Na'urar Meshtastic Tare da Zaɓuɓɓukan Rukunin launuka masu yawa
Welcome to WisMesh
This guide helps you set up your Meshtastic device in minutes. Thanks for choosing WisMesh – A RAKwireless Product
- The WisMesh Tag is your super-slim go-to device for ready-to-use and long-lasting connectivity. It is ideal for users seeking a hassle-free Meshtastic node. This device is powered by the efficient MCU Nordic nRF52840, a top performer on the Meshtastic Community Approval list.
- Its integrated location tracking and acceleration sensors can provide accurate location data while hiking or traveling. Its unique slim enclosure with rubber-style protection makes it weatherproof.
- For this device use Meshtastic firmware-wismesh-tag-w.x.yy.zzzzzzz.uf2
Ƙayyadaddun bayanai
| Siffar | Bayani |
|---|---|
| Na'ura | WisMesh Tag |
| Ƙarfi | Cajin USB |
| Haɗuwa | Meshtastic Network |
Abubuwan Kunshin
- WisMesh Tag Na'urar x 1
- Lanyard x 1
- 4-Pin Magnetic Pogo Pin USB Cable x 1
Farawa
Step 1: Power & Connect
Attach the magnetic end of the USB cable to the Tag and connect the other end to a PC or adapter. The device powers on automatically when charging or configuring.
Step 2:Manual Power On/Off
When the device is unplugged and off, press and hold the front center button for 5 seconds until you hear a beep — the device will power on.
- Front Button Functions:
- Long press (5s) – Power ON/OFF
- Single press – Disable LED and buzzer notifications
- Rear Button (top-left) Functions:
- Single press – Reset
- Double press – Enter DFU mode
Step 3: Pair with App
- Open the Meshtastic App
- Pair using PIN: 123456
Mataki na 4
- Set Region Select your region in the app.
Step 5 GoWireless
Unplug the cable – your WisMesh Tag is ready to use!
LED Lighting Indications
- JA: caji
- GREEN (solid): Powered on
- GREEN (breathing): ENABLE DFU mode
- GREEN (blinking): MCU activity
- BLUE: New message received
Bukatar Karin Bayani?
Don cikakkun bayanai dalla-dalla na samfur, jagororin daidaitawa, da goyan bayan fasaha, duba lambar QR akan dama don samun damar cibiyar takaddar mu ta kan layi. Kasance tare da sabbin albarkatu da shawarwarin magance matsala don samun mafi kyawun na'urar ku.
Scan for WisMesh Tag Takaddun bayanai
FAQ
How do I power on the WisMesh Tag?
Press and hold the front center button for 5 seconds until you hear a beep.
What should I do if the device doesn't connect to the app?
Ensure the region is set in the app and try pairing again using the PIN: 123456.
Ta yaya zan iya sake saita na'urar?
Press the rear button (top-left) once to reset the device.
Menene launukan LED daban-daban ke nunawa?
Refer to the LED Lighting Indications section for detailed information.
Takardu / Albarkatu
 |
Na'urar Meshtastic Meshtastic Tare da Zaɓuɓɓukan Rukunin launuka masu yawa [pdf] Jagorar mai amfani v1, Na'urar Meshtastic Tare da Zaɓuɓɓukan Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa . |