Ngwaọrụ Meshtastic nwere nhọrọ mkpuchi Multicolor
Welcome to WisMesh
This guide helps you set up your Meshtastic device in minutes. Thanks for choosing WisMesh – A RAKwireless Product
- The WisMesh Tag is your super-slim go-to device for ready-to-use and long-lasting connectivity. It is ideal for users seeking a hassle-free Meshtastic node. This device is powered by the efficient MCU Nordic nRF52840, a top performer on the Meshtastic Community Approval list.
- Its integrated location tracking and acceleration sensors can provide accurate location data while hiking or traveling. Its unique slim enclosure with rubber-style protection makes it weatherproof.
- For this device use Meshtastic firmware-wismesh-tag-w.x.yy.zzzzzzz.uf2
Nkọwapụta
| Njirimara | Nkọwa |
|---|---|
| Ngwaọrụ | WisMesh Tag |
| Ike | Nchaji USB |
| Njikọta | Meshtastic Network |
Ihe ngwugwu
- WisMesh Tag Ngwaọrụ x 1
- Lanyard x 1
- 4-Pin Magnetic Pogo Pin USB Cable x 1
Na-amalite
Step 1: Power & Connect
Attach the magnetic end of the USB cable to the Tag and connect the other end to a PC or adapter. The device powers on automatically when charging or configuring.
Step 2:Manual Power On/Off
When the device is unplugged and off, press and hold the front center button for 5 seconds until you hear a beep — the device will power on.
- Front Button Functions:
- Long press (5s) – Power ON/OFF
- Single press – Disable LED and buzzer notifications
- Rear Button (top-left) Functions:
- Single press – Reset
- Double press – Enter DFU mode
Step 3: Pair with App
- Open the Meshtastic App
- Pair using PIN: 123456
Nzọụkwụ 4
- Set Region Select your region in the app.
Step 5 GoWireless
Unplug the cable – your WisMesh Tag is ready to use!
LED Lighting Indications
- RED: Ịkwụ ụgwọ
- GREEN (solid): Powered on
- GREEN (breathing): ENABLE DFU mode
- GREEN (blinking): MCU activity
- BLUE: New message received
Achọrọ ozi ndị ọzọ?
Maka nkọwapụta ngwaahịa zuru ezu, ntuziaka nhazi, yana nkwado teknụzụ, lelee koodu QR n'aka nri iji nweta etiti akwụkwọ ntanetị anyị. Jiri akụrụngwa kachasị ọhụrụ yana ndụmọdụ nchọpụta nsogbu ka ị nweta ihe kacha mma na ngwaọrụ gị.
Scan for WisMesh Tag Akwụkwọ
FAQ
How do I power on the WisMesh Tag?
Press and hold the front center button for 5 seconds until you hear a beep.
What should I do if the device doesn't connect to the app?
Ensure the region is set in the app and try pairing again using the PIN: 123456.
Kedu ka m ga-esi tọgharịa ngwaọrụ ahụ?
Press the rear button (top-left) once to reset the device.
Kedu ihe agba agba LED dị iche iche na-egosi?
Refer to the LED Lighting Indications section for detailed information.
Akwụkwọ / akụrụngwa
 |
Meshtastic Meshtastic Device With Multicolor Enclosures Options [pdf] Ntuziaka onye ọrụ v1, Meshtastic Device With Multicolor Enclosures Options, Meshtastic Device With Multicolor Enclosures Options, with Multicolor Enclosures Options, Enclosures Options, Options |