WisMesh – A RAKwireless Product
- The WisMesh Tag is your super-slim go-to device for ready-to-use and long-lasting connectivity. It is ideal for users seeking a hassle-free Meshtastic node. This device is powered by the efficient MCU Nordic nRF52840, a top performer on the Meshtastic Community Approval list.
- Its integrated location tracking and acceleration sensors can provide accurate location data while hiking or traveling. Its unique slim enclosure with rubber-style protection makes it weatherproof.
- For this device use Meshtastic firmware-wismesh-tag-w.x.yy.zzzzzzz.uf2
Especificacións
| Característica | Descrición |
|---|---|
| Dispositivo | WisMesh Tag |
| Poder | Carga USB |
| Conectividade | Meshtastic Network |
Contido do paquete
- WisMesh Tag Dispositivo x 1
- Cordón x 1
- 4-Pin Magnetic Pogo Pin USB Cable x 1
Comezando
Step 1: Power & Connect
Attach the magnetic end of the USB cable to the Tag and connect the other end to a PC or adapter. The device powers on automatically when charging or configuring.
Step 2:Manual Power On/Off
When the device is unplugged and off, press and hold the front center button for 5 seconds until you hear a beep — the device will power on.
- Front Button Functions:
- Long press (5s) – Power ON/OFF
- Single press – Disable LED and buzzer notifications
- Rear Button (top-left) Functions:
- Single press – Reset
- Double press – Enter DFU mode
Step 3: Pair with App
- Open the Meshtastic App
- Pair using PIN: 123456
Paso 4
- Set Region Select your region in the app.
Step 5 GoWireless
Unplug the cable – your WisMesh Tag is ready to use!
LED Lighting Indications
- VERMELLO: Cargando
- GREEN (solid): Powered on
- GREEN (breathing): ENABLE DFU mode
- GREEN (blinking): MCU activity
- BLUE: New message received
Necesitas máis información?
Para obter especificacións detalladas do produto, guías de configuración e asistencia técnica, escanee o código QR da dereita para acceder ao noso centro de documentos en liña. Mantéñase ao día cos recursos e consellos de resolución de problemas máis recentes para sacar o máximo proveito do seu dispositivo.
Scan for WisMesh Tag Documentación
FAQ
How do I power on the WisMesh Tag?
Press and hold the front center button for 5 seconds until you hear a beep.
What should I do if the device doesn't connect to the app?
Ensure the region is set in the app and try pairing again using the PIN: 123456.
Como podo restablecer o dispositivo?
Press the rear button (top-left) once to reset the device.
Que indican as diferentes cores LED?
Refer to the LED Lighting Indications section for detailed information.
Documentos/Recursos
 |
Meshtastic Meshtastic Device With Multicolor Enclosures Options [pdfGuía do usuario v1, Meshtastic Device With Multicolor Enclosures Options, Meshtastic Device With Multicolor Enclosures Options, with Multicolor Enclosures Options, Enclosures Options, Options |