Meshtastic Device With Multicolor Enclosures Options
Welcome to WisMesh
This guide helps you set up your Meshtastic device in minutes. Thanks for choosing WisMesh – A RAKwireless Product
- The WisMesh Tag is your super-slim go-to device for ready-to-use and long-lasting connectivity. It is ideal for users seeking a hassle-free Meshtastic node. This device is powered by the efficient MCU Nordic nRF52840, a top performer on the Meshtastic Community Approval list.
- Its integrated location tracking and acceleration sensors can provide accurate location data while hiking or traveling. Its unique slim enclosure with rubber-style protection makes it weatherproof.
- For this device use Meshtastic firmware-wismesh-tag-w.x.yy.zzzzzzz.uf2
ವಿಶೇಷಣಗಳು
| ವೈಶಿಷ್ಟ್ಯ | ವಿವರಣೆ |
|---|---|
| ಸಾಧನ | WisMesh Tag |
| ಶಕ್ತಿ | USB ಚಾರ್ಜಿಂಗ್ |
| ಸಂಪರ್ಕ | Meshtastic Network |
ಪ್ಯಾಕೇಜ್ ವಿಷಯಗಳು
- WisMesh Tag ಸಾಧನ x 1
- ಲ್ಯಾನ್ಯಾರ್ಡ್ x 1
- 4-Pin Magnetic Pogo Pin USB Cable x 1
ಪ್ರಾರಂಭಿಸಲಾಗುತ್ತಿದೆ
Step 1: Power & Connect
Attach the magnetic end of the USB cable to the Tag and connect the other end to a PC or adapter. The device powers on automatically when charging or configuring.
Step 2:Manual Power On/Off
When the device is unplugged and off, press and hold the front center button for 5 seconds until you hear a beep — the device will power on.
- Front Button Functions:
- Long press (5s) – Power ON/OFF
- Single press – Disable LED and buzzer notifications
- Rear Button (top-left) Functions:
- Single press – Reset
- Double press – Enter DFU mode
Step 3: Pair with App
- Open the Meshtastic App
- Pair using PIN: 123456
ಹಂತ 4
- Set Region Select your region in the app.
Step 5 GoWireless
Unplug the cable – your WisMesh Tag is ready to use!
LED Lighting Indications
- ಕೆಂಪು: ಚಾರ್ಜಿಂಗ್
- GREEN (solid): Powered on
- GREEN (breathing): ENABLE DFU mode
- GREEN (blinking): MCU activity
- BLUE: New message received
ಹೆಚ್ಚಿನ ಮಾಹಿತಿ ಬೇಕೇ?
ವಿವರವಾದ ಉತ್ಪನ್ನ ವಿಶೇಷಣಗಳು, ಕಾನ್ಫಿಗರೇಶನ್ ಮಾರ್ಗದರ್ಶಿಗಳು ಮತ್ತು ತಾಂತ್ರಿಕ ಬೆಂಬಲಕ್ಕಾಗಿ, ನಮ್ಮ ಆನ್‌ಲೈನ್ ಡಾಕ್ಯುಮೆಂಟ್ ಕೇಂದ್ರವನ್ನು ಪ್ರವೇಶಿಸಲು ಬಲಭಾಗದಲ್ಲಿರುವ QR ಕೋಡ್ ಅನ್ನು ಸ್ಕ್ಯಾನ್ ಮಾಡಿ. ನಿಮ್ಮ ಸಾಧನದಿಂದ ಹೆಚ್ಚಿನದನ್ನು ಪಡೆಯಲು ಇತ್ತೀಚಿನ ಸಂಪನ್ಮೂಲಗಳು ಮತ್ತು ದೋಷನಿವಾರಣೆ ಸಲಹೆಗಳೊಂದಿಗೆ ನವೀಕೃತವಾಗಿರಿ.
Scan for WisMesh Tag ದಾಖಲೀಕರಣ
FAQ
How do I power on the WisMesh Tag?
Press and hold the front center button for 5 seconds until you hear a beep.
What should I do if the device doesn't connect to the app?
Ensure the region is set in the app and try pairing again using the PIN: 123456.
ನಾನು ಸಾಧನವನ್ನು ಹೇಗೆ ಮರುಹೊಂದಿಸಬಹುದು?
Press the rear button (top-left) once to reset the device.
ವಿವಿಧ ಎಲ್ಇಡಿ ಬಣ್ಣಗಳು ಏನು ಸೂಚಿಸುತ್ತವೆ?
Refer to the LED Lighting Indications section for detailed information.
ದಾಖಲೆಗಳು / ಸಂಪನ್ಮೂಲಗಳು
 |
Meshtastic Meshtastic Device With Multicolor Enclosures Options [ಪಿಡಿಎಫ್] ಬಳಕೆದಾರ ಮಾರ್ಗದರ್ಶಿ v1, Meshtastic Device With Multicolor Enclosures Options, Meshtastic Device With Multicolor Enclosures Options, with Multicolor Enclosures Options, Enclosures Options, Options |