Resistex Miks LED Downlight

Product Features & Installation Types

Adjustable (Orientable)

This model allows for directional lighting. Installation involves attaching a ring to the fixture, inserting it into the ceiling cutout, and rotating to secure.

Low Light / Non-Adjustable

For standard, non-directional lighting. The fixture features integrated spring clips that engage with the ceiling material for secure mounting after insertion into the cutout.

Installation Steps

Follow these steps for a correct installation:

1. Prepare Opening

   Cut a circular opening in the ceiling with a diameter of Ø69 mm (+/-1 mm).

2. Insert Fixture

   Place the Resistex Miks fixture into the prepared ceiling opening. The fixture is equipped with spring clips that will engage with the ceiling material to hold it firmly.

3. Connect Wiring

   Open the fixture's connector block. Connect the electrical wires to the correct terminals: Line (L), Neutral (N), and Ground (⏚). Ensure wires are fully inserted for a secure connection. Close the connector block.

4. Final Check

   Verify that all connections are secure and the fixture is properly seated and flush with the ceiling surface.

Safety and Maintenance