Resistex Miks LED Downlight

Features

• Adjustable Orientation: The luminaire can be adjusted for optimal light direction.
• Low Luminance / Low Light: Designed for specific lighting requirements.

Safety Notes

• Never work on the luminaire when it is live. [Power symbol]
• Installation must be performed by a professional installer in compliance with standards and regulations for electrical installations.
• Risk of electrostatic discharges (ESD Norm). Handle with necessary precautions.
• Please observe the notes and assembly steps.

Maintenance Instructions

• Do not use chemical or abrasive products to clean the luminaire.
• Keep these instructions for dismantling or future maintenance.
• Additional information about RESISTEX luminaires can be found on the website www.resistex-sa.com.
• RESISTEX cannot be held responsible for any misuse of the product.

Installation Steps

1. Step 1: Prepare Mounting Hole

   Prepare the ceiling opening with a diameter of 69mm (+/-1mm).

2. Step 2: Insert Luminaire

   Insert the luminaire into the prepared hole.

3. Step 3: Secure Luminaire

   Rotate the luminaire to secure it in place within the mounting hole.

4. Step 4: Connect Wires

   Connect the electrical wires using the provided push-in connectors. Ensure proper wire stripping and insertion.

5. Step 5: Open Terminal Block

   Open the terminal block cover to access the connection terminals.

6. Step 6: Connect Terminals

   Insert the Live (L), Neutral (N), and Earth wires into their respective terminals. The diagram shows terminals labeled L, N, and a grounding symbol.

7. Step 7: Close Terminal Block

   Close the terminal block cover securely.

8. Step 8: Final Check

   Ensure the luminaire is fully and securely installed in the ceiling.

9. Step 9: Verify Installation

   Verify that the installation and electrical connections are correct. [Green checkmark emoji] indicates correct, [Red cross emoji] indicates incorrect.

10. Step 10: Completion

    The Resistex Miks LED downlight is now installed.