Resistex Miks LED Downlight

Safety Notes

• Never work when voltage is present on the luminaire.
• Installation must be performed by a professional installer in compliance with electrical installation standards and regulations.
• Risk of electrostatic discharges (ESD Norm). Handle with precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemicals or abrasives products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• Consult additional information about RESISTEX luminaires on the website www.resistex-sa.com.
• RESISTEX cannot be responsible for any misuse of the product.

Installation Steps

Step 1: Prepare Ceiling Opening

Prepare the ceiling by cutting a circular opening with a diameter of Ø69 mm (+/-1 mm).

Step 2: Insert Fixture

Insert the fixture into the prepared ceiling opening.

Step 3: Secure Fixture

Rotate the fixture to engage its mounting clips and secure it in place.

Step 4: Prepare Wiring

Prepare the electrical connections by opening the terminals on the provided connector block.

Step 5: Connector Detail

The connector block terminals are shown open, ready to receive wires.

Step 6: Insert Wires

Insert the power supply wires (Live, Neutral) into the appropriate terminals and close the levers to secure them.

Step 7: Terminal Connections

Detail of the terminal block showing connections for Live (L), Neutral (N). The Neutral wire is shown being inserted into the 'N' terminal and secured.

Step 8: Final Mounting

Gently push the fixture into the ceiling until it sits flush and is securely mounted.

Step 9: Connection Verification

A visual indicator shows correct electrical connection (represented by a smooth waveform) versus incorrect connection (represented by a spiked waveform).

Step 10: Installed Fixture

The Miks fixture is shown fully installed and flush with the ceiling surface.

Options and Features

Orientable / Adjustable

This fixture is orientable/adjustable, allowing for directional lighting. ?

Basse Luminance / Low Light

This fixture is designed for low luminance or diffused lighting, reducing glare. ?

Company Information & Certifications

Manufacturer: Resistex Exploitation

Address: 11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche, France

Contact: Tél. 04 93 276 276 | Fax 04 93 276 280 | Email: contact@resistex-sa.com

Website: www.resistex-sa.com

Certifications:

• ROHS Compliant
• IP65 Rated (Ingress Protection)
• IK07 Rated (Impact Protection)
• Class II Electrical Safety
• CE Marked