Resistex Miks Installation Guide

Product Features & Options

Orientable / Adjustable

This section illustrates features related to adjustability. Diagram 1 shows a circular fixture with an integrated mechanism allowing for rotation, indicated by curved arrows. This suggests the light beam can be directed.

Basse Luminance / Low Light

This section details features related to low light output. Diagram 2 shows the fixture with a diffuser, and arrows indicate how it is fitted or inserted, suggesting a specific type of light diffusion or output characteristic.

Safety and Maintenance Instructions

Safety Notes

• Never work on the luminaire when it is live (under voltage).
• Installation must be performed by a professional installer, adhering to all relevant electrical installation standards and regulations.
• Be aware of the risk of electrostatic discharges (ESD Norm). Handle the product with necessary precautions.
• Please observe the provided notes and follow the mounting steps carefully.

Maintenance Instructions

• Do not use chemical or abrasive products to clean the fixture.
• Keep these instructions for future dismantling or maintenance work. Additional information on Resistex luminaires is available on the website www.resistex-sa.com.
• Resistex cannot be held responsible for any misuse of the product.

Mounting / Installation

1. Step 1: Prepare the Opening

   A circular opening in the ceiling panel is required, with a diameter of Ø69 mm (+/- 1 mm).

2. Step 2: Insert the Fixture

   The luminaire is shown being inserted into the prepared ceiling opening from above.

3. Step 3: Secure the Fixture (Rotation)

   The fixture is rotated, indicated by a curved arrow, to engage a locking mechanism and secure it within the opening.

4. Step 4: Engage Securing Clips

   Spring clips or retaining mechanisms on the fixture are shown being engaged to firmly hold it in place against the ceiling surface.

5. Step 5: Connect Wiring (Initial)

   The electrical wires are fed into a connector block. The diagram shows the wires being inserted into the appropriate terminals within the connector.

6. Step 6: Close Connector

   The connector block is closed or latched, securing the wire connections.

7. Step 7: Identify Terminals

   The connector block terminals are clearly labeled: 'L' for Live, 'N' for Neutral, and an Earth symbol (⏚ or similar, represented here as [earth-symbol]).

8. Step 8: Final Fixture Placement

   The luminaire is shown fully installed and secured in the ceiling, with its front visible.

9. Step 9: Electrical Connection Verification

   This step illustrates the correct electrical connection. A diagram shows a graph with a green checkmark (✔️) indicating a proper connection, and a red cross (❌) indicating an incorrect connection, likely related to polarity or wiring.

10. Step 10: Completed Installation

    A final view of the installed Miks downlight in the ceiling.