Resistex Miks Installation Instructions

Options and Accessories

Orientable / Adjustable

Step 1: Shows a circular cutout with dimensions Ø69 (±1mm) and the fixture.

Step 2: Depicts inserting the luminaire into the cutout. [arrow pointing up]

Step 3: Shows rotating the luminaire to secure it. [circular arrow]

Basse Luminance / Low Light

Step 1: Shows a component for low light adjustment.

Step 2: Depicts inserting this component. [arrow pointing up]

Step 3: Shows securing this component.

Montage / Installation

Step 1: Shows the required cutout diameter: Ø69 (±1mm).

Step 2: Illustrates inserting the luminaire into the prepared opening. [arrow pointing up]

Step 3: Depicts rotating the luminaire to lock it into position. [circular arrow]

Step 4: Shows a close-up of the electrical connector and wire preparation. [arrow pointing right]

Step 5: Illustrates opening the electrical connector mechanism. [circular arrow]

Step 6: Depicts inserting the electrical wires (Live, Neutral) into the connector terminals. [arrow pointing right]

Step 7: Shows the connector terminals labeled L (Live), N (Neutral), and [earth symbol].

Step 8: Illustrates securing the luminaire in place, likely with integrated springs or clips. [circular arrow]

Step 9: Shows the final insertion into the ceiling. Includes a diagram with ✔️ for correct wire connection and ❌ for incorrect connection (e.g., pinched wires).

Step 10: A view of the fully installed luminaire in the ceiling.

Safety and Maintenance Instructions

Safety Notes

• Never work on the luminaire when it is live (under voltage).
• Installation must be performed by a professional installer, adhering to electrical installation standards and regulations.
• Risk of electrostatic discharges (ESD Norm). Handle with necessary precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemical or abrasive products to clean the luminaire.
• Keep these instructions for dismantling or future maintenance.
• Additional information about RESISTEX luminaires is available on the website www.resistex-sa.com.
• RESISTEX cannot be held responsible for any misuse of the product.

Company Information and Certifications

Website: www.resistex-sa.com

RESISTEX EXPLOITATION

11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France

Tel: 04 93 276 276 - Fax: 04 93 276 280 - Email: contact@resistex-sa.com

APE 2740Z - Siret 487 593 477 00010 - SAS CAPITAL 649979 € - T.V.A. F.R. 73 487 593 477

Certifications:

• ROHS Compliant
• IP65 Rated (Ingress Protection)
• IK07 Rated (Impact Resistance)
• Class II Electrical Safety
• CE Marked
• ANS (Certification Mark)